Danby PREMIERE DPAC12010H User Manual

Loading...

Owner’s Use and Care Guide

Guide d’utilisation et soins de Propriètaire

Model • Modèle

DPAC12010H

CAUTION: Read and

MISE EN GARDE:

follow all safety rules

Veuillez lire

attentivement les

and operating

consignes de sécurité

instructions before

et les directives

first use of this

d’utilisation avant

l’utilisation initiale

product.

de ce produit.

PORTABLE AIR CONDITIONER

Owner’s Use and Care Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 - 10

Welcome

Part Identification

Important Safety Information

Installation

Operation

Care and Maintenance

Troubleshooting

Warranty

CLIMATISEUR PORTATIF

Guide d’utilisation et soin de Propriètaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11 - 20

Bienvenue

Indentification de Partie

Consignes de Sécurité Important

Installation

Fonctionnement

Soins et Entretien

Garantie

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE:

If the unit changes ownership, be sure this manual accompanies the unit.

CONSERVER CES INSTRUCTIONS POUR CONSULTATION ULTÉRIEURE: En cas de revente du l’appareil, ce manuel doit être inclus avec l’appareil.

Danby Products Ltd, Guelph, Ontario Canada N1H 6Z9

Danby Products Inc, Findlay, Ohio USA 45840

V1.12.09 JF

WELCOME

Thank you for choosing a Danby Premiere appliance to provide you and your family with all of the “Home Comfort” requirements of your home, cottage, or office. This Owner’s Use and Care Guide will provide you with valuable information necessary for the proper care and maintenance of your new appliance. If properly maintained, your Danby appliance will give you many years of trouble free operation. Please take a few moments to read the instructions thoroughly and familiarize yourself with all of the operational aspects of this appliance.

Your Danby Portable Air-Conditioner is a multi-functional room air-exchanging, air-processing appliance, designed to offer you the functions of; Air Conditioning, Dehumidifying, and Independent Fan. Each individual mode is featured with “oscillating” air swing capabilities. This unit can be conveniently moved from room to room within your home and set up in just minutes. Imagine the convenience of 4 Season Home Comfort at your fingertips, anywhere, anytime.

For easy reference, may we suggest you attach a copy of your sales slip/receipt to this page, along with the following information, located on the manufacturers nameplate on the rear panel of the unit.

Model Number:

Serial Number:

Date of Purchase:

This information will be necessary if your unit requires servicing and/or for general inquiries. To contact a Customer Service Representative, call Danby TOLL FREE: 1-800-26- (1-800-263-2629)

1

Danby PREMIERE DPAC12010H User Manual

PART IDENTIFICATION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Control Panel

 

 

 

 

 

 

 

 

 

 

 

 

 

Air Intake

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Evaporator)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Air Outlet

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Signal Receptor

 

 

 

 

 

 

 

 

 

 

 

 

Handle

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Air Intake Hose

 

 

 

Air Outlet Hose

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Water Outlet Drain

 

 

 

 

 

 

 

 

 

Castor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power Supply Cord

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IMPORTANT SAFETY INFORMATION

READ ALL SAFETY INFORMATION BEFORE USING

ELECTRICAL

SPECIFICATIONS

1)Check available power supply and resolve any wiring problems BEFORE installation and operation of this unit.

All wiring must comply with local and national electrical codes and be installed by a qualified electrician. If you have any questions regarding the following instructions, contact a qualified electrician.

2)This appliance draws 10.8 nameplate amps under Cooling Mode and may be used in any properly wired, general purpose 15 amp household grounded receptacle.

3)For your safety and protection, this unit is grounded through the power cord plug when plugged into a matching wall outlet. If you are not sure whether the wall outlets in your home are properly grounded, please consult a qualified electrician.

WARNING: Improper connection of the grounding plug can result in risk of Fire, Electric Shock, and/or injury to Persons associated with the appliance. Check with a qualified service representative if in doubt that the appliance is properly grounded.

4)DO NOT USE PLUG ADAPTERS OR EXTENSION CORDS WITH THIS UNIT. If it is necessary to use an extension cord with this unit, use an approved “air conditioner” extension cord only (available at most local hardware stores).

