Daewoo DV1030 User Manual

DV1030

User’s Guide

DC-B86B1N-PS 04.5.20 9:28 PM 페이지A

PRODUCT INFORMATION

IMPORTANT SAFEGUARDS

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and servicing

instructions in the literature accompanying the

appliance.

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

IMPORTANT FOR LASER PRODUCTS

LASER This Digital Video Disc Player employs a Laser System. To ensure proper use of this product

please read this owner’s manual carefully and retain for future reference. Should the unit

require maintenance, contact an authorized service location - see service procedure.

Use of control adjustments or the performance of procedures other than those specified may

result in hazardous radiation exposure.

To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser

radiation when open and interlocks defeated.

DO NOT STARE INTO THE BEAM.

DANGER Visible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

CAUTION Do not open the top cover. There are no user serviceable parts

inside the Unit; leave all servicing to qualified service personnel.

CLASS 1

LASER PRODUCT

FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rule. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception; which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experience radio/TV technical for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

This device must accept any interference received, including interference that may

cause undesired operation.

CAUTION Any changes or modification in construction of this device which are not expressly

approved by the party responsible for compliance could void the user’s authority to

operate the equipment.

DC-B86B1N-PS 04.5.20 9:28 PM 페이지1

This set has been designed and manufactured to

assure personal safety. Improper use can result

in electric shock or fire hazard. The safeguards

incorporated in this unit will protect you if you

observe the following procedures for

installation, use and servicing. This unit is fully

transistorized and does not contain any parts

that can be repaired by the user.

1 Read Instructions

All the safety and operating instructions

should be read before the unit is operated.

2 Retain Instructions

The safety and operating instructions should

be retained for future reference.

3 Heed Warnings

All warnings on the unit and in the operating

instructions should be adhered to.

4 Follow Instructions

All operating and use instructions should be

followed.

5 Cleaning

Unplug this unit from the wall outlet before

cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for

cleaning.

6 Attachments

Do not use attachments unless

recommended by the unit’s manufacturer as

they may cause hazards.

7 Water and Moisture

Do not use this unit near water- for example,

near a bath tub, wash bowl, kitchen sink or

laundry tub, in a wet basement, or near a

swimming pool and the like. Caution :

Maintain electrical safety. Powerline

operated equipment or accessories

connected to this unit should bear the UL

listing mark or CSA certification mark on the

accessory itself and should not be modified

so as to defeat the safety features. This will

help avoid any potential hazard from

electrical shock or fire. If in doubt, contact

qualified service personnel.

8 Accessories

Do not place this unit on an unstable cart,

stand, tripod, bracket, or table. The unit may

fall, causing serious injury to a child or adult

as well as serious damage to the unit. Use this

unit only with a cart, stand, tripod, bracket,

or table recommended by the manufacturer.

8A A unit and cart

combination should

be moved with care.

Quick stops,

excessive force, and

uneven surfaces may

cause the unit and

cart combination to overturn.

9 Ventilation

Slots and openings in the case are provided

for ventilation to ensure reliable operation of

the unit and to protect it from overheating.

These openings must not be blocked or

covered. These openings must not be

blocked by placing the unit on a bed, sofa,

rug, or other similar surface. This unit should

never be placed near or over a radiator or

heat radiator. This unit should not be placed

in a built-in installation such as a bookcase

or rack unless proper ventilation is provided

or the manufacturer’s instructions have been

adhered to.

10 Power Sources

This unit should be operated only from the

type of power source indicated on the

marking label. If you are not sure of the type

of power supply to your home, consult your

dealer or local power company. For units

intended to operate from battery power, or

other sources, refer to the operating

instructions.

11 Grounding or Polarization

This unit is equipped with a polarized

alternating -current line plug (a plug having

one blade wider than the other). This plug

will fit into the power outlet only one way.

This is a safety feature. If you are unable to

insert the plug fully into the outlet, try

reversing the plug. If the plug still fails to fit,

contact your electrician to replace your

obsolete outlet. To prevent electric shock, do

not use this polarized plug with an extension

cord, receptacle, or other outlet unless the

blades can be fully inserted without blade

exposure. If you need an extension cord, use

a polarized cord.

