Clarion VRX935VD User Manual 2

Owner’s manual & Installation manual

사용 설명 및 설치 설명서

R

R

AM/FM DVD VIDEO / VIDEO CD / CD / MP3
PLAYER / CD CHANGER CONTROLLER WITH
7" LC DISPLAY

帶７英寸液晶顯示器調帶７英寸液晶顯示器調

帶７英寸液晶顯示器調

帶７英寸液晶顯示器調帶７英寸液晶顯示器調
DVD VIDEO/VIDEO CD/CD/MP3DVD VIDEO/VIDEO CD/CD/MP3

DVD VIDEO/VIDEO CD/CD/MP3

DVD VIDEO/VIDEO CD/CD/MP3DVD VIDEO/VIDEO CD/CD/MP3
換片機控制器換片機控制器

換片機控制器

換片機控制器換片機控制器

幅幅

(AM)/ (AM)/

幅

(AM)/

幅幅

(AM)/ (AM)/

調調

頻頻

調

頻

調調

頻頻

播放機播放機

播放機

播放機播放機

(FM) (FM)

(FM)

(FM) (FM)
/ CD / CD

/ CD

/ CD / CD

7인치 LC 디스플레이 화면의 AM/FM

DVD 비디오/비디오 CD/CD/MP3 플

레이어 / CD 체인저 컨트롤러

2002/12 (A·K)

Clarion Co., Ltd.

All Rights Reserved. Copyright © 2002: Clarion Co., Ltd.

Printed in Japan/ 在曰本印刷/일본에서 인쇄하였음.

QC-6810K

280-7947-00

Thank you for purchasing the Clarion VRX935VD.

English

∗ This owner’s manual is for the VRX935VD.
∗ Please read this owner’s manual in its entirety before operating this equipment.
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
∗ This manual includes the operating procedures of the CD changer, MD changer, DVD changer, TV

Owner’s manual

tuner, 5.1ch Surround Decoder. The CD changer, MD changer, TV tuner, 5.1ch Surround Decoder and
DVD Changer have their own manuals, but no explanations for operating them are described.

Contents

■ 샘플 시스템 3

본체

VRX935VD

1. FEATURES ................................................................................................................... 2

2. PRECAUTIONS ............................................................................................................ 3

3. CONTROLS ................................................................................................................... 5

4. NOMENCLATURE ......................................................................................................... 6

5. DISPLAY ........................................................................................................................ 8

6. OUTLINE OF BUTTON AND TOUCHKEY OPERATION

WHEN THE DISPLAY IS OPEN .................................................................................. 10

7. REMOTE CONTROL ................................................................................................... 14

8. DCP .............................................................................................................................. 17

9. CAUTIONS ON HANDLING ........................................................................................ 18

10. DVD VIDEO SYSTEM .................................................................................................. 19

11. OPERATIONS .............................................................................................................. 21

Basic Operations ..........................................................................................................21

Radio Operations ......................................................................................................... 25

DVD Video Player Operations ...................................................................................... 28

VISUAL Operations ...................................................................................................... 43

CD/MD Changer Operations ........................................................................................ 46

DVD Changer Operations ............................................................................................ 50

TV Operations .............................................................................................................. 50

Other Functions ............................................................................................................ 53

5.1ch Surround Decoder Operations ........................................................................... 55

12. IN CASE OF DIFFICULTY ........................................................................................... 59

13. ERROR DISPLAYS ...................................................................................................... 61

14. SPECIFICATIONS ....................................................................................................... 62

Installation and wire connection manual ........................................................................ 63

VISUAL 2 IN

VTR

후면 뷰

모니터

CCA-389

RCA 케이블
(비주얼)

앰프

튜너 앰프

(LINE IN)D

“(LINE IN)D”로

전환하고 선택하기

RCA 케이블

RCA 케이블

N(LINE OUT)

(SRK601 포함)

RCA 케이블

RCA 케이블(별도 판매)

(회색)

RCA 케이블
(비주얼)

튜너 IN

CeNET

VISUAL 1 IN

RCA 케이블

(비주얼)

(5.1 채널 서라운드 디

코더) CeNET 모드 *

RCA 케이블(비주얼)

(VCZ625 포함)

광 디지털 케이블
(DVH920 포함)

TTX7501z

TTX7503z/

TTX7504z

(CeNET TV 튜너)

DVH920

(VCZ625 포함)

CeNET

검은색

광 디지털 케이블

(별도 판매 DCA-

005/008)

1. FEATURES

■ Fully-Motorized 7" Widescreen LCD

■ Touch Panel Control

■ DVD Video/CD-DA/MP3/Video CD Play

Capability

■ 6-Channel, 4Volt RCA Line Level

Output

■ Built-in 53W × 4 Amplifier

■

CeNET with Balanced Audio Line Trans­mission and Dynamic Noise Canceling

2 VRX935VD

■ Multi Angle, Multi Story, Slow Motion
Capability

■ ID3 Tag Capability

■ CD TEXT Capable

■ CD-R/CD-RW Compatible

■ 5.1 Channel Decoder for DTS and

Dolby Digital Capability

■ Optical Digital Output

전면 스피커 후면 스피커

SRK602

(센터 스피커)

(파워 서브 우퍼)

SRV303

VCZ625

(DVD 체인저)

CeNET 모드 *

* 모드 스위치를 CeNET

모드로 전환

VRX935VD 217

(회색)

English

5. DISPLAY

The Color LCD Display and the Information Panel on the main unit show the following displays, pro­viding information about the mode and functions operated.

Owner’s manual

Information Panel

Preset channel indication
Disc number indication

∗The disc numbers corresponding to the

discs in the DVD, CD or MD changer
light.

Operation status indication
∗The frequency, play time,

clock, etc. are displayed.

: Manual indication

: Disc indication

: Scan indication

: Repeat indication

: Random indication

: Beat-EQ indication

: Stereo indication

: Loudness indication

2. PRECAUTIONS

WARNING

For your safety, the driver should not watch the TV or operate the controls while driving.
Please note that watching and operating the TV while driving are prohibited by law in
some countries. Also, while driving, keep the volume to a level at which external sounds
can be heard.

1. When the inside of the car is very cold and
the player is used soon after switching on the
heater, moisture may form on the disc (DVD/
CD/MD) or the optical parts of the player and
proper playback may not be possible. If
moisture forms on the disc (DVD/CD/MD),
wipe it off with a soft cloth. If moisture forms
on the optical parts of the player, do not use
the player for about one hour. The condensa­tion will disappear naturally allowing normal
operation.

2. Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.

3. This unit uses a precision mechanism. Even
in the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.

4. TV broadcast reception
When receiving the TV broadcasts, the

strength of the signals changes since the car
is moving, so in some cases it may not be
possible to receive clear pictures.

• TV signals are strongly linear, so reception is

affected by buildings, mountains and other
obstacles.

• Such external factors such as electric train

lines, a high voltage lines, and signal devices
may disturb the picture or cause noise.

∗ If the reception is poor, switch to a station

with good reception.

INFORMATION FOR USERS:.

CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE MANU­FACTURER WILL VOID THE WARRANTY.

English

Handling Discs

Handling

• New discs may have some roughness around
the edges. If such discs are used, the player

Owner’s manual

may not work or the sound may skip. Use a
ball-point pen or the like to remove any rough­ness from the edge of the disc.

Ball-point pen

Roughness

• Never stick labels on the surface of the disc or
mark the surface with a pencil or pen.

• Never play a disc with any cellophane tape or
other glue on it or with peeling off marks. If
you try to play such a disc, you may not be
able to get it back out of the DVD player or it
may damage the DVD player.

• Do not use discs that have large scratches,
are misshapen, cracked, etc. Use of such
discs may cause misoperation or damage.

• To remove a disc from its storage case, press
down on the center of the case and lift the
disc out, holding it carefully by the edges.

• Do not use commercially available disc pro­tection sheets or discs equipped with stabiliz­ers, etc. These may damage the disc or cause
breakdown of the internal mechanism.

Storage

• Do not expose discs to direct sunlight or any
heat source.

•

Do not expose discs to excess humidity or dust.

•

Do not expose discs to direct heat from heaters.

Cleaning

• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the cen­ter of the disc to the circumference.

• Do not use any solvents, such as commer­cially available cleaners, anti-static spray, or
thinner to clean discs.

• After using special disc cleaner, let the disc
dry off well before playing it.

On Discs

• Exercise a good precaution when loading a

disc with the panel open.

• Never turn off the power and remove the unit

from the car with a disc loaded.

CAUTION

With the screen open, a driver may not see the
disc insertion slot. For your safety, insert a disc
with the screen closed.

No

English

Owner’s manual

Be sure to unfold and read the next page.

이 페이지를 펼친 채로 다음 페이지를 읽어 보십시오.

VRX935VD 38 VRX935VD VRX935VD 4

請務必打開并閱讀下一頁。

English

3.

CONTROLS / 控制部分 / 컨트롤

Main unit / 主機 /

Owner’s manual

With the Display closed /

[Q]

[

]

FUNC

With the Display open /

[

]

LIST

[

]

MENU

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

注意﹕在閱讀每一章時，請務必打開本頁，并參照本頁的前視圖。

참고: 이 페이지를 펼쳐두고, 각 장을 읽을때 전면 그림을 참조하도록 하십시오.

[

VOL

]

[

BAND

본체

顯示屏處于關合狀態

]

[s]

顯示屏處于打開狀態

[

KEY PAD

]

[

ADJ

/

디스플레이가 닫혀져 있을때

] [

[

DIRECT

/

디스플레이가 열려져 있을때

[

]

[

A-M

]

English

4. NOMENCLATURE

Names of Buttons

Owner’s manual

Note:

[

]

DISP

[

]

OPEN

[

RELEASE

[

SENSOR

]

ISR

[

]

MUTE

[

DISP

[

M.L

[

TILT

]

]

]

]

]

]

• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).

When the display closed

[VOL] button

• Use this button to increase/decrease the vol­ume.

[DISP] button

• Use this button to switch the indications such
as play status on the information panel.

[OPEN] button

• Use this button to open/close the liquid crystal
panel.

• Press and hold this button for about 2 sec­onds or longer so that the liquid crystal panel
is positioned horizontally when the liquid crys­tal panel is open. Press the button again to re­turn the panel to the original position. Even if
the button is not pressed, the panel returns to
the original position after about 10 seconds.

[RELEASE] button

• Use this button to remove the DCP from the
main unit.

[SENSOR]

• Remote control infrared sensor.

[ISR] button

• Use this button to enter the ISR (Instant sta­tion recall) standby mode.

[MUTE] button

• Use this button to mute the sound.

[DIRECT] button

• Use this button to select a preset channel in
the radio/TV mode.

• Use this button to select a disc in the changer
mode.

• Press and hold one of the [DIRECT] button for
2 seconds or longer to store the current sta­tion into preset memory.

[a], [d] button

• Use this button to tune to a station in the ra­dio/TV mode.

• Use this button to select a track in the CD,
Video CD, MP3 and CD/MD changer mode.

• Use this button to select a chapter in the DVD
video and DVD changer mode.

[s] button

• Press this button to enter the play pause
mode in the DVD video mode and changer
mode. Press the button again to resume play­back.

[BND] button

• Press this button to switch the receiving
bands for radio/TV mode, etc. Press and hold
this button for 1 second or longer to switch the
SEEK/MANUAL tuning modes.

• Use this button to move to the first track on a
disc in the DVD video mode.

• Use this button to switch to the next disc in
the changer mode.

• Use this button to select visual1 or 2 in the VI­SUAL mode.

[FUNC] button

• Press this button to turn on the power. Press
and hold this button for 1 second or longer to
turn off the power.

• Press this button to switch the modes such as
radio.

[Q] button

• Use this button to eject a disc.

When the display open

[a], [d] button

• Use this button to tune to a station in the ra­dio/TV mode.

• Use this button to select a track in the CD,
Video CD, MP3 and CD/MD changer mode.

• Use this button to select a chapter in the DVD
video and DVD changer mode.

[M.L] button

• The display panel can be switched to a com­posite screen to lock the monitor.

• Press and hold this button for about 1 second
or longer to turn off the monitor.

[TILT] button

• Use this button to adjust the angle of the liquid
crystal panel in 5 steps.

• Every time this button is pressed and held for
about 2 seconds or longer, the liquid crystal
panel moves forward/backward in 3 steps.

[s] button

•

Press this button to enter the play pause mode
in the DVD video mode and changer mode.
Press the button again to resume playback.

[A-M] button

• Shows the AUDIO MODE menu for tone ad­justment, etc. Press and hold this button for 1
second or longer to switch the loudness on or
off (LOUD ON/OFF).

[ADJ] button

• Shows the ADJUST MODE menu to change
the settings.

• Press and hold this button for 1 second or
longer to show the DVD SETUP menu.

[KEY PAD] button

• Press to display the keys (KEY PAD) that cor­respond to play mode.

[MENU] button

• Press this button to show the DVD menu on
the screen in the DVD video and DVD
changer mode.

• Press this button to show the file selection
screen in the MP-3 mode.

• Press and hold this button for 1 second or
longer to show the DVD title screen.

[LIST] button

• Press this button to show the list of the preset
channel on the screen in the radio/TV mode.

• Press this button to show the disc list on the
screen in the CD/MD/DVD changer mode.

[DISP] button

• Press and hold this button for 1 second or
longer to call the LCD background screen
setup menu.

• Press this button to show the information on
the screen in the TV, VISUAL, or DVD video
mode.

• Press and hold this button for 1 second or
longer to switch the display sizes while in the
screen where the TV, VISUAL, or DVD video
mode is suspended.

English

Owner’s manual

VRX935VD 75 VRX935VD 6 VRX935VD

Color LCD Display

•Radio mode : FM1 98.10MHz Pch 1(band/frequency/preset No.)

•DVD changer mode: D2 T02 C002 01:08:20

(disc No./title No./chapter No./ playback time)

•DVD video mode : T01 C003 00:08:20(title No./chapter No./playback time)

•Video CD mode : T01 00:01:18(track No./playback time)

•MP-3 mode : F001 T001 00:04:07(folderNo./track No./playback time)

•CD mode : TRACK 02 04 : 07(track No./playback time)

•CD/MD changer mode: D02 T02 00 : 45(disc No./track No./playback time)

•TV mode : TV1 28CH Pch 1(band/channel/preset No.)

•VISUAL mode : VISUAL 1 (band)

Mode name

•Radio/TV mode

•CD changer mode

•CD TEXT in CD changer mode

•MD changer mode

MOTION/SPRITE
pattern display

Clock time

: Seek/Manual indication

MANU

: Stereo indication

ST

: Loudness indication

LD

When the 5.1ch Surround Decoder (DVH920) is
connected, the program format of the digital input
signal (for example, “3/2+LFE”) is displayed.

: Beat-EQ indication

BEQ

When the 5.1ch Surround Decoder (DVH920) is
connected, the signal format of the digital input
signal (for example, “Dolby D”) is displayed.

: PROGRAM WEST COAST (user title)

: USER TITLE SHINE (user title)

: DISC TITLE SHINE (disc title)
: TRACK TITLE Time has come (track title)
: ARTIST Time has come (artist)

: DISC TITLE SHINE (disc title)
: TRACK TITLE Time has come (track title)

English

Owner’s manual

VRX935VD 9

English

∗2

∗5

∗4

∗5

FUNCTION

DVD PLAYER

∗1

∗3

OUTLINE OF BUTTON AND TOUCHKEY

6.

OPERATION WHEN THE DISPLAY IS OPEN

Owner’s manual

Note:

• The background of some screens in the following
sections have been simplified to make it easier to
see the keys in each procedure.

∗1: The STANDARD screen indication in the ra-

dio mode

∗2: Press an operation button to switch the STAN-

DARD screen.
The operation button is [FUNC] button in the
description of operation per mode.

∗3: Touch the screen and the menu screen corre-

sponding to the play mode is displayed.

∗4: Touch an operation key to switch the menu

screen.
The operation key is [FUNCTION] key in the
description of operation per mode.

∗5: Touch the [RTN] key to return to the previous

screen.

∗6: Touch the [ ] key to go to the next menu.

∗7: Touch the [ ] key to return to the previous

menu.

∗8: This icon [ ] is displayed to indicate that the

button should be held down for 1 second or
longer.

10 VRX935VD

English

Owner’s manual

(ADJUST MODE menu) (DVD SETUP menu)

∗8

1

∗6

∗7

CLOCK

STOP

∗6

PARENTAL LEVEL

VRX935VD 11

English

∗9

DETAIL

BASS BOOST

EQ LEVEL

9

8

1

ENT

0

Owner’s manual

(AUDIO MODE menu)

(KEY PAD)

12 VRX935VD

∗8

1

(MOTION/SPRITEmenu)

SPRITE

English

Owner’s manual

∗10

(DVD video menu)

∗11

WALL COLOR

Notes:

∗8: This icon [ ] is displayed to indicate that

the button should be held down for 1
second or longer.

∗9: This shows a KEY PAD selection example

in the radio mode when 98.10 MHz is
selected.

ENT

∗10: Use this button during DVD, video CD and

MP-3 playback.

∗11: When the KEY PAD is difficult to view,

press the touch key on the right (left) side
of the screen to move it to the other side of
the screen.