5)To avoid the possibility of personal injury, always disconnect the power supply to the unit before installing and/or servicing.

TABLE 1

Suggested Individual Branch Circuit

Nameplate Amps

*AWG Wire Size

10.8

16

AWGAmerican Wire Gauge

*Based on copper wire at 105°C temperature rating.

TABLE 2

Receptacle and Fuse Types

Rated Volts

125

 

 

Amps

15

 

 

Wall Outlet

 

 

 

 

 

 

 

Fuse Size

15

 

 

 

 

 

 

 

Time Delay Fuse

Plug Type

(or Circuit Breaker)

 

 

 

 

 

CAUTION: Do not leave this unit unattended in a space where people or animals that cannot react to a failed unit are located. A failed unit can cause extreme overheating or death in such an enclosed, unattended space.

2

 

IMPORTANT SAFETY INFORMATION

 

 

 

 

 

 

POWER

The power cord supplied with this air conditioner contains a device that senses damage to

SUPPLY CORD

the power cord. To test if your power cord is working properly, you must do the following:

 

 

1)Connect the power supply cord to an electrical outlet.

2)The power supply cord has two buttons located on the head of the plug. One button is marked “TEST”, and the other is marked “RESET”. Press the “TEST” button; you will hear a click as the “RESET” button pops out.

3)Press the “RESET” button; you will hear a click as the button engages.

4)The power supply cord is now energized and supplying electricity to the air conditioner (on some products this is also indicated by a light on the plug head).

NOTE: The power cord supplied with this air conditioner contains a current leakage detection device designed to reduce the risk of fire. In the event the power supply cord is damaged, it cannot be repaired and must be replaced with a new cord from the product manufacturer.

Under no circumstances should this device be used to turn the unit on or off.

The “RESET” button must always be pushed in (engaged) for correct operation.

The power supply cord must be replaced if it fails to reset when the “TEST” button is pushed in.

ENERGY-

Your Kenmore appliance is designed to be highly efficient in energy savings. Follow

SAVING TIPS

 

these recommendations for greater efficiency.

1)Select a thermostat setting that suits your comfort needs and leave at that chosen setting.

2)The air filter is very efficient in removing airborne particles. Keep the air filter clean at all times.

3)Use drapes, curtains or shades to keep direct sunlight from penetrating and heating room, but do not allow drapes or curtains to obstruct the air flow around the unit.

4)Start your air conditioner before the outdoor air becomes hot and uncomfortable, to avoid an initial period of discomfort while the unit is cooling off the room. Use of the automatic start/stop programmable TIMER feature can be a major asset in this regard if utilized to the fullest extent.

5)When outdoor temperatures are cool enough, turn the air conditioner off and use the FAN MODE on High, Medium or Low. This circulates indoor air,providing some cooling comfort while utilizing less electricity.

3

 

INSTALLATION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ELECTRIC SHOCK HAZARD: To avoid the possibility of personal injury, disconnect

WARNING

 

power to the unit before installing or servicing.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fig. 1 INSTALLATION ACCESSORIES

Flexible Exhaust Hose (13cm) & Exhaust nozzle connector (2

 

 

 

 

 

 

 

 

Flexible Exhaust Hose

 

Fixture

 

 

 

pcs) from 17 1/10” (45cm) up to 53 1/6” (135cm)

 

 

Exhaust Nozzle

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjustable window door slider kit (3 pcs) from 28 1/3”(72cm) up to

 

 

Connector

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

80” (203cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fixture..... (2 pcs)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Screws......(12 pcs)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: The exhaust/window kit must be installed at all times when

 

 

 

 

Screws

 

 

 

 

 

 

 

 

 

the unit is operating under AIR CONDITIONING mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

There should be at least 11.8” (30cm) clearance between the unit

 

 

 

 

 

 

 

Adjustable Window Slider Kit:

 

and any other objects or building structures, and should be installed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

28 1/3” (72cm)- 80” (203cm)

 

on a level surface. The unit does not have to be vented outside

 

 

 

 

 

 

 

Water hose (79”/ 200cm)

 

 

 

 

during Dehumidifying or Fan Only mode operation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Instructions for Assembling the Window KitFig. 2

 

 

 

Fig. 2

 

Back of Window Pane

1)Insert tube adapters through the back of the window panel.