12 Power-Cord Protection

Power-supply cords should be routed so that

they are not likely to be walked on or

pinched by items placed upon or against

them, paying particular attention to cords at

plugs, convenience receptacles, and the

point where they exit from the unit.

Note to CATV system installer

This reminder is provided to call the CATV

system installer’s attention to Section 820-40

of the NEC which provides guidelines for

proper grounding and, in particular, specifies

that the cable ground shall be connected to

the grounding system of the building, as

close to the point of cable entry as practical.

13 Outdoor Antenna Grounding

If an outside antenna or cable system is

connected to the product, be sure the

antenna or cable system is grounded so as

to provide some protection against voltage

surges and built-up static charges. Section

PORTABLE CART WARNING

(symbol provided by RETAC)

IMPORTANT SAFEGUARDS

DC-B86B1N-PS 04.5.20 9:28 PM 페이지2

PRODUCT INFORMATION

810 of the National Electrical Code,

ANSI/NFPA No. 70-1984 (Section 54 of

Canadian Electrical Code, Part 1) provides

information with respect to proper grounding

of the mast and supporting structure,

grounding of the lead-in wire to an antenna-

discharge unit, connection to grounding

electrodes, and requirements for the

grounding electrode. See example as shown.

14 Power Lines

An outside antenna system should not be

located in the vicinity of overhead power

lines, other electric light or power circuits, or

where it can fall into such power lines or

circuits. When installing an outside antenna

system, extreme care should be taken to

keep from touching or approaching such

power lines or circuits as contact with them

might be fatal. Installing an outdoor antenna

can be hazardous and should be left to a

professional antenna installer.

15 Lightning

For added protection for this unit during a

lightning storm, or when it is left unattended

and unused for long periods of time, unplug

it from the wall outlet and disconnect the

antenna or cable system. This will prevent

damage to the unit due to lightning and

power line surges.

16 Disc Tray

Keep your fingers well clear of the disc as it

is closing. It may cause serious personal

injury.

17 Overloading

Do not overload wall outlets or extension

cords as this can result in a risk of fire or

electric shock.

18 Object and Liquid Entry

Never push objects of any kind into this unit

through openings as they may touch

dangerous voltage points or “short-out” parts

that could result in a fire or electric shock.

Never spill liquid of any kind on the unit.

19 Burden

Do not place a heavy object on or step on

the product. The object may fall, causing

serious personal injury and serious damage

to the product.

20 Disc

Do not use a cracked, deformed or repaired

disc. These discs are easily broken and may

cause serious personal injury and product

malfunction.

21 Servicing

Do not attempt to service this unit yourself as

opening or removing covers may expose you

to dangerous voltage or other hazards. Refer

all servicing to qualified service personnel.

22 Damage Requiring Service

Unplug this unit from the wall outlet and

refer servicing to qualified service personnel

under the following conditions.

A When the power-supply cord or plug is

damaged.

B If liquid has been spilled, or objects have

fallen into the unit.

C If the unit has been exposed to rain or water.

D If the unit does not operate normally by

following the operating instructions. Adjust

only those controls that are covered by the

operating instructions. Improper adjustment

of other controls may result in damage and

will often require extensive work by a

qualified technician to restore the unit to its

normal operation.

E If the unit has been dropped or the cabinet

has been damaged.

F When the unit exhibits a distinct change in

performance-this indicates a need for

service.

23 Replacement Parts

When replacement parts are required, have

the service technician verify that the

replacements he uses have the same safety

characteristics as the original parts. Use of

replacements specified by the unit

manufacturer can prevent fire, electric

shock, or other hazards.

24 Safety Check

Upon completion of any service or repairs to

this unit, ask the service technician to

perform safety checks recommended by the

manufacturer to determine that the unit is in

safe operating condition.

25 Wall or Ceiling Mounting

The product should be mounted to a wall or

ceiling only as recommended by the

manufacturer.

26 Heat

The product should be situated away from

heat sources such as radiators, heat registers,

stoves, or other products (including

amplifiers) that produce heat.

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

ANTENNA LEAD

IN WIRE

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250 PART H)

GROUND CLAMP

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

EXAMPLE OF ANTENNA

GROUNDING

NEC - NATIONAL ELECTRICAL CODE

IMPORTANT SAFEGUARDS

DC-B86B1N-PS 04.5.20 9:28 PM 페이지3

FEATURES...