VRX935VD 13

English

7. REMOTE CONTROL

Remote control unit

Owner’s manual

[

]

BAND

[

]

FUNC

[

]

0-9

[

DISC SEL

[

[

[

[

]

RPT

[

SUB TITLE

],[ ]

[

RTN

SET UP

[

ENT

],[

[

SCAN

[

AUDIO

]

]

]

]

]
]

]

]

Signal transmitter

Operating range: 30˚ in all directions

[

]

CeNET

[

]

MUTE

[

VOLUME

[

P.TIME

[

[

[

MENU

[

TITLE

[

[

[

RDM

[

SLOW

[

ANGLE

]

]

]

]

[

SEARCH MODE

]

]

],[ ]

],[

]

]

]

]

[

PBC

]

]

Inserting the Batteries

1.Turn the remote control unit over, then slide the
rear cover in the direction of the arrow.

2.Insert the AA (SUM-3, IECR-6/1.5V) batteries
that came with the remote control unit facing in
the directions shown in the figure, then close the
rear cover.

Notes:

Using batteries improperly can cause them to
explode. Take note of the following points:

• When replacing batteries, replace both batteries
with new ones.

• Do not short-circuit, disassemble or heat batteries.

• Do not dispose of batteries into fire or flames.

• Dispose of spent batteries properly.

14 VRX935VD

AA (SUM-3, IECR-6/1.5V)
Batteries

Rear cover

Rear side

Functions of Remote Control Unit Buttons

English

● Shared modes

[FUNC] button

• Press and hold this button for 1 second or
longer to turn on or off the power. Power on/
off, switches among radio, TV, etc.

[VOLUME] button

• Increases and decreases volume.

[MUTE] button

• Turns mute on and off.

[CeNET] switch

• For operating this unit, switch this switch to
the CeNET position.

● Radio/TV mode

[BAND] button

• Switches reception band.

[0 - 9] button

• Use in the KEY PAD operation screen to set
the radio frequency and TV channels.

[DISC SEL] button

• Press to display the P.CH SELECT screen.

[SEARCH MODE] button

• Press to display the KEY PAD operation
screen.

[ENT] button

• Press to confirm numerics entered in the KEY
PAD operation screen.

[ ], [ ] buttons

• Press to select the next higher or lower preset
channel in radio and TV mode.

[A], [D] button

• Press to select the next higher or lower
frequency in radio and channel in TV mode.

[SCAN] button

• Press to perform preset scans in the radio and
TV modes.

• Hold down to perform the auto store operation
in the radio and TV modes.

• Press to return to the first track in CD/MP-3
mode or video CD mode with the PBC
function turned off.

[P.TIME] button

• Press to turn on and off the playtime display in
the DVD video and video CD mode.

• Press and hold this button for 1 second or
longer to switch the playback status display
contents.

[ß] button

• Press to stop video playback in DVD video
and video CD mode.

[s] button

• Press to play or pause video and audio
media.

[0 - 9] button

• Press to enter DVD video chapters in the KEY
PAD screen.

• Press to set the track number of the Video CD
with the PBC function turned off, CD track
number or MP-3 track number in the KEY
PAD screen.

[SEARCH MODE] button

• Press to display the KEY PAD operation
screen.

[RTN] button

• Press to switch the screen display while the
MENU screen is being displayed. However, it
may occur that this button operation dose not
work on some discs.

[MENU] button

• Press to display menu stored on video disc.

• MP3: Returns the cursor to the default
position and displays the files (track) select
screen.

[SET UP] button

• Press to display the menu for setting audio
features during DVD video playback.

• Press and hold this button for 1 second or
longer to show the DVD SETUP menu.

∗ If you want to select a menu after the SETUP

menu is displayed, touch the operation keys on
the menu screen.

Owner’s manual

● DVD player mode

[BAND] button

• Press to return to the first chapter in DVD
video mode.

[TITLE] button

• Press to display the title screen on DVD video
discs. Some discs do not display the title
screen.

VRX935VD 15

English

Functions of Remote Control Unit Buttons

[w], [z], [Å], [Î] button

• Press to select menus and other items during
DVD video/MP-3 playback.

Owner’s manual

[ENT] button

• Press to confirm numerics entered in the KEY
PAD operation screen.

[ ] [ ] buttons

• Press to select the next higher or lower
chapter number in DVD video mode.

• Press to select the next higher or lower track
numbers in CD/MP-3 mode or video CD mode
with the PBC function turned off.

[A] [D] button

• Hold down to perform fast-forward and fast­backward.

[SCAN] button

• Press to perform chapter scans in DVD video
mode and track scans in CD mode. Press to
perform track scan and hold down to perform
folder in MP-3 mode.

[RPT] button

• Press to perform chapter repeat in DVD video
mode and track repeat in CD mode. In the
MP-3 mode, press to perform track repeat and
hold down to perform folder repeat.

[RDM] button

• Press to play tracks at random in CD mode. In
the MP-3 mode, press to play tracks at random
and hold down to play folders at random.

[PBC] button

• Press to turn on and off the PBC function in
video CD mode.
If the button is pressed and held for 5 seconds
or longer, the DVD video player parameter
settings are returned to the factory default
settings.

[AUDIO] button

• Press to switch on the AUDIO function in DVD
video and video CD modes.

[SUB TITLE] button

• Press to display subtitles in DVD video mode.

[ANGLE] button

• Press to turn the ANGLE function on and off in
DVD video mode. (This button is available
only on multiple angles DVDs.)

[SLOW] button

• Press to perform slow playback in DVD video
or video CD mode.

● CD/MD changer mode

[BAND] button

• Press to switch discs.

[DISC SEL] button

• Used to change the disc.

[s] button

• Press to play and pause the media.

[0 - 9] buttons

• Press to enter track numbers in the KEY PAD
screen.

[SEARCH MODE] button

• Press to display the KEY PAD operation
screen.

[ ] [ ] buttons

• Press to select the next higher or lower
playback track.

[A] [D] button

• Hold down to perform fast-forward and fast­backward.

[SCAN] button

• Press to perform track scan and hold down to
perform disc scan.

[RPT] button

• Press to perform track repeat and hold down
to perform disc repeat.

[RDM] button

• Press to play tracks at random and hold down
to play folders at random.

● DVD changer mode

[BAND] button

• Press to switch discs.

[DISC SEL] button

• Used to change the disc.

∗

Other button operations in this mode are
the same as those in DVD player mode.

16 VRX935VD

8. DCP

English

The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.

We recommend taking the DCP with you when
leaving the car.

Removing the DCP

1. Turn the power off.

2. Slide the [RELEASE] lever leftward to
release the DCP/Operation Panel.

DCP

3. Pull the DCP toward you and remove it.

DCP

Attaching the DCP

1. Insert the DCP so that the A section on the
left side of the DCP catches on the hook B
on the unit.

2. Press the right side of the DCP carefully to fit
it in place.

DCP

3. Press the [FUNC] button to turn on the
power.

CAUTION

• The DCP can easily be damaged by shocks.

After removing it, be careful not to drop it or
subject it to strong shocks.

• If the Operation Panel is kept open, the DCP

may drop due to vibration of the car. This
results in damage to the DCP. So close the
Operation Panel or remove the DCP to store
into the case.

• The DCP is an extremely important part. Be

careful not to damage it by pressing on it with
fingernails, screwdrivers, etc.

• In case the Control Panel is kept open

When you detach the DCP, the panel is to be
stored automatically after a warning sound.

When you attach the DCP, the panel is to
come out to its original position after a
warning sound.

Note:

• If the DCP is dirty, wipe off the dirt with a soft, dry

cloth only.

Owner’s manual

B

A

DCP

VRX935VD 17

English

9. CAUTIONS ON HANDLING

LCD panel/Generalities

Owner’s manual

For a longer service life, be sure to read the following cautions.

• Be sure to store the LCD panel inside the
main unit when parking the car outdoors for
long period of time. The LCD panel will
operate properly in a temperature range of 0
to 60˚C.

• Don’t allow any liquids on the set from drinks,
umbrellas etc. Doing so may damage the
internal circuitry.

• Do not disassemble or modify the set in any
way. Doing so may result in damage.

• Do not draw the LCD panel out and use it as a
tray. Also, subjecting the LCD panel to shocks
may result in breakage, deformation or other
damage.

• Do not let cigarettes burn the display. Doing
so may damage or deform the cabinet.

• If a problem should occur, have the set
inspected at your store of purchase.

• Do not insert objects or poke in the space
between the LCD panel and the main unit
when the panel is tilted.

Cleaning

• Cleaning the cabinet

Use a soft, dry cloth and gently wipe off the
dirt. For tough dirt, apply some neutral
detergent diluted in water to a soft cloth, wipe
off the dirt gently, then wipe again with a dry
cloth.

• Do not place anything on the display when the
panel is tilted.

• The remote controller may not work if the
remote control sensor is exposed to direct
sunlight.

• In extremely cold weather, the display
movement may slow down and the display
may darken, but this is not a malfunction. The
display will work normally when the
temperature increases.

• Small black and shiny spots inside the LCD
panel are normal for LCD products.

• The LCD panel may stop temporarily when it
opens or closes, when the engine stops or
when it is cold.

• The touchkeys on the display operate when
slightly touched. Do not press the touchkey
screen with much force.

• Do not push the case surrounding the
touchkey panel with much force. This may
cause malfunctioning of the touchkeys.

• Cleaning the LCD panel

The LCD panel tends to collect dust, so wipe
it off occasionally with a soft cloth. The
surface is easily scratched, so do not rub it
with hard objects.

Do not use benzene, thinner, car cleaner, etc.,
as these substances may damage the cabinet
or cause the paint to peel. Also, leaving
rubber or plastic products in contact with the
cabinet for long periods of time may cause
stains.

18 VRX935VD

10. DVD VIDEO SYSTEM

English

DVD video is a high-quality digital video source
that provides crisp and clear images. One 12
cm disc contains either one film or four hours of
music.

DVD Video Features

This unit provides the following functions in
addition to the high image quality and sound
quality of DVD video.

Notes:

• The functions described in the section,
“Features”, for example, the recorded language,

subtitles, angles, etc. differ with the DVD video
disc. Refer to the instructions provided with the
DVD video.

• Some disc functions may operate differently than
described in this manual.

Multi-sound function

DVD video can store up to 8 languages for one
film; select the language of your preference.

• The languages stored on the disc are

indicated by the icon shown below.

Multi-angle function

A DVD video that is filmed from multiple angles
allows you to select the angle of choice.

• The number of recorded angles are indicated

by the icon shown below.

Multi-story function

When a DVD video contains more than one
story for a film, you can select the story you
wish to enjoy. The operation procedures vary
with the disc; observe the instructions for
selecting a story provided during playback.

Dolby digital

Dolby digital enables up to 5.1 independent
multi-channel audio reproduction, the same type
of surround system that is also used in movie
theaters.

DTS

DTS (Digital Theater System) is a digital sound
compression technique developed by Digital
Theater Systems, Inc.

This low sound compression format delivers a
large amount of data and makes it possible to
reproduce a high quality sound.

Menu screens

Menus can be called up during DVD video
playback to perform menu setting.

• Example showing menu display

Owner’s manual

Subpicture (subtitles) function

A DVD video can record subtitles for up to 32
languages and you can select the language of
the subtitles you wish to see.

• The number of recorded subtitle languages

are indicated by the icon shown below.

VRX935VD 19

English

Discs

Playable discs

This DVD video player can play the following
discs.

Owner’s manual

Playable discs

DVD video discs

Audio CDs

video CDs CD TEXT

About CD Extra discs

A CD Extra disc is a disc in which a total of two
sessions have been recorded. The first session
is Audio session and the sedond session Data
sessioin.

Your personally-created CDs with more than 2
data sessions recorded cannot be played on
this DVD video player.

Discs that cannot be played back

This DVD video player cannot play back DVD-R,
DVD-RAM, DVD-ROM, CD-ROM, Photo CDs.

• Some CDs recorded in CD-R or CD-RW mode

may not be usable. (Cause: disc
characteristics, cracks, dust/dirt, dust/dirt on
player’s lens, etc.)

TV color system

This DVD player plays NTSC discs and PAL
discs only and cannot be used for playback of
SECAM discs.

About MP3 playback

This unit can play back CD-R/CD-RW discs on
which MP3 music data have been recorded.

For a detailed information, see the page entitled

“Listening to an MP3”.

About the registered marks etc.

• This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection tecnology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse
engineering or disassembly is prohibited.

• Manufactured under license from Dolby
Laboratories.

“Dolby” and the duble-D symbol are
trademarks of Dolby Laboratories.

•“DTS” is a registered trademark of Digital
Theater Systems, Inc.

Note on region numbers

The DVD video system assigns a region number
to DVD video players and DVD discs by sales
area.

The DVD video region number is marked on the
disc jacket as shown below.

(Oceania)

3

ALL

(Asia)

ALL

4

3

4

6

3

4

6

20 VRX935VD

11. OPERATIONS

Note: Be sure to read this chapter referring to the front diagrams of

Basic Operations

CAUTION

When the unit is turned on, starting and
stopping the engine with its volume raised to
the maximum level may harm your hearings.
Be careful about adjusting the volume.

Note:

• Use this unit after starting the engine.

ACC or engine
ON position

Turning on and off the power

Note:

• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.

1. Press the [FUNC] button.

2. The illumination and display on the unit light

up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.

3. Press and hold the [FUNC] button for 1

second or longer to turn off the power for the
unit.

Note:

• About the “SYSTEM CHECK”
The confirmation of connected equipment must

be performed for this unit only when the wiring
connection is complete and power is turned on to
the unit first. When the power is supplied, “PUSH
PWR” appear in the display. Press the [FUNC]
button, the system check starts inside the unit.
When “COMPLETE” and “PUSH PWR” appear
alternately, press once again the [FUNC] button.

Selecting a mode

1. Press the [FUNC] button to change the mode

of operation.

2. Each time you press the [FUNC] button, the

mode of operation changes in the following
order:

Radio mode ➜ DVD mode ➜ CD changer
mode ➜ MD changer mode ➜ DVD changer
mode ➜ TV mode ➜ VISUAL mode ➜ Radio
mode...

∗ External equipment not connected with

CeNET is not selected.

chapter “3. CONTROLS” on page 5 (unfold).

English

Owner’s manual

Adjusting the volume

1. Operate the [VOL] button in the direction of
the + (up) or – (down) to adjust the volume;

+ : Increases the volume.
– : Decreases the volume.

∗ The volume level indicated in the display is in a

range from 0 (minimum) to 33 (maximum).

CAUTION

While driving, keep the volume at a level at
which external sounds can be heard.

Switching the display

When the panel is closed:

1. Press the [DISP] button to select the desired
display.

Each time you press the [DISP] button, the
display switches in the following order:

MAIN Display

SUB Display

Clock Time Display

MAIN Display

Notes:

• Once selected, the preferred display becomes the

default display. When a function adjustment such
as volume is made, the display momentarily
switches to that function’s display, then returns
back to the preferred display several seconds
after the adjustment.

• If a title has been input, it is shown in the SUB

display. If no title has been input, “NO TITLE”
appears in the display. To input a title, refer to the
subsection “Entering titles” in “Other Functions”
section.

• For CD, MD and TV, some special characters of

the title will not be displayed on the Information
Panel of the DCP. In this case, those characters
will only be left blank.

VRX935VD 21

English

Basic Operations

Opening and turning the display

WARNING

Owner’s manual

• To prevent the battery from going dead,
operate this unit with the engine
running, if possible.

• When the liquid crystal panel is operating,
be careful not to get your hand or finger
caught between the panel and main unit
or the instrument panel of the car.

Standing up the liquid crystal panel

1. Press the [OPEN] button and the liquid
crystal panel comes out and stand up
automatically.

∗ While the liquid crystal panel is opening or

closing, the LED of the [FUNC] button blinks.

Note:

• If the liquid crystal panel stops in the middle of its

operation, press the [OPEN] button to house the
panel and press the button again to stand it up.
The unit enters the same display mode as the
display was turned off the last time.

Adjusting the angel, etc. of the
liquid crystal panel

The angle of the liquid crystal panel or
protruding amount of the panel from the
mounting surface can be adjusted depending on
the mounting angle of the unit or light coming
into the car.

●

To adjust the angle

1. Every time the [TILT] button is pressed, the
liquid crystal panel tilts forward or backward
at up to about 20 degrees. The adjusted
angel is stored in memory.

20˚

20˚

Note:

• Do not move the liquid crystal panel by hand.

●

To adjust the slide position

1. Press and hold the [TILT] button and release
when a beep is heard.

The liquid crystal panel slides forward or
backward. The adjusted slide position is
stored in memory.

* There are 3 adjustable positions available on

this panel.

22 VRX935VD

Housing the liquid crystal panel

1. Press the [OPEN] button and the liquid
crystal panel is housed automatically.

Note:

• When leaving this unit unused for a long period of

time or leaving your car, be sure to house the
liquid crystal panel into the main unit.

Basic Operations

English

Turning the liquid crystal panel
horizontal (Air conditioner
operation mode)

When the way the liquid crystal panel is
mounted hinders the operation of the air
conditioner, the position of the panel can be
turned horizontal temporarily.

1. Press and hold the [OPEN] button when the
liquid crystal panel is upright, and release the
button when a beep is heard.

2. The liquid crystal panel turns horizontal.

∗ Press the [OPEN] button again when the

liquid crystal panel is in the horizontal position,
and the panel returns to the original position.

∗ Even if the button is not operated for about 10

seconds, the panel returns to the original
position with a warning sound.

Turning on and off the monitor

1. Pressing and holding the [M.L] button for 1
second or longer turns the monitor off. To
return to the monitor on, press the [M.L]
button once again.

