How it Works
Fitbit
Loading...
FB406
User Manual
35 pgs1.66 Mb0

Fitbit FB406 User Manual

“LEPTON”
Product(Manual!
Version(1.0!
Model!FB406! !
Table of Contents
Getting Started ......................................................................................................................................... 1!
Moving the clasp from the large to small wristband .............................................. 1!
Inserting the tracker into the wristband ................................................................ 2!
Securing your wristband ........................................................................................ 3!
Setting up your Lepton ......................................................................................................................... 6!
Mac and PC requirements ...................................................................................... 6!
Downloading Fitbit Connect .................................................................................. 6!
Installing Fitbit Connect and pairing your Lepton .................................................. 6!
Syncing your Lepton .............................................................................................. 7!
Using your Lepton .................................................................................................................................. 8!
Goal tracking ........................................................................................................ 9!
Sleep mode ........................................................................................................... 9!
Charging ............................................................................................................... 9!
Updating ............................................................................................................... 9!
Alarms .................................................................................................................. 9!
Tracking your Fitness with Lepton .............................................................................................. 11!
Setting silent alarms from a computer ................................................................. 14!
Setting silent alarms from an iOS device .............................................................. 14!
Setting silent alarms from an Android device ...................................................... 14!
Dismissing silent alarms ..................................................................................... 15!
Using your Fitbit.com Dashboard ................................................................................................. 16!
Updating your Lepton ........................................................................................................................ 18!
Restarting your Lepton ...................................................................................................................... 20!
Fitbit Lepton General Info & Specifications .............................................................................. 21!
Regulatory & Safety Notices ............................................................................................................ 23!
Wireless sync dongle ........................................................................................... 27!
Surge ....................................................................... Error! Bookmark not defined.!
Cautions ............................................................................................................. 29!
Care and wearing tips ......................................................................................... 29!
Built-in battery precautions ................................................................................ 30!
1
Getting Started
What’s included
Your Fitbit Lepton Wireless Activity + Sleep Wristband box includes:
• Lepton tracker
• Charging cable
• Wireless sync dongle
• 1 small and 1 large wristband
Lepton tracker
Charging cable
Wireless sync
dongle
Wristbands
Putting on your Lepton
Your Lepton comes with a large and a small wristband. If you want to use the small wristband, complete the next task before continuing. If you want to use the large wristband, skip the next task and go directly to “Inserting the tracker into the wristband” on page 2.
Moving the clasp from the large to small wristband
If you choose the small wristband, you’ll need to remove the clasp from the large wristband and put it into the small wristband. To do so:
1. Push the clasp out with one thumb from the inside of the wristband.
2. Pull out the clasp.
2
3. Insert the clasp into the small wristband by pressing a few times with both thumbs to ensure that the clasp is flat and in line with the wristband.
NOTE: If there is a bulge on the inside of the band between the two inside prongs of
the clasp, find a small object like a credit card to push it flat.
Inserting the tracker into the wristband
Hold the tracker in your hand with the grey arrow facing up. Insert this end into the wristband, with the arrow pointing toward the holes in the wristband.
3
Securing your wristband
1. Put on the wristband so the window of lights are closest to the outside of your wrist and facing you.
2. Align both ends of the wristband so they are directly overlapping each other with the clasp over the two holes that best fit your wrist.
3. Squeeze both the clasp and the wristband between your thumb and forefinger until you hear a click.
4
You’ll know your Lepton wristband is securely fastened if both ends of the wristband are fully inserted.
NOTE: If you’re having trouble, try securing the wristband off your wrist to get a feel
for how it securely clasps and then try again on your wrist.
5
Care and wearing tips
Keep the following tips in mind when caring for your Lepton:
• Clean and dry the Lepton regularly, particularly under the band.
• Wear your Lepton band loosely enough to allow air circulation.
• Use skin care products sparingly on the areas of the wrist covered by the
Lepton.
• If you notice any signs of skin irritation or experience any discomfort, please discontinue use.
6
Setting up your Lepton
You can set up your Lepton using a computer or one of our mobile apps for iOS, Android, and Windows Phone.
Setting up your Lepton with a computer
To set up your Lepton using your computer, you’ll first install Fitbit Connect. Fitbit Connect is the software application that connects (“pairs”) your Lepton to your Fitbit.com dashboard, where you can view your data, log food, and more.
Mac and PC requirements
Software
Mac OS 10.5 or later Internet Connection
Hardware USB port
Software
Windows XP, Vista, 7, 8 Internet Connection
Hardware USB port
Downloading Fitbit Connect
1. Go to http://www.fitbit.com/setup.
2. Scroll down and click the pink Download button. If the button does not correctly show your type of computer (for example, if it says “Download for Mac” when you’re on a PC), choose the correct type before clicking the button.
3. You’ll be prompted to open or save the installation file. Choose to save the file.
Installing Fitbit Connect and pairing your Lepton
1. Plug your wireless sync dongle into your computer’s USB port and have your charged tracker nearby.
2. Find the file you just downloaded. If you don’t see it in your Downloads list, search for it using the file name:
- For Mac: Install Fitbit Connect.pkg
- For Windows: FitbitConnect_Win.exe
3. Once you find the file, double-click it to begin installing Fitbit Connect.
4. Follow the brief onscreen instructions to finish setting up. You’re ready to get moving.
7
Syncing your Lepton
Now that Fitbit Connect is installed, your Lepton will automatically and wirelessly sync with your computer every 20 minutes or so if the following requirements are met:
• Your Lepton is within 15-20 feet of your computer and has new data to upload (meaning if you haven’t moved, an automatic sync won’t occur).
• Your computer is powered on, awake, and connected to the Internet.
• The wireless sync dongle is inserted into a USB port and is recognized by the
computer.
When Lepton syncs, your data is uploaded to your Fitbit.com dashboard. Lepton holds detailed minute-by-minute information for the most recent 7 days and daily activity summaries for 30 days. For the most accurate dashboard possible, sync your Lepton regularly.
To manually synchronize your Lepton with your dashboard, click the Fitbit Connect icon located near the date and time on your computer and click Sync Now.
Setting up your Lepton with a mobile device
You can set up and wirelessly sync your Lepton using over 120 mobile devices that support Bluetooth 4.0 technology. To see if your mobile device is compatible for syncing with your Lepton, visit www.fitbit.com/devices. If your device is listed, you can then download our free iOS, Android, or Windows Phone apps. Once downloaded, open the app and follow the setup instructions provided.
NOTE: If your mobile device is not compatible to sync via Bluetooth 4.0, you can still
use the Fitbit app to view your data and track your progress, you’ll just need to set up and sync using a Mac or PC.
Loading...
+ 24 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use