Denon AVC-A1XV Service Bulletin

The Operating Manual for DENON AV Receiver/Amplifier firmware update Page 1 / 1

Confirming the firmware’s number after update:

After completion of the updating operation, the new version number can be confirmed
by starting up the AVR-5805 / AVC-A1XV according to the following procedure.
With the following operation, the AVR-5805 / AVC-A1XV can be set to the Flash-ROM
Version-Number Confirmation Mode.
Turn the power of the AVR-5805 / AVC-A1XV on, while holding both “ROOM EQ” button
and “STATUS” button on the front panel simultaneously.

ROOM EQ

＋

STATUS

＋

Power ON

Turn

Every time the “STATUS” Button is pressed, version numbers of the MAIN, SUB,
etc. are indicated on the front panel section in the following order.

Depression Button Name Remarks
1 STATUS MODEL AVR or AVC
2 STATUS MAIN 01.38
3 STATUS SUB 03.12
4 STATUS DSP1 31.08
5 STATUS DSP2 32.07
6 STATUS DSP3 33.11
7 STATUS ZONE 01.12
8 STATUS Z DSP 18.02
9 STATUS VIDEO 00.87
10 STATUS 1394 IMG I00000EF50051
11 STATUS 1394 BL B0000280B0001
12 STATUS 1394 CNE C 20050211
13 STATUS ETHERNET IMG I00000CD48600
14 STATUS ETHERNET BL B00000CD58600
15 STATUS ETHERNET CNE C 20041027
16 STATUS ETHERNET MAC 0005cd-*****