∗ When a button is pressed or during security

monitoring, the monitor-off mode is canceled.

Mute

1. Each time you press the [MUTE] button,
mute is turned on and off. “MUTE” appears
when mute is turned on.

Setting the Beat EQ

• This function is enabled only when the panel is

open.

This unit comes with 3 types of sound tone
effect stored in memory. Select the one you
prefer.

∗ The factory default setting is “USER CUSTOM”.

1. Press the [A-M] button to change into the
AUDIO MODE menu.

2.

When the AUDIO MODE menu is displayed,
touch the key for the desirable type to select it.

• BASS BOOST : bass emphasized

• IMPACT : bass and treble

• EXCITE : bass and treble

• USER CUSTOM : user custom

• TONE BYPASS : no sound effect (Beat EQ

emphasized

emphasized mid de­emphasized

off)

3. When the setting is finished, touch the [RTN]
key or press the [A-M] button to return to the
previous mode.

When the Beat EQ (BASS BOOST, IMPACT,
EXCITE, USER CUSTOM) is set, “B.EQ”
appears in the display.

Note:

• When the separately-sold 5.1ch Surround

Decoder (DVH920) is used, the bass and treble
tone adjustments cannot be made. To adjust the
tone, refer to the section “5.1ch Surround

Decoder Operations”.

Adjusting the non fader output
volume

You can adjust the volume output from the unit’s
non fader output terminal.

1. Press the [A-M] button, then touch the
[DETAIL] key.

2. Touch the [NON-FAD VOL] key.

3. Touch the [w] or [z] key to adjust to
desirable level.

∗ The factory default setting is “0”. (Setting

range: –6 to 6)

4. When the adjustment is complete, touch the
[RTN] or press the [A-M] button to return to
the previous mode.

Adjusting the bass

The bass gain, bass frequency (center
frequency) and bass Q can be adjusted as
follows.

1. Press the [A-M] button, then touch the
[USER CUSTOM] key.

2. Touch the [DETAIL] key, then touch the
[BASS] key.

3. When the bass type selection screen is
displayed, touch the key for the desirable
type to select it.

4. Touch the [w] or [z] key to adjust to
desirable level.

GAIN : –6 to 8 (The factory default setting

is “0”)

FREQ. : 50Hz/80Hz/120Hz (The factory

default setting is “50”)

Q : 1/1.25/1.5/2 (The factory default

setting is “1”)

5. When the adjustment is complete, touch the
[RTN] key several times or press the [A-M]
button to return to the previous mode.

VRX935VD 23

Owner’s manual

English

Basic Operations

Adjusting the MID

The MID gain, MID frequency (center
frequency) and MID Q can be adjusted as

Owner’s manual

follows.

1. Press the [A-M] button, then touch the
[USER CUSTOM] key.

2. Touch the [DETAIL] key, then touch the
[MID] key.

3. When the bass type selection screen is
displayed, touch the key for the desirable
type to select it.

4. Touch the [w] or [z] key to adjust to
desirable level.

GAIN : –6 to 6 (The factory default setting

FREQ. : 700Hz/1kHz/2kHz (The factory

Q : 1.5/2 (The factory default setting is

5. When the adjustment is complete, touch the
[RTN] key several times or press the [A-M]
button to return to the previous mode.

is “0”)

default setting is “1k”)

“2”)

Adjusting the TREBLE

The treble gain and treble frequency (center
frequency) can be adjusted as follows.

1. Press the [A-M] button, then touch the
[USER CUSTOM] key.

2. Touch the [DETAIL] key, then touch the
[TREBLE] key.

3. When the bass type selection screen is
displayed, touch the key for the desirable
type to select it.

4. Touch the [w] or [z] key to adjust to
desirable level.

GAIN : –6 to 6 (The factory default setting

FREQ. : 8kHz/12kHz (The Factory default

5. When the adjustment is complete, touch the
[RTN] key several times or press the [A-M]
button to return to the previous mode.

is “0”)

setting is “12K”)

Adjusting the balance/fader

1. Press the [A-M] button, then touch the
[DETAIL] key.

2. Touch the [BAL/FAD] key.

3. Touch the [w] or [z] key to adjust to the
fader level.

∗ The factory default setting is “0”. (Adjustment

range: front 13 to rear 13)

[w] key: Emphasized the sound from the

[z] key: Emphasized the sound from the

4. Touch the [Å] or [Î] key to adjust to the

balance level.

∗ The factory default setting is “0”. (Adjustment

[Å] key : Emphasized the sound from the left

[Î] key : Emphasized the sound from the

5. When the adjustment is complete, touch the
[RTN] key several times or press the [A-M]
button to return to the previous mode.

front speakers.

rear speakers.

range: left 12 to right 12)

speakers.

right speakers.

Adjusting the Beat EQ

1. Press the [A-M] button and select “BASS
BOOST or IMPACT or EXCITE”.

2. Touch the [DETAIL] or [LEVEL] key to
display the level adjustment screen.

3. Touch the [w] or [z] key to adjust to
desirable level.

∗ When BASS BOOST is selected, you can

adjust the bass in the range of –3 to 3.

∗

When IMPACT and EXCITE is selected, you
can adjust the bass and treble in the range of –
3 to 3.

4. When the adjustment is complete, touch the
[RTN] key several times or press the [A-M]
button to return to the previous mode.

Turning on/off the loudness

The loudness effect emphasizes the bass to
create a natural sound tone. When you are
listening to music at a low volume, it is
recommended to use the loudness effect.

1. Press and hold the [A-M] button for 1 second
or longer to turn on the loudness effect.
When the loudness effect is turned on, “LD”
lights in the display.

2. Press and hold the [A-M] button for 1 second
or longer to turn off the loudness effect. “LD”
goes off in the display.

24 VRX935VD

Basic Operations

Radio Operations

English

Changing the setting of the display
background

WARNING

Perform the setting of this function only
when the car is stopped and the parking
brake is applied.

1. Press the [DISP] button for 1 second or
longer to show the background setup menu.

∗ This menu appears only during Radio and

DVD (with CD, MP3), CD/MD changer mode,
and when the car is moving.

2. Touch the setting key to show the setup
display.

● To set up the motion pattern

2-1. Touch the [MOTION] key to set a

desired motion pattern.

2-2. Touch a desired MOTION PATTERN.

● To set up the sprite pattern

2-1. Touch the [SPRITE] key to set a desired

sprite pattern.

2-2. Touch a desired SPRITE PATTERN.

● To set up the wall color

2-1. Touch the [WALL COLOR] key to set a

desired wall color.

2-2. Touch a desired WALL COLOR.

3. Press the [DISP] button again or touch the
[RTN] key to return to the STANDARD
screen.

FM reception

For enhanced FM performance the
tuner includes signal actuated stereo control,
Enhanced Multi AGC, Impulse noise reduction
curcuits and Multipath noise reduction circuits.

Changing the reception area

This unit is initially set to USA frequency
intervals of 10kHz for AM and 200kHz for FM.
When using it outside the USA, the frequency
reception range can be switched to the intervals
of 9 kHz for AM and 50 kHz for FM.

● Setting the reception area

1. While pressing [DISP] button, each time you
press and hold the number “6” of the
[DIRECT] buttons for 2 seconds or longer,
the reception area switches from inside the
USA to outside the USA or from outside the
USA to inside the USA.

∗ Any station preset memories are lost when the

reception area is changed.

Listening to the radio

1. Press the [FUNC] button and select the
RADIO mode. The frequency is displayed.

2. Press the [BND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the
following order:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

3. Press the [a] or [d] button to tune in the
desired station.

∗ When the panel is open, the same operation

is also available by using the [a] or [d]
button in the panel.

®

Owner’s manual

VRX935VD 25

English

Radio Operations

Seek tuning

1. Press the [BND] button and select the
desired band. (FM or AM)

Owner’s manual

2. Tune in to a station.

∗ If “MANU” is lit in the display press and hold

the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek
tuning is now available.

3. Press the [a] or [d] button to
automatically seek a station.

When the [d] button is pressed, the station
is sought in the direction of higher
frequencies; when the [a] button is
pressed, the station is sought in the direction
of lower frequencies.

∗ When the panel is open, the same operation

is also available by using the [a] or [d]
button in the panel.

Selecting stations with the KEY PAD

∗ This function displays the KEY PAD on the screen

enabling you to tune in through auto store, preset
scan or by entering a frequency.

Press the [KEY PAD] button to display the KEY
PAD.

● Tuning in by selecting a frequency

1. Touch the [SRCH] key to switch the KEY
PAD.

2. Touch the [0]~[9] key corresponding with the
frequency you desired. When you touch the
wrong number ([0]~[9] key), you can cancel
that to touch the [DEL] key.

3. Touch the [ENT] key. The radio station you
required would be tuned.

● To use auto store,

touch the [AS] key for about 2 seconds.

● To perform a preset scan,

touch the [PS] key.

● To cancel the KEY PAD display,

press the [KEY PAD] button or touch the [OFF]
key.

Manual tuning

There are 2 ways available: Quick tuning and
step tuning.

When you are in the step tuning mode, the
frequency changes one step at a time. In quick
tuning mode, you can quickly tune the desired
frequency.

1. Press the [BND] button and select the
desired band. (FM or AM)

∗ If “MANU” is not lit in the display, press and

hold the [BND] button for 1 second or longer.
“MANU” appears in the display and manual
tuning is now available.

2. Tune into a station.

● Quick tuning:

Press and hold the [a] or [d] button for 1
second or longer to tune in a station.

● Step tuning:

Press the [a] or [d] button to manually
tune in a station.

Recalling a preset station

A total of 24 preset positions (6-FM1, 6-FM2, 6­FM3, 6-AM) exists to store individual radio
stations in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio
frequency automatically.

There are 2 ways available to recall the preset
station.

● Using the [DIRECT] buton.

1. Press the [BND] button and select the
desired band. (FM or AM)

2. Press the corresponding [DIRECT] button to
recall the stored station.

∗ Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store that station
into preset memory.

● Using the [DIRECT] key.

1. Press the [LIST] button or touch the screen
when the STANDARD screen is displayed,
then touch the [P.CH SELECT] key.

2. Touch the corresponding [DIRECT] key to
recall the stored station.

∗ You can select the desired band to touch the

[BAND] key.

3. Touch the [RTN] key or press the [LIST]
button to return to the previous mode.

26 VRX935VD

Radio Operations

English

Manual memory

1. Press the [BND] button and select the
desired band. (FM or AM)

2. Select the desired station with seek tuning,
manual tuning, or preset tuning.

3. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.

Auto store

Auto store is a function for storing up to 6
stations that are automatically tuned in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.

1. Press the [BND] button and select the
desired band. (FM or AM)

2. Touch the screen switching touchkey when
the STANDARD screen is showing or press
the [LIST] button, the MENU screen
appears.

3. Touch the [SUB MODE] key in the MENU
screen and the [AUTO STORE] key appears
in the display.

4. Touch and hold the [AUTO STORE] key for 2
seconds or longer.

The stations with good reception are stored
automatically to the preset channels.

Instant station recall (ISR)

Instant station recall is a special radio preset
that instantly accesses a favorite radio station at
a touch of a button. The ISR function even
operates with the unit in other modes.

● ISR memory

1. Select the station that you wish to store in
ISR memory.

2. Press and hold [ISR] button for 2 seconds or
longer.

● Recalling a station with ISR

1. In any mode, press [ISR] button to turn on
the radio function and tune the selected radio
station. “ISR” appears in the display. Press
[ISR] button again to return to the previous
mode.

Owner’s manual

Preset scan

Preset scan receives the stations stored in
preset memory in order. This function is useful
when searching for desired station in memory.

1. Touch the screen switching touchkey when
the STANDARD screen is showing or press
the [LIST] button, the STANDARD screen
appears.

2. Touch the [SUB MODE] key in the MENU
screen and the [PRESET SCAN] key
appears in the display.

3. Touch the [PRESET SCAN] key to start
preset scan. The unit starts scanning each
station for 7 seconds sequentially.

4. When the desired station is turned in, touch
the [PRESET SCAN] key again to continue
receiving that station.

VRX935VD 27

English

DVD Video Player Operations

Changing DVD system settings

Notes:

Owner’s manual

• If the SETUP operation is performed in the middle

of video CD/DVD video play, the disc plays from
the beginning.

• Various settings of the SETUP menu cannot be

made with the remote control unit.

Selecting the DVD SETUP menu

1. Press and hold the [ADJ] button for 1 second
or longer. DVD SETUP stand-by screen is
displayed.

2. Press the [STOP] key to display the DVD
SETUP menu.

3. Touch the [ ] key. Touch the [ ] key to
return to the previus menu.

● When watching through a conventional
type of the rear view monitor (4:3)

• N PS : The leftmost and rightmost areas of

the screen are cut off.

This function allows displaying the important
part of image fully on the screen. In some
cases, image is displayed while being
panned (scrolled).

• N LB : A black zone is created in the top and

bottom areas of the screen.

This method displays Cinema Scope and
Vista Vision images without cutting them off
by creating a black zone on the top and
bottom gaps.

● When watching through a wide type of the
rear view monitor (16:9)

• WIDE:

4. Touch the [RTN] key to return the previous

mode.

Setting up the screen size

Set up the screen size according to the rear
view monitor which is connected to this unit.

1. Following the steps 1 to 2 in “Selecting the

DVD SETUP menu”, touch the [TV
DISPLAY] key.

2. Touch the [N PS], [N LB] or [WIDE] key to

select a desired size to set it.

∗ The factory default setting is “N PS”.

The color of the selected item changes.

28 VRX935VD

3. Touch the [RTN] key to return previous

mode.

Setting up the angle mark display

You can set up so that the angle mark appears
on scenes where the angles can be switched.

1. Following the steps 1 to 2 in “Selecting the

DVD SETUP menu”, touch the [ANGLE] key.

2. Touch the [ON] or [OFF] key to select “ON”

or “OFF”.

∗ The factory default setting is “OFF”.

3. Touch the [RTN] key to return previous

mode.

Setting up the disc menu language.

1. Following the steps 1 to 2 in “Selecting the

DVD SETUP menu”, touch the [MENU
LANGUAGE] key.

DVD Video Player Operations

English

2. Touch the key to select a desired language
to set it.

∗ The factory default setting is “ENGLISH”.

3. Touch the [RTN] key to return previous
mode.

Setting up the audio language

1. Following the steps 1 to 2 in “Selecting the
DVD SETUP menu”, touch the [AUDIO
LANGUAGE] key.

2. Touch the key to select a desired language
to set it.

∗ The factory default setting is “ENGLISH”.

3. Touch the [RTN] key to return previous
mode.

Setting up the subtitle language

1. Following the steps 1 to 2 in “Selecting the
DVD SETUP menu”, touch the [SUB TITLE
LANG.] key.

2. Touch the key to select a desired language
to set it.

∗ The factory default setting is “OFF”.

3. Touch the [RTN] key to return previous
mode.

Setting up the password for setting
up of the parental level

1. Following the steps 1 to 2 in “Selecting the
DVD SETUP menu”, touch the

[PASSWORD] (password) key.

2. Touch the ten-key(0 to 9) to input a 4-digit
password.

∗ The factory default setting is “0000”.
2-1. Input an old password, and touch the

[ENT] key.

2-2. Input a new password, and touch the

[ENT] key.

2-3. Input a new password again, and touch the

[ENT] key.

3. Touch the [RTN] key to return previous
mode.

Note:

When a disc with view limited is played
When a disc with view limited is played, the input

screen requiring you to input the password may
appear. When this happens, enter the correct
password, otherwise play does not start.

Setting up the country code

Set up the country number for setting up of the
parental level.

1. Following the steps 1 to 3 in “Selecting the

DVD SETUP menu”, touch the [PARENTAL
LOCALE] key.

2. Touch the ten-key(0 to 9) to input a 4-digit
country code.

∗ The factory default setting is “8583”(U.S.A).

■ Country code list

Country

Region number 3

BRUNEI DARUSSALAM
Kingdom of Cambodia
INDONESIA
KOREA, DEMOCRATIC PEOPLE’S REPUBLIC OF
KOREA,REPUBLIC OF
LAO PEOPLE’S DEMOCRATIC REPUBLIC
MALAYSIA
MYANMAR
PHILIPPINES
SINGAPORE

THAILAND
VIET NAM
EAST TIMOR
HONG KONG
MACAU
TAIWAN, PROVINCE OF CHINA

Region number 4

ANTIGUA AND BARBUDA
ARGENTINA
AUSTRALIA
BAHAMAS
BARBADOS
BELIZE
BOLIVIA
BRAZIL
CHILE
COLOMBIA

COSTA RICA
CUBA
DOMINICA
DOMINICAN REPUBLIC
ECUADOR
EL SALVADOR
FIJI
GRENADA
GUATEMALA
GUYANA

HAITI
HONDURAS
JAMAICA
KIRIBATI
MARSHALL ISLANDS
MEXICO
MICRONESIA, FEDERATED STATES OF
NAURU

Input code

6678
7572
7368
7580
7582
7665
7789
7777
8072
8371

8472
8678
8480
7275
7779
8487

6571
6582
6585
6683
6666
6690
6679
6682
6776
6779

6782
6785
6877
6879
6967
8386
7074
7168
7184
7189

7284
7278
7477
7573
7772
7788
7077
7882

Owner’s manual

VRX935VD 29

English

DVD Video Player Operations

Country Input code

NEW ZEALAND
NICARAGUA

Owner’s manual

PALAU
PANAMA
PAPUA NEW GUINEA
PARAGUAY
PERU
SAINT KITTS AND NEVIS
SAINT LUCIA
SAINT VINCENT AND THE GRENADINES
SAMOA
SOLOMON ISLANDS

SURINAME
TONGA
TRINIDAD AND TOBAGO
TUVALU
URUGUAY
VANUATU
VENEZUELA
ANGUILLA
ARUBA
VIRGIN ISLANDS (BRITISH)

CAYMAN ISLAND
CHRISTMAS ISLAND
COCOS (KEELING) ISLANDS
COOK ISLANDS
FALKLAND ISLANDS (MALVINAS)
FRENCH GUIANA
FRENCH POLYNESIA
GUADELOUPE
GUAM
MARTINIQUE

MONTSERRAT
NETHERLANDS ANTILLES
NEW CALEDONIA
NIUE
NORFOLK ISLAND
NORTHERN MARIANA ISLANDS
PITCAIRN
TOKELAU
TURKS AND CAICOS ISLANDS
WALLIS AND FUTUNA ISLANDS

3. Touch the [ENT] key.

4. Touch the [RTN] key to return previous

mode.

