Epson Stylus Pro 5000 User Manual

0 (0)

Important Information for

EPSON Stylus

RIP Users

Printing with Macintosh

For optimal printing performance, check these settings before you print:

❑ Make sure you set the Background Printing option to

in the Adobe® PostScript™ 8.5.1 printer driver.

In addition, open the File menu and select

Raster Spool Mode

❑ If you use the N-Up setting, be sure to select

drag and drop the file you created to the EPSON Stylus RIP Server to print.

Background

Preferences. Make sure

is turned off (the box should be unchecked).

Print to File, then

Printing in Windows® 95 and 98

EPSON Stylus RIP does not support the optional lower paper tray. You should always load paper in the upper tray or load it manually.

EPSON Stylus is a registered trademark of SEIKO EPSON CORPORATION.

CPD 9387 9/99

Uninstalling Your Software

To uninstall your non-PostScript printer driver in Windows 98, follow the instructions in “Uninstalling the Printer Software (Windows 95)” on page 8-42 in your Reference Guide. The instructions apply to both Windows 95 and 98.

For Macintosh users, follow these steps:

1. Insert the printer software CD-ROM in your drive.

2. Double-click the EPSON

3. At the printer driver installation screen, click

Installer icon.

Continue.

4. On the Installer screen, click the arrow in the list showing Easy Install, and select

5. Click the

Remove

6. After the software is uninstalled, click

Remove.

changes to Remove

button at the bottom of the screen.

on the Installer

Quit

window, then restart your computer.

To reinstall your software, see “Installing Your Software” on page 9.

Configuring for a Network

This section contains information not provided in your Setup Guide or Reference Guide. Before you can use your printer on

a network, you must configure your computer as described in this section.

Macintosh Users

To set up the printer so that you can use it on an AppleTalk network, you need an optional EPSON Ethernet interface card for your printer.

You’ll first need to install the printer software on all the computers (see page 9). Then follow these steps:

1. Turn on your printer.

2. Open the or a specific Ethernet slot.

3. If prompted, click

4. Open the the icon.

AppleTalk Control Panel and choose Ethernet

Chooser from the Apple menu and click

Save.

5. If you are using AppleTalk zones, select the zone you want to use. A list of all the printers connected to the selected zone appears on the right. Click the name assigned to the EPSON Stylus Pro 5000.

6. Turn on background printing if you want, then close the Chooser.

Windows 98 Users

If your computer is on a Windows 98 network and you want other users to share the printer connected to it, you need to set up the system connected to the printer (host system) so the printer can be shared and define a path to the printer on each client computer.

click the name assigned to your printer

Before following the steps in the next section, make sure you’ve installed the printer software on all the computers that will use the printer. See page 2-10 in your Setup Guide for instructions.

NOTE:

This section describes how to set up your computer to use a directly-connected printer as a shared printer on a network.

Setting Up the Host System

1. Click Start, point to Settings, and select Control Panel.

2. Double-click

Sharing

3. Click the

my printer(s)

4. In the Network window, click

Network, then click the File and Print

button.

I want to be able to allow others to print to

checkbox and click OK.

OK.

NOTE:

If a dialog box requesting the Windows 98 CD-ROM appears, insert the CD-ROM in the drive, then follow the on-screen messages.

If a dialog box appears requesting you to restart your computer, do so. Then continue with step 5.

5. In the Control Panel, double-click

Printers.

6. Right-click the

Sharing

7. Click the

on the File menu.

Shared As

EPSON Stylus Pro 5000

radio button. Then enter a Share

icon, then click

Name, Comment, and Password as necessary, and click

Setting Up Client Systems

1. Click Start, point to Settings, and select Printers.

2. Right-click the

Properties.

3. Click the

4. Click the

EPSON Stylus Pro 5000 icon and choose

Details tab.

Add Port button, then click Browse to specify

the network path to the printer.

NOTE:

To print from DOS applications as well as Windows applications, click the Capture Printer Port button instead of Add Port. Select the printer port in the Device list, then specify its network path. Select Reconnect at logon, then click OK.

5. When you return to the Details tab, click

OK.

Options and Consumables

This section describes options not listed in your Setup Guide.

EPSON Type B IEEE-1394 (FireWire) Interface Card

This interface card (C823722) provides up to a 400 Mbps data transfer rate between your Macintosh and high-speed devices. It also features automatic configuration, and eliminates any need to turn off or restart your Macintosh when attaching a new device. Based on the print engine performance, there will not be a significant performance difference between the FireWire, USB, serial, or parallel interfaces.

