Dual XDVD8183N User Manual

XDVD8183N

INSTALLATION/OWNER’S MANUAL

DVD Multimedia Receiver with 7” Touch Screen Display

Safety Notes:

The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and or other countries.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Dual is under license.

All other trademarks are property of their respective owners.

XDVD8183N PREPARATION

Table of Contents

DVD Region Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preparation/Mounting/Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Remote Control Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Control Locations - Monitor Closed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Control Locations - Monitor Open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Control Locations - Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

General Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Anti-theft Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Screen Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AM/FM Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MP3/WMA Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Media Compatibility Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Bluetooth Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Page

5-7

9-10

11-12

13-14

15-20

21-22

25-28

29-32

34-42

43-49

50-54

55-58

59-60

61-64

66-67

DVD Region Management

Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD8183N plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. This player has been designed to play back DVD software that has been encoded for specific region areas. It cannot play back DVD software encoded for other region areas than the region areas for which it has been designed.

The XDVD8183N will play discs labeled “Region 1” or “All”.

DVD region codes:

1 - USA, Canada 2 - Japan, Europe, South Africa, Middle East 3 - Rep. of Korea, Taiwan, Hong Kong, Parts of Southeast Asia 4 - Australia, New Zealand, Mexico, South America 5 - Eastern Europe, Russia, India, Africa 6 - China

XDVD8183N PREPARATION

WARNING

Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle

must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.

Several states prohibit the installation of monitors/DVD players if the screen is visible from

the driver’s seat. If you reside in a jurisdiction which has enacted such a law, this unit must not be installed so that the screen is visible from the driver’s seat. When installing this unit in the front console/dashboard, the unit must be positioned so that it is facing the front passenger seat only. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.

This unit is designed so that it may be operated only when the vehicle is in “Park” and the

parking brake is fully engaged. To this end, this unit includes a parking brake lock-out feature which prohibits the unit from operating if the vehicle is not in “Park” and/or the parking brake is not fully engaged. When installing this unit, the installer must connect the parking brake detect wire (“Yellow-Blue Lead”) to the parking brake mechanism in order to make the parking brake lock-out feature operable. DO NOT simply ground the parking brake detect wire to a metal portion of the vehicle. Failure to properly install the parking brake lock-out feature could lead to driver distraction which could result in serious injury or death to the driver’s occupants or persons outside the vehicle and/or property damage.

Once the parking brake lock-out feature is installed, the owner/user must not attempt to

disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking brake and/or (b) purchasing/using any device or unit designed to send necessary brake signals to the unit. Failure to follow these instructions could lead to driver distraction which could result in serious injury or death to the driver’s occupants or persons outside the vehicle and/or property damage.

When operating this unit, keep the unit’s volume level low enough so that the vehicle’s

occupants can hear traffic-related sounds such as police and emergency vehicles. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.

XDVD8183N OPERATION

Safety Information

Please read all instructions carefully before attempting to install or operate.

Due to its technical nature, it is highly recommended that your DUAL XDVD8183N is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.

Safety Notes:

To prevent damage or injury:

1. Make sure to ground the unit securely to the vehicle chassis ground.

2. Do not remove the top or bottom covers of the unit.

3. Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.

4. Do not subject the unit to excessive shock.

5. When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause the unit to malfunction.

6. To prevent short circuits when replacing a fuse, disconnect the wiring harness first.

7. Use only the provided hardware and wire harness.

8. You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake.

9. If you experience problems during installation, consult your nearest DUAL dealer.

10. If the unit malfunctions, reset the unit as described on page 12 first. If the problem still persists, consult your nearest DUAL dealer or call tech assistance @ 1-866-382-5476.

11. To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.

12. When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than usual. Normal brightness will return after using the monitor for a while.

Additional Notes:

1. When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables

with an area of 0.75mm (AWG 18) or more to prevent voltage drops.

2. Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous

to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately.

This device complies with part 15 of the FCC rules and regulations. Operation is subject to the following two conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received, including interference that may cause undesired operation.

XDVD8183N INSTALLATION

Preparation

Please read entire manual before installation.

Before You Start

•Disconnectnegativebatteryterminal.Consultaqualifiedtechnicianforinstructions.

•Avoidinstallingtheunitwhereitwouldbesubjecttohightemperatures,suchasfromdirectsunlight,orwhereit

would be subject to dust, dirt or excessive vibration.

Getting Started

•Slidetheunitoutofthemountingsleeve.

•Installmountingsleeveintoopening,bendingtabstosecure.