7890
7873

8087
8065
8071
8089
8069
7578
7667
8667
8783
8366

8382
8479
8484
8486
8589
8689
8669
6573
6587
8671

7589
6789
6767
6775
7075
7170
8070
7180
7185
7781

7783
6578
7867
7885
7870
7780
8078
8475
8467
8770

Setting up the parental level

You can change the level of parental lock
(audio-visual restriction).

This function allows cutting scenes that are
unfavorable for children or replacing them
automatically with other scenes prepared in
advance. For example, by replacing scenes of
radical violence or portrayals of sex with safe
scenes, you can make a trouble-free story as if
it were so from the beginning.

1. Following the steps 1 to 3 in “Selecting the

DVD SETUP menu”, touch the [PARENTAL
LEVEL] key.

2. When you touch the [w] or [z] key,
PASSWORD input screen is displayed.

3. Touch the ten-key(0 to 9) to input a 4-digit
password, and touch the [ENT] key.

∗ The factory default setting of the password is

“0000”.

4. Touch the [w] or [z] key to select level 1 to
8, or 0 (no parental).

∗ The factory default setting is “8”.

The relationship between DVD video category
codes and parental level are shown in the table
below. Use this table when setting the parental
level.

LEVEL7

LEVEL6

LEVEL4

LEVEL3

LEVEL1

• The contents that the parental level

NC-17
(NO ONE 17 AND UNDER ADMITTED)

R
(RESTRICTED)

PG-13
(PARENTS STRONGLY CAUTIONED)

PG
(PARENTAL GUIDANCE SUGGESTED)

G
(GENERAL AUDIENCES)

restricts varies with the country code.

30 VRX935VD

DVD Video Player Operations

English

Basic Operations

Loading a disc

Insert a disc into the centre of the insertion slot
with the label side facing up. The disc plays
automatically after loading.

Notes:

• Never insert foreign objects into the disc insertion
slot.

• If the disc is not inserted easily, there may be
another disc in the mechanism or the unit may
require service.

Loading 8 cm discs

∗ No adapter is required to play an 8 cm disc.
∗ Insert the 8 cm disc into the centre of the insertion

slot.

CAUTION

With the screen open, a driver may not see the
disc insertion slot. For your safety, insert a disc
with the screen closed.

Watching/Listening to a disc
already inserted

1. Press the [FUNC] button to select the DVD

mode. Play starts automatically. If no disc is
loaded in the unit, “NO DISC” appears in the
display.

WARNING

• Videos may be played back with

particularly loud sound. Increase the
volume gradually from the minimum
after the video images are displayed.

• For your safety, the driver should not

watch the video or operate the controls
while driving. Please note that watching
and operating the video while driving
are prohibited by law in some countries.

Note:

• For your safety, the VRX935VD has a safety
function which turns off the picture when the car
is moving, so only the audio can be heard. The
picture can only be watched when the car is
stopped and the parking break is applied.

Pausing play

1. Press the [s] button to pause play.

“PAUSE” appears in the display.

2. To resume disc play, press the [s] button

again.

Ejecting a disc

1. Press the [Q] button a disc ejects. “EJECT”

appears in the display.

∗ If a disc (12 cm) is left in the ejected position

for 15 seconds, the disc is automatically
reloaded. (Auto reload)

∗ 8 cm discs are not auto reloaded. Be sure to

remove it when ejected.

Note:

• If you force a disc into before auto reloading, this
can damage the disc.

Show the menu screen

1. Touch the screen to show the menu screen

while the main screen is being shown.

∗ To return to the main screen from the menu

screen, touch the [RTN] key.

KEY PAD operation

1. Press the [KEY PAD] button.

Each time the button is pressed, the KEY PAD
changes as follows.

° In DVD video mode

Cross KEY PAD(Å, Î, w, z)

Ten KEY PAD(0 - 9)

Sub KEY PAD
(selection keys such as P.TIME)

KEY PAD OFF

° In video CD mode

Ten KEY PAD(0 - 9)

Cross KEY PAD(Å, Î, w, z)

Sub KEY PAD
(selection keys such as P.TIME)

Owner’s manual

KEY PAD OFF

Notes:

∗

The KEY PAD displayed in the DVD video mode
always starts from the “Cross KEY PAD” when
the mode is engaged.

VRX935VD 31

English

DVD Video Player Operations

∗

The KEY PAD displayed in the video CD mode
always starts from the “Ten KEY PAD” when the
mode is engaged.

∗

Use either the “Cross KEY PAD” or the “Ten

Owner’s manual

KEY PAD” according to the disc contents menu
displayed in DVD video/video CD mode.

∗

Only the sub KEY PAD is displayed while you are
driving a car.

∗

The KEY PAD is not displayed in the menu
screen while you are driving a car.

Sub KEY PAD operation

● Enter the title number or some other
information to select directly

1. Touch the [SRCH] key to switch the KEY

PAD.

2. Touch the [0]-[9] key that corresponds to the

title number you desired. When you touch
the wrong number ([0]-[9] key), you can
cancel the key input by touching the [DEL]
key.

• DVD video mode: select the title number.

• Video CD mode (with the PBC function

turned off): select the track number.

• CD mode: select the track number.

• MP3 mode: select the file (track) number.

3. Touch the [ENT] key.

The specified title number is selected and
playback starts.

● Function of the other keys

• In DVD video mode

To turn on/off the play time indication, touch
the [P.TIME] key.

To switch the playtime, touch the [P.TIME] key
for 1 second or longer.

To perform title repeat, touch the [T.RPT] key.
To perform chapter repeat, touch the [C.RPT] key.
To perform chapter scan, touch the [C.SCN] key.
To switch the subtitles, touch the [SUBTTL] key.
To switch the language, touch the [AUDIO] key.

To switch the angle function, touch the
[ANGLE] key.

• In video CD mode:

To turn on/off the play time indication, touch
the [P.TIME] key.

To switch the playtime, touch the [P.TIME] key
for 1 second or longer.

To perform track repeat, touch the [T.RPT] key.
To perform track scan, touch the [T.SCN] key.
To perform track random, touch the [T.RDM] key.
To turn on/off Play Back Control function,

touch the [PBC] key.
To switch the language, touch the [AUDIO]

key.

• In CD mode:

To switch the playtime, touch the [P.TIME] key
for 1 second or longer

To perform track repeat, touch the [T.RPT] key.
To perform track scan, touch the [T.SCN] key.
To perform track random, touch the [T.RDM]

key.

• In MP-3 mode:

To switch the playtime, touch the [P.TIME] key
for 1 second or longer.

To perform folder repeat, touch the [F.RPT]
key.

To perform folder scan, touch the [F.SCN] key.
To perform folder random, touch the [F.RDM] key.
To perform file (track) repeat, touch the

[T.RPT] key.
To perform file (track) scan, touch the [T.SCN] key.
To perform file (track) random, touch the

[T.RDM] key.

• To return to the STANDARD screen, touch
the [OFF] key.

.

DVD Video Operations

Watching a DVD-Video

After disc loading, the play mode is
automatically engaged.

• Button operation may not be allowed
depending on the story of the disc.

● After the menu screen is displayed

For normal DVD-Video discs, the menu screen
appears.

After the menu screen is displayed, select an
item in the following operations and play it back.

32 VRX935VD

DVD Video Player Operations

English

Showing the DVD menu

1. Press the [MENU] button during playback.

The DVD menus appears.
The displayed contents may differ,

depending on the DVD software.

• Example showing menu display

2. To cancel to the DVD menu, press the

[MENU] button again.

∗ To select the menu contents, press the [KEY

PAD ] button and use either the “Cross KEY
PAD ” or the “Ten KEY PAD” according to the

disc contents menu.

Switching KEY PAD position

When the KEY PAD becomes difficult to view in
the menu display, you can move it to the other
side of the screen.

KEY PAD

Stopping playback

1. Press and hold the [s] button for 1

second or longer during playback. Playback
stops.

2. To resume playback. Press the [s] button,

and playback resumes from the scene where
playback is stopped.

Pausing playback

1. Press the [s] button during playback.

Playback pauses.

2. To resume playback. Press the [s] button,

and playback resumes.

Slow playback

1. Press the [s] button then press and hold

the [d] button. While the button is being
pressed, slow playback continues at the
speed 1/2 times the normal playback.

• Slow playback cannot be performed in the
backward direction. In addition, audio
cannot be reproduced during slow
playback.

Skipping a chapter (searching)

About chapter

Chapter means a small segment to divide the
data area of the disc.

1. Press the [a] or [d] button during

playback.
Chapters are skipped, as many as the times

the button is pressed, and playback starts.

Current

or

location

or

Owner’s manual

KEY PAD

Chapter

down

• Press the [d] button, and playback starts
from the beginning of the next chapter.

• Press the [a] button, and playback starts
from the beginning of the current chapter.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous chapter.

• The unit may return to the menu screen
when the [d] button or [a] button is
pressed.

Chapter

Chapter

up

VRX935VD 33

English

DVD Video Player Operations

Fast forward and fast backward

1. Press and hold the [a] button or [d] button

during playback.

Owner’s manual

Press and hold the button, and the playback
speed becomes 4-time faster first and then
16-time faster 3 seconds later. Release the
button, and the normal speed is restored.

• No audio is reproduced during fast forward
and fast rewind operation.

• The fast forward and fast rewind speed
may differ depending on the disc.

• The menu screen may appear when the
button is pressed.

Searching with a chapter/title
number

You can locate the beginning of the scene using
the chapter numbers or title numbers recorded
on the DVD-Video disc.

1. Display the sub KEY PAD using the

procedures described in the section “KEY
PAD operation”.

2. Touch the [SRCH] key.
Each time you touch the [SHIFT] key, you

can switch between title number input “[T**]”
and chapter number input “[C***]”.

• Title

A large segment to divide the data area of
the disc.

• Chapter

A small segment to divide the data area of
the disc.

3. Input the number of the title that you want to
play back with the [0] to [9] key.

4. Touch the [ENT] key.
Playback starts from the scene of the input

title number or chapter number.

• If the input title number does not exist or

searching with a title number is not
allowed, the following message appears to
invalidate the input.

Scan playback

Scans and plays back all chapters recorded on
the DVD-Video, the first 10 seconds for each.

1. Touch the screen and touch the [SUB
MODE] key.

2. Touch the [CHAPTER SCAN] key, then
touch the [RTN] key.

After scan playback of all chapters on the
disc, chapter scanning through the same
disc is performed again.

Depending on the disc, the menu may
appear again after scan playback of all
chapters within the title.

3. Touch the [CHAPTER SCAN] key again,
and scan playback is turned off.

Repeat playback

This operation plays back chapters/titles
recorded on the DVD-Video repeatedly.

● Chapter repeat:

Plays back one chapter repeatedly.

1. Touch the screen and touch the [SUB
MODE] key.

2. Touch the [CHAPTER REPEAT] key, then
touch the [RTN] key.

3. Touch the [CHAPTER REPEAT] key, repeat
playback is turned off.

● Title repeat:

Plays back all chapters within the title
repeatedly.

1. Touch the screen and touch the [SUB
MODE] key.

2. Touch the [TITLE REPEAT] key, then touch
the [RTN] key.

3. Touch the [TITLE REPEAT] key, repeat
playback is turned off.

TOP function

The TOP function resets the DVD player to the
first chapter of the track.

1. Press the [BND] button to playback the first
chapter(chapter No. 1).

34 VRX935VD

DVD Video Player Operations

English

Using the title menu

On DVD discs containing two or more titles, you
can select from the title menu for playback.

1. Press and hold the [MENU] button for 1

second or longer during playback.
The title menu screen appears.

• Press the [MENU] button, and playback

resumes from the scene played back
before [MENU] button is pressed.

• Depending on the disc, the title menu
cannot be called.

2. Touch the [w], [z], [Å] or [Î] key to select

the item.

• Depending on the disc, items cannot be
selected with the ten-key buttons.

3. Touch the [ENT] key.

Switching among languages

On discs in which two or more audios or audio
languages have been recorded, you can switch
among the audio languages during playback.

1. Display the sub KEY PAD using the

procedures described in the section “KEY
PAD operation”.

2. Touch the [AUDIO] key during playback.

Each time you touch the key, you can switch
among audio languages.

• Depending on the disc, up to 8 audios may
be recorded. For details, see the mark of
the disc (8: Indicates that 8 audios have
been recorded).

• When the power is turned on and when the
disc is changed with a new one, the
language set at the time of factory
shipment is selected. If that language has
not been recorded, the language specified
on the disc.

• Depending on the disc, switching may be
completely impossible or impossible on
some scenes.

• It may take time to switch among audios.

Switching subtitles

On DVD discs in which two or more subtitle
languages have been recorded, you can switch
among the subtitle languages during playback.

1. Display the sub KEY PAD using the

procedures described in the section “KEY
PAD operation”.

2. Touch the [SUB TTL] key during playback.

Each time you touch rhe key, you can switch
among subtitles.

• Depending on the disc, up to 32 kinds of
subtitles may be recorded. For details, see
the mark of the disc (8: Indicates that 8
kinds of subtitles have been recorded).

• Depending on the disc, switching may be
completely impossible or impossible on
some scenes.

• It may take time to switch among subtitles.

● To turn off subtitles

1. Touch the [SUB TTL] key several times, and

subtitles are turned off.

In initial setting:

Off Subtitle 1 Subtitle 2

Subtitle X

Owner’s manual

VRX935VD 35

English

DVD Video Player Operations

Switching angles

On DVD discs in which video images have been
recorded in two or more angles, you can switch

Owner’s manual

among the angles during playback.

1. Display the sub KEY PAD using the

procedures described in the section “KEY
PAD operation”.

2. Touch the [ANGLE] key during playback.

Each time you touch the key, you can switch
among angles.

• Depending on the disc, up to 9 angles may
be recorded. For details, see the mark of

the disc ( : Indicates multi-angle).

• Depending on the disc, angles may switch
smoothly or switch with a momentary still
image.

• When the power is turned on and when the
disc is changed with new one, the
language set at the time of factory
shipment is selected. If that language has
not been recorded, the language specified
on the disc.

• Depending on the disc, switching may be
completely impossible or impossible on
some scenes.

• It may take time to switch among angles.

• Depending on the disc, scenes recorded in

two or more angles may be played back.

Displaying the playback status

1. Press the [DISP] button or touch the
[P.TIME] key in the sub KEY PAD display
(using the procedures described in the
section “KEY PAD operation”) during
playback.

Each time you press the button or touch the
key, you can switch between display (ON)
and non-display (OFF) of the playback
status.

TITLE ELAPSED TITLE REMAIN

CHAPTER REMAIN CHAPTER ELAPSED

• CHAPTER ELAPSED:

Elapsed time of the chapter

• CHAPTER REMAIN:

Remaining time of the chapter

• TITLE ELAPSED:

Elapsed time of the title

• TITLE REMAIN:

Remaining time of the title

Watching a video CD

After disc loading, the play mode is
automatically engaged.

• Button operation may not be allowed
depending on the story of the disc.

■ After the menu screen is displayed

For V-CD discs equipped with the PBC (Play
Back Control) function, the menu screen
appears. After the menu screen is displayed,
select an item in the following operations and
play it back.

Showing the V-CD menu (for V-CD
discs with PBC)

This key does not function on some discs.

1. Press the [MENU] button during playback.

The V-CD menu appears.
The displayed contents may differ,

depending on the V-CD software.

• Example showing menu display

• Depending on the playback status or disc,

the following indication may appear.

Each time you touch the key for about 1
second or longer, you can switch among time
display.

36 VRX935VD

∗ To select the menu contents, press the [KEY

PAD ] button and use either the “Cross KEY
PAD ” or the “Ten KEY PAD” according to the

disc contents menu.

LL (Left) RR (Right) LR (Stereo)

DVD Video Player Operations

English

Stopping playback

1. Press the [s] button for 1 second or

longer during playback. Playback stops.

● When the PBC is turned on
Resume playback

When the Play/pause [s] button is pressed,
the disc plays from the beginning.

● When the PBC is turned off

To resume playback, press the [s] button,
and playback resumes from the scene where
playback is stopped.

Pausing playback

1. Press the [s] button during playback.

Playback pauses.

2. To resume playback, press the [s] button,

and playback resumes.