EPSON RS-5000 Fiery® LX RIP

EPSON and EFI® have joined forces to offer an optional standalone Fiery LX RIP (C850071) for the EPSON Stylus Pro 5000. It gives you the power to simultaneously spool, RIP, and print jobs over your entire network, plus complete WebTools

EPSON Type B 10BaseT/100BaseTX Ethernet Interface Card

™

and sophisticated color management.

The EPSON Type B 10BaseT/100BaseTX Ethernet Interface Card (C823632) allows you to connect your EPSON printer directly to a network.

EPSON Professional Quality Media

EPSON papers are your best choice for everyday printing, including presentations, graphic arts comps and layouts, professional-level digital photography, and fine art printing. Refer to the Setup Guide and Reference Guide for a complete list.

For use in prefilm proofing, the best choice is DuPont Professional Proofing Paper. With the support of a RIP, these papers simulate the texture and background color of popular printing stocks.

• DuPont/EPSON Commercial Grade Stock—Bright

White Glossy Super B Size (13 × 19 inches, 100 sheets) S041160

DuPont/EPSON Commercial Grade Stock—Matte

•

Super B Size (13

× 19 inches, 100 sheets) S041203

Super B Size (13 × 19 inches, 20 sheets) S041201

• DuPont/EPSON Publication

Super B Size (13 × 19 inches, 100 sheets) S041207 Super B Size (13

19 inches, 20 sheets) S041205

Print Engine Memory Buffer

The standard buffer provides 64KB of memory and is upgradeable to 96MB. It uses standard 70ns SIMMs Fast Page Mode only (three available slots). Any extra memory buffer can be used for client-free printing of multiple copies only. However, not all resolutions support multiple-copy mode. Memory for the EPSON Stylus Pro 5000 is not available through EPSON; contact your reseller for information.

/EPSON

Trademarks

EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION.

EPSON SoundAdvice is a service mark and DX3, EPSON FaxAdvice, and SelecType are trademarks of Epson America, Inc.

EFI, the EFI logo, Fiery, and the Fiery logo are U.S. registered trademarks of Electronics for Imaging, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.

Legal Notices

Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION’s operating and maintenance instructions.

SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION.

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON printer. EPSON is not responsible for any use of this information as applied to other printers.

CPD 9241 8/99

Printer Guide

EPSON® Stylus® Pro 5000

Printed on recycled paper with at least 10% post-consumer content.

EPSON

Trademarks

SEIKO EPSON CORPORATION

printer.

EPSON

is not responsible for any use of this information as applied to other printers.

. The information contained herein is designed only for use

EPSON and EPSON S

EPSON

SoundAdvice and

tylus are registered trademarks of

EPSON

FaxAdvice are trademarks of Epson America, Inc.

SEIKO EPSON CORPORATION

EFI, the EFI logo, Fiery, and the Fiery logo are U.S. registered trademarks of Electronics for Imaging, Inc.

General Notice

their respective owners.

NERGY STAR

The E

: Other product names used herein are for identification purposes only and may be trademarks of

EPSON

disclaims any and all rights in those marks.

emblem does not represent EPA endorsement of any product or service.

Legal Notices

Neither

SEIKO EPSON CORPORATION

nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with

SEIKO EPSON CORPORATION

or any consumable products other than those designated as Original Products by

Part Number:

SEIKO EPSON CORPORATION

CPD-6201 3/98

SEIKO EPSON CORPORATION

’s operating and maintenance instructions.

shall not be liable for any damages or problems arising from the use of any options

EPSON

Products or

EPSON

Approved

FCC Compliance Statement For United States Users

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING

The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

For Canadian Users

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le materiel brouilleur du Canada.

Contents

Introduction_______________________________________

How To Use Your Manuals

Using This Printer Guide 3

Warnings and Cautions Where To Get Help ENERGY STAR Compliance

Energy-saving Tips 5

Important Safety Instructions

Chapter 1: Setting Up the Printer ___________________

Unpacking the Printer Installing the Optional Lower Paper Cassette Installing the Paper Tray Installing the Ink Cartridges Loading Paper Running a Printer Check Aligning the Print Head

1-1 1-3 1-5 1-5

1-8 1-14 1-15

3 4 5

Chapter 2: Printing on Various Substrates ___________

Selecting a Paper Path Using the Standard and Optional Paper Trays

Setting the Paper Tray Levers 2-3 Paper Tray Tips 2-5 Loading Paper in the Optional Lower Tray 2-6

Using the Front Manual Feed Slot Using the Rear Manual Feed Slot Printing on EPSON Paper and Film