• DVD, VCD, MP3 on CD-R/RW, and VHS playback

• Watch DVD and Record TV at the same time

• Multi-function remote control (VCR, DVD)

• Video Index Search System (VISS)

• Multi-channel Television Sound (MTS) playback/record

• High Quality 6-Head Hi-Fi Sound

• One Touch Recording (OTR)

• Progressive Scan

• MP3 playback

• Graphical On Screen Display (OSD)

• Screensaver function (DVD)

• 3D Sound (3D sound effect using 2 speakers)

• High bit / high sampling with 27MHz / 10bit video encoder

• High bit / high sampling with 96KHz / 24bit audio D/A converter

• Coaxial digital audio output (PCM, Dolby Digital, dts)

• Built-in Dolby Digital decoder (DVD)

• Analog audio 2-channel output for DOWNMIX (x1)

• Composite video out (x1)

• Slow Forward / Reverse (DVD) playback

• Fast Forward / Reverse playback

• DVD Title, Chapter and Time Search, and CD/VCD Track and Time Search

• Adjustable TV Aspect Ratio

• Repeat playback

• A-B Repeat (DVD)

• English, French and Spanish OSD

• Parental Lock (DVD)

• Multi Angle function (DVD)

This function allows you to choose the viewing angle of scenes which were shot from a number

of different angles. (The number of angles available depends on the disc.)

• Zoom function (DVD/VCD)

• Auto Clock Set

DC-B86B1N-PS 04.5.20 9:28 PM 페이지4

PRODUCT INFORMATION

READ CAREFULLY BEFORE USING

Please read carefully before using this DVD

player.

Placement and handling

• The picture and sound of a nearby TV, VCR,

or radio may be distorted during playback. In

this case, position the unit away from the TV,

VCR, or radio, or turn off the unit after

removing the disc.

• Do not use volatile liquids, such as

insecticide spray, near the unit. Do not leave

rubber or plastic products in contact with the

unit for a long period of time. They will leave

marks on the surface.

When Not in Use

• When the unit is not in use, be sure to

remove the disc or tape and turn off the

power.

• If you do not use the unit for a long period of

time, remove the remote control batteries to

prevent leakage.

Moving

• The original shipping carton and packing

materials come in handy. For maximum

protection, re-pack the unit as it was

originally packaged at the factory.

• Remember to eject any videotape or disc.

Cleaning

• Use a soft, dry cloth. If the surfaces are

extremely dirty, use a soft cloth lightly

moistened with a mild detergent solution. Do

not use strong solvents such as alcohol,

benzine, or thinner, as these might damage

the surface of the unit.

Maintenance

• This is a high precision video device. For

optimal performance, we recommend regular

inspection and maintenance every 1,000

hours by qualified service personnel.

Contact your dealer or nearest service center.

Antenna Orientation

• Antennas are subject to changes in direction

or damage due to wind and rain. For best

results, contact your nearest service center

about proper orientation and/or replacement.

• It is forbidden by law to copy, broadcast,

show, broadcast via cable, play in public, or

rent copyrighted material without

permission.

Tape and Disc Handling

• To prevent damage to the unit, do not use

moldy, stained, scratched or otherwise

damaged tapes or discs.

• Condensation may be present on your

videotape. Allow the tape to dry completely

before using it.

• After playing, store discs and tapes in their

cases to prevent damage.

• Do not expose discs or tapes to high

temperatures, humidity, mold, direct

sunlight, dirt, dust or strong magnetic

materials.

Using the Remote Control

• Operate remote control within 23 ft. (7m) of

the unit.

• Do not press two buttons at the same time.

• Do not store in a dusty or humid location.

