Page 1
EH-LS650B/EH-LS650W
Quick Setup
IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User’s Guide.
Note:
Your product may differ from the illustrations on this sheet, but the
•
instructions are the same.
Availability of products, product features, and/or accessories varies by region.
•
Contents
Remove all packing materials and make sure your projector box includes all of
these parts:
Connect the projector
Android TV
Your projector includes built-in Android TV with apps that can be launched
when the remote control is paired to the projector. To stream content, make
sure you have a wireless internet connection and an active streaming account
and log in as necessary for each app.
Chromecast built-in
You can stream content from devices using Chromecast™-compatible apps. See
the online User’s Guide for details.
Google Assistant
You can send voice commands to the projector using the remote control. See
the online User’s Guide for details.
®
TM
TM
You can place the projector on almost any flat surface. See the online User’s
Guide for more information.
Placing the projector
Before proceeding with setup, move the furniture you will place the projector
on to its final location. This will give the furniture time to settle into the floor
as needed, which is especially important for softer surfaces like carpets and
rugs.
Note: The distance from the top of the projector to the bottom of the
projected image is 9.3 inches (23.5 cm) for a 100-inch image and 11.6 inches
(29.4 cm) for a 120-inch image.
Place the furniture based on the distance measurements indicated below.
1
Wall or screen
B
A
Note: This feature may not be available in all regions.
Video device or computer
You can connect video equipment or a computer. Connect one end of an HDMI®
cable (not included) to one of the projector’s HDMI ports and the other end to
an HDMI port on your video device or computer. See the online User’s Guide for
details.
Caution: Do not turn on the video source before connecting it to the projector;
you may damage the projector.
HDMI cable
Note:
Some external video sources may require an optional HDMI adapter cable.
•
If you are connecting an external audio/video receiver to the projector, use
•
the projector’s HDMI2 (eARC/ARC) port. See the online User’s Guide for more
information.
If you are connecting using ARC or eARC, you must use a High Speed HDMI
•
Cable with Ethernet.
For more information on connecting the projector to your computer or other
•
devices (camera, USB flash drive, etc.), see the online User’s Guide.
HDMI
Furniture
Distance from wall or screen to: 100-inch image 120-inch image
A - Front of projector 26.6 inches (67.6 cm) 31.6 inches (80.2 cm)
B - Rear of projector 10.9 inches (27.6 cm) 15.8 inches (40.2 cm)
If your furniture has adjustable feet, use them to level the furniture (allow
2
time for settling as needed).
Place the projector on top of your furniture and align it with the expected
3
center of the wall or screen you will project onto.
Connect audio
Built-in speakers
The projector has built-in speakers that can play audio from the video source
you are viewing.
You can also use the projector’s speakers to play sound from a device connected
®
via Bluetooth
Optical Out audio port
You can connect the projector to an amplifier or speakers through the Optical
Out port. See the online User’s Guide for more information.
Note: The Optical Out volume level is not controlled by the projector’s remote
control. See the online User’s Guide for more information.
. See the online User’s Guide for details.
Optical cable
Page 2
Turn on your projector
Note: If you are projecting from an external video device or a computer, make
sure it is connected to the projector first and turn it on after the projector is
turned on.
Install the batteries in the remote control.
1
Plug in the projector.
2
Remove the focus lever cover.
3
Move the focus lever up or down to adjust the image sharpness.
4
Replace the focus lever cover.
5
Press the power button on the projector or remote control. The status
3
light flashes blue and then stays on.
Note: To shut down the projector, press the power button on the
projector or the remote control.
Follow the on-screen instructions to pair the remote control and projector,
4
select your language, connect to your wireless network, and sign in to
your Google Account. You only need to pair the remote the first time you
use it.
To correct the image shape, make sure the remote is paired with the
6
projector and then press the corner adjustment button. Follow
the on-screen instructions.
Note: For more detailed adjustment methods, see the online User’s Guide.
