Druck 2000 Data sheet
2000 Series Hydraulic
Deadweight Testers
OIL AND WATER OPERATED UNITS AVAILABLE
Specification
Range: 1 to 700 bar / 10 to 10,000 psi or
Standard accuracy: 0.025% of reading.
Traceability: NPL, NIST
Weights: Stainless steel, non magnetic.
Priming: Direct via ram screw.
Standard corrections:
Gravity: 9.80665 m/s² *
Temperature: 20°C *
Air density: 1.2 kg/m³
Weight: Tester 9.5 kg
Weights 30 kg
Dimensions: L360 x W290 x H190 mm approx.
Operating Fluids: Oil Models - Mineral oils to ‘SI’
specifications.
Water Models - Distilled water.
Standard accessories
All testers are supplied with:
Certificate of Calibration of deadweight tester.
Operating manual.
Set of stainless steel weights.
1/4"BSP 'Quick-fit' swivel adaptor to take item
under test
Spirit Level.
Operating fluid.
Optional accessories
Full set of adaptors consisting of 1/8“, 1/4”, 3/8”, 1/2” BSP
female.
Right angled adaptor to take above.
(Set of NPT adaptors available on request - Part No DW6127)
Dust cover.
Wooden carrying case (weights).
Conversion Weight Sets to convert from one unit of pressure
to another.
Incremental Weight Sets for smaller increments of pressure
PressCal Software
UKAS Certification
ORDERING CODES For Water units add suffix 'W' to code e.g. 2150-6-W
PRESSURE RANGE
ORDER
CODE No.
2120
2130
Water
Unit
•
-4
psi
10-500
20-1000
Weights
per set
12
12
-5
kgf/cm²
1-35
2-75
Weights
per set
13
14
-6
bar
1-35
2-75
Weights
per set
13
14
2150
2170
Other units available upon request. * All models can be supplied corrected for gravity and/or temperature - please specify when ordering
Tel: 0121 784 6855 (UK) Tel: +44 121 784 6855 (Int)
Fax:0121 784 4795 (UK) Fax: +44 121 784 4795 (Int)
•
•
50-5000
100-10000
12
12
5-350
10-700
13
13
5-350
10-700
13
13
Loading...