Fisher PDG-DWT50L, PDG-DWT50KL User Manual
© SANYO Electric Co., Ltd. 2007
• DLP is a registered trademark of Texas Instruments. BrilliantColor and DynamicBlack are trademarks of Texas Instruments.
• IBM is a trademark or registered trademark of International Business Machines Corporation.
• Macintosh, Mac OS X and PowerBook are trademarks of Apple, Inc., registered in the U.S. and other countries.
• Windows, Windows 98, Windows Me, Windows XP or Windows 2000 are trademarks or registered trademarks of Mi-
crosoft Corporation.
• Trademark PJLink is a trademark applied for trademark rights
in Japan, the United States of America and other coun-
tries and areas.
• Other
product and company names mentioned in this user's manual may be the trademarks or registered trademarks of
their respective holders.
Notes
(1) The contents of this user’s manual may not be reprinted in part or whole without permission.
(2) The contents of this user’s manual are subject to change without notice.
(3) The On-Screen Menu and figures in this manual may differ slightly from the product.
(4) Great care has been taken in the preparation of this use
r’s manual; however, should you notice any questionable
points, errors or omissions, please contact us.
(5) Notwithstanding article (3), SANYO will not be responsible for any claims on loss of profit or other matters deemed to
result from using the Projector.
To the Owner
Before installing and operating the projector, read this
manual thoroughly.
The projector provides many convenient features and
functions. Operating the projector properly enables you
to manage those features and maintains it in good condition for many years to come.
Improper operation may result in not only shortening the
product life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections
and try the solutions in the “Troubleshooting” section in
the back of this booklet. If the problem still persists, contact the dealer where you purchased the projector or the
service center.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.
Safety Precaution
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
− This projector produces intense light from the projection lens. Do not stare directly into the lens as much
as possible, otherwise eye damage could result. Be
especially careful that children do not stare directly
into the beam.
− Install the projector in a proper position. Otherwise it
may result in fire hazard.
− Allowing the proper amount of space on the top,
sides, and rear of the projector cabinet is critical for
proper air circulation and cooling of the unit. The dimension shown here indicates the minimum space
required.
If the projector is to be built into a compartment or
similarly enclosed, these minimum distances must be
maintained.
− Do not cover the ventilation slot on the projector.
Heat build-up can reduce the service life of your
projector, and can also be dangerous.
SIDE and TOP REAR
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
USER’S MANUAL WITH THIS UNIT.
NOTE: This symbol and recycle system are applied
only to EU countries and not applied to the
countries in the other area of the world.
Your SANYO product is designed and manufactured with high quality materials and
components which can be recycled and
reused.
This symbol means that electrical and electronic equipment, at their end-of-life, should
be disposed of separately from your house-
hold waste.
Please dispose of this equipment at your local community waste collection/recycling center.
In the European Union there are separate collection
systems for used electrical and electronic products.
Please help us to conserve the environment we live in!
READ AND KEEP THIS USER’S MANUAL FOR LATER
USE.
− If the projector is unused for an extended time,
unplug the projector from the power outlet.
CAUTION ON HANGING FROM THE CEILING
When hanging the projector from the ceiling, clean air intake vents, filters, or top of
the projector periodically with a vacuum
cleaner. If you leave the projector unclean
for a long time, the cooling fans can be
clogged with dust, and it may cause a
breakdown.
DO NOT SET THE PROJECTOR IN GREASY, WET, OR
CONDITIONS SUCH AS IN A KITCHEN TO PREVENT
A BREAKDOWN. IF THE PROJECTOR COMES IN
CONTACT WITH OIL OR CHEMICALS, IT MAY
BECOME DETERIORATED.
WARNING:
Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle que
définie dans la norme ANSI/NFPA 75 Standard for Protection of Electronic Computer/Data Processing
Equipment.
i
Safety Instructions
All the safety and operating instructions should be read
before the product is operated.
Read all of the instructions given here and retain them for
later use. Unplug this projector from AC power supply
before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will
prevent damage due to lightning and power line surges.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool,
etc...