Using the remote control
Microphone/indicator
Turn projector
on or off
Display Android TV
application list
Navigate menus
Choose input source
Use voice commands
with Google Assistant
Access Android TV menus
Enter a selection
Display Google TV app
Install your screen
If you purchased an Epson® SilverFlex® 100-inch (ELPSC35) or 120-inch (ELPSC36)
screen, see your screen documentation for installation instructions. Otherwise,
see “Adjust the image.”
Adjust the image
To adjust the image position, move the projector while keeping it level
1
and parallel to the screen.
To adjust a tilted image when the projector is set on a flat surface, adjust
2
the front feet so both sides are level.
Go back to previous
function
Adjust brightness
Turn off video temporarily
Adjust image shape
Note: You must first pair the remote control to the projector to use
Android TV and video-on-demand features. See the online User’s Guide
for more information.
Display Android TV
home screen
Turn volume up or down
Access projector menus
Turn off audio temporarily
Adjust projected image
size and position
Page 3
Troubleshooting
If you see a blank screen, check the following:
•
Press the blank button on the remote control to see if the
•
image was turned off.
Make sure your computer or video device is properly connected.
•
Make sure the status light on the projector is blue and not flashing.
•
Press the power button on the projector or remote control to
•
wake the projector from standby or sleep mode, if necessary.
If you see a blank screen when a computer is connected, check the
•
following:
On Windows®, hold down the Windows key and press P at the
•
same time, then click Duplicate.
If you are using a Mac laptop with macOS 13, select System
•
Settings > Displays. Press the + pop-up menu button, then
choose a display to mirror.
If you are using a Mac laptop with macOS 12, select System
Preferences > Displays > Display Settings. Select the projector,
then choose the mirror option for your display from the drop-down
menu.
On macOS 11 and older, open System Preferences and select
Displays. Click the Arrangement tab and select the Mirror
Displays checkbox.
If the projector does not respond to remote control commands, make sure
•
the batteries in the remote control are installed correctly. Replace the
batteries if necessary.
Registration
Register today to get product updates and exclusive offers. You can register
online at http://epson.com/register (U.S.), http://epson.ca/register (Canada),
or http://latin.epson.com/registro (Latin America).
Where to get help
Manual
For more information about using the projector, you can view or download the
online manual from the Epson website, as described below.
Internet support
Visit http://epson.com/support (U.S.), http://epson.ca/support (Canada),
or http://latin.epson.com/support (Latin America) and search for your
product to download software and utilities, view manuals, get FAQs and
troubleshooting advice, or contact Epson.
Telephone support services
To use the Epson® PrivateLine® Support service, call
(800) 637-7661 (U.S. and Canada). This service is available for the
duration of your warranty period. You may also speak with a support
specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 7 a.m. to 4 p.m., Pacific Time, Monday through Friday. Days
and hours of support are subject to change without notice. Toll or long distance
charges may apply.
In Latin America, see the online User’s Guide for technical support information.
Optional accessories
For a list of optional accessories, see the online User’s Guide.
You can purchase screens or other accessories from an Epson authorized
reseller in the U.S. and Canada. To find the nearest reseller, call
800-GO-EPSON (800-463-7766). Or you can purchase online at
http://epsonstore.com (U.S. sales) or http://epsonstore.ca (Canadian sales).
To find the nearest reseller in Latin America, go to http://latin.epson.com.
Page 4
EPSON is a registered trademark and the EPSON logo is a registered logomark of Seiko Epson Corporation.
PrivateLine and SilverFlex are registered trademarks of Epson America, Inc.
Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.
Google is a registered trademark and Android TV, Chromecast, Chromecast built-in, and Google Assistant are
trademarks of Google LLC. Google Assistant is not available in certain languages and countries. Availability of
services varies by country and language.
Microsoft and Windows are trademarks of the Microsoft group of companies.
®
The Bluetooth
such marks by Seiko Epson Corporation is under license. Other trademarks and trade names are those of their
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
respective owners.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2023 Epson America, Inc., 6/23
Printed in XXXXXX
CPD-63486
Loading...