D-Link DBT-320 Install Manual

PersonalAir™ Bluetooth USB

Printer Adapter

DBT-320

This product works with
Bluetooth enabled PC’s with the
following operating systems:
Windows 98SE, Me, 2000, and XP.

Before You Begin

Y ou must have at least the following:

• Bluetooth Enabled PC Supporting HCRP and SPP Bluetooth Profiles
for Printing, Bluetooth Enabled Mobile Phone, or Bluetooth enabled PDA.

• USB Printer* with One Available T ype B USB Port.

(*PCL3 Printer is required for Printing from Cell Phone or PDA)

DBT -320 Bluetooth USB Printer Adapter

Wall Mount Cradle

©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their
respective holders. Software and specifications subject to change without notice. DBT-320. 03052004

Check Your Package Contents

These are the items included with your purchase:

If any of the below items are missing, please contact your reseller.

Using a power supply

with a different voltage
rating will damage this
product and void the warranty .

AC Power Adapter

2

Installing the DBT-320

Plug the DBT-320 Type B
USB connector into the T ype
B USB port located on the
back of your printer.

Using the included power
adapter , connect the yellow
coded plug to the yellow
power connector port on the
DBT-320 and the other end
of the power connector to an
available power strip or
outlet.

The DBT-320 Bluetooth USB Printer Adapter set up is now complete!
You will now be able to enjoy wireless printing from your cell phone, PDA,
laptop, or computer with the DBT -320 Bluetooth USB Printer Adapter .

3

DBT -320 LED Indicators

Power
Indicator

Bluetooth
Link
Indicator

The DBT -320 features two LED indicators, the Ready LED and the BT LED.

• The Ready LED indicator will light solid green when the DBT-320 is
powered on with the external power adapter . When the printer is powered
on, a blinking green Ready LED indicates a successful printer connection.

• The BT Indicator will blink green when a file is being sent to the printer from a
laptop, computer, PDA, or cell phone.

Printing from your Laptop/PC using
the DBT-320

Your Bluetooth enabled laptop or computer will have Bluetooth software
that will enable you to connect to the DBT -320 printer adapter. The instructions
on the following page are based on a D-Link DBT -120 USB Bluetooth adapter

used with a PC running Windows XP with Widcomm Bluetooth Software
v1.4.2.10. Depending on the Bluetooth setup on your system, the installation
procedure may vary slightly .