Do not use attachments not recommended by the manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or
table. The projector may fall, causing serious injury to a
child or adult, and serious damage to the projector. Use
only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting
should follow the manufacturer’s instructions, and should
use a mounting kit approved by the manufacturers.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
Do not install the projector near the ventilation duct of airconditioning equipment.
This projector should be operated only from the type of
power source indicated on the marking label. If you are
not sure of the type of power supplied, consult your authorized dealer or local power company.
Do not overload wall outlets and extension cords as this
can result in fire or electric shock. Do not allow anything to
rest on the power cord. Do not locate this projector where
the cord may be damaged by persons walking on it.
Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
Unplug this projector from wall outlet and refer servicing
to qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by follow-
ing the operating instructions. Adjust only those
controls that are covered by the operating instructions as improper adjustment of other controls may
result in damage and will often require extensive
work by a qualified technician to restore the projector
to normal operation.
e. If the projector has been dropped or the cabinet has
been damaged.
f. When the projector exhibits a distinct change in per-
formance-this indicates a need for service.
Slots and openings in the back and bottom of the cabinet
are provided for ventilation, to ensure reliable operation
of the equipment and to protect it from overheating.
The openings should never be covered with cloth or
other materials, and the bottom opening should not be
blocked by placing the projector on a bed, sofa, rug, or
other similar surface. This projector should never be
placed near or over a radiator or heat register.
This projector should not be placed in a built-in installation such as a bookcase unless proper ventilation is
provided.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the projector.
When replacement parts are required, be sure the service technician has used replacement parts specified by
the manufacturer that have the same characteristics as
the original part. Unauthorized substitutions may result in
fire, electric shock, or injury to persons.
Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety
checks to determine that the projector is in safe operating
condition.
V
ii
oor de
Bij dit produkt zijn batt e rijen geleverd.
Wanneer dezeleeg zijn, moet u ze
niet weggooien maar inleveren als
KCA.
klant
en in
Neder
land
Important Information
Air Circulation
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked or
covered.
CAUTION
Hot air is from the exhaust vent. When using or installing
the projector, the following precautions should be taken.
− Do not put any flammable objects or spray cans near
the projector, hot air is exhausted from the air vents.
− Keep the exhaust vent at least 3 feet (1 m) away from
any objects.
− Do not touch peripheral parts in the exhaust vents,
especially screws and metallic parts. These areas will
become hot while the projector is used.
− Do not put anything on the cabinet. Objects put on
the cabinet will not only get damaged but may also
cause a fire hazard.
Cooling fans are provided to cool down the projector. The
fans’ running speed is changed according to the temperature inside the projector.
IMPORTANT!
Clean the Filter Regularly!!
The projector uses a lamp which generates significant
heat. The cooling fans and air vents are provided to dissipate the heat by drawing air into the housing and the
filter is located in the intake vents to prevent dust from
getting inside of the projector.
In order to care for the projector appropriately, regular
cleaning is required. Remove any dirt or dust that has
accumulated on the projector and on or in the filter.
When the “Please clean filter” message is displayed, stop
using the projector immediately and clean or replace the
filter.
Blocking the air vents and leaving the projector uncleaned for a long time may not only damage the projector and may require costly repairs but may also cause
accidents or fire.
For maintenance of the filter, refer to “Option” on page 83
and “Replacing the Filters” on pages 97 – 98.
Damages to the projector caused by using an
un-cleaned filter or improper maintenance will void
the warranty on the projector.
Installing the Projector in Proper Position
Install the projector properly. Improper installation may reduce the lamp lifetime and cause a fire hazard.
Do not tilt the projector
more than 10 degrees
above and below.
Do not point the projector
NO UPWARD
up to project an image.
NO SIDEWAYS
Do not point the projector
down to project an image.
NO DOWNWARD
Do not put the projector
on either side to project
an image.
iii
Compliance
F
ederal Communications
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
− Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
− Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
− Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes
or modifications should be made, you could be required to stop operation of the equipment.
Model Number(s) : PDG-DWT50L
Trade Name : Sanyo
Responsible party : SANYO FISHER COMPANY
Address : 21605 Plummer Street, Chatsworth, California 91311 U.S.A.
Telephone No. : (818)998-7322
Commission Notice
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories
(UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the
plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to
insert the plug into the outlet, contact your electrician.