Slow playback

1. Press the [s] button then press and hold

the [d] button.
While the button is being pressed, slow

playback continues at the speed 1/2 times
the normal playback.

• Slow playback cannot be performed in the
backward direction. In addition, audio
cannot be reproduced during slow
playback.

Fast forward and fast backward

1. Press and hold the [a] button or [d] button

during playback.
Press and hold the button, and the playback

speed becomes 4-time faster first and then
16-time faster 3 seconds later. Release the
button, and the normal speed is restored.

• No audio is reproduced during fast forward
and fast rewind operation.

• The unit may return to the menu screen
when the button is pressed.

Searching with a track number

This operation allows searching with the track
numbers recorded on the video CDs.

1. Display the sub KEY PAD using the

procedures described in the section “KEY
PAD operation”.

2. Touch the [SRCH] key.

3. Input the number of the track that you want

to play back with [0] to [9] key.

4. Touch the [ENT] key.

Playback starts from the scene of the input
track number.

• If the input track number does not exist or
searching with a track number is not
allowed, the following message appears to
invalidate the input.

Owner’s manual

Skipping a track (searching)

1. Press the [a] or [d] button during

playback.
The track is skipped and playback starts.

Track

Backward
direction

• Press the [d] button, and playback starts

from the beginning of the next track.

• Press the [a] button, and playback starts

from the beginning of the current track.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous track.

∗ This operation cannot be performed on some

discs with PBC.

or

Current
location

Track

or

Track

Playback
direction

∗ If you are playing a disc with PBC and the

PBC function is engaged, this operation may
not be performed.

Changing audio output

You can change the audio output method.

1. Display the sub KEY PAD using the

procedures described in the section “KEY
PAD operation”.

2. Touch the [AUDIO] key during playback.

Each time you touch the key, you can switch
among audio output methods.

VRX935VD 37

English

DVD Video Player Operations

Other various play functions

1. Touch the screen, the MENU screen
appears.

Owner’s manual

2. Touch the [SUB MODE] key in the MENU
screen to show SUB MODE.

3. Touch the touch key of the function you want
to play.

● [TRACK SCAN]

This operation scans and plays back all tracks
on the disc, the first 10 seconds for each.

“TRACK SCN” will appear in the screen during
play.

● [TRACK REPEAT]

This operation plays back one track recorded on
the video CD repeatedly.

“TRACK RPT” will appear in the screen during
play.

● [TRACK RANDOM]

This operation plays back all tracks on the disc
in no particular order.

“TRACK RDM” will appear in the screen during
play.

4. To cancel play, touch the touch key again.

• To return to the original screen, touch the

[RTN] key.

If you are playing a disc with PBC and the
PBC function is engaged, this operation can
not be performed.

Displaying the playback status

1. Press the [DISP] button during playback.
Each time you press the button, you can

switch between display (ON) and non-display
(OFF) of the playback status.

• Depending on the playback status or disc,

the following indication may appear.

2. Display the sub KEY PAD using the
procedures described in the section “KEY
PAD operation”.

3. Touch the [P.TIME] key during playback.
Each time you touch the key, you can switch

among time display.

TRACK ELAPSED TRACK REMAIN

Note:

• Depending on some discs, the [P.TIME] indication

may not be displayed on some scenes. Also, it
may occur that the P.TIME operation does not
work. When this happens, the indication
"INVALID" will appear.

38 VRX935VD

On/off of Playback Control

∗ This function is enabled only using the remote

control unit.

∗ The factory default setting is “ON”.

On video CDs equipped with Play Back Control
function, you can turn it on/off.

1. Press the [PBC] button on the remote control

unit.
Each time you press the button, you can

switch between on and off.
When the PBC is turned on or off, the disc

plays from the beginning.

● Playback control (PBC)

This control signal is recorded on a Video CD
for version 2.0 and used to control playback.
Using pre-recorded menu screens in the Video
CD with PBC, you can enjoy playback of
software with a simplified dialog function or
software with search function. You can also
enjoy a still picture at high or standard
resolution.

● When PBC is on

If one of the following operations is done, the
disc plays from the beginning.

When the [FUNC] button is pressed to switch to
some other mode, and the DVD player mode is
returned again.

When the [s] button is pressed to play the
disc again after play is stopped by pressing and
holding the [s] button for 1 second or longer.

When the ACC switch of a car is turned on/off.

Listening to a CD

∗ This unit is a CD TEXT compatible model.

This unit supports the display of the DISC
TITLE, TRACK TITLE and ARTIST of the CD
TEXT.

After disc loading, the play mode is
automatically engaged.

Note:

• This unit supports only CD TEXT in English. Also,
some character data may not be reproduced
properly on the display.

Pausing playback

1. Press the [s] button during playback.

Playback pauses.

2. To resume playback, press the [s] button,

and playback resumes.

DVD Video Player Operations

English

Skipping a track (searching)

1. Press the [a] or [d] button during

playback.
Tracks are skipped, as many as the times

the button is pressed, and playback starts.

• Press the [d] button, and playback starts

from the beginning of the next track.

• Press the [a] button, and playback starts

from the beginning of the current track.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous track.

TOP function

The TOP function resets the DVD player to the
first track of the disc.

1. Press the [BND] button to playback the first

track (track No. 1).

Fast forward and fast backward

1. Press and hold the [a] button or [d] button

during playback.
Press and hold the button, and the playback

speed becomes 4-time faster first and then
8-time faster 3 seconds later. Release the
button, and the normal speed is restored.

Searching with a track number

This operation allows searching using the track
numbers recorded on the CDs.

1. Press the [KEY PAD] button and toch the
[SRCH] key.

2. Input the number of the track that you want
to play back with [0] to [9] key.

3. Touch the [ENT] key.
Playback starts from the scene of the input

track number.

• If the input track number does not exist or

searching with a track number is not
allowed, the following message appears to
invalidate the input.

2. Touch the [TRACK SCAN] key, then touch
the [RTN] key.

Touch the [TRACK SCAN] key again, and
scan playback is turned off.

Repeat playback

This operation plays back tracks recorded on
the CD repeatedly.

1. Touch the screen and touch the [SUB
MODE] key.

2. Touch the [TRACK REPEAT] key, then touch
the [RTN] key.

Touch the [TRACK REPEAT] key again, and
repeat playback is turned off.

Random playback

This operation plays back all tracks on the disc
in no particular order.

1. Touch the screen and touch the [SUB
MODE] key.

2. Touch the [TRACK RANDOM] key, then
touch the [RTN] key.

Touch the [TRACK RANDOM] key, and
random playback is turned off.

Changing the display of the
playback status

1. Press the [KEY PAD] button and touch the
[P.TIME] key for 1 second or longer during
playback.

Each time you touch the key, you can switch
among time display.

TRACK ELAPSED TRACK REMAIN

Displaying CD titles

This unit can display title data for CD-text CDs.

∗

This function is enabled only when the panel is open.

1. Press the [DISP] button.
Disc title, track title and artist title are

displayed. Press the [DISP] button again to
return to the previous mode.

Owner’s manual

Scan playback

This operation scans and plays back all tracks
recorded on the disc, the first 10 seconds for
each.

1. Touch the screen and touch the [SUB
MODE] key.

VRX935VD 39

English

DVD Video Player Operations

Listening to an MP3

This unit is a ID3 Tag compatible model.

Owner’s manual

This unit supports the title, artist and album
display of the ID3 Tag versions 1 and 1.1.

After disc loading, the play mode is
automatically engaged.

What is MP3?

MP3 is an audio compression method and
classified into audio layer 3 of MPEG standards.
This audio compression method has penetrated
into PC users and become a standard format.

This MP3 features the original audio data
compression to about 10 percent of its initial
size with a high sound quality. This means that
about 10 music CDs can be recorded on a CD­R disc or CD-RW disc to allow a long listening
time without having to change CDs.

Note:

• Some CDs recorded on CD-R mode may not be

usable.

Precautions when creating an MP3 disc

● File extensions

1. Always add a file extension “.MP3” or “.mp3”
to an MP3 file by using single byte letters. If
you add a file extension other than specified
or forget to add the file extension “.MP3” or
“.mp3”, the file cannot be played. In addition,
if you use upper case and lower case letters
(capital and small letters) mixedly for file
extensions, normal play may not be possible.

2. Files without MP3 data will not play.

● Logical format (File system)

1. When writing an MP3 file on a CD-R disc,
please select “ISO9660 level 1 or level 2
(without including expansion format)” as
the writing software format. Normal playback
may not be possible if the disc is recorded on
another format.

2. The folder name and filename can be
displayed as the title during MP3 play but the
title must be within 31 and 27 single byte
alphabetical letters and numerals for the
folder name and filename, respectively
(without including an extension). Entering
more letters or numerals than specified may
cause an incorrect display.

● Folder structure

1. A disc with a folder having more than 8
hierarchical levels will conflict with the
ISO9660 and playback will be impossible.

● Number of files or folders

1. A total of 255 files and folders are allowed.
(However, the maximum number of folders
must be within 254.) When the number of files
and folders is more than 256, playback of
tracks in excess of that number is impossible.

2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not
always be played in the order displayed on
the PC.)

• Some noise may occur depending on the

type of encoder software used while
recording.

• Files created using LAME (Lame Aint MP3

Encoder) may not be played properly.

• In case of a track recorded at VBR

(variable bit rate), the display for the play
time of the track may be slightly different
from the actual play time. Also, the
recommended value of VBR ranges from
64 kbps to 320 kbps.

• Depending on the damage conditions of a

file, it may occur that the file is not played
and the next file is played instead. Also, if
the damage is in a severe condition, play
stops showing the “DISC ERROR” display.

After disc selection, the play mode is
automatically engaged.

Note:

• If ID3 Tag information was entered with 2-byte

characters, it may occur that the characters are
not reproduced properly on the display.

Pausing playback

1. Press the [s] button during playback.
Playback pauses.

2. To resume playback,press the [s] button
again, and playback resumes.

40 VRX935VD

DVD Video Player Operations

English

Skipping a track (searching)

1. Press the [a] or [d] button during

playback.
Tracks are skipped, as many as the times

the button is pressed, and playback starts.

• Press the [d] button, and playback starts

from the beginning of the next track.

• Press the [a] button, and playback starts

from the beginning of the current track.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous track.

∗ This operation skips the track over the folder.

Fast forward and fast rewind

1. Press and hold the [a] button or [d] button

during playback.
Press the button, and the playback speed

becomes 4-time faster first and then 8-time
faster 3 seconds later. Release the button,
and the normal speed is restored.

Selecting a file (track) on the screen

1. Press the [MENU] button during playback.

Files (track) are displayed.

2. Touch the [w] or [z] key to select a file and

touch the [ENT] key.

3. Touch the [RTN] key to select a folder. The

folder selection screen appears.

4. Touch the [w] or [z] key to select the folder

and touch the [ENT] key. The file selection
screen is returned.

∗ If no further operation is performed for 7

seconds, the STANDARD screen is returned.

Playback by selecting a folder and
file (Direct select mode)

This operation allows searching using the folder
and file (track) numbers recorded on the MP3
disc.

1. Press the [KEY PAD] button and toch the
[SRCH] key.

Each time you touch the [SHIFT] key, you
can switch between “T000” for file (track)
number input and “F000” for folder number
input.

2. Input the number for the file (track) or folder
that you want to play back with [0] to [9] key.

3. Touch the [ENT] key.

When you select the folder number playback
starts from Track 1 of the input folder
number.

When you are searching for some other
folder and track while a file is being played,
pressing the [MENU] button will return to the
file being played.

Searching a desired file
(Track scan playback)

● About file scan playback

This operation plays back all files recorded on
the disc, about 10 seconds for each.

1. Touch the screen and touch the [SUB
MODE] key.

2. Touch the [TRACK SCAN] key, then touch
the [RTN] key.

The monitor displays “TRACK SCN”. Scan
playback starts from the next file.

3. To cancel file scan playback, touch the
[TRACK SCAN] key again. The playback
status indication “TRACK SCN” goes off
from the monitor and the file currently being
played back continues.

Searching for a desired folder
(Folder scan playback)

This operation plays back the first files of all
folders on the MP3 disc, about 10 seconds for
each.

1. Touch the screen and touch the [SUB
MODE] key.

2. Touch the [FOLDER SCAN] key, then touch
the [RTN] key.

The monitor displays “FOLDER SCN” and
folder scan playback starts.

• Scan playback starts from the first file of

the next folder to the one currently being
played back.

3. To cancel folder scan playback, touch the
[FOLDER SCAN] key again. The playback
status indication “FOLDER SCN” goes off
from the monitor and the file currently being
played back continues.

Owner’s manual

VRX935VD 41

English

DVD Video Player Operations

Listening to one file repeatedly
(Track repeat playback)

This operation plays back the file currently being

Owner’s manual

played back repeatedly.

1. Touch the screen and touch the [SUB
MODE] key.

2. Touch the [TRACK REPEAT] key, then touch
the [RTN] key. The monitor displays “TRACK
RPT” and file repeat playback starts.

3. To cancel file repeat playback, touch the
[TRACK REPEAT] key again. The playback
status indication “TRACK RPT” goes off from
the monitor and the file currently being
played back continues in normal playback.

Listening to files in a folder
repeatedly (Folder repeat playback)

This operation plays back files in an MP3 folder
repeatedly.

1. Touch the screen and touch the [SUB
MODE] key.

2. Touch the [FOLDER REPEAT] key, then
touch the [RTN] key. The monitor displays
“FOLDER RPT” and folder repeat playback
starts.

3. To cancel folder repeat playback, Touch the
[FOLDER REPEAT] key again.

The playback status indication “FOLDER
RPT” goes off from the monitor and the file
currently being played back continues in
normal playback.

Listening to files in a random order
(Track random playback)

This operation plays the files in the folder in a
random order.

1. Touch the screen and touch the [SUB
MODE] key.

2. Touch the [TRACK RANDOM] key, then
touch the [RTN] key. The monitor displays
“TRACK RDM” and random playback starts.

3. To cancel file random playback, touch the or
[TRACK RANDOM] key again.

The playback status indication “TRACK
RDM” goes off from the monitor and the file
currently being played back continues in
normal playback.

Listening to tracks in a random
order (Folder random playback)

This operation plays back tracks recorded on
the disc in no particular order.

1. Touch the screen and touch the [SUB
MODE] key.

2. Touch the [FOLDER RANDOM] key, then
touch the [RTN] key. The monitor displays
“FOLDER RDM” and folder random playback
starts.

3. To cancel folder random playback, touch the
or [FOLDER RANDOM] key again.

The playback status indication “FOLDER
RDM” goes off from the monitor and the
track currently being played back continues
in normal playback.

Changing the display of the
playback status

1. Press the [KEY PAD] button and touch the
[P.TIME] key for 1 second or longer during
playback.

Each time you touch the key, you can switch
among time display.

TRACK ELAPSED TRACK REMAIN

TOP function

The TOP function resets the DVD player to the
first track of the disc.

1. Press the [BND] button to playback the first
track(track No. 1).

Displaying MP3 ID3-TAG titles

ID3 information such as title, artist and album
title can be displayed for an MP-3 file containing
ID3 Tag information.

∗ This function is enabled only when the panel is

open.

1. Press the [DISP] button.
Title, artist and album title are displayed.

Press the [DISP] button again to return to the
previous mode.

∗ In case of an MP3 file without ID3-TAG data,

“NO ID3 TAG DATA” appears in the display
then return to the STANDARD screen.

42 VRX935VD

VISUAL Operations

English

This function is available when a VTR, etc. is
connected to the visual 1 or visual 2 terminal.

∗ The visual 1 mode is not available when a DVD

changer is connected to the visual 1.

WARNING

For your safety, the driver should not
watch the VTR, etc. or operate the controls
while driving. Please note that watching
and operating the VTR, etc. while driving
are prohibited by law in some countries.

Switching to the VISUAL mode

Note:

• For your safety, the VRX935VD has a safety
function which turns off the picture when the car
is moving, so only the audio can be heard. The
picture can only be watched when the car is
stopped and the parking break is applied.

1. Press the [FUNC] buton and select the

VISUAL mode.

2. Press the [BND] button to select the

VISUAL1 or VISUAL2.

Switching the VTR system between
NTSC and PAL

∗ This function is enabled only when the panel is

open.

Switch to the VISUAL/VTR in TV mode you use.

1. Press the [ADJ] button to switch to the

ADJUST MODE menu.

2. Touch the [NTSC/PAL] key, [NTSC] key and

[PAL ] key appears in the display.

3. Touch the [NTSC] key or [PAL] key to select

“NTSC” or “PAL”.

Adjusting the brightness and tone
of color

Notes:

• This function is not available when the display is
stored.

• The HUE setting can be adjusted only when the
NTSC mode is selected.

• Switch to the VISUAL/DVD player(DVD video or
video CD)/DVD changer/TV mode you see.

1. Press the [ADJ] button to switch to the

ADJUST MODE menu.

2. Touch the [MONI ADJ] key to display

[BRIGHT], [HUE] and [COLOR] key. Touch
the [BRIGHT], [HUE] and [COLOR] key to
adjust BRIGHT, HUE and COLOR.

● “BRIGHT”:
Adjust the brightness of the display.

● “HUE”:
Adjust the tone of color (red is emphasized

or green is emphasized)

• This operation is available only when the car
is stopped and the parking brake is applied.

● “COLOR”:

Adjust the color saturation.

• This operation is available only when the car
is stopped and the parking brake is applied.

