Einhell TC-ID 1000 E Instruction manual

TC-ID 1000 E

Impact Drill

Item No.: 4259825

Ident No.: 11035

Bar Code: 4006825587777

The TC-ID 1000 E is a powerful impact drill for the DIY enthusiast to use on many different jobs everywhere in the home and garage. A switch lets you
select between the drilling and impact drilling functions. The sturdy full metal key chuck assures a safe fixation of the tool bit.

Features

Sturdy full metal key chuck­Electronic speed control with speed pre-selection­Functions drilling and hammer drilling­Metal depth stop­Large softgrip area for convenient work­Additional handle with anti-twist lock­Ready to use for a drill stand with a 43 mm shaft-

Technical Data

- Mains supply 230 V | 50 Hz

- Power 1010 W

- Number of gears 1

- Idle speed (gear 1) 0-3000 min^-1

- Impact rate (gear 1) 0-48000 min^-1

- Drill chuck 1.5 - 13 mm

- Drilling capacity in wood 32 mm

- Drilling capacity in metal 13 mm

- Drilling capacity in concrete 16 mm

Logistic Data

- Product weight 2.12 kg

- Gross weight single packaging 3.98 kg

- Dimensions single packaging 315 x 141 x 235 mm

- Pieces per export carton 8 Pieces

- Gross weight export carton 31.84 kg

- Dimensions export carton 675 x 335 x 265 mm

- Container quantity (20"/40"/40"HC) 3456 | 7344 | 9112

Illustrations can contain accessories, which are not included in standard extent of delivery

Illustration similar (in design), production-wise modifications reserved

GS mark belongs to the product itself only, excluded accessory

Generated at: 18.02.2016 11:16

Page 1