AC Power Cord for the United Kingdom:
This cord is already fitted with a modulized plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should
the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus . If the fuse cover is
detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same color as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User
Instructions. If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed. The end of the flexible cord
should be suitably prepared and the correct plug fitted.
WARNING: A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET OUTLET.
The Wires in this mains lead are colored in accordance with the following code:
Green-and-yellow ············ Earth
Blue ································· Neutral
Brown ······························ Live
As the colors of the wires in the mains lead of this apparatus may not correspond with the colored markings identifying the terminals in
your plug proceed as follows:
The wire which is colored green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety
earth symbol or colored green or green-and-yellow.
The wire which is colored blue must be connected to the terminal which is marked with the letter N or colored black. The wire which is
colored brown must be connected to the terminal which is marked with the letter L or colored red.
WARNING: THIS APPARATUS MUST BE EARTHED.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
iv
Table of Contents
1. INTRODUCTION ..................................................................................................................................................................................1
WHAT’S IN THE BOX?.......................................................................................................................................................................... 1
INTRODUCTION TO THE PROJECTOR...................................................................................................................................................2
Features you’ll enjoy:........................................................................................................................................................................2
PART NAMES OF THE PROJECTOR .....................................................................................................................................................3
Front-right view..................................................................................................................................................................................3
Top view .............................................................................................................................................................................................4
Bottom view .......................................................................................................................................................................................5
TOP FEATURES ...................................................................................................................................................................................6
Lens Controls.....................................................................................................................................................................................6
OSD Controls and Status LEDs......................................................................................................................................................7
TERMINAL PANEL FEATURES .............................................................................................................................................................. 9
PART NAMES OF THE REMOTE CONTROL ........................................................................................................................................11
Battery Installation ..........................................................................................................................................................................13
Operating Range for Wireless Remote Control..........................................................................................................................14
Remote Control Precautions .........................................................................................................................................................14
Remote Control Codes...................................................................................................................................................................14
Using the Remote Control in Wired Operation ...........................................................................................................................15
Carrying the Projector ....................................................................................................................................................................16
2. INSTALLATION AND CONNECTIONS .........................................................................................................................................17
SETTING UP THE SCREEN AND THE PROJECTOR............................................................................................................................. 17
SELECTING A LOCATION....................................................................................................................................................................18
INSTALLING OR REMOVING THE OPTIONAL LENS .............................................................................................................................19
Removing the Existing Lens From the Projector........................................................................................................................19
Installing the New Lens..................................................................................................................................................................20
Installing the New Lens Using the anti-theft screw ....................................................................................................................21
THROW DISTANCE AND SCREEN SIZE .............................................................................................................................................. 22
INSTALLING THE OPTIONAL COLOR WHEEL ..................................................................................................................................... 24
MAKING CONNECTIONS.....................................................................................................................................................................26
Connecting Your PC or Macintosh Computer.............................................................................................................................26
Connecting an External Monitor....................................................................................................................................................28
Connecting Your DVD Player with Component Output.............................................................................................................29
Connecting Your VCR or Laser Disc Player ...............................................................................................................................30
CONNECTING THE SUPPLIED POWER CABLE ...................................................................................................................................31
NOTE ON THE POWER CORD...................................................................................................................................................31
3. PROJECTING AN IMAGE (BASIC OPERATION) ....................................................................................................................... 32
TURNING ON THE PROJECTOR.......................................................................................................................................................... 32
Note on Startup Screen (Menu Language Select screen)........................................................................................................33
SELECTING AN INPUT SOURCE .........................................................................................................................................................34
ADJUSTING THE PICTURE POSITION AND PICTURE SIZE.................................................................................................................. 35
Adjusting Picture Position Manually .............................................................................................................................................35
Lens Shift Adjustable Range.........................................................................................................................................................36
From the Remote Control Unit ......................................................................................................................................................37
Adjusting the Projector Level.........................................................................................................................................................38
OPTIMIZING AN RGB IMAGE AUTOMATICALLY .................................................................................................................................39
Adjusting the Image Using AUTO PC ADJ. ................................................................................................................................39