•Connectwiringharnessandantennaasshownonpages6-7.Consultaqualifiedtechnicianifyouareunsure.

•Certainvehiclesmayrequireaninstallationkitand/orwiringharnessadapter(soldseparately).

•Testforcorrectoperationandslideunitintomountingsleeve.

•Attachunittomountingsleeveusingsupplied#1Phillipsscrews.

•Snaptrimringintoplace.

•Mounttheiplug™adaptertoanysmoothcleansurfaceusingthesupplieddouble-sidedtapeorPhillipshead

screws.

Mounting sleeve opening dimensions 7-3/16” x 2-1/16” (183 mm x 53 mm)

TYPICAL FRONT-LOAD DIN MOUNTING METHOD

XDVD8183N INSTALLATION

Expanded Wiring Diagram - Inputs/Outputs

Wiring Notes:

Subwoofer output

The SUBWOOFER audio output (Blue RCA) is active in all audio modes and must be connected to an external amplifier.

Center output

The CENTER audio output (Gray RCA) is only active in DVD 5.1 audio mode and must be connected to an external amplifier.

Rear view camera

A rear view camera (not included) can be used with the CAMERA input.

NEED HELP??

Call our Technical Service Hotline, 1-866-382-5476.

Safety Notes:

XDVD8183N INSTALLATION

Wiring Diagram - Optional A/V Connections

XDVD8183N OPERATION

IR Remote Preparation

To first use the IR Remote control,

you must first pull the battery

insulation tape out

Insert or replacing the Battery:

Remove the battery holder

Remove the battery from the battery

holder

Notes:

•

Remove the battery if the remote will not be used for a month or longer

•

Remove and dispose of battery properly

Install the new battery

Make sure to keep the (+) side up

Insert the battery holder

CAUTION!!!

•

Do not store battery with metallic objects or materials

XDVD8183N OPERATION

Control Locations - Monitor Closed

15 7

14 13 12 11 10 9 816

4 5

Band

Auto Store/Preset Scan

Secondary LCD

Display

Open/Close Monitor

Eject

Rotary Encoder/Enter

Mode

Chapter/Track Up/Seek Up

Monitor Notes:

This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will • not obstruct the dash, shifter or any other controls.

• ANGLE / or OPEN

Upon installation, do not attempt to move the monitor up/down by hand. Use the buttons on the front panel only.

•

The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the obstacle and press OPEN again to resume the monitor open/close sequence.

Chapter/Track Down/Seek Down

Stop

Play/Pause

Fast Forward/Manual Tune Up

Fast Reverse/Manual Tune Down

Mute

Power/Volume

Microphone

XDVD8183N OPERATION

Control Functions - Monitor Closed

BAND

AS/PS

(Auto Store /Preset Scan)

SECONDARY LCD

DISP

OPEN

EJECT

ROTARY

MODE

TRACK/SEEK UP

Press BAND to increment from FM1, FM2, FM3, AM ] FM1.

Press AS/PS momentarily to start station PRESET SCAN function, Press AS/PS for 2 seconds to start AUTO STORE station preset function in current BAND.

Additional LCD for system information while monitor is closed.

Press the DISP button to display various information on the secondary LCD.

Press OPEN to open or close the monitor. The unit will emit a confirmation beep when opening and closing. Be careful not to touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur.

Press once to eject disc.

Rotate clockwise/counter-clockwise to select desired item and press once to ENTER.

Press once to incrementally select desired source.

Selects the next chapter/track/radio station.

TRACK/SEEK DOWN

STOP

PLAY/PAUSE

FAST FORWARD/TUNE UP

FAST REVERSE/TUNE DOWN

MUTE

POWER ON/OFF

VOLUME

Selects the previous chapter/track/radio station.

Stop playback of DVD/CD/MP3.

Press once for PAUSE, press again for PLAY.

Fast forwards the chapter/track or selects the next radio frequency.

Fast reverses the chapter/track or selects the previous frequency.

Press once to MUTE audio, MUTE will appear in the secondary LCD. Press again to return audio.

Press POWER momentarily to turn the unit on. Press and hold POWER for more than 2 seconds to turn the unit off. Note: EJECT will still function even if POWER is off.

Rotate clockwise/counter clockwise for desired VOLUME level.

XDVD8183N OPERATION

Control Locations - Monitor Open

Disc-in indicator - Red = Disc inserted, Blue = No disc.

ANGLE  - Press to decrease the monitor view angle.

ANGLE  - Press to increase the monitor view angle.

INFO - Press to select DVD INFO and press and hold for BRIGHTNESS.