3. Operate the touch key to adjust a level.

● “BRIGHT”:

[–] key or [+] key

● “HUE”:

[R] key or [G] key

● “COLOR”:

[–] key or [+] key

4. When adjustment is made, touch the [RTN]

key to return to the ADJUST MODE menu.
Touch the [RTN] key again to return to the

STANDARD screen.

∗ To return from the adjust a level display to the

STANDARD screen, press the [ADJ] button
once again.

Owner’s manual

VRX935VD 43

English

VISUAL Operations

Changing over monitor display size

∗ This function is available only when the panel is

open.

Owner’s manual

Notes:

• This function is not available while you are
driving.

• Switch to the VISUAL/DVD player(DVD video or
video CD)/DVD changer/TV mode you see.

1. Press the [DISP] button for 1 second or

longer to change over the monitor display
size. Each time you press the [DISP] button,
the monitor display size changes in the
following order:

“NORMAL” ➜ “WIDE” ➜ “F. WIDE” ➜
“CINEMA” ➜ “NORMAL”

● “NORMAL”: (normal display)
There is a black area at both right and left

ends of a display. In case of normal TV
broadcasting (4:3), the image can be shown
without being cut or deformed.

● “WIDE”: (wide mode)
The image at right and left ends in a display

elongates horizontally.

● “F. WIDE”: (full wide mode)
The whole image elongates horizontally.

● “CINEMA”: (cinema mode)
The image at both top and bottom in a

display disappears.

Notes:

• When a normal 4:3 size image, not being a wide
one, is viewed by displaying it fully on a wide
monitor display in a wide mode or a full-wide
mode, a part of the peripheral image will be
lacking or deformed. In deference to the intention
of producer, an original image can be viewed in a
normal mode.

• During superimposed display, it becomes a full­wide mode.

• When the monitor display size mode is changed,
only the monitor display size indication
superimposed on the screen (“NORMAL”,
“WIDE”, “F.WIDE” or “CINEMA”) will be changed,
then the corresponding display size mode will be
engaged.

Monitoring the CCD camera

The CCD camera can be connected to this unit.
For the power supply of the camera, mount the
power box sold separately (CAA-188).

Note:

• This function is not available when the display is
stored.

Switching the 2-ZONE/3-ZONE

The front monitor lock and rear monitor lock
allows you to enjoy 2-ZONE and 3-ZONE.

2-ZONE:

Use the front monitor lock (or rear monitor lock)
to lock the receiver screen image (or image
from a separately sold rear monitor) to switch
the speaker sound to a sound mode that differs
from the sound accompanying the image.

3-ZONE

When a separately sold rear monitor is
connected, use the front or rear monitor lock to
lock the image of the receiver and that of the
rear monitor and to switch the speaker sound to
a sound mode that differs from the sound
accompanying the image.

Notes:

• The front monitor lock displays the image of an
external device (VTR, TV game console, etc.)
connected to the Visual 2 terminal.

• The rear monitor lock displays the image of an
external device (VTR, TV game console, etc.)
connected to the Visual 1 terminal.

• When a DVD changer connected to the CeNET is
connected to the Visual 1 terminal, the rear
monitor lock cannot be used.

• When 2-ZONE or 3-ZONE is used, the sound
from an external device (VTR, TV game console,
etc.) can only be heard from headphones
connected to the external device.

• A rear monitor is a separately sold accessory.

44 VRX935VD

VISUAL Operations

● Lock system monitor image and sound

English

2 ZONE

Front monitor lock

(∗1)

Visual 2 connection

[OTHERS]

Front image
(receiver
screen)

Rear monitor
image
(separately
sold)

Vehicle speaker
sound

∗1 A device connected to the Visual 2 terminal should be set up as described in the section

“Switching Connect.”

∗2 No image is displayed on the rear monitor when a non-image mode such as radio, CD, etc. is

engaged.

∗3 For safety reasons, this image is not displayed when the vehicle is moving. The picture can be

watched only when the vehicle is standing still and the parking brake is engaged.

Image of device
connected to the
Visual 2 terminal
(∗3)

Image of device
connected to the
Visual 2 terminal
(∗3)

Plays sound of mode selected using the [FUNC] button

2-ZONE: 1 (front monitor lock)

1. Press the [M.L] button.

2. Press the [FUNC] button to select the

desired mode.

3. To cancel the monitor lock, press the [M.L]

button.
The screen shows the image of the selected

mode.

∗ When the front monitor lock is engaged,

[MENU], [LIST], [KEY PAD], [ADJ] and [A-M]
button cannot be used. Cancel the monitor
lock when you wish to use these buttons.

Visual 2 connection

[NAVI]

Image of device
connected to the
Visual 2 terminal

Displays image of
mode selected
using the [FUNC]
button (∗2)

5. Touch the [RTN] key or press the [ADJ]

Locking the front monitor and rear
monitor (3-ZONE)

1. Lock the rear monitor by performing the

2. Press the [M.L] button to lock the front

3. Press the [FUNC] button.

2-ZONE: 2 (rear monitor lock)

1. Press the [ADJ] button to display the

ADJUST MODE menu.

2. Touch the [REAR MONI LOCK] key and the
[ON] key.

3. Touch the [RTN] key or press the [ADJ]
button.

4. To cancel the monitor lock, press [ADJ]
button, touch the [REAR MONI LOCK] key
and the [OFF] key.

4. To cancel the monitor lock, press the [M.L]

5. To cancel the rear monitor lock, press the

Rear monitor

lock

Displays image of
mode selected
using the [FUNC]
button

Image of device connected to the
Visual 1 terminal

button.
The monitor lock is now canceled.

instructions in steps 1 to 3 above.

monitor.

The image for the selected mode is
displayed for about 5 seconds after which
the front monitor lock image is displayed.

button.

[ADJ] button, touch the [REAR MONI LOCK]
key and the [OFF] key.

3 ZONE

Image of device
connected to the
Visual 2 terminal
(∗3)

Owner’s manual

VRX935VD 45

English

VISUAL Operations

Switching CONNECT(connect)

Make the following settings when an external
device is connected to the VISUAL 2 terminal.

Owner’s manual

NAVI: when a navigation system is

OTHERS: for external devices other than a

NONE: when no external devices are

∗ The factory default setting is “NONE”.

1. When the panel is open, press the [ADJ]

2. Touch the [z] key two times to select

3. Press the [ADJ] button again or touch the

connected

∗ When a navigation system is

connected, use the monitor lock
function. Locking the monitor locks
the screen size in F.WIDE mode (full
wide) and the VTR system to NTSC.

navigation system

connected

button to display the ADJUST MODE menu.

“CONNECT”.
Touch the [CONNECT] key to select “NAVI”

or “OTHERS” or “NONE”.

[RTN] key, the unit returns to the previous
mode.

CD/MD Changer
Operations

Note:

• When an optional DVD (CD/MD) changer is
connected through the CeNET cable, this unit
controls all DVD (CD/MD) changer functions. This
unit can control a total of 2 changers (MD and/or
CD and/or DVD).

CD/MD changer functions

Press the [FUNC] button and select the CD
changer mode to start play. If 2 CD (MD)
changers are connected, press the [FUNC]
button to select the CD (MD) changer for play.

∗ If “NO MAGAZINE” appears in the display, insert

the magazine into the CD changer. “DISC
CHECKING” appears in the display while the
player loads (checks) the magazine.

∗ If “NO DISC” appears in the display, eject the

magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.

∗ If “NO DISC” appears in the display, load MDs

into the MD changer.

CAUTION

CD-ROM discs cannot be played in the CD
changer.

Pausing play

1. Press the [

“PAUSE” appears in the display.

2. To resume play, press the [

again.

∗ When the panel is open, the same operation

is also available by using the [s] button in
the panel.

ss

s] button to pause play.

ss

ss

s] button

ss

46 VRX935VD

Switching the CD TEXT titles

This operation is only possible when this unit is
connected with a CD TEXT compatible CD
changer.

You can select the CD TEXT titles among the
disc titles, track titles and artist titles.

When the panel is closed:

1. Press the [DISP] button to show the SUB

display. The disc title, track title or artist titles,
user title is displayed.

2. Each time you press and hold the [DISP]

button for 1 second or longer, the display
toggles among the disc title, the track title or
the artist titles, user title.

The selected title scrolls once.

CD/MD Changer Operations

English

When the panel is open:

1. Press the [DISP] button.

The disc title, track title, artist title and user
title is displayed.

2.

Touch the [DISC] key, [TRACK] key,
[ARTIST] key or [USER] key to select the
desired title.

The selected titles except for the user title
scroll once.

3. Press the [DISP] button again.

The STANDARD screen is returned and the
selected title is displayed.

Switching disc titles and track titles
(MD)

This unit can display disc titles and track titles
already entered on MDs. Titles up to 256
characters long can be displayed by scrolling
the titles.

∗ Titles cannot be entered for MDs with this unit.

When the panel is closed:

1. Press the [DISP] button to show the SUB

display. The disc title or track title is
displayed.

2. Each time you press and hold the [DISP]

button for 1 second or longer, the display
toggles between the disc title and the track
title.

The selected title scrolls once.

When the panel is open:

1. Press the [DISP] button.

The disc title and track title are displayed.

2. Touch the [DISC] key or [TRACK] key to

select the desired title.
The selected titles scroll once.

3. Press the [DISP] button again.

The STANDARD screen is returned and the
selected title is displayed.

Selecting an MD

When the panel is closed:

Each of the [DIRECT] button corresponds to an
MD loaded into the MD changer.

Press the [DIRECT] button (1 to 6) and select
the desired MD.

When the panel is open:

1. Touch the screen or press the [LIST] button.

2. Each of the [DIRECT] key corresponds to an

MD loaded into the MD changer.
Touch the [DISC SELECT] key in the display,

the [DIRECT] key (1 to 6) appears in the
display.

Touch the [DIRECT] key (1 to 6) and select
the desired MD.

Selecting a CD

When the panel is closed:

Each of the [DIRECT] buttons corresponds to a
disc loaded into the magazine.

● Selecting a disc from 1 to 6

Press the corresponding [DIRECT] button (1 to

6) to select the desired disc.

● Selecting a disc from 7 to 12 (only when a

12 disc CD changer is used.)

Press the corresponding [DIRECT] button (1 to

6) for 1 second or more, then select the desired

disc.

When the panel is open:

Each of the [DIRECT] keys corresponds to a
disc loaded into the magazine.

● Selecting a disc from 1 to 6

1. Touch the screen or press the [LIST] button.

2. Touch the [DISC SELECT] key in the display,

the [DIRECT] key (1 to 6) appears in the
display.

Touch the corresponding [DIRECT] key (1 to

6) to select the desired disc.

● Selecting a disc from 7 to 12 (Only when a

12 disc CD changer is used.)

Touch the [DISC SELECT] key again, the
[DIRECT] key (7 to 12) appears in the display.

Touch the corresponding [DIRECT] key (7 to 12)
to select the desired disc.

Switching to a next disc. (Disc Up
function)

The disc up function plays from the first track
(track No.1) of the next disc.

Press the [BND] button.
Each time you press the [BND] button, the disc

changes to the next disc.

Owner’s manual

VRX935VD 47

English

CD/MD Changer Operations

Selecting tracks with the KEY PAD

∗ This function displays the KEY PAD on the screen

and allows you to select and repeat tracks you

Owner’s manual

wish to listen to.

Press the [KEY PAD] button to display the KEY
PAD.

● Direct track selection

1.

Touch the [SRCH] key to switch the KEY
PAD.

2. Touch the [0] ~ [9] key corresponding with

the track you desired. When you touch the
wrong number([0] ~ [9] key), you can cancel
that to touch the [DEL] key.

3. Touch the [ENT] key.

The specified track is selected and playback
starts.

● To repeat tracks,

touch the [T.RPT] key.

● To repeat discs,

touch the [D.RPT] key.

● To scan tracks,

touch the [T.SCN] key.

● To scan discs,

touch the [D.SCN] key.

● To play tracks at random,

touch the [T.RDM] key.

● To play discs at random,

touch the [D.RDM] key.

Selecting a track

● Track-up

1. Press the [d] button to move ahead to the

beginning of the next track.

2. Each time you press the [d] button, the

track advances ahead to the beginning of the
next track.

∗

When the panel is open, the same operation is also
available by using the [d] button in the panel.

● Track-down

1. Press the [a] button to move back to the

beginning of the current track.

2. Press the [a] button twice to move to the

beginning of the previous track.

∗

When the panel is open, the same operation is also
available by using the [a] button in the panel.

Fast-forward/Fast-backward

● Fast-forward

Press and hold the [d] button for 1 second or
longer.

∗ When the panel is open, the same operation

is also available by using the [d] button in
the panel.

● Fast-backward

Press and hold the [a] button for 1 second or
longer.

∗ When the panel is open, the same operation

is also available by using the [a] button in
the panel.

Top function (CD)

The top function plays from the first track (track
No. 1) of the disc.

● When playing a disc 1 to 6

Press the [DIRECT] button (1 to 6) with the
same number as the CD playing.

● When playing a disc 7 to 12 (only when a

12 disc CD changer is used.)

Press the [DIRECT] button (1 to 6) with the
same number as the CD playing for 1 second or
longer.

Top function (MD)

The top function plays from the first track (track
No. 1) of the disc.

Press the [DIRECT] button (1 to 6) with the
same number that the MD playing.

∗ If an MD is not loaded in a slot of the MD

changer, pressing the [DIRECT] button
corresponding to its disc number is invalid.

48 VRX935VD

CD/MD Changer Operations

English

Scan play

The scan play locates and plays the first 10
seconds of each track on a disc automatically.
This function continues on the disc until it is
cancelled or the mode is changed.

∗ The scan play is useful when you want to select a

desired track.

1. Touch the screen or press the [LIST] button,

the MENU screen appears.

2. Touch the [SUB MODE] key in the

STANDARD screen to show SUB MODE.
Touch the [TRACK SCAN] key to start scan

play. “TRACK SCN” lights in the display.

3. Touch the [TRACK SCAN] key again to

cancel the scan play. Current track continues
to play.

Disc scan play

The disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected CD (MD) changer. This
function continues automatically until it is
cancelled or the mode is changed.

∗ The disc scan play is useful when you want to

select a desired CD (MD).

1. Touch the screen or press the [LIST] button,

the MENU screen appears.

2. Touch the [SUB MODE] key in the MENU

screen to show SUB MODE.
Touch the [DISC SCAN] key to start disc

scan play. “DISC SCN” lights in the display.

3. Touch the [DISC SCAN] key again to cancel

disc scan play. Normal disc play continues
on the current track.

Disc repeat play

After all tracks in the current disc have been
played, the disc repeat play automatically
replays the current disc over from the first track.
This function continues automatically until it is
cancelled.

1. Touch the screen or press the [LIST] button,

the MENU screen appears.

2. Touch the [SUB MODE] key in the MENU

screen to show SUB MODE.
Touch the [DISC REPEAT] key, disc repeat

play starts, “DISC REPEAT” light in the
display.

3. To cancel disc repeat play, touch the [DISC

REPEAT] key again. “DISC REPEAT” goes
off from the display and the unit returns to
normal play from the track being played.

Random play

The random play selects and plays individual
tracks on the disc in no particular order. This
function continues automatically until it is
cancelled.

1. Touch the screen or press the [LIST] button,

the MENU screen appears.

2. Touch the [SUB MODE] key in the MENU

screen to show SUB MODE.
When you touch the [TRACK RANDOM]

key, random play starts. “TRACK RANDOM”
lights in the display.

3. To cancel random play, touch the [TRACK

RANDOM] key again. “TRACK RANDOM”
goes off from the display and the unit returns
to normal play.

Owner’s manual

Repeat play

The repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.

1. Touch the screen or press the [LIST] button,

the MENU screen appears.

2. Touch the [SUB MODE] key in the MENU

screen to show SUB MODE.
Touch the [TRACK REPEAT] key, to make

repeat play starts. “TRACK REPEAT” lights
in the display.

3.

To cancel repeat play, touch the [TRACK
REPEAT] key. “TRACK REPEAT” goes off
from the display and the unit returns to normal
play.

Disc random play

The disc random play selects and plays
individual tracks or discs automatically in no
particular order. This function continues
automatically until it is cancelled.

1. Touch the screen or press the [LIST] button,

the MENU screen appears.

2. Touch the [SUB MODE] key in the MENU

screen to show SUB MODE.
When you touch the [DISC RANDOM] key,

disc random play starts. “DISC RANDOM”
lights in the display.

3. To cancel disc random play, touch the [DISC

RANDOM] key again. “DISC RANDOM”
goes off from the display and the unit returns
to normal play from the track being played.

VRX935VD 49

English

DVD Changer Operations

TV Operations

This function allows you to control a connected
DVD changer in the same way as described in
DVD player Operation.

Owner’s manual

For details on operations other than those
described below, see DVD player Operation.
For details on DVD changer precautions, refer
to the supplied owner’s manual.

Selecting a disc

When the panel is closed :

Each of the [DIRECT] button corresponds to a
disc loaded into the DVD changer.

Press the [DIRECT] button (1 to 6) and select
the desired disc.

When the panel is open :

Press the [LIST] button, otherwise press the
[DISC SEL] button on the remote control unit.

Touch the [DIRECT] key (1 to 6) in the display
or press the numeric button for the disc number
(1 to 6) on the remote control unit to select the
desired disc.

Switching to a next disc. (Disc Up
function)

The disc up function plays from the first track
(track No.1) of the next disc.