ADJUSTING VOLUME UP AND DOWN ................................................................................................................................................40
TURNING OFF THE PROJECTOR ........................................................................................................................................................41
About Direct Power Off...................................................................................................................................................................42
After Use...........................................................................................................................................................................................42
4. CONVENIENT FEATURES .............................................................................................................................................................. 43
TURNING OFF THE IMAGE AND SOUND.............................................................................................................................................43
FREEZING A PICTURE........................................................................................................................................................................43
ADJUSTING THE FOCUS/ZOOM MANUALLY....................................................................................................................................... 44
v
Table of Contents
Adjusting by Using the OSD Control Panel.................................................................................................................................44
CHANGING LAMP MODE .................................................................................................................................................................... 45
Changing Lamp Mode by Using the Projector's OSD Control Panel ......................................................................................45
Changing Lamp Mode by Using the Remote Control................................................................................................................46
GETTING INFORMATION..................................................................................................................................................................... 47
ADJUSTING POSITION/TOTAL DOTS/FINE SYNC ..............................................................................................................................48
Adjusting Position/Total Dots/Fine Sync by using the OSD Control Panel ............................................................................48
Correcting Keystone by Using the Remote Control...................................................................................................................49
PREVENTING THE UNAUTHORIZED USE OF THE PROJECTOR .......................................................................................................... 51
Locking the Projector...................................................................................................................................................................... 51
Unlocking the Projector ..................................................................................................................................................................53
USING THE PHYSICAL LOCK.............................................................................................................................................................. 54
Using the Kensington Lock............................................................................................................................................................54
Using the Security Chain Lock......................................................................................................................................................54
5. USING ON-SCREEN DISPLAY....................................................................................................................................................... 55
USING THE MENUS............................................................................................................................................................................55
Navigating the OSD........................................................................................................................................................................55
MENU TREE.......................................................................................................................................................................................57
MENU ELEMENTS ..............................................................................................................................................................................59
SOURCE MENU DESCRIPTIONS AND FUNCTIONS ............................................................................................................................. 60
ADJUST MENU DESCRIPTIONS AND FUNCTIONS ..............................................................................................................................61
Image menu .....................................................................................................................................................................................61
Image options menu .......................................................................................................................................................................62
Video menu......................................................................................................................................................................................64
DETAIL SETTINGS MENU DESCRIPTIONS AND FUNCTIONS .............................................................................................................. 67
Basic .................................................................................................................................................................................................67
White balance..................................................................................................................................................................................69
Color correction ...............................................................................................................................................................................70
SETTING MENU DESCRIPTIONS AND FUNCTIONS............................................................................................................................. 71
Basic .................................................................................................................................................................................................71
Installation ........................................................................................................................................................................................ 75
Network setting................................................................................................................................................................................82
Option ...............................................................................................................................................................................................83
INFORMATION MENU DESCRIPTIONS AND FUNCTIONS..................................................................................................................... 89
Usage time .......................................................................................................................................................................................89
Input ..................................................................................................................................................................................................90
Network.............................................................................................................................................................................................91
Version..............................................................................................................................................................................................92
RESET MENU DESCRIPTIONS AND FUNCTIONS................................................................................................................................93
6. MAINTENANCE .................................................................................................................................................................................94
CLEANING THE PROJECTOR ..............................................................................................................................................................94
Cleaning the Cabinet......................................................................................................................................................................94
Cleaning the Lens ...........................................................................................................................................................................94
Cleaning the Filters.........................................................................................................................................................................95
REPLACING CONSUMABLE PARTS .................................................................................................................................................... 97
