SC-P800 Series
Turning On
A
B
EN
TC
Unpacking
拆開包裝
Start Here
安裝說明
Contents may vary by location.
內容物可能會依地區而有不同。
© 2015 Seiko Epson Corporation.
All rights reserved.
Printed in XXXXXX
Do not open the ink cartridge package until you are ready to install it in the printer.
在準備好要安裝於印表機之前，請勿拆開墨水匣包裝。
開啟電源
2
Installing the Ink
Cartridges
安裝墨水匣
Connect and plug in.
連接並插入。
For the initial setup, make sure you use the ink
cartridges that came with this printer. These
cartridges cannot be saved for later use.
進行初始設定時，請確定使用的是此印表機隨附的墨
水匣。這些墨水匣不能貯存供日後使用。
Turn on and tilt.
開啟並掀起。
The initial ink cartridges will be partly used to charge the print
head. These cartridges may print fewer pages compared to
subsequent ink cartridges.
最初使用的墨水匣有部分墨水將用於填充列印頭。 這些墨
水匣的列印頁數可能會比後續使用的新墨水匣還少。
A
1
B
3
A
Select a language.
選擇語言。
C
E
B C
Unlocked after 45 sec.
45秒後解鎖。
F
Shake and unpack.
輕輕搖動並拆開包裝。
D
Push (Click).
按下 (按一下)。
Remove all protective materials.
拆開所有保護材料。
Close.
關閉。
Wait about 6 min.
約等候6分鐘。
Loading...