Printing Tips for EPSON Media 2-11

2-1

2-2

2-7

2-8 2-10

vi Table of Contents

Chapter 3: Monitoring the Printer ___________________

Responding to the Control Panel Lights 3-1 Clearing Paper Jams 3-3

Chapter 4: Maintaining and Transporting the Printer

Running a Cleaning Cycle 4-1 Running a Printer Check 4-2 Replacing an Ink Cartridge 4-3 Cleaning the Paper Paths 4-6 Cleaning the Printer 4-7 Transporting the Printer 4-8

Chapter 5: Troubleshooting ________________________

Diagnosing Problems 5-1 Improving Print Quality 5-2 Solving General Printing Problems 5-4 Solving Paper or Other Substrate Problems 5-5

Appendix A: Switching Paper Trays _________________

Appendix B: Specifications _________________________

Printing B-1 Paper B-2 Ink Cartridges B-5 Mechanical B-6 Electrical B-7 Environmental B-7 Safety Approvals B-7 Interfaces B-8

Parallel interface B-8 Serial interface B-9

Index _____________________________________________

Introduction

The EPSON® Stylus® Pro 5000 color ink jet printer is the key component in a revolutionary new digital color proofing system. The printer provides resolutions up to 1440 × 720 dpi and MicroPiezo DX3 print head technology, for unsurpassed image quality with line art and text comparable to imagesetter output. Proprietary ASICs (application-specific integrated circuits) ensure consistent printing and color accuracy from job to job and printer to printer.

EPSON’s quick-drying CMYK inks print in rich, vibrant colors on a variety of substrates, from plain papers to proofing grade media. Individual, high-capacity ink cartridges with auto ink-level detection provide increased productivity, east of use, and low per-copy printing costs.

The EPSON Stylus Pro 5000’s media handling flexibility lets you print on substrates from 4 × 6 inches up to 13 × 19 inches, including 200 lb card stock. With a standard 250-sheet paper tray and optional 250-sheet cassette, you get uninterrupted performance. Fast print speeds let you print a full bleed, 11 × 17 inch photo quality proof or comp in about 15 minutes.

The high performance RIP Station 5000 (RS 5000) PostScript supports a variety of network configurations and protocols, with full compatibility for

Macintosh, EFI Fiery processing, and printing. Standard base color rendering dictionaries for 3M MatchPrint proofing.

Microsoft® Windows® 95, Windows NT, and UNIX® computers. The

RIP provides full multitasking for simultaneous spooling, PostScript

™

III, Fuji® Color-Art, and DuPont® WaterProof simulate analog-quality

Level 3 server

™

2 How To Use Your Manuals

How To Use Your Manuals

This guide is part of a set, which also includes the following documentation for users and system administrators:

•The Read This First roadmap provides easy-to-follow steps for setting up your printer and RIP and connecting them to your network.

• The RS 5000 Setup Guide describes how to unpack the RIP, install user software and printer files from the User Software CD, and set up printing. It also describes how to install printer files from the RS 5000 via the Internet.

• The RS 5000 User Guide describes how to set printing options and print to the RS 5000. It includes software instructions for both Windows and Mac OS computers.

• The RS 5000 Administrator Guide explains basic configuration and administration of the RIP for the supported platforms and network environments. It also includes guidelines for setting up UNIX, Windows NT, and NetWare

servers to provide

PostScript printing services to clients.

• The RS 5000 Color Printing Guide provides an introduction to the basics of color theory and printing to the EPSON Stylus Pro 5000. It includes practical color printing tips and application-specific instructions for Macintosh and Windows.

• Release Notes provide last-minute product information and workarounds for some of the problems you may encounter.

3 Warnings and Cautions

Using This

This Guide contains the following information:

Chapter 1 explains how to unpack and set up the printer.

Chapter 2 gives instructions for printing on a variety of substrates through the

available paper paths and for using special EPSON media.

Chapter 3 explains what to do when the printer’s control panel lights indicate a paper jam or other problem.

Chapter 4 gives instructions for replacing ink cartridges, running print head cleaning cycles, and cleaning and transporting the printer.

Chapter 5 provides troubleshooting tips and solutions for any printing problems you may have.

Printer Guide

Appendix A describes how to switch paper tray covers, if you want to use the optional lower paper tray in the standard paper tray slot.

Appendix B provides the technical details on your printer, ink cartridges, and EPSON media.

An Index is included at the end of the book.

Warnings and Cautions

You’ll find this information throughout your manual:

• Warnings must be followed carefully to avoid bodily injury.

• Cautions must be observed to avoid damage to your equipment.