Replacing the Filters.......................................................................................................................................................................97
Replacing the Lamps......................................................................................................................................................................99
Resetting the Lamp Time Counter..............................................................................................................................................101
Ordering a Replacement Lamp................................................................................................................................................... 101
7. APPENDIX ........................................................................................................................................................................................102
TROUBLESHOOTING ........................................................................................................................................................................102
Indicator Messages.......................................................................................................................................................................102
Common Problems and Solutions..............................................................................................................................................104
Tips for Troubleshooting ..............................................................................................................................................................104
IMAGE PROBLEMS ........................................................................................................................................................................... 105
vi
Table of Contents
Lamp Problems .............................................................................................................................................................................105
Remote Control Problems ...........................................................................................................................................................106
Audio Problems .............................................................................................................................................................................106
HAVING THE PROJECTOR SERVICED .............................................................................................................................................. 106
8. SPECIFICATIONS ........................................................................................................................................................................... 107
PROJECTOR SPECIFICATIONS......................................................................................................................................................... 107
Optical Specifications ...................................................................................................................................................................107
Electrical Specifications ...............................................................................................................................................................108
Mechanical Specifications ...........................................................................................................................................................109
Environmental Considerations .................................................................................................................................................... 109
Regulations .................................................................................................................................................................................... 109
Optional Parts................................................................................................................................................................................110
CABINET DIMENSIONS..................................................................................................................................................................... 111
PIN ASSIGNMENTS OF MINI D-SUB 15 PIN INPUT CONNECTOR .................................................................................................... 112
COMPATIBLE INPUT SIGNAL LIST.................................................................................................................................................... 113
PC CONTROL CODES AND CABLE CONNECTIONS......................................................................................................................... 115
Functional Execution Command Table......................................................................................................................................115
Status Read Command Table.....................................................................................................................................................116
SCREEN TRIGGER ........................................................................................................................................................................... 117
OPERATION USING HTTP BROWSER.............................................................................................................................................118
Overview.........................................................................................................................................................................................118
Preparation Before Use................................................................................................................................................................118
Handling of the Address for Operation by Using a Browser...................................................................................................118
Configuring Network Settings......................................................................................................................................................119
Structure of the HTTP Server......................................................................................................................................................121
15 PIN GPIO CONTROL .................................................................................................................................................................123
9. TROUBLESHOOTING CHECK LIST ...........................................................................................................................................124
vii
1. Introduction
What’s in the Box?
Carefully unpack the projector and check that the following items are included:
PDG-DWT50L Projector Remote Control
(with Two AA alkaline batteries)
Power Cable
(3.6m/11.8 ft.)
→ For North
America,
Europe and
the UK
Remote Cable
(10m/33ft)
VGA Cable
Quick Start Guide
Anti-Theft
CD-ROM
(This User’s manual)
Lens Hole Cap
(Installed)
Screw for lens
x 1
Security
Sticker
Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work.
CAUTION
Avoid using the projector in dusty environments.
1
1. Introduction
Introduction to the Projector
Features you’ll enjoy:
DLP projector with high resolution
The combination of BrilliantColor™ and a six-segment color wheel (optional) offer a more true color reproduction.
Installation Flexibility
This projector has many useful functions such as powered lens shifting, ceiling and rear projection, variety of extensive optional powered lens with bayonet mount with release button, etc.
Multiple Interface Terminals
The projector has several interface terminals that can support various types of equipment and signals.
Dual Lamp Control System
The two-lamp control system offers high brightness, maintained lamp life and energy savings along with redundancy. The
lamp control function offers brightness of the lamp can be selected. The power management function also reduces power
consumption and maintains lamp life.
Simple Computer System Setting
The projector has the Multi-scan system to conform to almost all computer output signals quickly. Up to UXGA resolution
can be accepted.
Security Function
The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on
the top control. PIN code lock functions prevent unauthorized use of the projector.
Multilanguage Menu Display
Operation menu is available in 8 languages: English, German, French, Italian, Spanish, Swedish, Chinese, and Japanese.
Multi-use Remote Control
Use the remote control as wired or wireless. Eight remote control codes are available.
3W + 3W Stereo Speaker
Built in 3W x 2 speakers are provided.
Helpful Maintenance Functions
The lamp and filter maintenance functions provide for better and proper maintenance of the projector. Easy maintenance
cover is provided for lamp and color wheel replacement.
Direct Power Off and On Start
The Direct Power Off function allows the projector to be turned off (even when projecting an image) using a power strip
equipped with a switch and a breaker. The On Start function allows the projector to be turned on by supplied AC power.
Note:
Before using Direct Power Off, be sure to allow at least 20 minutes immediately after turning on the projector
and starting to display an image. Also, the power cord can be removed immediately after turning off the projector. On Start manual may differ slightly from the product.
