EFD DISPENSGUN User Manual
Operating Instructions
R
1
2
The DispensGun® is easy to use and
requires no special techniques.
The amount dispensed is controlled by
the squeeze of the trigger and the size of
the dispensing tip (larger tip, more flow).
When the trigger is released, the plunger
retracts away from the reservoir piston,
and dispensing stops.
Follow this step-by-step guide to begin
using your new DispensGun.
®
®
The unique DispensGun
simplifies applications of
medium to high viscosity fluids.
It is very easy to use and less
fatiguing than other manual
applicators.
This manual is for the express and sole use of EFD DispensGun
purchasers and users, and no portion of this manual may be
reproduced in any form.
The DispensGun® is patented by EFD Inc. Patent #5,022,563.
2
Features
®
• Rugged construction provides years of productive use.
• Designed specifically for use with ULTRA
System™ component technology
to eliminate drooling or dripping of fluids.
• Adjustable trigger fits all hand sizes.
Specifications
Handle and Trigger: Metal castings with black epoxy finish
Drive Rod, Selector Button, Hardware: Stainless steel
Barrel Adapter: High-strength acetal, polymer
Drive Plunger: Aluminum
Weight (gun only): 11 oz (311 gm)
Safety
Tests demonstrate the DispensGun® is fail-safe. With energetic use of the
®
trigger (in excess of 200 psi) and a clogged or sealed tip, the barrel ears may
break. If this occurs, the barrel merely falls off, with no sudden or dangerous
expulsion of either the barrel or fluid.
Filling Dispensing Barrels
➀ Fill barrel, leaving required empty space
as shown on fill level chart on the left.
Fill level
➀
WARNING: If a dispensing tip becomes clogged, do
not attempt to clear it by forcing the trigger. This may
damage the DispensGun
➁
®
. Replace the clogged tip.
➂
Barrel Fill Level
3cc ½"
5cc ¾"
10cc ¾"
30cc ¾"
55cc ¾"
➁ Insert piston. A piston must always be
used when operating the DispensGun
➂ Twist on orange tip cap and install
orange end cap to provide airtight
storage seal.
You may be using prepackaged barrels
supplied by your distributor. EFD packages
several fluids, including solder mask, thermal heat sink compound, solder paste and
grease. Call 800-556-3484 for more information on these packaged fluids.
®
.
3
Loading...