Fisher & Paykel E522BRE4, E442BRXFDU5 Installation and Operating Instructions

ActiveSmart™ refrigerator	Installation instructions
Ice & Water and Non-Ice & Water	and User guide
E372B, E402B, E406B, E442B,
E522B, RF522W, RF522A,
RF610A & RF540A models

NZ AU GB IE EU AE HK SG

Important!

It is important that this User Guide is retained with your refrigerator for future reference. Should the appliance be sold or transferred to another owner, please ensure that the User Guide is left with the appliance. This will ensure that the new owner can familiarise themselves with the information and warnings contained within the Guide.

Contents
		1
Introduction	2
Safety and warnings	3
Installation instructions	7
Moving or storing your appliance	21
Door conversion	22
Soft closing refrigerator door feature	22
ActiveSmart™ operating instructions	23
All about the external display (Ice & Water models only)	27
Using your water dispenser (Ice & Water models only)	28
Water filter (Ice & Water models only)	29
Using your ice maker (Ice & Water models only)	31
ActiveSmart™ special features (all models)	33
Cleaning and caring for your refrigerator	36
Storing food in your refrigerator	40
Storing food in your freezer	42
ActiveSmart™ user warnings and sounds	44
Troubleshooting	45
Manufacturer’s Warranty	49
Customer Care	51
European directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE)	53
Filter performance data sheet	54

Important!

SAVE THESE INSTRUCTIONS

The models shown in this User Guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our website listed on the back cover or contact your local Fisher & Paykel dealer. Note that the word “refrigerator”, throughout this User Guide, refers to combination refrigerator/freezer products.

2 Introduction

Thank you for buying a Fisher & Paykel ActiveSmart™ refrigerator.

At Fisher & Paykel we are very proud of this refrigerator. This refrigerator combines size and storage space with the latest features and functions.

Thousands of hours of food care research and 75 years of refrigeration experience has been programmed into your refrigerator to give you the best possible performance.

We hope you enjoy your new refrigerator.

Refrigerator French door	Refrigerator door	Refrigerator door
and freezer drawer	and freezer drawer	and freezer door

Note: non Ice & Water models do not have an external water dispenser.

Fig.1 ActiveSmart™ refrigerators

Safety and warnings 3

WARNING!

Electric Shock Hazard

Read and follow the SAFETY AND WARNINGS outlined in this User Guide before operating this appliance.

Failure to do so can result in death, electric shock, fire or injury to persons.

Use this appliance only for its intended purpose as described in this User Guide.

Important safety precautions

Warning

When using this appliance always exercise basic safety precautions including the following:

Danger

■■Refer to the stability bracket and leaflet supplied to avoid hazard due to instability of the appliance.

■■This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

■■Young children should be supervised to ensure they do not play with the appliance.

■■The manufacturer’s installation instructions for product and cabinetry ventilation must be followed when installing the appliance.

■■Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

4 Safety and warnings

■■Do not use mechanical devices or other means to accelerate the defrosting process.

■■Do not damage the refrigerant circuit.

■■In case of damage to the refrigerant circuit, ventilate the area by opening all windows. Do not operate electrical equipment or any other equipment that may produce arcs, sparks or flames in the area. Contact your Fisher & Paykel Authorised Repairer immediately to arrange for the appliance to be repaired.

This refrigerator may contain the flammable

refrigerant isobutane.

R600a ( ).

■■It is hazardous for anyone other than an authorised service person to service this appliance. In Queensland the authorised service person must hold a gas work licence or authorisation for hydrocarbon refrigerants to carry our service or repairs which involve removal of covers.

Disposal

■■Extreme care must be taken when disposing your old appliance to avoid hazards:

–The refrigerant gas must be safely removed

–The doors should be removed and the shelves left in place so that children may not easily climb inside.

■■Your Fisher & Paykel Authorised Repairer will be able to give advice on environmentally friendly methods of disposing of your old refrigerator or freezer.

Safety and warnings 5

Cleaning

■■Many commercially available cleaning products contain solvents which may attack plastic components of your refrigerator and cause them to crack. Please refer to the cleaning care section of this booklet for further advice.

Electrical

■■This appliance must be installed in accordance with the installation instructions before use.

■■Never unplug your refrigerator by pulling on the power cord.

■■Always grip the plug firmly and pull straight out from the outlet.

■■Do not plug in any other appliance at the same power point as your refrigerator or use extension cords or double adapters.

■■Repair or replace immediately all electric service cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion along its length or at either the plug or appliance end.

■■If the power supply cord is damaged, it must only be replaced by your Fisher & Paykel Authorised Repairer because special purpose tools are required.

■■When moving your appliance away from the wall, be careful not to roll over or damage the power cord.

■■Do not use electrical appliances inside the food storage compartments of the appliance.