On Start eliminates the need to always use the POWER (ON/STANDBY) button on the remote control or
projector cabinet.
2
Part Names of the Projector
1. Introduction
Front-right view
ITEM LABEL DESCRIPTION SEE PAGE:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Important:
Grill openings on the projector allow for good air circulation, which keeps the projector lamp cool. Do not obstruct any of the grill
openings.
IR receiver Receiver for IR signal from remote control
Lamp cover Remove cover to replace lamp or color wheel
Lens control panel See Lens Controls
OSD control panel See OSD Controls and Status LEDS
I/O connector panel Connect various input devices
Intake vent Lamp cooling vent – do not obstruct
Speakers Built-in stereo speakers
Height adjuster Adjusts level of projector
Lens Remove lens cap before use
Lens release button Press the release button before removing the lens
Anti-Theft screw Prevent theft of the lens
Intake vent and front
filter
Keeps the front fan free of dust
– clean regularly for optimum performance
– do not obstruct
11
99
6
7
9
—
—
5
—
—
—
95
3
1. Introduction
Top view
ITEM LABEL DESCRIPTION SEE PAGE:
1.
2.
3.
4.
5.
6.
7.
Lens control panel See Lens Controls
Right-hand speaker Right-hand speaker
Lamp cover Remove cover to replace lamp or color wheel
Exhaust vent Exhaust vent – do not obstruct
OSD control panel See OSD Controls and Status LEDS
Rear intake vent Rear cooling intake – do not obstruct
Left intake vent Left-hand cooling intake – do not obstruct
6
—
99
—
7
—
—
8.
Left-hand speaker Left-hand speaker
—
4
Bottom view
1. Introduction
ITEM LABEL DESCRIPTION SEE PAGES:
1.
2.
3.
4.
5.
6.
7.
Height adjusters Adjust projection height
Intake vent Color wheel cooling vent – do not obstruct
Front filter
Ceiling support holes
Security chain
opening
Rear filter
Side filter
Keep the fan free of dust – clean regularly for optimum perform-
ance
Contact your dealer for information on mounting the projector on
a ceiling
Attach anti-theft device – see Using the Physical Lock
Keep the fans free of dust – clean regularly for optimum per-
formance
38
—
95
—
54
95
CAUTION
With ceiling installation, use approved mounting hardware & M4 screws; maximum depth of screw: 12 mm; distance from ceiling/ wall: 20 cm (0.7 feet) for proper ventilation; distance from
feet) front and back of the projector
. For permanent installations, follow local codes.
5
fluorescent lamps: at least 1 m (3
1. Introduction
Top Features
Lens Controls
ITEM LABEL DESCRIPTION SEE PAGE:
1.
2.
3.
4.
5.
6.
ZOOM Increase/decrease projected image size
UP CURSOR
RIGHT CURSOR
Move image left, right, up, or down
DOWN CURSOR
LEFT CURSOR
FOCUS Focus the projected image
44
44
6
OSD Controls and Status LEDs
1. Introduction
7
1. Introduction
ITEM LABEL DESCRIPTION SEE PAGE:
8.
9.
10.
11.
12.
13.
LAMP 1 (LED) See Indicator Messages
WARNING (LED) See Indicator Messages
POWER (LED) See Indicator Messages
AUTO PC ADJ. Optimize image size, position, and resolution
SELECT Select or change settings in the OSD
LEFT
CURSOR/VOLUME
DECREASE
Decrease volume
102
102
102
39
55
40
8
r Terminal Panel Features
1. Introduction
ITEM LABEL DESCRIPTION SEE PAGE:
1.
2.
3.
4.
5.
6.
7.
8.
COMPUTER 3 IN Connect the DVI-D cable (not supplied) from a computer
AUDIO IN
(COMPUTER 3)
AUDIO OUT Audio loop-thru
MONITOR OUT Connect to a monitor
R/C JACK Connect the remote to the projector
AUDIO IN
(COMPUTER 2)
AUDIO IN
[L(MONO)/R]
(COMPONENT)
SERIAL PORT IN Installation control
Connect the audio cable (not supplied) from the input device
Connect the audio cable (not supplied) from the input device
Connect an RCA audio cables (not supplied) from the input de-
vice right and left channels
26
—
—
—
15
—
—
115
9.