Press to RESET system.

Safety Notes:

2 3

XDVD8183N OPERATION

Control Functions - Monitor Open

Disc-in indicator

Monitor Angle 

INFO/PIC

Blue = No disc Red = Disc inserted

Press ANGLE  to increase the monitor view angle.

Press ANGLE  to decrease the monitor view angle.

Notes:

•Donotattempttomovethemonitorup/downbyhand-severedamagewill

occur. Use the front panel buttons or the remote control only.

•ThecoloroftheLCDmonitorvariesbetweenviewingangles.Selecttheangle

with the most optimum view for your location.

•Thelastpositionofthemonitorwillbesavedinmemory.Themonitorwill

return to its last position automatically the next time it is opened.

Press INFO button for 1 second to display DVD disc information.

SYSTEM RESET

Press and hold INFO for 2 seconds to change TFT LCD BRIGHTNESS: Press ANGLE  to increase, ANGLE  to decrease or use VOLUME rotary to adjust the level up or down, (0 minimum/20 maximum), 10 is default.

If you experience abnormal operation or, your unit is inoperable, press the RESET button for 3 seconds, located on the front bottom-right corner of the unit. After a system reset, the unit restores all factory default settings. Note: Use the tip of a pen to access the button.

XDVD8183N OPERATION

Control Locations - Remote

5 8

Mode

Mute

Open/Close

Power

Key#1

Key#2

Key#3

Volume Up

Key#4

Key#5

Key#6

Volume Down

Key#7

Key#8

Key#9

109

37 38

Info

Key#0

Band/Stop

Audio Select

Escape

4-Way - Up

Picture

4-Way - Left

4-Way - Right

Repeat A-B

Title Menu/CD Scan

4-Way - Down

3129

Root

Repeat

Chapter/Track/Seek Down

Fast Reverse/Manual Tune Down

Fast Forward/Manual Tune Up

Zoom

Audio

Angle

Sub-Title

* The remote control uses one 3 volt Lithium CR2025 battery. For best performance, replace only with CR2025 or equivalent.

XDVD8183N OPERATION

Control Functions - Remote

Mode

Mute

Open/Close

Power

Keys 0-9

Volume Up

Volume Down

Info

Band / Stop

Audio Select

Escape

4-Way -Up/Down/Left/Right

Picture

Press once to incrementally select desired source.

Press once to MUTE audio, press again to return audio.

Press once to open monitor, press again to close the monitor.

Press once to turn the unit on, press again to turn unit off.

Direct access chapter/track/preset station for current BAND.

Increase VOLUME.

Decrease VOLUME.

Displays DVD information.

Search function in the DVD/CD disc mode.

Press to increment BAND, or STOP while in DVD/MP3 mode.

Enter AUDIO Setup mode.

Exit current menu.

Navigating system and DVD menus.

Enter the MAIN system menu.

BRIGHTNESS parameter setting for TFT.

Repeat A-B

Title Menu

Root

Repeat

Chapter/Track Down

Chapter/Track Up

Fast Rewind

Fast Forward

Zoom

Audio

Angle

Sub-Title

Starts/pauses playback or confirm settings.

Repeat playback from time frame A to time frame B.

Enters the title menu on DVD.

Enters the main menu of the DVD disc.

Repeats playback of current DVD chapter.

Selects the previous chapter/track for playback.

Selects the next chapter/track for playback.

Fast rewinds the disc content.

Fast forwards the disc content.

Zooming in/out on an image from DVD disc.

Change the audio language for DVD disc playback.

Plays DVD disc in different angle for a scene.

Language selection for subtitle.

XDVD8183N OPERATION

General Operation

Power On/Off

Monitor Open/Close

Monitor Angle Position

Press POWER momentarily to turn the unit on. Press and hold POWER for more than 2 seconds to turn the unit off. Note: EJECT will still function even if POWER is off.

Press OPEN to open or close the monitor. The unit will emit a confirmation beep when opening and closing. Be careful not to touch the monitor during the open/close sequence.

Notes:

•Theunitwillstopautomaticallyduringopen/closeifanobstacleisdetected.

If this occurs, remove the obstacle and press OPEN again to resume the monitor open/close sequence.

•Audiocanbeheardwhilethemonitorisclosed.

Press ANGLE  to increase the monitor view angle. Press ANGLE  to decrease the monitor view angle.

Notes:

•Donotattempttomovethemonitorup/downbyhand-severedamagewill

occur. Use the front panel buttons or the remote control only.