Important!

Your refrigerator is designed to operate for many years without the need for service checks. However, if your refrigerator is malfunctioning, have it attended to by your Fisher & Paykel Authorised Repairer as soon as possible. All electrical repairs must be carried out by an adequately trained service technician or qualified electrician.

6 Safety and warnings

Storing food and drinks

■■DO NOT store explosive substances such as aerosol cans with a flammable propellant in this appliance.

■■Never store volatile or flammable materials in your refrigerator as they may explode.

■■Never freeze liquids in glass containers. Liquid expands during freezing, which may cause the container to explode.

■■Never freeze carbonated drinks. They may explode.

■■Do not consume food if it is too cold. Food removed from the freezer compartment may be cold enough to cause damage when brought into contact with bare skin, eg frozen ice cubes.

Power failure – food safety

■■Do not refreeze frozen foods that have thawed completely. Follow the recommendations below if you discover food in your freezer has thawed:

1)Ice crystals still visible – food may be refrozen but should be stored for a shorter period than recommended.

2)Thawed but refrigerator cold – refreezing generally not recommended. Fruits and some cooked food can be refrozen but use as soon as possible. Meat, fish, poultry – use immediately or cook then refreeze. Vegetables – discard as they usually go limp and soggy.

3)Thawed and warmer than 5°C (41°F) – discard all food.

■■Do not refreeze frozen foods that have thawed completely. The food may be dangerous to eat.

SAVE THESE INSTRUCTIONS

Installation instructions
	7

Please follow the installation steps below to ensure your appliance operates correctly.

1.Power

■■The appliance must be installed so the plug is accessible.

■■To ensure that the appliance is not accidentally switched off, connect your refrigerator to its own power point. Do not plug in any other appliance at this power point or use extension cords and double adaptors, as the combined weight of both power cords can pull the double adaptor from a wall outlet socket.

■■For power requirements, refer to the information on the serial plate located at the front bottom right-hand side of the refrigerator when the door is open.

■■It is essential that the appliance is properly grounded (earthed).

2.Location

■■Your refrigerator should not be located in direct sunlight or next to any heat generating appliance such as a cooktop, oven or dishwasher.

3.Ice & Water (Ice & Water models only)

■■Your Ice & Water refrigerator must be installed by an authorised plumber or Fisher & Paykel Authorised Repairer as incorrect plumbing can lead to water leaks.

■■Fisher & Paykel Appliances does not accept responsibility for damage (including water damage) caused by faulty installation or plumbing.

8 Installation instructions

4. Ventilation and installation – Freezer door models

(E372B, E402B, E406B, E442B, E522B) (Ice & Water and non Ice & Water)

For all products with a freezer ‘door’ refer to page 8 – 9 for installation instructions. For all products with a freezer ‘drawer’ (RF522W, RF522A and RF610) refer to pages 10 – 11 for installation instructions.

■■To ensure adequate ventilation for your refrigerator or vertical freezer, see recommended cabinetry dimensions below.

■■If integrating your refrigerator, please follow installation instructions provided with the integration kits.

		Q
		Q
		R
D A
B	C	P

Flush with refrigerator door – full door rotation

		G
P	M	N
H/I
		T

Flush with refrigerator chassis – full door rotation

		E
P	M	M
F
		S

Flush with refrigerator door – 90° door rotation

		J
P	M	O
K/L

Note: these drawings and dimensions are also true for Ice & Water models.

				Installation instructions
										9
	Product dimensions (mm)			E372B	E402B	E406B	E442B	E522B
	A	overall height of flat door product		n/a	1715	n/a	1715	1715
	A	overall height of curved door product		1595	1695	1595	1695	1695
	A	overall height of curved door		n/a	n/a	n/a	n/a	1705
		with ice & water product
	B	overall width of product		635	635	680	680	790
	C	overall depth of flat door product		n/a	695	n/a	695	695
		(excludes handle, includes evaporator)
	C	overall depth of curved door product		715	715	715	715	715
		(excludes handle, includes evaporator)
	Cabinetry dimensions (mm) (including minimum clearances)
	D	inside height of cavity		1645	1735	1645	1735	1735
	Flush with refrigerator chassis – full door rotation
	E	inside width		675	675	720	720	830
	F	inside depth		620	620	620	620	620
	Flush with refrigerator door – full door rotation
	G	inside width		790	790	835	835	945
	H	inside depth flush to curved door		680	680	680	680	680
	I	inside depth flush to flat door		n/a	695	n/a	695	695
	Flush with refrigerator door – 90° door rotation
	(for full drawer/shelf access, the doors need to be open past 90°)
	J	inside width		745	745	790	790	900
	K	inside depth flush to curved door		680	680	680	680	680
	L	inside depth flush to flat door		n/a	695	n/a	695	695
	Minimum clearances
	M side clearance			20	20	20	20	20
	N	side clearance – hinge side		135	135	135	135	135
		flush with door – full rotation
	O	side clearance – hinge side		90	90	90	90	90
		flush with door – 90° rotation
	P	rear clearance (incl. evaporator tray)		30	30	30	30	30
	Q	vent – around top of cupboard (optional)		50	50	50	50	50
	R	top clearance – above refrigerator cabinet		50	50	50	50	50
	S	door clearance – hinge side		520	520	555	555	645
		flush with chassis – full rotation
	T	door clearance – hinge side		405	405	440	440	530
		flush with door – full rotation

