DORO 501 User Manual

doro 501

English

Connection

Connect the line cord of the telephone to a telephone network
wall socket, lift the handset and check there is a dialling tone.

Wall mounting

The telephone can be wall mounted. Use two screws vertically

mounted 100 mm apart the screws should then t into the two

‘keyholes’ on the back of the telephone. The telephone will mount
directly to an Australian standard wall plate.

Mute button

Press and hold z to disable the handset microphone, release z to
reconnect the microphone.

Redial function

When the number dialled is engaged or if you wish to redial the
last number dialled, lift the handset and press r.

Volume control

The handset earpiece volume may be adjusted using located
on the side of the handset.

Ringer

The ringer volume can be adjusted to high, low or off
– using located on the handset.

Recall Time (Australia and New Zealand only)

The Recall time – 100ms (AU) or 600ms (NZ) - can be adjusted
using the 600R100 switch depending on the country of operation.

Please note, to terminate the call, place the handset on the cradle.