Press the [BND] button.
Each time you press the [BND] button, the disc

changes to the next disc.

Disc Repeat playback

This operation plays back all tracks on the disc
repeatedly.

There are 3 ways available :

• Press the [KEY PAD] button and touch the
[D.RPT] key.

• Touch the screen and touch the [SUB MODE]
key. Touch the [DISC REPEAT] key then
touch the [RTN] key.

• Press the [RPT] button on the remote control
unit 1 second or longer.

∗ To cancel the disc repeat play, touch the [D.RPT]/

[DISC REPEAT] key or press the [RPT] button on
the remote control unit.

TV functions

When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner.

WARNING

For your safety, the driver should not
watch the TV or operate the controls
while driving. Please note that watching
and operating the TV while driving are
prohibited by law in some countries.

Watching TV

Notes:

• For your safety, the VRX935VD has a safety
function which turns off the picture when the car
is moving, so only the audio can be heard. The
picture can only be watched when the car is
stopped and the parking break is applied.

1. Press the [FUNC] button and select the TV

mode.

2. Press the [BND] button to select the desired

TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles
between TV1 and TV2.

3. Press the [d] or [a] button to tune in the

desired TV station.

∗ When the panel is open, the same operation

is also available by using the [a] or [d]
button in the panel.

Watching a video

The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.

1. Touch the screen or press the [LIST] button,

the MENU screen appears.

2. Touch the [EXTRA SELECT] key in the

MENU screen to select the [VTR] key.

3. To return to the TV broadcast, touch the

screen again and touch the [EXTRA
SELECT] key in the MENU screen to select
the [TELEVISION] key.

50 VRX935VD

TV Operations

English

Seek tuning

1. Press the [BND] button and select the
desired TV band (TV1 or TV2).

∗ If “MANU” is lit in the display, press and hold

the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek
tuning is now available.

2. Press the [d] or [a] button to
automatically seek a station. Press the [d]
button to automatically tune up the frequency
band to the next available TV station; press
the [a] button to automatically tune down.

∗ When the panel is open, the same operation

is also available by using the [a] or [d]
button in the panel.

Selecting stations with the KEY
PAD

∗ This function displays the KEY PAD on the screen

enabling you to tune in through auto store, preset
scan or by entering a frequency.

Press the [KEY PAD] button to display the KEY
PAD.

● Tuning in by selecting a frequency

∗ This function is supported only when the

component connected to the optional
TTX7501z (sold separately).

1. Touch the [SRCH] key to switch the KEY
PAD.

2. Touch the [0]~[9] key corresponding with the
frequency you desired. When you touch the
wrong number ([0]~[9] key), you can cancel
that to touch the [DEL] key.

3. Touch the [ENT] key. The radio station you
required would be tuned.

● To use auto store,

touch the [AS] key for about 2 seconds.

● To perform a preset scan,

touch the [PS] key.

● To cancel the KEY PAD display,

press the [KEY PAD] button or touch the [OFF]
key.

Manual tuning

There are 2 ways available: Quick tuning and
step tuning. When you are in the step tuning
mode, the frequency changes one step at a
time. In quick tuning mode, you can quickly tune
the desired frequency.

1. Press the [BND] button and select the
desired band. (TV1 or TV2)

∗ If “MANU” is not lit in the display, press and

hold the [BND] button for 1 second or longer.
“MANU” appears in the display and manual
tuning is now available.

2. Tune into a station.

● Quick tuning:

Press and hold the [d] or [a] button for 1
second or longer to tune in a station.

● Step tuning:

Press the [d] or [a button to manually tune in
a station.

Note:

•

Manual tuning is cancelled if you do not operate the
unit for 7 seconds longer. (∗Only when connecting
the TTX7503z or TTX7504z with this unit)

Recalling a preset station

A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your
favorite TV stations and store them in memory
for later recall.

There are 2 ways available to recall the preset
station.

● Using the [DIRECT] buton.

1. Press the [BND] button and select the
desired TV band. (TV1 or TV2)

2. To recall a stored TV station, press the
desired [DIRECT] button to select that
station.

∗ Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the current
station into the preset memory.

● Using the [DIRECT] key.

1. Press the [LIST] button or touch the screen
when the STANDARD screen is displayed,
then touch the [P.CH SELECT] key.

2. Touch the corresponding [DIRECT] key to
recall the stored station.

∗ You can select the desired band to touch the

[BAND] key.

3. Touch the [RTN] key or press the [LIST]
button to return to the previous mode.

VRX935VD 51

Owner’s manual

English

TV Operations

Manual memory

1. Select the desired station with seek tuning,
manual tuning or preset tuning.

Owner’s manual

2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station to that preset memory.

Auto store

Auto store selects 6 TV stations automatically
and stores each one into a preset memory.

If there are not 6 stations with good reception,
stations previously stored in memory remain
and only the strong stations are stored into
memory.

1. Press the [BND] button and select the
desired TV band. (TV1 or TV2)

2. Touch the screen or press the [LIST] button,
the MENU screen appears.

3. Touch the [SUB MODE] key in the MENU
screen, the [AUTO STORE] key appears in
the display.

Touch and hold the [AUTO STORE] key for 2
seconds or longer. The stations with good
reception are stored automatically to the
preset channels.

Preset scan

Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for desired TV station in memory.

1. Touch the screen or press the [LIST] button,
the MENU screen appears.

2. Touch the [SUB MODE] key in the MENU
screen, the [PRESET SCAN] key appears in
the display.

Touch the [PRESET SCAN] key to start
preset scan. The unit starts scanning each
station for 7 seconds sequentially.

3. When the desired channel is received, touch
the [PRESET SCAN] key again.

Setting the TV diver

∗ This function is enabled only when the panel is

open.

∗ Normally use the TV diver with the “ON” position.

You can change the reception setting for the TV
antenna connected to the TV tuner.

1. Press the [ADJ] button to switch to the
ADJUST MODE menu.

2. Touch the [TV] key to select “TV DIVER”.
Touch the [TV DIVER] key to display [ON]/

[OFF] key.

3. Touch the [ON] key or [OFF] key to set the
selected reception setting.

● ON:

Sets reception emphasizing the visual.

● OFF:

Sets the diver setting to OFF.

4. Press the [ADJ] button or touch the [RTN]
key to return to the previous mode.

52 VRX935VD

Other Functions

English

Always turning on the button
illumination on the operation panel

Notes:

• The following operation is enabled when the
panel is open.

• Doing this operation turns on and off the
illunination only for the buttons of VOL [+] and [–],
[DISP], and [OPEN].

The button illumination on the operation panel
when the display is turned upward, can be
switched between “ON” and “OFF”.

The factory default setting is ON.

● “OFF”: Button illumination on the operation

panel turns on for 5 seconds;

● “ON”: Button illumination is always on when

the power is turned on;

1. When the panel is open, press the [ADJ]

button to show the ADJUST MODE menu.

2. Touch the [ ]

3. Touch the [UPPER ILLUMI] key to select

“ON” or “OFF”.

4. Touch the [ON] or [OFF] key for setting.

5. Press the [ADJ] button or touch the [RTN]

key to return to the previous mode.

∗ To set “ON” again, switch “OFF” to “ON” manually.

key to select “UPPER ILLUMI”.

Entering titles

Titles up to 10 characters long can be stored in
memory and displayed for Radio stations, TV
stations and CD changer. The numbers of titles
that can be entered for each mode are as follows.

Mode

TUNER mode
TV mode

CD changer mode

CDC655z connected
CDC655Tz connected
CDC1255z connected
DCZ625 connected

∗

You cannot enter titles with the unit in Seek, Preset
Scan, Auto store (TUNER or TV) mode. Cancel
each of those operations before entering titles.

1. Press the [FUNC] button to select the mode

you want to enter a title (TUNER, CD
changer or TV).

2. Select and play a CD in the CD changer or

tune in to a Radio station or a TV station for
which you want to enter the title.

3. Touch the screen or press the [LIST] button,

the MENU screen appears.

Number of titles

30 titles
15 titles

Number of titles

60 titles

100 titles

50 titles

100 titles

4. Touch the [TITLE INPUT] key in the MENU
screen.

The title input mode display appears.

5. Touch the characters, symbols, etc. shown in
the display to input titles.

“ ” : Centering
“BS” : Backspace

“ ” : Space
“MEMO” : Memory
“z(w)” : Scroll

Notes:

• Up to 10 characters can be input.

• To switch the character types, touch the scroll key

(z) at the lower left of the display.

6. Repeat the step 4 to enter the complete title.

7. Touch the [MEMO] key for 2 seconds or
longer to store the title into memory and
cancel title input mode.

Title list play

You can display a list of titles, then select the
disc or broadcast station to listen to from that
list.

∗ You can not display a title list with the unit in

Seek, Preset Scan, Auto store (Tuner or TV)
mode. Cancel those operation modes before to
display a title list.

1. With the unit in radio, CD/MD changer or TV
mode, touch the [P. CH SELECT], [DISC
SELECT] key. A title list is displayed. The
following functions can be carried out in a
title list display.

● TUNER: A title of a station stored in the

presets 1 to 6 or frequency is displayed;

● CD/MD changer: DISC titles for discs 1 to

6 are displayed (By changing over a
display page in case of 12-CD changer,
disc 7 to 12 can be displayed). When there
is not any disc in a changer, “NO DISC” is
displayed.

● TV: A title of a channel stored in the

presets 1 to 6 or a channel number is
displayed.

2. Touch the [DIRECT] key (1 to 6) to select
one of the items 1 to 6 and reproduce the
selected broadcast station or disc.

∗ In case of 12-CD changer, touch the [DISC

SELECT] key to change over to a list display

of discs 7 to 12.

3. Touch the [RTN] key again to return to the
previous mode.

VRX935VD 53

Owner’s manual

English

Other Functions

Setting the auto dimmer

The brightness of the color LCD display is
adjusted automatically in proportion to the

Owner’s manual

surrounding light. The auto dimmer function can
switch between ON and OFF.

ON : Auto dimmer function is set.
OFF :Auto dimmer function is cancelled.

∗ The factory default setting is “ON”.

1. Press the [ADJ] button to display the
ADJUST MODE menu.

2. Touch the [AUTO DIMMER] key to select
“ON” or “OFF”.

3. Touch the [ON] or [OFF] key for setting.

4. Press the [ADJ] button or touch the [RTN]
key to return to the previous mode.

Adjusting the dimmer level

You can adjust the reduced illumination level of
the dimmer. When driving at night with the
inside of the car, the auto dimmer function can
reduce the display illumination linked “to the
illumination power supply of the car” in this
unit in order to prevent glare from the display.

∗ This function is enabled only when the auto

dimmer function is set up to “OFF”.

● The factory default:

When the car light is off: Brightest setting
When the car light is on: Medium brightness

1. When the panel is open, press the [ADJ]
button to display the ADJUST MODE menu.

2. Touch the [DIMMER LEVEL] key to adjust
the dimmer level.

3. Touch the [+] or [–] key to adjust.

4. Press the [ADJ] button again or touch the
[RTN] key two times.

The unit returns to the previous mode.

Setting the button illumination

∗ The factory default setting is “GREEN” (green).

1. When the panel is open, press the [ADJ]
button to select the ADJUST MODE menu.

2. Touch the [ ] key to select “KEY ILLUMI”.

3. Touch the [KEY ILLUMI] key to select “RED”
(red) or “GREEN” (green).

4. Touch the [RED] or [GREEN] key to select a
desired mode and set it.

5. Press the [ADJ] button again or touch the
[RTN] key. The unit returns to the previous
mode.

54 VRX935VD

Setting the beep

∗ The sound heard when you make operations is

called “beep”. The unit can be set up so that it
does not produce this beep sound.

∗ The factory default is “BEEP ON”.

1. When the panel is open, press the [ADJ]
button to select the ADJUST MODE menu.

2. Touch the [ ] key to select “BEEP”.
Touch the [BEEP] key to select “ON” and

“OFF”.

3. Touch the [ON] or [OFF] key to select a
desired mode and set it.

4.

Press the [ADJ] button again or touch the
[RTN] key, The unit returns to the previous
mode.

Setting the motion and sprite
pattern speed

∗ The factory default setting is “HIGH” (high).

1. When the panel is open, press the [ADJ]
button to select the ADJUST MODE menu.

2. Touch the [MOTION SENS] key to select
“HIGH” (high) or “MID” (mid) or “LOW” (low).

3. Touch the [HIGH] or [MID] or [LOW] key to
select a desired mode and set it.

4. Press the [ADJ] button again or touch the
[RTN] key. The unit returns to the previous
mode.

Clock Adjustment

1. When the panel is open, press the [ADJ]
button to select the ADJUST MODE menu.

2. Touch the [ ] key to select “CLOCK”.
Touch the [CLOCK] key to adjust the time.

3. Touch the [w],[z],[a.m] or [p.m] key to
adjust the time.

∗ The time is displayed in 12-hour format.

4. Press the [ADJ] button again or touch the
[RTN] key two times. The unit returns to the
previous mode.

Other Functions

Setting the visual input sound level

You can adjust an input sound level of visual1/2.

∗ The factory default setting is “HIGH”(high).

1. Press the [ADJ] button to display the
ADJUST MODE menu.

2. Touch the [ ] key to select “VISUAL AUX
SENS”.

3. Touch the [VISUAL AUX SENS] key to select
“HIGH”(high) or “MID”(mid) or “LOW”(low).

4. Touch the [HIGH] or [MID] or [LOW] key to
select desired mode and set it.

5. Press the [ADJ] button or touch the [RTN]
key to return to the previous mode.

Triggered audio mute for cellular
telepones

This unit requires special wiring to mute the
audio signal automatically when a cellular
telephone rings in the car.

∗ This function is not compatible with all cellular

telepones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.

5.1ch Surround Decoder
Operations

5.1ch Surround Decoder control
function

This function is available when a 5.1ch
Surround Decoder (DVH920) is connected.

When the 5.1ch Surround Decoder (DVH920,
sold separately) is CeNET connected, the 5.1ch
Surround Decoder Control unit (DVC920, sold
separately) cannot be used.

This section describes operation procedures only.
For other details, refer to the owner’s manual

supplied with the 5.1ch Surround Decoder.

∗ For details on functions of each mode, refer to the

owner’s manual supplied with the DVH920.

1. Press the [ADJ] button to show the ADJUST
MODE menu.

2. Touch the [SOUND] key.

English

Owner’s manual

SOUND

3. Touch the required keys to make the desired
setting.

● SPEAKER SEL (speaker sel)

This function determines center speaker,
surround speaker and sub woofer connection.

3-1 Touch the [SPEAKER SEL] key to show the

submenu.

3-2 Touch the [CENTER SP], [SURROUND SP]

or [SUB WOOFER] key and the [ON] or
[OFF] key to turn speakers on or off
depending on what speakers are connected.

• The default value is “ON”.

• The phase of the “SUB WOOFER” is
reversed in the ON- setting. The default
value is “ON+”.

VRX935VD 55

English

5.1ch Surround Decoder Operations

● PL II Control

∗ This function is available only when the MUSIC

MODE is selected for Dolby PL II . For setup

Owner’s manual

details, see “Selecting the Dolby PL II (Dolby
Pro Logic II ) type.”

3-1. Touch the [PL II CONTROL] key to show

the submenu.

3-2. Touch the [PANORAMA], [DIMENSION] or

[CENTER WIDTH] key to select respective
item.

[PANORAMA]:
Touch the [ON] or [OFF] key. “OFF” is the

default value.
[DIMENSION]:
Touch the [w] or [z] key to make

adjustments between 0 and 6. The default
value is “3”.

[CENTER WIDTH]:
Touch the [w] or [z] key to make

adjustments between 0 and 7. The default
value is “3”.

● FILTER

This function is used to select filter frequencies
that suit the speakers that are used.

∗ This function is not available for speakers whose

“SPEAKER SEL” setting is set to OFF.

3-1. Touch the [FILTER] key to show the

submenu.

3-2. Touch the [FRONT HPF], [CENTER HPF],

[SURROUND HPF] or [SUB WOOFER
LPF] key to set respective item.

3-3. Touch [w] or [z] key to make settings.

[FRONT HPF]:
This function can be set to the following

four settings: 50 Hz, 80 Hz, 120 Hz or
THROUGH. “THROUGH” is the default
value.

[CENTER HPF]:
This function can be set to the following

three settings: 50 Hz, 80 Hz and 120 Hz.
“120 Hz” is the default value.

[SURROUND HPF]:
This function can be set to the following

four settings: 50 Hz, 80 Hz, 120 Hz or
THROUGH. “THROUGH” is the default
value.

[SUB WOOFER LPF]:
This function can be set to the following

three settings: 50 Hz, 80 Hz and 120 Hz.
“120 Hz” is the default value.

● SPEAKER GAIN

This function sets speaker output level.

∗ This function is not available for speakers whose

“SPEAKER SEL” setting is set to OFF.

3-1. Touch the [SPEAKER GAIN] key to show

the submenu.

3-2. Touch the [FRONT L], [CENTER],

[FRONT R], [SURROUND R],
[SURROUND L] or [SUB WOOFER] key
to set respective item.

3-3. Touch the [w] or [z] key to make

adjustments in the range -10 dB to +10 dB
in 1 dB step increments. The default value
is “0 dB”.

● DELAY

This function adjusts the timing of the speakers
so that they are synchronized with front speaker
output.

∗ This function is not available for speakers whose

“SPEAKER SEL” setting is set to OFF.

3-1. Touch the [DELAY] key to show the

submenu.

