Druck 9000 Data sheet

9000 SERIES

HYDRAULIC DEAD WEIGHT TESTERS — PRIMARY PRESSURE STANDARDS TO 60,000 PSI

The 9000 Series Hydraulic Deadweight Testers cover a complete pressure range up to 60,000 psi, offering a high-quality, cost-effective

precision calibration source for almost any application. The 9000 Series is available in single piston or dual piston models for expanded

range capabilities with either manual or motorized operation.

Included with your purchase of a Series 9000 Dead Weight Tester is a certificate traceable to NIST. Certificates traceable to NIST standards

can be supplied at accuracies of 0.015% or 0.025% of reading.

• Precision Pressure Calibration

• Stainless Steel, Non-Magnetic Weights

• Single-Piston or Dual-Piston Models

• Corrections for Local Gravity

• Manual or Motorized Units

• Relief Valve to Protect Against Over-Pressure

PRESSCAL — GET THE BEST ACCURACY FROM YOUR DEAD WEIGHT TESTER!

PressCal will allow users to apply all necessary corrections including, gravity, temperature, pressure head, buoyancy, etc. to enhance the

pressure measurement accuracy of your Deadweight Tester.

• Menu-Driven, Easy-to-Use Software

• Fluid Media Details

• Pressure Equivalent Calculations with All Corrections

Information subject to change without notice. Prices in USD. 012306

• Local and Standard Gravity Adjustments

• Pre-Loaded Calibration Data

• Automatic Production of Calibration Certificates

9000 SERIES, CONTINUED

SPECIFICATIONS

RANGE 10 to 500 up to 60,000 psi

ACCURACY ±0.025% or 0.015% of reading

TRACEABILITY NIST

WEIGHTS Stainless steel, non-magnetic

PRIMING Direct via ram screw

STANDARD CORRECTIONS GRAVITY TEMPERATURE AIR DENSITY

9.80665 m/s

20°C 1.2kg/m

WEIGHT TESTER MASS SET

9000 40 lbs 77-220 lbs (dependent on pressure range)

9190 66 lbs 187.4 to 308.6 lbs

DIMENSIONS 18.25” x 13.5” x 19” maximum

ORDERING INFORMATION

Included in standard delivery: NIST Traceable Certificate of Accuracy, Operating Manual, Set of Stainless Steel Weights in 3 Aluminum Carrying Cases, Set of Stainless Steel Union Nuts: 3/4 BSP, 1/2 BSP and 3/8 BSP, Standard and Coned Lens Rings, 9/16” x 18 UNF Female High Pressure Adapter, Dust Cover, Spirit Level, 1 Liter Operating Fluid

ACCURACY

MODEL RANGE* 0.025% 0.015%

9120-4 Single piston 10 to 500 psi $ 4,510 $ 4,750

9130-4 Single piston 20 to 1000 psi 4,515 4,755

9150-4 Single piston 100 to 5000 psi 4,585 4,825

9170-4 Single piston 200 to 10000 psi 5,160 5,435

9180-4 Single piston 200 to 16000 psi 8,225 8,660

9190-4 Single piston 500 to 30000 psi 24,085 25,355

9190-HA-4 Single piston 500 to 60000 psi 29,025 30,555

M9120-4 Single piston motorized 10 to 500 psi 5,530 5,770

M9130-4 Single piston motorized 20 to 1000 psi 5,530 5,770

M9150-4 Single piston motorized 100 to 5000 psi 5,605 5,845

M9170-4 Single piston motorized 200 to 10000 psi 6,180 6,455

M9180-4 Single piston motorized 200 to 16000 psi 9,245 9,680

M9190-4 Single piston motorized 500 to 30000 psi 25,105 26,375

M9190-HA-4 Single piston motorized 500 to 60000 psi 30,045 31,575

9230-4 Dual piston 10 to 5000 psi 5,780 6,090

9250-4 Dual piston 10 to 10000 psi 6,720 7,070

9260-4 Dual piston 10 to 16000 psi 9,255 9,740

M9230-4 Dual piston motorized 10 to 5000 psi 6,800 7,110

M9250-4 Dual piston motorized 10 to 10000 psi 7,740 8,090

M9260-4 Dual piston motorized 10 to 16000 psi 10,275 11,365

421-207-41 Fractional weight set Units: psi 310 330

CWS9000-4 Conversion weight set Units: psi 2,380 2,505

CWS9001-4 Conversion weight set, 1100 Bar Units: psi 2,380 2,505

PRESSCAL Calibration software, when ordered with dead weight tester 600 600

Ranges also available in kg/cm2 and bar.

Information subject to change without notice. Prices in USD. 012306