2)Secure each tube adapter with four screws through the front of the window panel.

3)Insert window panel extensions into window panel. Lightly tighten

the screws in the window panel to hold the extensions in place.

 

 

Tube Adapters

 

 

 

 

 

 

 

WINDOW KIT

Air Conditioning Mode ONLY

Your window kit has been designed to fit most standard “vertical”/”horizontal” windows up to a maximum height of 80” (203cm). For vertical window applications, multi lock positions are provided on the edge of each slider section to secure each sliding section together.

1)Select a suitable location, making sure you have access to an electrical outlet.

2)Install the flexible hose to the rear side of the unit. Insert the hose collar on top of the exhaust opening and twist to lock into position.

3)Install the adjustable Window Slider Kit as required (see Fig. 3a & 3b).

4)Install the opposite end of the flexible exhaust hose into the window exhaust adapter.

5)Install the window exhaust adapter into the opening in the slider section, making sure the window slider sections are secure.

6)Plug the unit into a 115V/60Hz grounded electrical outlet.

Horizontal Window

Window

 

 

Slider Kit:

 

 

Min.: 28 1/3

 

Vertical

(72cm)

 

Max.: 80”

 

Window

 

(203cm)

Window Slider Kit:

 

Min.: 28

1

 

/3” (67.5cm)

 

Max.: 80” (203cm)

 

Fig. 3a

Fig. 3b

 

4

OPERATION

FEATURES OF

THE CONTROL

PANEL

KEY PAD FUNCTIONS

POWER SWITCH: Turns unit ON/OFF

MODE: Allows you to scroll through and select desired operating mode.

FAN: Select from three different fan settings; High, Medium, and Low.

AUTO-TIMER

AUTO-TIMER Adjust:

Auto off- With machine in running mode, press timer button to set timer control. Press or buttons to select number of hours you would like the unit to run before it automatically shuts off.

Auto on- With machine in stand by mode, press timer button to set timer control. Press or buttons to select number of hours before the unit automatically starts running in air conditionning mode.

NOTE: The time is adjustable between 1-24 hours.

TEMPERATURE Adjust:

Used for adjusting the thermostat.

The default display is room temperature.

In cooling mode, when button is pressed, the set temperature is displayed and may be adjusted. After 15 seconds the display will revert back to room temperature. Temperature is only adjustable in cool mode.

NOTE: By pressing both buttons at the same time for more than 3 seconds, the display will toggle between Celsius and Fahrenheit.

STATUS DISPLAY

Warning Light

Condensed water may accumulate in the unit. If the internal tank becomes full, the Warning signal in the LCD Display will light up and the unit will not operate until the unit has been drained.

Timer & Temp. Display

Room Temp.

Temp. Set

Timer Set

MODE INDICATOR LIGHTS

Cooling Mode

When cool mode is selected, the indicator light will shine GREEN. During the cooling mode, the air is cooled and hot air is exhausted outside through the exhaust tube. Adjust fan speed to suit your desired comfort level.

Note: The air exchange h ose must vent outside the room when using cool mode.

Dehumidify Mode

When dehumidify mode is selected, the indicator light will shine ORANGE. Air is

dehumidified as it passes through the unit, without being in full cooling mode. The fan will operate on med. speed. If room temperature is >25°C (77°F), fan speed can be adjusted; otherwise fan speed is fixed to “low”.

Note: The warm air exchange hose must vent inside the room when using Dehumidify Mode, not outside as it does when cooling. If the unit is vented outside, some cooling will occur.

Fan Mode

When fan mode is selected, the indicator will shine YELLOW. Air is circulated throughout the room with no cooling.

Note: The unit does not need to be vented in Fan mode.

Heating Mode

When heating mode is selected the indicator will shine RED. Heating is activated only when the ambient temperature is below 25°C (77°F).

FAN SPEED INDICATOR LIGHTS

High Fan

Medium Fan

Low Fan

NOTE: After switching the air conditioner off, you must wait 3 minutes before switching it back on again.

5

+ 14 hidden pages