Wireless RFlink
Numerical Control CybTouch 6 C
The CybTouch 6 C for conventional* press brakes is specifically intended for sheet metal bending.
*Press brakes with torsion bar.
Ordering information
CybTouch 6 C
• In box version white color S-CBT-62CA10/BW
• In box version grey color S-CBT-62CA10/BG
• In panel version S-CBT-62CA10/P
Options:
RFlink USB key for PC including CybTouchTools software S-OPT-RFLINK
USB key for
PC.
Datasheet_CybTouch6_C_v2.3.doc / June 2014
1/5
Advantages
• Can easily be integrated into existing
• Ver y intui ti ve, no expla nat io ns required.
FOR OEM
electrical box diagrams. Ideal for upgrading
machines without NC with minimal
changes.
• Reduced electrical wiring, electrical cabinet
size and equipment for lower start-up costs
on each press brake.
• Flexible software for configuration of axes,
inputs-outputs and auxiliary functions
according to specific needs.
• A configuration table for valves sequencing
allows total flexibility to adapt the numerical
control to the hydraulic.
• Screen content can be simplified to its
minimum by removing all unnecessary
functions, buttons or information.
• Quick set-up thanks to wizards for adjusting
axes, gains, speeds, beam and indexes.
• New indexing functions reduce the quantity
of switches and wiring, while providing
more reliable indexing.
• CybTouch accepts encoders with or without
complementary signals.
• RFlink*, a wireless radio frequency
transmission integrated in the CybTouch,
allows easy parameters backups or
firmware upgrades. This provides modern,
fast and simple communication, with no
need to open the housing, no need of
connecting cable.
FOR END USER
• O perator im mediately feels confident and
comfortable using this control.
User intuitively enters the angle, the desired
position of the bend and the thickness of the
material. No need to erase, memorize or
change modes. The depth and back gauges,
are automatically adjusted.
• EasyBend page provides immediate easy use
of the machine: a second operator can briefly
interrupt production without changing the
program when an urgent bend is required.
• Energy saving thanks to integrated Eco mode
function that automatically stops the main
pump after x minutes of inactivity.
• Full touch screen human machine interface
offers the best of modern technology.
• Colors are vivid but not aggressive, prov iding
excellent readability thanks to the large
characters and big buttons.
• Recurrent programs for producing complex
parts can be created and memorized for easy
reuse.
• Pop-up messages for security or external
malfunctions.
• RFlink* wireless radio frequency data
communication allows backup and restoring
operations without any cable connection to the
numerical control.
• Many languages availa ble dir ectly in the
CybTouch. Instant langu ag e chan ge with out
restarting the NC.
• Internal backup in a special safe memory
allows the user to restore at any time the
original parameters; machine is running again
in an extremely short time in the event of a
memory loss or involuntary parameter
modification.
*Need RFlink USB key (option)
Datasheet_CybTouch6_C_v2.3.doc 2/5
Axis and bending functions
Back gauge axis & depth gauge
Y and X axes.
Auto-tuning of the axes.
Configurable retraction of the back gauge during the bending process.
Indexing in several modes.
Encoders with or without complementary signals.
Inch / mm.
Bending features
Program page at start up for quick accessibility.
User friendly graphic tool management.
Automatic calculation of:
According to the programmed material, thickness, bend angle and selected tools.
Variable opening (TDC) for each sequence
Backgauge clearance during the bending process (yes / no).
Automatic back gauge correction according to the bend and flange length (bend a llow ance) .
Sequence repetition.
Part counter with auto-stop.
Time and stroke counters for oil service.
Eco mode for main pump power off and electricity saving (green mode).
Pump start button.
Memory capacity
Punches 10
Dies 10
Programs 50
Sequences per program 12
The below elements are available and can be configured on CybTouch P by the OEM.
However, some functions depend on the machine construction.
Available features depend on the n u mber of available axes and inputs/outputs.
• Bend depth.
• Back gauge positioning.
• Angle correction.
• Bend allowance.
Datasheet_CybTouch6_C_v2.3.doc 3/5
Technical Characteristics
Characteristic
CybTouch 6 C
Screen
5.7" color graphic CRT screen 640 x 480 pixels with LED backlight control.
Work memory
SRAM / SDRAM
System memory
FLASH memory with firmware update via RFlink.
Communication
Cybelec RFlink* (radio frequency link).
• +/- 10VDC management of AC/DC drives and motors.
• SP-SN 0-10 VDC 2 adjustable speeds.
Units
Conversion Inch/mm.
• NC: stabilized + 24VDC -15% / + 20% 10W
• digital inputs/outputs: stabilized + 24VDC -15% / + 20%
2 encoders
Complementary signals are not necessary, but recommended.
Power supplies
for encoders
Optocoupled
Digital inputs
6 inputs.
Analog inputs
1 analog input 0-10 VDC..
10 outputs
Possibility to define 2 outputs for doubling the current.
2 analog outputs -/+10 VDC,
Short circuit proof.
DC reference
voltage
Operating
conditions
Min. 5° Celsius, max. 40° Celsius.
Relative humidity 10 to 85% noncondensing.
Dimensions
See diagram next page.
EC Directives
IEC61131-2.
Axis
Power supplies
Encoder inputs
Digital outputs
Analog outputs
• 0-10 VDC frequency converter for AC asynchronous motors.
• SP-SN-HS 2 speeds mode.
5 VDC or 12 VDC* or 24 VDC* (* = external power supply).
5 VDC (supplied by CybTouch) max. 250 mA for each encoder.
Optocoupled, fuse protected.
24 VDC source mode, typ. 0.7A / output.
impedance out < 100 Ω,
load ≥ 1 kΩ (max 15 mA).
10V +/- 3mV, 50 mA max
*Need RFlink USB key (option)
Datasheet_CybTouch6_C_v2.3.doc 4/5
Dimensions
Box version
Panel version
Datasheet_CybTouch6_C_v2.3.doc 5/5
Loading...