23' (7m)

DC-B86B1N-PS 04.5.20 9:28 PM 페이지5

CONTENTS

Important Safeguards ................................ 1

Features... ................................................. 4

Read Carefully Before Using ..................... 5

Contents ................................................... 6

Identification of Controls .......................... 7

Remote Control ...................................... 10

Connecting to a TV.................................. 12

Connecting a Cable Box .........................13

Connecting Other Video Equipment ....... 14

Connecting to a Stereo Receiver ............. 15

Connecting to a Dolby Digital decoder or

DTS decoder........................................... 16

Output Select .......................................... 17

DVD Playback ........................................ 18

VCR Playback ........................................ 20

Clock Set ............................................... 21

4. VCR OPERATION

Memorizing TV Channels ...................... 22

Recording ............................................... 24

Timer Recording ................................... 26

Watching and Recording Cable TV ......... 29

Using Advanced VCR Features ............... 30

Hi-Fi Stereo Playback .............................. 34

3. BASIC OPERATION

2. INSTALLATION

Playing a Desired Scene .......................... 35

Confirming Current Play Mode ............... 39

Zoom, Multi Angle and 3D Audio ........... 40

About MP3, JPEG discs . .......................... 41

Displaying Disc Menus............................ 44

Progressive Scan Mode ........................... 44

DVD LANGUAGE Setup.......................... 45

VIDEO Setup ........................................... 47

AUDIO Setup ......................................... 48

Others Setup ........................................... 49

About DVD ............................................. 51

About VCR and Videotape...................... 53

Troubleshooting (DVD) ........................... 54

Troubleshooting (VCR)............................. 55

Specifications ......................................... 57

6. DVD FEATURE SETUP

5. DVD OPERATION

7. HELP

1. PRODUCT INFORMATION

DC-B86B1N-PS 04.5.20 9:28 PM 페이지6

PRODUCT INFORMATION

IDENTIFICATION OF CONTROLS

! √ Power button

Use to power the device on/off if AC power

supply is connected.

@ Use to insert videotape

# Disc tray

$ Video input jack

% Audio input jacks

^ VCR Eject button

& Record button

* Channel DOWN/UP buttons

( Operation Display Window

Displays the status of device. For more

information, see “Operation Display

Window” on the next page.

) DVD/VCR button

Use to change DVD mode to VCR mode,

and vice versa.

1 Stop button

Use to stop playing.

2 Rewind button

Use to rewind videotape or skip to the

previous chapter of a disc.

3 PLAY/PAUSE button

Use to start and pause playback of videotape

or disc.

4 Fast Forward button

Use to fast forward videotape or skip to the

next chapter of a disc.

5 DVD Eject button

$ ^ ( ) 521 43&%

@ #

Front Panel

DC-B86B1N-PS 04.5.20 9:28 PM 페이지7

Operation Display Window

IDENTIFICATION OF CONTROLS

Timer Recording on

Standby

Timer Recording Error

Recording in Progress

Timer Recording in

Progress

Recording Pause

Repeat one chapter

Repeat all chapters

Repeat a defined period

from A

Repeat a defined period

from A to B

- RECORDING MODE - - REPEAT MODE -

DVD playback

Fast playback

Fast reverse playback

Slow playback

Still picture

Progressive Scan mode

Interlaced Scan mode

- DVD OPERATION -

VCR playback

Fast forward

Rewinding

Fast playback (CUE)

Fast reverse playback

(REVIEW)

Slow playback

Still picture

Stop

Child Lock

- VCR OPERATION -

DC-B86B1N-PS 04.5.20 9:28 PM 페이지8

PRODUCT INFORMATION

IDENTIFICATION OF CONTROLS

Rear Panel

DVD ONLY

DVD + VCR

AUDIO

OUT

DIGITAL

AUDIO OUT

COAXIAL

COMPONENT

VIDEO OUT

VIDEO

OUT

VIDEO 1

(FROM ANT.)

OUT

(TO TV)

S-VIDEO OUT

AUDIO

VIDEO

^ *&$# %

! Power Cord

Connect to wall outlet.

@ Digital Output (COAXIAL) Jack

Connect to digital receiver/ amplifier or

digital audio decoder.

# AUDIO Out Jack

$ COMPONENT Video Out Jack

For best picture quality, connect the unit to

TV or monitor with COMPONENT(480i)

input.

% S-Video Output Jack

^ A/V Output Jack

& A/V Input Jack

* Connection to Antenna/Cable

( Connection to TV

Accessories

Remote Control 2 Batteries RF Cable

Audio/Video Cable

Owner’s Manual/

Warranty

• To purchase accessories or additional parts, contact your nearest dealer or service center.

DC-B86B1N-PS 04.5.20 9:28 PM 페이지9

REMOTE CONTROL

Switches the DVD+VCR on or off.