•ThecoloroftheLCDmonitorvariesbetweenviewingangles.Selectthe

angle with the most optimum view for your location.

•Thelastpositionofthemonitorcanbesavedinmemory.Themonitorwill

return to its last position automatically the next time it is opened.

Notes:

•Thevehiclemustbeinparkandtheparkingbrakeappliedtoviewvideoon

the in-dash monitor.

•Asasafetyfeature,ablue“CAUTION” screen will show on the display when

the vehicle's parking brake is not engaged. DVD and AUX IN audio can be heard while the vehicle is in motion.

•Thevideodisplayofthein-dashunitwillnotoperatewhilethevehicleis

moving. This is a safety feature to prevent driver distraction. In-dash video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. Refer to local laws in your area.

See DVD operation on page 33 for more details on how to initialize the

PARKING BRAKE.

XDVD8183N OPERATION

ltem

Adj ustable Range

MasterVolume

Front Left ChannelVolume

Rear RightChannel Volume

Center ChannelVolume

SubwooferVolume

00 to 40

-10to+10

Front R ightChannel Volume

-10to+10

Rear Left ChannelVolume

-10to+10

General Operation

Mode

Optional Mode Selection

Volume

Mute

Audio Adjustment

from front panel

Press MODE to select between TUNER, DVD, AUX IN and CAMERA inputs. Modes of operation are indicated in the OSD (On Screen Display) and secondary LCD.

With the monitor open, press the screen to display the OSD menu bar and press TUNER, DVD, AUX IN or CAMERA in the MAIN menu page to select the desired source.

Adjust VOLUME using rotary encoder or the VOL   buttons (00-40).

Press MUTE to silence the audio;

will appear in the OSD.

Press MUTE again to cancel.

Press in VOLUME rotary knob on left front panel, Press in VOLUME again to advance to desired parameter to be changed, Turn VOLUME rotary Q or P to adjust to desired level, Press in VOLUME to advance to next selection, Press and hold the VOLUME button on the front panel to exit.

2-Channel Audio Settings

6-Channel Audio Settings

Audio Adjustment

from Remote

Note: 6-Channel audio is only adjustable when "Full 6CH" mode is selected. Refer to page 47 for more details.

Press the SEL button,

Press the   buttons on the remote to select an item to be adjusted, Press  or  to adjust the desired setting, Press the ESC button on the remote control to exit the audio control menu.

Notes: The Bass and Treble levels are only adjustable when EQ is set to "User” mode. The Loud function compensates for deficiencies in sound ranges at low levels. When the Loud function is on, LOUD is displayed on the screen.

XDVD8183N OPERATION

General Operation

INFO/PIC

RGB BRIGHTNESS

CVBS Screen Controls

SHARPNESS

CONTRAST

COLOR

BRIGHTNESS

TINT

Note: Adjustments to SHARPNESS, CONTRAST, COLOR, BRIGHTNESS & TINT are only possible while in either AUX-IN or CAMERA CVBS mode.

Press INFO button for 1 second to display DVD disc information.

Press and hold INFO for 2 seconds to change TFT LCD BRIGHTNESS: Press ANGLE  to increase, ANGLE  to decrease, or use VOLUME rotary to adjust the level up or down. (0 minimum/20 maximum) 10 is default.

While in AUX-IN or CAMERA mode: Press and hold INFO for 2 seconds to access PICTURE MENU, press INFO briefly again to step to next selection:

PICTURE MENU

SHARPNESS 10 COLOR 10 CONTRAST 10 BRIGHTNESS 10 TINT 10

Press  or  to adjust the sharpness (0 minimum/+20 maximum).

Press  or  to adjust the contrast (0 minimum/+20 maximum).

Press  or  to adjust the color (0 minimum/+20 maximum).

Press  or  to adjust the brightness (0 minimum/+20 maximum).

Press  or  to adjust the tint (0 minimum/+20 maximum).

XDVD8183N OPERATION

General Operation

BAND

AS/PS

(Auto Store /Preset Scan)

DISP

OPEN

EJECT

ROTARY

MODE

Press BAND to increment from FM1, FM2, FM3, AM ] FM1.

Press AS/PS momentarily to start station PRESET SCAN function. The unit will now scan your program presets for 10 seconds for each preset in that band. Press AS/PS again to stop scanning. Press AS/PS for 2 seconds to start AUTO STORE station preset function in current BAND.

Press the DISP button to display various information on the secondary LCD screen when the monitor is closed.

Press OPEN to open or close the monitor. The unit will emit a confirmation beep when opening and closing. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur.

Press once for DISC ejection.