10Installation instructions

5.Ventilation and installation – Freezer drawer models

(RF522W, RF522A, RF610A/RF540A) (Ice & Water and non Ice & Water)

RF522W

D A

B

	Q
	Q
	R
C	P

Flush with refrigerator chassis – full door rotation

		E
P	M	M
F
		S

Flush with refrigerator door – full door rotation

		G
P	M	N
H/I
		T

Flush with refrigerator door – 90° door rotation

		J
P	M	O
K/L

RF522A/RF610A/RF540A
		Q
		Q
		R
D A
B	C	P

Flush with refrigerator chassis – full door rotation

		E
P	M	M
F
		S

Flush with refrigerator door – full door rotation

		G
P	N	N
H/I
		T

Flush with refrigerator door – 90° door rotation

		J
P	N	O
K/L

Note: these drawings and dimensions are also true for Ice & Water models.

Installation instructions 11

To ensure adequate ventilation for your refrigerator see recommended cabinetry dimensions below.

				RF610/
Product dimensions (mm)		RF522W	RF522A	RF540A
A	overall height of product	1715	1715	1790
B overall width of product		790	790	900
C	overall depth of product (excludes handle, includes	695	695	695
	evaporator)

Cabinetry dimensions (mm) (including minimum air clearances)

	D	inside height of cavity		1735	1735	1810
	Flush with refrigerator chassis – full door rotation
	E	inside width		830	830	940
	F	inside depth		620	620	620
	Flush with refrigerator door – full door rotation
	G	inside width		945	1060	1170
	H	inside depth flush to curved door		–	–	–
	I	inside depth flush to flat door		695	695	695
	Flush with refrigerator door – 90° door rotation
	(for full drawer/shelf access, the doors need to be open past 90°)
	J	inside width		900	1015	1125
	K	inside depth flush to curved door		–	–	–
	L	inside depth flush to flat door		695	695	695
	Minimum clearances
	M side clearance			20	20	20
	N	side clearance – hinge side flush with door – full rotation		135	135	135
	O	side clearance – hinge side flush with door – 90° rotation		90	90	90
	P	rear clearance (incl. evaporator tray)		30	30	30
	Q	vent – around top of cupboard (optional)		50	50	50
	R	top clearance – above refrigerator cabinet		50	50	50
	S	door clearance – hinge side flush with chassis – full rotation		645	325	365
	T	door clearance – hinge side flush with door – full rotation		530	210	250

12Installation instructions

6.Connecting water (Ice & Water models only)

If your product is an Ice & Water model you must follow steps on pages 12 – 17.

Contents of filter kit

14 m (13 ft) white 6 mm (¼”) tubing

21 x 200 mm (8”) blue tubing

31 x pressure reducing valve (PRV)

41 x double sided foam

52 x locking keys

61 x water filter cartridge and head

71 x tap connection – 15 mm (½”) BSP

1

2

3

4

5

6

7

Fig.2 Water connection kit

Important!

■■The water connection to your Ice & Water refrigerator must be installed by an authorised plumber or Fisher & Paykel Authorised Repairer.

■■The water connection instructions below are intended only for the professional installer.

■■It is imperative the pressure reducing valve (PRV) is fitted upstream of the filter. If the PRV is not fitted to the connection line, the Ice & Water features may not function in some circumstances.

■■The new tubings supplied with the refrigerator are to be used. Old tubings should not be used.

■■Replacement parts are available through Customer Care or online at www.fisherpaykel.com (this service is available to selected markets only).

Installation instructions 13

Important!

■■DO NOT use with water that is microbiologically unsafe or of unknown quality.

■■WARNING – connect to potable water supply only.

■■DO NOT install on line pressure above 827 kPa (119 psi) or below 150 kPa (22 psi).

■■DO NOT use on hot water supply (25°C (77°F) max).

■■DO NOT cut any length of tube shorter than 200 mm (8”).

■■DO NOT install near electrical wires or water pipes that will be in the path of drilling when selecting the location of the filter system.

■■DO NOT mount the filter in such a position that it will be struck by other items, such as wastebaskets, etc.