Electronic support services

4 Where To Get Help

Where To Get Help

EPSON provides technical support and information on the installation, configuration, and operation of professional graphics arts products through the EPSON Preferred Protection Plan. Dial (888) 377-6611, 6 A.M. to 8 P.M., Pacific Time, Monday through Friday, and 7 A.M. to 4 P.M., Pacific Time, Saturday and Sunday.

Before you call, make sure you have your Unit ID number, which is included with the EPSON Preferred Protection Plan information that came with your printer.

EPSON also provides customer support through the following services:

Service Access

World Wide Web From the Internet, you can reach EPSON’s Professional Graphics Home Page at

http://prographics.epson.com

EPSON Internet FTP Site If you have Internet FTP capability, use your Web browser (or other software for FTP

downloading) to log onto

address

EPSON Download Service You can call the EPSON Download Service at

software to 8 data bits, 1 stop bit, no parity. Modem speed can be up to 28.8 Kbps.

EPSON Forum on CompuServe

Members of CompuServe can type America Forum. For a free introductory CompuServe membership, call (800) 848-8199 and ask for representative #529.

as the

password

ftp.epson.com

with the user name

(800) 442-2007

GO EPSON

at the menu prompt to reach the Epson

anonymous

. Set your communications

and your

Automated telephone services

Service Access

EPSON SoundAdvice

EPSON FaxAdvice

™

Pre-recorded answers to commonly asked questions about EPSON products 24 hours a day, seven days a week, call

Access EPSON’s technical information library by calling provide a return fax number to use this service.

(800) 442-2110

. You must

e-mail

EPSON Referral Service For the location of your nearest Authorized EPSON Reseller, call

(800) 241-5373

5 ENERGY STAR Compliance

You can purchase ink cartridges, paper and other substrates, manuals, accessories, and parts from EPSON Accessories at (800) 873-7766 (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral.

ENERGY STAR Compliance

As an ENERGY STAR Partner, EPSON has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

The EPA ENERGY STAR Office Equipment program is a voluntary partnership with the computer and office equipment industry to promote the introduction of energyefficient personal computers, monitors, printers, fax machines, and copiers in an effort to reduce air pollution caused by power generation.

Energy-saving Tips

Here are a few tips you can use to be even more energy-wise:

• If your monitor isn’t ENERGY STAR compliant, turn it off when you’re not using it.

• Turn off your computer, printer, and monitor each day when you are done using them.

• Use the print preview option in your software so you can catch errors before you print something.

• Send e-mail rather than distributing memos. Not only is this faster, but you’ll save paper and storage space too.

6 Important Safety Instructions

Important Safety Instructions

Before using your printer and RIP, read the following safety instructions to make sure you use the equipment safely and effectively.

• Turn off and unplug the printer and RIP before cleaning. Clean with a damp cloth only. Do not spill liquid on the printer or RIP.

• Do not place the printer or RIP on an unstable surface or near a radiator or heating vent.

• Place the printer and RIP on a flat surface. They will not operate properly if they are tilted or at an angle.

• Do not block or cover the openings in the printer’s or RIP’s cabinet or insert objects through the slots.

• Use only the type of power source indicated on the label.

• Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off.

• Place the printer and RIP near a wall outlet where the plugs can be easily unplugged.

• Placez l’imprimante près d’une prise de contacte où la fiche peut être débranchée facilement.

• Do not let the power cords become damaged or frayed.

• If you use an extension cord, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure the total of all devices plugged into the wall outlet does not exceed 15 amperes. Use of extension cords is not recommended.

• Except as specifically explained in the documentation, do not attempt to service the printer or RIP yourself.

• Unplug the printer or RIP and refer servicing to qualified service personnel under the following conditions:

If the power cord or plug is damaged; if liquid has entered the printer or RIP; if the equipment has been dropped or the cabinet damaged; if the printer or RIP does not operate normally or exhibits a distinct change in performance. Adjust only those controls that are covered by the operating instructions.

7 Important Safety Instructions

Even if you are familiar with other types of printers, be sure to read through the following list of precautions before operating your ink jet printer:

• Do not put your hand inside the printer or touch the print head during printing. Do not move the print head by hand.

• Under normal circumstances, ink will not leak out of the cartridges. If it does get on your skin, wash it off with soap and water. If it gets in your eyes, flush them immediately with water.

• Keep ink cartridges out of the reach of children.

• Do not dismantle the ink cartridges or try to refill them. This could result in damage to the print head.

• Once you install an ink cartridge, do not remove the cartridge except to replace it with a new one (or transport the printer).

• Install the ink cartridge immediately after you remove it from its package. Leaving the cartridge unpacked for a long time before use may result in reduced print quality.