[DVD]

Opens/closes the disc tray,

[VCR]

Ejects a tape

Changes to VCR mode.

Changes to DVD mode.

Selects the devices connected to the Audio/Video sockets

(AV1, AV2, DVD, VCR ).

Number entry

[VCR]

Manually reduces of streaks or picture "jitter".

[DVD]

Activates Progressive Scan button,

[VCR]

Number 100

button

Navigate through the menus.,

[VCR]

Channel Up/Down

button

Confirms a menu selection.

[DVD]

Removes any menu or display from the screen.

[VCR]

Resets the time counter to 0:00:00. Also clears on-

screen menu item entries when setting the time and

date or timer recordings.

[DVD, VCR]

Shows the status displays.

[DVD, VCR]

Displays or exits the SETUP menu.

[DVD]

Displays the title menu when playing a DVD.

Activates PBC mode when playing a VCD.

[DVD]

Accesses the disc menu during play (if there is one).

[DVD]

Selects a desired language for the subtitle.

[VCR]

Selects a desired audio

[DVD]

Activates Chapter/Title/Time SEARCH

[DVD]

Activates the Zoom function

DC-B86B1N-PS 04.5.20 9:28 PM 페이지10

PRODUCT INFORMATION

Press the [POWER √] button on the remote control for about 8 seconds. All front panel

and remote control buttons are now locked, and the Lock indicator (“ ”) will be

displayed on window display. To release child lock, press the [POWER √] button again

for about 8 seconds.

Child Lock!!!

Starts playing a disc or a tape.

Pauses playback or recording modes.

Starts fast reverse, reverses accelerated play or reverses

slow motion

Starts fast forward, forward accelerated play or forward

slow motion

Stops play, accelerated search, slow motion or recording.

[VCR]

Starts record mode on tapes with the safety tab intact.

Press this repeatedly to set a recording duration for OTR.

[VCR]

Overrides the default recording speed (either SP or

SLP).

[DVD]

Skips back to previous chapter or track in playback

mode

[DVD]

Skips forward to next chapter or track in playback

mode, advances one frame in pause mode

[VCR]

Advances one frame in pause mode

[DVD]

Allows selection of a section and will play it

repeatedly.

[DVD]

Repeats a Title, Chapter, Disc, One, Directory or

Random playback.

[DVD, VCR]

Switches between TV and VCR

[DVD]

Selects virtual 3D sound effect between VSR (Virtual

Surround mode) and EST (Enhanced Stereo mode)

[DVD]

Stores bookmarks in memory to be viewed (listened

to) again

[DVD]

Accesses multiple camera angles if any were added

to the disc when it was created.

[VCR]

Commercial Skip skips forward 30 seconds

[VCR]

Replays previous 15 seconds

[VCR]

Go to Last Channel button

[VCR]

TIMER RECORDING button,

[DVD]

PROGRAM

Playback button

REMOTE CONTROL

DC-B86B1N-PS 04.5.20 9:28 PM 페이지11

Various methods of connecting your TV

AUDIO

VIDEO

S-VIDEO

ANT INPUT

S-VIDEO INPUT

A/V INPUT

COMPONENT INPUT

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PRESONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

20181614 12108643

21191715 13119753 1

DVD ONLY

DVD + VCR

AUDIO

OUT

DIGITAL

AUDIO OUT

COAXIAL

COMPONENT

VIDEO OUT

VIDEO

OUT

VIDEO 1

(FROM ANT.)

OUT

(TO TV)

S-VIDEO OUT

AUDIO

VIDEO

Method 1

Unplug the RF cable from the “ANT.IN” Jack on the rear panel of the TV. Plug this cable into the

“ANT.IN” jack on the rear panel of the DVD+VCR. Connect the “RF OUT” jack on the DVD+VCR to

the “ANT.IN” jack on the TV with another RF cable.

If your cable system provides all your channels, connect an RF Cable from the OUT jack of the

Cable Box to the "IN From Antenna" jack on the DVD+VCR unit.

Method 2 : Connecting to a TV equipped with audio/video in jacks

Use the supplied audio/video cable to connect the Video Out jack on the DVD+VCR to the Video In

jack on your TV. Connect the Audio Out jack on the DVD+VCR to the Audio In jack on the TV.

