Epson EMP-9300 User Manual

EMP Multi Screen Adjustment

Operation Gu ide

Notations used in this guide

1

CAUTION

TIP

PROCEDURE

[(Name)]

When "unit" or "projector" appears in the text of this guide, it may refer to items which are accessories or optional equipment in
addition to the main pr ojec tor unit itself.

Indicates procedures which may result in damage or injury if sufficient care is not taken.

Indicates additional information and points.

Indicates a page where useful information regarding a topic can be found. Click on the page number to
display that page.

Indicates operating methods and the order of operations.
The procedure indicated should be carried out in the order of the numbers.

Indicates a name of button or menu on screens.
[OK] button, [Connect] tab

Contents

2

Notations used in this guide 1

Before using the software 3

Connecting to a computer..............................................3

Using the "EMP Multi Screen Adjustment" 4

About "Connect" screen .................................................5

About "Adjust" screen.....................................................6

Run "EMP Multi Screen Adjustment" and connect to

computers.......................................................................7

When the projectors and computers are network-connected ..............7

When the projectors and computers are connected via serial/

USB ports............................................................................................8

Adjusting.........................................................................8

Store/Reload the result of adjustments,

Change it back to the default ....................................... 14

Store the result of adjustments..........................................................14

Reload th e st o red result o f ad justments.............................................1 4

Chang e the result of a d j u st ments b ac k to the defaul t......... ...............14

Index 15

Fine-tuning ...................................................................10

Check each colour by displaying the test patterns ............................12

Check and re gister the position of projected images...13

Check the position of each projected image (Flash function)...........13

Enter comments to identify each projector (Comment function)......13

Register the image position to make it easier to select projectors

(Simple Layout function)..................................................................13

Before using the software

Connecting to a computer

There are three methods to connect the projector to computers as follows.

• Network connection

• Serial connection

• USB connection

"User's Guide" "Network Cable Connections"
"Projector Connection Settings"

"User's Guide" "Cable Layouts"

"User's Guide" "Cable Layouts" "USB Connection
Setup"

3

Using the "EMP Multi Screen Adjustment"

When projecting multiple images on large-sized screen by multiple projectors making the images look one image, you may be bothered by the difference of
colours between each projection. In such case, you can make multiple adjustments for the projectors using "EMP Multi Screen Adjustment".
When you do the above adjustments, check the follows in advance.

• "EMP Multi Screen Adjustment" has already installed.

• Projectors has already been connected to computers.

"Read This First" "EPSON Pro je c t o r Software fo r Multi Screen" CD -ROM"

4