EFD MIKROS PEN User Manual

USER’S
GUIDE

USA: 800-556-3484 or [phone]
Europe: 0800 585733 or [phone]
Asia: [phone]
[e-mail] www.efd-inc.com

Step 1.

Rotate grip toward

“unlock” and remove it

from the pen body.

Step 2.

Replace O-ring with new

lubricated O-rings.

Step 3.

Reinstall the grip on

the pen body.

Parts & Maintenance

To Service O-ring Seals

Replacement Parts

Part # Description

5840-B Loading tube, (50) per bag
5866 Piston installation tool
5863 Neoprene sleeve for grip
5864-B Dampening O-ring; Buna-N
5865-B Air seal O-ring; Buna-N (standard)
5865V-B Air seal O-ring; Viton

®

(optional)

Note: O-rings are supplied (10) per bag.

Mikros Fluid Reservoir Tips

Polypropylene 0.25cc fluid reservoirs with either chamfered
or blunt-end, burr-free, passivated stainless steel tips.
Molded silicone-free with UV blocking agent. Packaged with
tip protectors. (25) tips and pistons per box.

Part # Description

5830CH-B Chamfered, 30 gauge, 0.15 mm ID (.006"), lavender
5833CH-B Chamfered, 33 gauge, 0.10 mm ID (.004"), grey
5832-B Blunt-end, 32 gauge, 0.10 mm ID (.004"), yellow

For EFD sales and service in over 30 countries,
contact EFD or go to www.efd-inc.com/contact

USA: 800-556-3484 or [phone]
Europe: 0800 585733 or [phone]
Asia: [phone]
[e-mail] www.efd-inc.com

Viton is a registered trademark of DuPont.
©2006 Nordson Corporation 5800MP-MAN-01 v062606

A NORDSON COMPANY

A NORDSON COMPANY

CAUTION: Fill reservoir no higher than maximum fill level shown.

Loading

Setup

Step 2.

Pick up piston

with installation tool.

Step 1.

To unlock, rotate grip

until white ring appears.

Step 2.

Slide flange of reservoir into

slot of dispensing pen.

Step 4.

Pull firmly on tip protector

to remove.

Step 3.

Rotate grip to lock

reservoir in place.

Step 5.

Insert quick-connect into air

outlet fitting on dispenser.

Turn clockwise to lock.

Step 1.

Fill reservoir using loading

tube supplied. Stop fill at

maximum fill level shown.

Step 3.

Install piston with tool supplied.

Push tool until shoulder stops

against reservoir.

For pen maintenance and replacement parts, see back cover.