REMOTE IN For external control
123
9
1. Introduction
ITEM LABEL DESCRIPTION SEE PAGE:
10.
11.
12.
13.
14.
15.
16.
17.
When connected to the screen through
SCREEN
TRIGGER
S-VIDEO
POWER SWITCH Turn on/off the projector
AC IN Connect the supplied power cable
AUDIO IN
[L(MONO)/R]
(VIDEO)
VIDEO IN
COMPONENT IN
(Y, Cb/Pb, Cr/Pr)
COMPUTER 2 IN
(R/Cr, G/Y, B/Cb,
H, V)
cable, the screen deploy
tor. The screen retracts when the projector is powered off
(see notes below)
Connect a commercially available S-video cable from a video
device
Connect RCA audio cables (not supplied) from the input device
right and left channels. This audio jack is shared with S-Video
input.
Connect a composite video cable (not supplied) from a video de-
vice to the yellow RCA jack
Connect a component video enabled device
Connect RGBHV or Component signal from computer or com-
ponent video enabled device
s automatically on start up of the projec-
a commercially available
117
30
32,41
31
—
30
29
26
18.
19.
20.
21.
Note:
To use this feature, you must turn on the Screen Trigger function on the OSD.
Screen controllers are supplied and supported by screen manufacturers.
Do not use this jack for anything other than intended use. Connecting the wired remote control to the
Trigger mini jack causes damage to the remote control.
COMPUTER 1 IN Connect a VGA cable (supplied) from a computer
AUDIO IN
(COMPUTER 1)
LAN Connect a LAN cable (not supplied) from a computer
SERVICE
Connect the audio cable (not supplied) from the input device
Connect the USB cable (not supplied) from a computer. For ser-
vice personnel only.
26
—
—
10
Part Names of the Remote Control
ITEM LABEL LABEL ITEM
1.
2.
3.
4.
ON
STAND-BY
LIGHT
Illuminate the remote panel.
MENU
Open or close the on-Screen
menu.
1. Introduction
NO SHOW
Temporarily turns off screen
image.
D. ZOOM -/+
Zoom in/out function.
AUTO PC
Automatically adjust the
computer image.
KEYSTONE
Correct keystone distortion.
15.
16.
17.
18.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
CANCEL VOLUME -/+
VOLUME - COMPUTER 1
19.
20.
SELECT
Executes a selected menu
item
COMPUTER 2
VOLUME + COMPUTER 3
LENS SHIFT
Shift the lens up, down, right
and left.
FOCUS/ZOOM
Correct image distortion.
IMAGE
Select image mode
SCREEN
Select the screen size.
FREEZE
Freeze the picture.
LAMP CONTROL
Select a lamp mode.
COMPONENT
Select the component input
source.
S-VIDEO
Select the S-video input
source.
VIDEO
Select the video input
source.
IR TRANSMITTER
IR TRANSMITTER
REMOTE JACK
Connect a wired remote con-
trol.
21.
22.
23.
24.
25.
26.
27.
28.
11
1. Introduction
Important:
Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluorescent lights
can disrupt remote control operation.
1. Be sure nothing obstructs the path between the remote control and the projector. If the path between remote and projector is obstructed, you can bounce the remote signal off certain reflective surfaces such as
projector screens.
2. The buttons and keys on the projector have the same functions as the corresponding buttons on the remote control. This user’s manual describes the functions based on the remote control.
Note:
* To turn off the projector, press the STAND-BY button twice.
12
1. Introduction
Battery Installation
The Remote Control unit included with the projector does not contain batteries, though batteries are supplied as part of the
complete package. To insert (or replace) the batteries, refer to the following guide.
1.
2.
3.
Remove the battery compartment cover
by squeezing the locking catch and slid-
ing the cover in the direction of the
arrow.
Insert the supplied batteries taking note
of the polarity (+/-) as shown.
Replace the cover locator, and then
click locking catch into place as shown.