• Do not use an ink cartridge beyond the date printed on the cartridge carton. For best results, use up the ink cartridges within six months of installing them.

• Do not shake an ink cartridge; this can cause leakage.

• Always turn the printer off using the pressed, the

Operate

light flashes briefly then goes out. Do not unplug the printer

or turn off the power to the outlet until the

POperate

Operate

button. When this button is

light is off.

• Before transporting the printer, make sure the print head is in the far right position and the ink cartridges have been removed.

1-1 Unpacking the Printer

Chapter 1: Setting Up the Printer

To set up your EPSON Stylus Pro 5000, you need to unpack it and install the paper tray(s) and ink cartridges. Then you need to load paper, run a printer check, and align the print head. This chapter covers the following information:

• Unpacking the printer

• Installing the optional lower paper cassette

• Installing the paper tray

• Installing the ink cartridges

•Loading paper

• Running a printer check

• Aligning the print head

Unpacking the Printer

Here’s what is included in the box:

paper size and media type cards

printer

paper tray

ink cartridges

1-2 Setting Up the Printer

AUTION

printer alone.

OTE

for unpacking and setup instructions. The optional lower paper cassette is also packed in a separate box.

UNPACK THE PRINTER

1. Follow the instructions on the Notice Sheet to remove the tape and protective materials.

Save all packaging so you can use it if you need to transport the printer later.

2. Locate the printer on a flat, stable surface near a grounded outlet.

Do not use an outlet controlled by a wall switch or timer, or the same circuit as a large appliance. This may disrupt the power, which can erase the printer’s memory and damage the power supply.

3. Leave plenty of room in back to access the manual feed slot and enough room in front for removing the paper tray.

The printer weighs approximately 50 lb. Do not try to lift or carry the

The RS 5000 is packed in a separate box. See the RIP Station 5000 Setup Guide

4. Do not put the printer:

• In an area with high temperature or humidity

• In direct sunlight or dusty conditions

• Near sources of heat or electromagnetic interference, such as loudspeakers or

cordless telephone base units

If you purchased the optional lower paper cassette, you need to place the printer on top of it. Follow the instructions in the next section to install the lower cassette.

Be sure to follow the Safety Instructions in the Introduction.

OTE

1-3 Installing the Optional Lower Paper Cassette

Installing the Optional Lower Paper Cassette

The lower paper cassette provides an additional paper source, so you can have two different substrates available for printing at all times. If you didn’t purchase the optional lower cassette, skip to the next section and install the standard paper tray.

INSTALL THE LOWER CASSETTE

1. Unpack the cassette and paper tray.

Follow the illustrated sheet in the box to remove the tape and protective materials.

2. Place the cassette where you want to use the printer, with the paper tray slot facing forward.

3. Place your printer on top of the cassette as shown:

Hold the bottom of the printer at the depression on the sides so your

ARNING

fingers don’t get caught between the printer and the cassette.

1-4 Setting Up the Printer

4. Attach the printer and cassette using the two screws that come with the cassette.

Use the hexagonal wrench that comes with the cassette to tighten the screws.

ARNING

screws; otherwise the cassette and printer may come apart and cause injury. If you need to move the printer after you attach the cassette, see the illustration below. Have one person on each side of the printer hold the bottom of the cassette at the depression.

Do not try to move the paper cassette or printer without securing the

1-5 Installing the Paper Tray

Installing the Paper Tray

Insert the paper tray into the slots at the front of the printer as shown below:

AUTION

Smudges and dirt on the pad may cause a paper feeding problem.

If you installed the lower paper cassette, insert the paper tray that came with it.

Be careful not to touch the black pad at the right end of the paper tray.

Installing the Ink Cartridges

Always use new ink cartridges. Reinstalling partially empty ink cartridges prevents the ink counter from accurately indicating the amount of ink remaining.

INSTALL THE INK CARTRIDGES

1. Plug in the printer and turn it on by pressing the

Press the button and hold it for a second until the

then turn off. This is normal operation.

The first time you plug in the printer, the power supply may cycle the fan and

OTE

P Operate button.

P Operate

light comes on.

1-6 Setting Up the Printer

yellow

magenta

2. Open the left and right ink cartridge compartment doors.

black

cyan

the specified ink color:

3. Open one of the ink cartridge packages.

If ink gets in your eyes, flush them immediately with water.

4. Lift up the ink cartridge clamp for the corresponding ink slot.

You can install the ink cartridges in any order; however, each slot can only hold

OTE

If ink gets on your hands, wash them thoroughly with soap and water.

ARNING

To avoid injury, do not reach into the ink cartridge compartments.

+ 60 hidden pages