Match the color of the cable to the color of the jack.

Method 3 : Connecting to a TV equipped with component video in jacks

Connect component video cables (not supplied) from the Component Video Out jacks on the

DVD+VCR to the Component Video In jacks on the TV. If you do not receive a clear picture using

the Component Video Pr, Pb, Y jacks, try connecting to the Cr, Cb, Y jacks instead. The component

video connection only works in DVD playback mode.

To use the VCR or view TV channels, you still need to connect the RF cable or the audio/video

cables.

Method 4

: Connecting to a TV equipped with S-Video in jacks

Connect an S-Video cable (not supplied) between the S-Video Out jack on the DVD+VCR to the S-

Video In jack on the TV. The S-Video connection only works in DVD playback mode. To use the

VCR or view TV channels, you still need to connect the RF cable or the audio/video cables.

■ The default RF Output channel is CH3. If Channel 3 is used by a TV station, you must change it

to Channel 4. See "To Set Output Channel" on page 23.

CONNECTING TO A TV

• VHF: TV channels 2~13, UHF: TV channels 14~69, CATV: Cable TV

Outside Antenna or Wall

Antenna Outlet

Rear Panel of DVD+VCR

Rear Panel of TV

Method 1

Method 2

Method 3

Method 4

DC-B86B1N-PS 04.5.20 9:28 PM 페이지12

INSTALLATION

CONNECTING A CABLE BOX

How to connect

INPUT 1

OUT

ANT IN

INPUT 2

DVD + VCR

VIDEO

OUT

VIDEO 1

(FROM ANT.)

OUT

(TO TV)

AUDIO

VIDEO

How to watch regular TV and record Cable TV

1 Set the Channel Select switch on your cable Box to CH 3. If Channel 3 is used by a local TV

station, you must change it to Channel 4.

2 Select the channel to be recorded on the Cable Box.

3 Press the [REC] button on the DVD+VCR.

4 To watch regular TV while you record from cable, press the [TV/VCR] button on the DVD+VCR

and select the desired channel on your TV. Because of the nature of cable boxes, you cannot

watch one Cable TV channel and record another at the same time.

1 Connect the RF cable from the cable wall outlet to the RF In jack on your Cable Box.

2 Connect a second RF cable from the RF Out jack on the Cable Box to the IN (FROM ANT.) jack

on the back panel of the DVD+VCR.

3 Connect the supplied RF cable from the OUT (TO TV) jack on the back panel of the DVD+VCR

to your television’s Antenna In jack. Or for improved picture and sound quality, connect an

audio/video cable from the Audio/Video Out jacks on the DVD+VCR to the Audio/Video In jacks

on your TV.

4 Connect the DVD+VCR power cord to a standard wall outlet.

5 Power on the DVD+VCR, TV, and Cable Box.

6 If you are using the RF connection, set your TV to Channel 3 or 4 to view the DVD+VCR. If you

are using the Audio/Video connection, set your TV to its line input to view the DVD+VCR.

Rear Panel of DVD+VCR

Cable Box/

Satellite Receiver

Rear Panel of TV

RF Cable

AUDIO/VIDEO Cable

Cable Antenna

RF Cable

DC-B86B1N-PS 04.5.20 9:28 PM 페이지13

CONNECTING OTHER VIDEO EQUIPMENT

How to Connect

AUDIO

VIDEO

ANT INPUT

A/V OUTPUT

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PRESONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

201816141210 8643

211917151311 97531

DVD ONLY

DVD + VCR

AUDIO

OUT

DIGITAL

AUDIO OUT

COAXIAL

COMPONENT

VIDEO OUT

VIDEO

OUT

VIDEO 1

(FROM ANT.)

OUT

(TO TV)

S-VIDEO OUT

AUDIO

VIDEO

How to Copy (Edit) Tape with Other Video Equipment

1 Connect audio/video cables from the Audio/Video Out jack on your other video equipment to

the Audio/Video In jack on rear panel (or front panel) of DVD+VCR.

2 Connect an RF cable from the “ANT. IN” jack on a TV or satellite receiver to the “RF.OUT” jack

on the DVD+VCR.

3 To record other video equipment with the DVD+VCR, insert a tape with the record safety tab

intact into DVD+VCR and follow the instructions for recording on page 24.