13
1. Introduction
Operating Range for Wireless Remote Control
Point the remote control toward the projector (to Infrared Remote Receivers) when pressing the buttons. Maximum operating range for the
remote control is about 16.4 feet (5 m) and 60 degrees in front and rear
of the projector.
Infrared remote receivers are provided both in front and back of the projector. You can conveniently use both of the receivers.
Remote Control Precautions
The following precautions ensure that the remote operates correctly and
safely.
• Use two (2) AA or LR6 type alkaline batteries.
• Always replace batteries in sets.
• Do not use a new battery with a used one.
• Avoid contact with water or liquid.
• Do not expose the remote control to moisture or heat.
• Do not drop the remote control.
• If the battery has leaked on the remote control, carefully wipe the
case clean and install new batteries.
• Risk of an explosion if battery is replaced by an incorrect type.
• Dispose of used batteries according to the instructions.
14
1. Introduction
Using the Remote Control in Wired Operation
Connect the supplied remote cable to the R/C jack on the projector (see Terminal Panel Features on page 9) and the
other end to the remote jack on the remote control (see item 1, Part Names of the Remote Control on page 11).
Note:
Connecting the remote cable to the R/C jack on the terminal panel will make the wireless operation unavailable.
15
1. Introduction
Carrying the Projector
Always carry your projector by the handle.
Before moving or carrying the projector, disconnect the power cable and any other cables that may be attached to it.
When moving the projector or when the projector is not in use, cover the lens with the lens cap.
To extend the projector handle, refer to the following guide.
1. Stand the projector on its end with the control panels at the bottom.
2. Lift the handle in the direction shown until it is fully extended.
Note:
Stand the projector on its end by lifting the cabinet. Do not use the handle to place the projector upright.
16
2. Installation and Connections
Setting Up the Screen and the Projector
This section briefly describes how to set up your projector and how to connect video and
audio sources.
Your projector is simple to set up and use. But before you get started, you must first:
• Set up a screen and the projector.
• Connect your computer or video equipment to the projector. See Making Connections on page 26.
• Connect the supplied power cable. See Connecting the Supplied Power Cable on page 31.
Note:
Ensure that the power cable and any other cables are disconnected before moving the projector. When
moving the projector or when it is not in use, cover the lens with the lens cap.
17
2. Installation and Connections
o Selecting a Location
Locating the projector correctly ensures optimum performance and a longer parts life.
Take note of the following when setting up the projector:
• The projector table or stand should be level and sturdy.
• Position the projector so that it is perpendicular to the screen.
• Ensure cables do not cause a trip hazard.
18
Installing or Removing the Optional Lens
• Do not shake or place excessive pressure on the projector or the lens components as the projector and
lens components contain precision parts.
• When shipping the projector with the optional lens, remove the optional lens before shipping the projector. The lens and the lens shift mechanism may encounter damage caused by improper handling during
CAUTION
transportation.
• Before removing or installing the lens, be sure to turn off the projector, wait until the cooling fans stop,
and turn off the main power switch.
• Do not touch the lens surface when removing or installing the lens.
• Keep fingerprints, dust or oil off the lens surface. Do not scratch the lens surface.
• Work on a level surface with a soft cloth under it to avoid scratching.
• If you remove and store the lens, attach the lens cap to the projector to keep off dust and dirt.
Removing the Existing Lens From the Projector
2. Installation and Connections
1.
2.
Pull out the lens cap.
Push the LENS RELEASE button all the way
in and rotate the lens counterclockwise.
The existing lens will be disengaged.
Note:
If the lens cannot be removed even by
using the LENS RELEASE button, the
anti-theft screw for lens may be in use
to secure the lens. If that is the case,
remove the anti-theft screw first.
19
2. Installation and Connections
3.
CAUTION
Pull out the existing lens slowly.
When Installing the lens into the projector, be sure to remove the lens cap from the back of the optional
lens before installing the optional lens into the projector. Failure to do so will cause damage to the projector.
Installing the New Lens
Insert the lens label side up.
1.
Rotate the lens clockwise until it
2.
clicks into place.
20
Installing the New Lens Using the anti-theft screw
Using the anti-theft screw to prevent theft of
the lens.
Tighten the supplied anti-theft screw on the
front bottom.
2. Installation and Connections
21
Loading...