Druck 1800 User Manual

Measurement & Control

Depth/Level

Druck Submersible Pressure Sensors Product Guide

Features

• High accuracy

• Excellent reliability

• Robust construction

• Harsh media compatible

• High stability

• Low power/pulsed power operation

Applications

• Bore hole monitoring

• River level

• Tank level

• Tide and wave height

• Pump control

• Sand lter dierential

• Marine

Ground and Surface Water

One of the most ecient methods of measuring water level in wells, streams, rivers, canals and

reservoirs is the submersible pressure sensor. It uses

very little energy and provides an accurate long term measuring system solution.

There are many thousands of submersible GE pressure sensors installed worldwide in a variety of applications where the high stability and reliability of the devices have clearly delivered the lowest “costof-ownership” of any method available.

PDCR/PTX 1830

High specication, robust submersible pressure

sensor

• Ranges from 0.75 to 600 mH2O (1 to 900 psi)

• Millivolt or milliamp output

• Accuracy to ±0.06% FS

• Body diameter 17.5 mm ( 0.69 in)

• All-welded titanium construction

• Vented polyurethane cable with Kevlar® anti-stretch construction

• Hazardous area approvals

• Lightning protection

• Five-year anti-corrosion warranty

PTX 1730

Submersible pressure sensor

• Ranges from 3.5 to 600 mH2O (5 to 900 psi)

• Milliamp output

• Accuracy ±0.25%

• Body diameter 17.5 mm (0.69 in)

• All welded 316L stainless steel construction

• Vented polyurethane cable with Kevlar anti-stretch construction

UNIK 5000

Low cost submersible pressure sensor

• Range 0.7 to 200 mH2O (1 to 300 psi)

• Voltage, milliamp, millivolt output

• Accuracy to ±0.04%

• Body diameter 25 mm ( 1 in)

• All-welded 316L stainless steel with Hastelloy® C276 diaphragm

• Vented polyurethane cable with Kevlar® anti-stretch construction

• Supply current <3 mA (at no load)

• Gauge, absolute, dierential versions

UNIK 5000 Dierential

Submersible dierential pressure transmitter

• Ranges from 1 to 350 mH2O (1.5 to 500 psi)

• Voltage, milliamp, millivolt output

• Accuracy ±0.04% FS

• All-welded 316L stainless steel with Hastelloy C276 diaphragm

• Moulded polyurethane cable

Wastewater and Remediation

One of the most dicult applications in level measurement is sewage. Most methods suer from clogging, high-humidity interface from foaming or require line of sight.

GE has developed the PTX1290 with its ush elastometric diaphragm and titanium body in order to provide an inexpensive way to ensure highly reliable level

measurement in this harsh environment.

In groundwater remediation applications, undocumented chemicals may be encountered that could cause corrosion in stainless steel devices. All-welded titanium construction and robust Hytrel® cable is insurance against premature failure.

PTX 1290 (US Only)

Wastewater submersible pressure transmitter/ transducer

• Ranges from 1.75 to 15 mH2O (2.5 to 22.5 psi)

• Current output

• Accuracy ±0.25% FS

• Body diameter 30 mm (1.2 in)

• All-welded titanium construction

• Polytetrauoroethylene-coated elastometric ush diaphragm

• Hazardous area approvals (US only)

• Five-year anti-corrosion warranty

Reverse osmosis pump discharger and lter

Watershed data logger

PDCR/PTX 1840

High specication robust submersible pressure

sensor

• Ranges from 0.7 to 600 mH2O (1 to 900 psi)

• Millivolt or milliamp output

• Accuracy to ±0.06% FS

• Body diameter 17.5 mm (0.69 in)

• All-welded titanium construction

• Chemically resistant cable with Kevlar® anti-stretch construction

• Hazardous area approvals

• Lightning protection

• Five-year anti-corrosion warranty

Filtration dierentials and pumps

Water distribution

data logger

Storage tower water level

Sewage collection and lift stations pump discharge

+ 5 hidden pages