1 Turn on the DVD+VCR.

2 Press [TV VIEW] and set the DVD+VCR to display “Video 1” or “Video 2” on TV screen.

3 Press [PLAY] on the other video equipment.

4 Press [REC] on the DVD+VCR when you want to record from the other video equipment.

5 Press [Pause] on the DVD+VCR to prevent recording a scene you do not want.

(Caution) Recording is stopped automatically after 5 minutes in Pause mode. Press the [REC]

button again if you want to resume recording.

Playback VCR,

Camcorder,

Satellite Receiver ...

...

RF Cable

AUDIO/VIDEO Cable

■ You can connect a wide variety of audio/video equipment to your DVD+VCR, including an

additional VCR, Laser Disc Player, DVD Player, Camcorder, Satellite Receiver, or Video Game.

Because these devices use all of connections, they are described together.

DC-B86B1N-PS 04.5.20 9:28 PM 페이지14

INSTALLATION

How to Connect

CONNECTING TO A STEREO RECEIVER

AUDIO

ANT INPUT

AUDIO INPUT

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PRESONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

201816141210 8643

211917151311 97531

S-VIDEO

S-VIDEO INPUT

DVD ONLY

DVD + VCR

AUDIO

OUT

DIGITAL

AUDIO OUT

COAXIAL

COMPONENT

VIDEO OUT

VIDEO

OUT

VIDEO 1

(FROM ANT.)

OUT

(TO TV)

S-VIDEO OUT

AUDIO

VIDEO

1 Connect audio/video cables from the AUDIO OUT jack on the rear panel of the DVD+VCR to

the In jack of the stereo receiver.

2 On the stereo's control panel, select the “External Input” that you connected to the DVD+VCR.

3 Turn on the stereo receiver and start playback of a DVD disc or Hi-Fi videotape. You should hear

sound from the speakers connected to your stereo receiver.

DC-B86B1N-PS 04.5.20 9:28 PM 페이지15

CONNECTING TO A DOLBY DIGITAL

DECODER OR

DTS DECODER

How to Connect

AUDIO

COAXIAL

ANT INPUT

AUDIO INPUT

DIGITAL AUDIO INPUT

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PRESONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

201816141210 8643

211917151311 97531

VIDEO

VIDEO INPUT

DVD ONLY

DVD + VCR

AUDIO

OUT

DIGITAL

AUDIO OUT

COAXIAL

COMPONENT

VIDEO OUT

VIDEO

OUT

VIDEO 1

(FROM ANT.)

OUT

(TO TV)

S-VIDEO OUT

AUDIO

VIDEO

If you are playing a DVD disc that has a soundtrack in 5.1 channel Dolby Digital Surround, or DTS

surround formats, the DVD+VCR outputs a Dolby Digital or DTS data stream from its COAXIAL

DIGITAL AUDIO OUT jack. By hooking the DVD+VCR up to a Dolby Digital or DTS decoder, you

can enjoy high-quality surround sound.

1 Connect a coaxial digital audio cable (not included) from the DIGITAL AUDIO OUT jack on the

DVD+VCR to the Digital Audio In jack on the decoder.

2 Connect the TV as explained on page 12, for playback and recording of videotapes.

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Home Theater Receiver

with Dolby Digital

decoding capability

Not all DVD discs have these soundtrack formats.

DC-B86B1N-PS 04.5.20 9:28 PM 페이지16

INSTALLATION

Press the [DVD] button.

"DVD" lights on the operation display window and all remote control buttons control the DVD

player.

To Select VCR

Press the [VCR] button.

"VCR" lights on the operation display window and all remote control buttons control the VCR.

To Watch TV or External Input

Press the [TV VIEW] button.

The unit will cycle through DVD PLAYBACK ➝ BROADCASTING RECEPTION ➝ EXTERNAL

INPUT (Video 1, Video 2). If the status of VCR is PLAYBACK (or RECORDING) MODE, the unit will

cycle through VCR PLAYBACK. (or RECORDING) ➝ DVD.

Stop when you see the viewing mode you want.

To Select DVD

OUTPUT SELECT

BASIC OPERATION

DC-B86B1N-PS 04.5.20 9:28 PM 페이지17

+ 41 hidden pages