Specifications and Main Features
- Type: We have a Stereo Cassette Deck.
- Model: The model number is DENON DRM-710.
- Drive: Computer controlled silent drive.
- Tape Transport: Double capstan system.
- Motor Drive: Slip free spool drive for tape tension stability.
- Power Supply: Dual power supply.
- Head Configuration: A combination of three heads for record and replay.
- Noise Reduction: Dolby HX PRO and also Dolby C noise reduction system.
- Manual Bias Adjustment: To be determined.
- Counter: Linear counting feature with four digit display which is combined with “Memory Stop feature”.
- Recording: There is an automatic tape type selector./1- Please over defer the question: Recording: There is an automatic tape type selector.
- Remote Control: It is sold separately.
- Dimensions: Dimensions are as follows, 434 mm (Width) x 124 mm (Height) x 275 mm (length)
- Weight: This piece weighs in at 4.2 kg.
- Frequency Response: Frequency response is adjustable between 20 Hz and 20 kHz ±3 dB (Metal tape) used.
- Signal-to-Noise Ratio: Greater than 75 dB (with Dolby C).
- Channel Separation: Greater than 40 dB (1 kHz nominal).
- Wow and Flutter: Not more than 0.038% WRMS (According to Japanese industrial standards).
- Recording Time: Recording time is until approximately 100 seconds using the C-60 cassette.
- Output Level: Approximately 620 mV max (47 kOhm).
- Maximum Input Level: 80 mV (20 dBm) max.
- Tape Size setting: For C-90, C-75, C-60, C-100 tapes.
Frequently Asked Questions
Q: What is the cassette deck's model?
A: Its model is, in fact, DENON DRM-710.
Q: Is Dolby noise reduction possible with the DRM-710?
A: Affirmative, it is compatible with the two systems namely, Dolby HX PRO and Dolby C noise reduction systems.
Q: Multiturn micrometers for biasing are not included in the device, can I do it manually?
A: A manual setting for bias is indeed built into the device.
Q: The cassette deck's weight is?
A: So, now the DENON DRM-710 weighs approximately 4.2 kg.
Q: The cassette deck works only with a certain type of tapes, which ones?
A: You can use Normal, CrO2, and also Metal tapes with the DRM-710, there is an automatic tape type selection function.
Q: How large is the device?
A: Its dimensions are 434 mm (W) x 124 mm (H) x 275 mm (D).
Q: Does the DRM-710 have a remote control?
A: Yes, a remote control system can be purchased separately.
Q: Can you tell me what the device's signal-to-noise ratio is?
A: The ratio of signal power to noise floor is greater than 75 dB for material recorded which only requires Dolby C.
Q: What is the frequency response range for this cassette deck?
A: The frequency response is between 20 Hz and 20 kHz ±3 dB (with a Metal tape).
Q: What is the procedure for adjusting the size of the tape to be recorded on?
A: The mechanism in question incorporates a Tape Size button which permits the user to choose the desired tape length.
User Manual
Loading...