Press to access MAIN menu, rotate clockwise/counter-clockwise to select desired item and press once to ENTER.

Press once to incrementally select desired source.

TRACK/SEEK UP

TRACK/SEEK DOWN

STOP

PLAY/PAUSE

FAST FORWARD/TUNE UP

FAST REVERSE/TUNE DOWN

MUTE

POWER ON/OFF

VOLUME

PROGRAMMABLE TURN-ON

VOLUME

Selects the next chapter/track/radio station.

Selects the previous chapter/track/radio station.

Stop playback of DVD/CD/MP3.

Press once for PAUSE, press again for PLAY.

Fast forwards the chapter/track or selects the next radio frequency.

Fast reverses the chapter/track or selects the previous frequency.

Press once to MUTE audio, press again to return audio, an icon indicator will flash on the TFT monitor.

Press POWER momentarily to turn the unit on. Press and hold POWER for more than 2 seconds to turn the unit off. Note: EJECT will still function even if POWER is off.

Rotate VOLUME rotary knob Q or P for desired VOLUME level, press once to access the AUDIO SETUP MENU.

Turn VOLUME rotary to desired listening level, press and hold VOLUME rotary knob for 3 seconds to program currently selected volume level.

XDVD8183N OPERATION

General Operation

Secondary LCD Information

1) LOC

2) ST

3) TIME

4) LOUD

2 3

NOTE: Secondary LCD only functions when TFT monitor is closed.

LOCAL indicator, icon will be off when DISTANCE (DX) is selected

STEREO radio station indicator

Displays TRACK time, TUNING frequency, MP3 ID3 info, & CLOCK, etc

LOUDNESS selection indicator

XDVD8183N OPERATION

General Operation

Main Menu Access

Touch Access Buttons

10)

11)

There are three methods to access the MAIN menu:

•

Press the ENTER button on the right ROTARY knob. Press the MENU button on the remote control.• Touch the upper left corner of the touch screen.•

Touch to access AM/FM TUNER mode. Touch to access CD/DVD mode, CD/DVD must be inserted. Touch to RETURN to previous screen. Touch to access BLUETOOTH mode, (BLUETOOTH must be activated first.) Refer to page 61 for more details. Touch to access CAMERA mode, if optional camera isn't connected then "No Signal Detected" will be displayed. Touch to STANDBY screen, touch screen again or any button to resume display. Note: VOLUME level can be controlled in STANDBY mode. Touch to access AUXILIARY A/V INPUT mode . Touch to access SCREEN SETUP menu. Touch to access GENERAL SETUP menu. Touch to access CD/DVD SETUP menu, CD/DVD must be inserted to function Touch to access MAIN Source menu.

7 6 5

Rapid Dial Rotary Encoder

The rotary encoder can also control touch screen functions from the main menu.

•

Select desired function rotating clockwise or counter-clockwise. Function will be outlined in yellow.• Press to confirm/ENTER.•

XDVD8183N OPERATION

GENERAL Setup - Menu

General Setup Menu

Press the GENERAL button to access the GENERAL setup mode.• Select desired parameter you wish to change.• Page will return back to previous screen after 10 seconds of inactivity or •

Note:

Default anti-theft

password is 0000

by pressing the RETURN button.

GENERAL Setup Menu matrix

Settings Default Options Function

USA

Radio USA

Clock adjust AM 00:00 See adjusting the clock on page 23 for more details

Clock Mode 12Hr 12Hr PM 6:00

Camera Image Normal Normal Normal Image

Video Format Auto

TFT Auto Open Off

Bluetooth Off Off Turns off the Bluetooth functionality

Anti-theft Code 0000 ---- Must enter password to turn anti-theft on or off

Anti-theft active Off On System will require a password if main battery power is removed for

Load Factory defaults

Yes Are you sure?

S-Amer1

S-Amer2

Europe

24Hr 18:00

Reverse Mirror camera input image 180 degrees

Auto System will auto detect NTSC or PAL

NTSC For NTSC compatibility

PAL For PAL compatibility

On TFT panel will automatically open when IGN is turned on

Off TFT panel will not auto open when IGN is turned on

Manual TFT will only open/close when OPEN button is pressed

On Enables Bluetooth functionality

Off No password will be required if power is removed

Yes/Cancel

Set to appropriate setting for your country

more than 40 seconds

Load all factory parameters to their original settlings, Notes: This will not reset the anti-theft password. Default anti-theft password is 0000.

Note: Not all GENERAL setup features are described in detail.

+ 50 hidden pages