■■DO NOT install the filter or any water tubing in direct sunlight as prolonged exposure to light can weaken plastic components.

■■DO NOT install the filter in a location that is susceptible to freezing temperatures as damage to the filter housing could occur.

■■DO NOT screw the filter to the refrigerator.

■■DO NOT install the filter or any water tubing in high temperature areas eg in a ceiling cavity.

■■AVOID contamination of pipes during installation.

■■DO NOT use copper tubing. The plastic tubing supplied should always be used.

■■DO NOT continuously dispense water for a period longer than 2 minutes.

14 Installation instructions

Installation instructions:

1Ensure the refrigerator is not plugged into a power supply.

2Locate isolation tap for water connection – cold water feed only (dishwasher or sink mixer taps). Tee and tap fitting not supplied.

3Connect the 200 mm (8”) blue tubing to the outlet of the PRV (blue collet) and the inlet connection of the water filter cartridge as shown in Diagram 1. Gently pull on both ends to ensure it is locked.

4Connect the white 6 mm (¼”) tubing to the outlet of the water filter cartridge as shown in Diagram 2. Gently pull to ensure it is locked.

5Measure the required length of tubing to run from the PRV to the water connection point (no less than 250 mm (10”)).

6Cut the tubing making sure the ends are square and clean.

7Connect the tubing to the tap connection and the base of the PRV (white collet) and then to the tap as shown in Diagram 3. Take care not to over-tighten the tap

connection. Please note that the tap connection supplied should fit most installation situations.

8Connect one locking key to each side of the water filter cartridge in between the cartridge and the locking collet as shown in Diagram 4.

9To flush the water filter of any trapped air, harmless carbon fines and to also check for leaks, aim the end of the tubing into a bucket, turn isolating tap on and run at least 10 L (10 qt) of water through. Once complete, turn isolating tap off.

10Locate desired position for water filter noting carefully the following points:

■■It is recommended to fit the water filter in a vertical orientation with the water filter head at the top. This will minimise water leakage when replacing cartridge.

■■Ensure the filter is in a convenient location to access every 6 months for replacement. We suggest that this location is beside the water filter supply tap in a cupboard beside the refrigerator.

■■A minimum clearance of 64 mm (2 ½”) from the bottom of the filter cartridge is required to perform cartridge removal.

■■Do not screw the water filter to the refrigerator.

Diagram 1

Fig.3 PRV connection

Diagram 2

Fig.4 Waterline connection

Diagram 3

Fig.5 Tap connection

INLE	T

Diagram 4

Fig.6 Locking key

Installation instructions 15

11Attach double sided foam to the back of the water filter head as shown in Diagram 5. Write the date to be replaced on the filter (date installed + 6 months). Remove double sided foam backing and attach filter to the desired position as located in step 10 (refer to previous page).

12Run the 6 mm (¼”) tubing to the back of the refrigerator ensuring there is enough tubing to pull the refrigerator out for service.

13Connect tubing into the water (solenoid) valve located on the right hand side of the unit (compressor) compartment as shown in Diagram 7. Beware of hot pipes.

14Pull gently on tubing to ensure it is locked in as shown in Diagram 8.

15 The completed installation should look like Diagram 9 on page 16.

Diagram 5

Fig.7 Double sided foam attachment

Diagram 7

Diagram 8

Fig.8 Waterline connection to refrigerator

Diagram 6

16Turn isolating tap on and check that all connections are dry and free of drips.

17Coil water line tubing behind the refrigerator. Push the refrigerator into place being careful not to kink or squash the water line running into the water (solenoid) valve.

18Read and follow pages 16 and 17 before using your ice and water system.

16 Installation instructions

Important!

■■All connections must be checked for leaks.

■■Ensure white 6 mm (¼”) tubing is routed away from sharp objects, sharp corners (beware of kinking tube as this will stop water flow), clear of the refrigerator unit compartment and not in a location where it can be squashed.

■■Ensure all push-fit connections are firmly pushed into place. The tube should be pushed in 16 mm (5/8”) before reaching the stop.

■■If tubing is removed at any point, re-cut the end and re-insert. Tubing must be fully inserted to avoid leaks.

■■To remove tube from connection points, turn off the isolating tap, push in the collet and gently pull tubing at the same time.

Diagram 9

Fig.9 Connection to water supply

The water filtration system is tested and certified by NSF International against NSF/ANSI Standard 53 for the reduction of Asbestos, Atrazine, Benzene, Cyst, Carbofuran, Lead, Lindane, Mercury, P-Dichlorobenzene, Toxaphene & Turbidity; against Standard NSF/ANSI 42 for the reduction of Chlorine Taste and Odour and Nominal Particulate Class I to a capacity of 2,838 Litres (750 gallons).