3-2. Touch the [CENTER SP] or [SURROUND

SP] key to set respective item.

3-3. Touch the [w] or [z] key to adjust.

[CENTER SP]:
Adjustments are made in the range 0 ms

to 5 ms. The default value is “0 ms”.
[SURROUND SP]:
Adjustments are made in the range 0 ms

to 15 ms. The default value is “0 ms”.

● DOLBY D

This function sets the dynamic range
compression.

∗ This function is not available for speakers whose

“SPEAKER SEL” setting is set to OFF.

3-1. Touch the [DOLBY D] key to show the

submenu.

3-2. Touch the [MAX], [STD] or [MIN] key to

select respective item.

∗ The default value is “MAX”.

4. When all settings are completed, press the
[ADJ] button or touch the [RTN] key to
return to the previous mode.

56 VRX935VD

5.1ch Surround Decoder Operations

English

Output adjustment of subwoofer
volume, center volume and balance/
fader

1. Press the [A-M] button and touch the
[DETAIL] key.

2. To make an adjustment on :

● Subwoofer volume adjustment

2-1. Touch the [SUBWOOFER VOL] key, then

touch the [w] or [z] key to adjust to
desirable level.

∗ The factory default setting is “0”. (Setting

range : -6 to 3)

● Center volume adjustment

2-1. Touch the [CENTER VOL] key, then touch

the [w] or [z] key to adjust to desirable
level.

∗ The factory default is “0”. (Setting range : -6

to 0)

● Balance/Fader adjustment

2-1. Touch the [BAL/FAD] key.

Touch the [w] or [z] key to adjust the balance
level.

[w] key: emphasized the sound from the

front speakers.

[z] key: emphasized the sound from the

rear speakers.

2-2. Touch the [Å] or [Î] key to adjust the fader

level.
[Å] key : emphasized the sound from the

left speakers.

[Î] key : emphasized the sound from the

right speakers.

3. When the adjustment is complete, touch the
[RTN] key or press the [A-M] button to return
to the STANDARD screen.

DSF mode

DSF effect ON/OFF

∗ The factory default setting is “OFF”.

1. Press the [A-M] button.

2. Touch the [STATUS] key.

3. Touch the [DSF] key to select “on” and “off”.

4. Each time the [ON/OFF] key is touched, the
on and off statuses are switched alternately.

5. After the setting, press the [A-M] button
again or touch the [RTN] key to return to the
STANDARD screen.

Note:

•

If the DSF effect is set to OFF, the adjustment
made in “DSF” is not reflected in the music source.

Selecting the DSF type

1.

Press the [A-M] button and touch the [DSF] key.

2. Touch the key for the desirable type to select it.

3. When the setting is finished, touch the [RTN]
key or press the [A-M] button to return to the
previous mode.

P.EQ mode

P.EQ effect ON/OFF

∗ The factory default setting is “OFF”.

1. Press the [A-M] button.

2. Touch the [STATUS] key.

3. Touch the [P.EQ] key to select “on” and “off”.

4. Each time the [ON/OFF] key is touched, the
on and off statuses are switched alternately.

5. After the setting, press the [A-M] button
again or touch the [RTN] key to return to the
STANDARD screen.

Note:

• If the P.EQ effect is set to OFF, the adjustment

made in “P.EQ” is not reflected in the music
source.

Owner’s manual

VRX935VD 57

English

5.1ch Surround Decoder Operations

Setting and storing P.EQ Properties

1. Press the [A-M] button to show the AUDIO
MODE menu.

Owner’s manual

2. Touch the [P.EQ] key to show the P.EQ
adjusting display.

3.

Touch the key for the desirable type to select it.
The P.EQ adjustment contents are as

follows:

● SIGNAL

∗ The factory default setting is “P.NOISE”.

This function selects [P. NOISE] or [MUSIC].

● SPEAKER SELECT

∗ The factory default setting is “FRONT”.

This function selects [FRONT], [CENTER] or
[SURROUND].

● “BAND”

∗ The factory default setting is “BAND1”.

Select the channel to be compensated
(BAND1, BAND2, BAND3).

● “FREQUENCY”

∗ The factory default setting is “1 kHz”.

Select the center frequency that you want to
compensate from the range of 20 Hz to 20
kHz. (1/3 octave step, 31 points)

● “Q”

∗ The factory default setting is “1”.

Set the sharpness of the Q-curve to one of
the parameters: 1, 3, 5, 7 and 20.

● “GAIN”

∗ The factory default setting is “0”.

Adjust the gain (output level) in the range of ­12 dB to +12 dB. (1 dB step, 25 points)

4. After making adjustments to a desired
pattern by repeating the operations of item3,
touch the [RNT] key or press the [A-M]
button to return to the previous mode.

Selecting the Dolby PLII (Dolby Pro
Logic II) type

1. Press the [A-M] button and touch the [Dolby
PLII ] key.

2.

Touch the key for the desirable type to select
it.

3. When the setting is finished, touch the [RTN]
key or press the [A-M] button to return to the
previous mode.

∗ The factory default is “off”.

58 VRX935VD

12. IN CASE OF DIFFICULTY

Problem Cause Measure

Power does not
turn on.
(No sound is
produced.)

Nothing happens
when buttons are
pressed.

Display is not
accurate.

GENERAL

The remote
controller does
not work.

Disc cannot be
loaded.

Fuse is blown.

Incorrect wiring.

The microprocessor has
malfunctioned due to noise,
etc.

Direct rays of the sun fall on
the light-receptive part of the
remote controller.

The batteries of the remote
controller unit are dead or
there is no battery in the
remote controller unit.

Another disc is already
loaded.

There is a foreign matter
already in place.

Replace with a fuse of the same amperage. If the
fuse blows again, consult your store of purchase.

Consult your store of purchase.

Turn off the power, then press the [RELEASE] lever
and remove the DCP.
Press the reset button both of tuner amp unit and
main unit for about 2 seconds with a thin rod.
Note: When the reset button is pressed, turn off the

ACC power.

Tuner Amp Unit Main Unit

The Reset button

∗ When the reset button is pressed, frequencies of

TV/radio stations, titles, etc. stored in memory are
cleared.

When direct rays of the sun fall on the light-receptive
part of the remote controller, it may not work.

Check the batteries of the remote controller unit.

Eject the disc before loading the new one.

Eject the foreign matter forcibly.

English

Owner’s manual

The Reset button

Sound skips or is
noisy.

Sound is bad

DVD Player

directly after power
is turned on.

Disc cannot play
with the display
“PARENTAL
VIOLATION”
shown.

Compact disc is dirty.

Compact disc is heavily
scratched or warped.

Water droplets may form on
the internal lens when the car
is parked in a humid place.

The view is limited.

Clean the compact disc with a soft cloth.

Replace with a compact disc with no scratches.

Let dry for about 1 hour with the power on.

Release the view limitation or change the parental
level.
See the subsection “Setting up the parental level”.

VRX935VD 59

English

Owner’s manual

TV

Problem Cause Measure

The image is not
displayed.

The display is
dark.

The color of the
display is light or
a shade of color
is not good.

When the VTR is
connected, the
image is
disturbed.

When the TV
tuner is
connected, the
image gets
unclear.

The TV tuner has
a double or triple
image.

The TV tuner has
spots or stripes in
the image.

There are red,
green, and blue
points in the
display.

The parking brake is not
pulled.

The brightness control is too
low.

The operating condition is
not good.

The headlight of the vehicle
is lit.

The color is not adjusted
adequately.

Improper NTSC/PAL setting

Bad receiving condition

Bad receiving condition

Presence of jamming

Check that the parking brake is applied.

Adjust the brightness properly.

The temperature inside the vehicle may be 0˚C or
less. Set to an appropriate temperature (25˚C or so)
and check it again.

The display is made dark at night to prevent the
glare (When the headlight of the vehicle is lit in the
daytime, the display gets dark).

Check that COL and HUE are adjusted properly.

Set the NTSC/PAL properly according to the VTR.

A radio wave may not reach sufficiently due to
obstruction of mountains or buildings. Check it again
at a place where a radio wave can be received
properly.

It may be under the influence of radio wave reflected
by mountains or buildings. Check it again after
changing place or direction.

It may be under the influence from automobiles,
streetcar, power cable, neon sign, and so forth.
Check it again after changing place.

This is not a failure, but a phenomenon peculiar to a
liquid crystal panel (The LCD panel is produced
according to technology with very high precision.
Note that, though there are effective pixels of

99.99% or more, pixel missing or normally lit pixels
account for 0.01%).

60 VRX935VD

13. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.

Error Display

ERROR 2

ERROR 3

ERROR 6

DVD PLAYER

ERROR 2

ERROR 3

ERROR 6

CD CHANGER

ERROR H

ERROR 2

ERROR 3

MD CHANGER

ERROR 6

A CD is caught inside the CD deck and is
not ejected.

A CD cannot be played due to scratches,
etc.

A CD is loaded upside-down inside the CD
deck and does not play.

A CD inside the CD changer is not loaded.

A CD inside the CD changer cannot be
played due to scratches, etc.

A CD inside the CD changer cannot be
played because it is loaded upside-down.

Displayed when the temperature in the
MD changer is too high and playback has
been stopped automatically.

An MD inside the MD changer is not
loaded.

An MD inside the MD changer cannot be
played due to scratches, etc.

An MD inside the MD changer cannot be
played because it is loaded upside-down.

Displayed when a non-recorded MD is
loaded in the MD changer.

Cause Measure

This is a failure of CD deck’s mechanism
and consult your store of purchase.

Replace with a non-scratched,
non-warped-disc.

Eject the disc then reload it properly.

This is a failure of CD changer’s mecha­nism and consult your store of purchase.

Replace with a non-scratched, non­warped-disc.

Eject the disc then reload it properly.

Lower the surrounding temperature and
wait for a while to cool off MD changer.

This is a failure of MD changer’s mecha­nism and consult your store of purchase.

Replace with a non-scratched, non­warped-disc.

Eject the disc then reload it properly.

Load a pre-recorded MD in the MD
changer.

English

Owner’s manual

For the DVD changer, refer to the Owner’s Manual provided with the DVD changer.
If an error display other than the ones described above appears, press the RESET button. If the

problem persists, turn off the power and consult your store of purchase.

∗ When the reset button is pressed, frequencies of TV/radio stations, titles, etc. stored in memory are cleared.

VRX935VD 61

English

172 mm
178 mm

50 mm

37.5 mm

178 mm

165 mm

30 mm

209.5 mm

Main unit

Tuner amp unit

14. SPECIFICATIONS

FM Tuner

Frequency Range: 87.50 MHz to 108.0 MHz

Owner’s manual

Usable Sensitivity: 9 dBf
50dB Quieting Sensitivity: 15 dBf
Alternate Channel Selecitivity: 70 dB
Stereo Separation(1 kHz): 35 dB
Frequency Response(+/-3 dB): 30 Hz to 15 kHz

AM Tuner

Frequency Range: 531 kHz to 1629 kHz
Usable Sensitivity: 25 µV

DVD player

System:

Digital Versatile Disc System with CDDA

capable
Usable discs: DVD video disc, Compact disc
Frequency Response:

20Hz to 22 kHz (48 kHz) (±1 dB)

20Hz to 20 kHz (CD) (±1 dB)
Signal to Noise Ratio: 100 dB (1 kHz) IHF-A
Dynamic Range: 100 dB (1 kHz)
Distortion: 0.01%

Audio Amplifier

Rated power output:

18 W × 4 (20 Hz to 20 kHz, 1%, 4 Ω)
Maximum power output:

212 W (53 W × 4)
Speaker impedance: 4 Ω (4 to 8 Ω)

Input

Audio input:

130 ±60mVrms (High)

600 ±80mVrms (Mid)

840 ±100mVrms (Low)

(input impedance 10kΩ or greater)
Video input:

1.0 ± 0.2 Vp-p (input impedance 75 Ω)

Video output

Video output:

1.0 ± 0.2 Vp-p (output impedance 75 Ω)

LCD Monitor

Screen Size: 7-inch wide type

152 mm Width × 85 mm Height
Display method:

Transmission type TN liquid crystal display
Drive method: TFT (thin-film transistor)

active matrix driving

Pixels: 336,960 (1440 × 234)

General

Power source voltage:

14.4 V DC (10.8 to 15.6 V allowable)
Ground: Negative
Current consumption: 4.0 A (1 W)
Auto Antenna Rated Current: 500 mA less
Dimensions of the Main Unit:

178 mm Width × 50 mm Height ×
165 mm Depth

Dimensions of the Tuner Amp Unit:

178 mm Width × 37.5 mm Height ×

209.5 mm Depth
Weight of the Main Unit: 2.3 kg
Weight of the Tuner Amp Unit: 1.1kg
Dimensions of the Remote Control Unit:

54 mm Width × 28.8 mm Height ×
155 mm Depth

Weight of the Remote Control Unit:

100 g (including battery)

Notes:

• Specifications comply with JEITA Standards.

• Specifications and design are subject to change

without notice for further immprovement.

62 VRX935VD

VRX935VD

Installation and Wire connection manual

■ Contents

1. BEFORE STARTING ............................................................... 63

2. PACKAGE CONTENTS ........................................................... 63

3. GENERAL CAUTIONS ............................................................ 64

4. CAUTIONS ON INSTALLATION .............................................. 64

5. INSTALLING THE MAIN UNIT................................................. 65

6. REMOVING THE MAIN UNIT .................................................. 67

7. CAUTIONS ON WIRING .......................................................... 67

8. WIRE CONNECTION .............................................................. 68

9. SAMPLE SYSTEMS ................................................................ 71

1. BEFORE STARTING

1. This set is exclusively for use in cars with a
negative ground 12 V power supply.

2. Read these instructions carefully.

3. Be sure to disconnect the battery “-” termi-
nal before starting. This is to prevent short
circuits during installation. (Figure 1)

Car battery

English

Installation and Wire

connection manual

2. PACKAGE CONTENTS

1 Main unit
2 Tuner Amp unit
3 Manuals

Owner’s manual & Installation manual
Warranty card

4 Power supply lead (For the main unit)
5 Power supply lead (For the tuner amp

unit)

6

Connection cord (Main unit ↔ Tuner amp unit)

7 Antenna extension cord
8

Bag for accessories of the main unit (No. 1)

Flat head screw (M5 × 8) ............................ 4

Sems hexagonal bolt (M5× 8) ..................... 5

Electro tap

Machine screw (M4× 3) ............................... 4

Figure 1

9

Bag for accessories of the main unit (No. 2)

Hook plate ................................................... 2

Cord clamp
Rubber cap
Special screw

0 Bag for accessories of tuner amp unit

Maunting bracket ......................................... 2

Canoe clip ................................................... 4

Machine screw (M4 × 8) .............................. 4

! Universal mounting bracket
@ Remote control unit
# Battery

(for remote control unit)

$ Outer Escutcheon
% DCP Case

VRX935VD 63

English

T

NNT

NT

3. GENERAL CAUTIONS

1. Do not open the case. There are no user ser­viceable parts inside. If you drop anything

Installation and Wire

connection manual

into the unit during installation, consult your
dealer or an authorized Clarion service cen­tre.

4. CAUTIONS ON INSTALLATION

1. Prepare all articles necessary for installing
the main unit before starting.

2. This model is used with the LCD panel slid
forwards (shell loading system). On some
types of cars, the LCD panel may touch the
dashboard or shift lever, in which case it can­not be installed. Check that the set will not
hamper operation of the shift lever before
choosing the place of installation.(Figure 2)

Dashboard

Shift lever
(check that it does not
touch the LCD.)

3. Install the unit within 30° of the horizontal
plane. (Figure 3)

Figure 2

Shift lever

2. Use a soft, dry cloth to clean the case. Never
use a rough cloth, thinner, benzine, or alco­hol, etc. For tough dirt, apply a little cold or
warm water to a soft cloth and wipe off the
dirt gently.

5. Use the enclosed screws for installation. Us­ing other screws can cause damage. (Figure

4)

Chassis Chassis

Damage

Max. 8 mm (M5 screw)

Figure 4

6. The source unit has mounting screw holes
for NISSAN (N marks) and TOYOTA (T
marks) vehicles.

Figure 5

Max. 30˚

Figure 3

4. If you have to do any work on the car body,
such as drilling holes, consult your car dealer
beforehand.

64 VRX935VD

5. INSTALLING THE MAIN UNIT

■ Universal Mount

1. Place the universal mounting bracket into the
instrument panel, use a screwdriver to bend
each stopper of the universal mounting
bracket inward, then secure the stopper as
shown in Figure 6.

2. Wire as shown in Section 8.

3. Insert the main unit into the universal mount­ing bracket until it locks.

4. Mount the outer escutcheon so that all the
hooks are locked.

• Console opening dimensions

182 mm

Notes:

1) Some car models require special mounting kits
for proper installation. Consult your Clarion
dealer for details.

2) Fasten the front stopper securely to prevent the
main unit from coming loose.

Rear fastening hole (of vehicle)

English

Installation and Wire

connection manual

Hole

Screwdriver

Outer escutcheon

53 mm

Main unit

Note:

Instrument panel

Hole

Stoppers

Special Screw

2-Spring

Set the outer escutch­eon so that its metallic
part on the back side
fits the upper edge of
the main unit.

Rubber cap

Universal mounting bracket

Stoppers

Figure 6

VRX935VD 65

■ Fixed Mount (TOYOTA, NISSAN and other ISO/DIN equipped vehicles)

English

This unit is designed for fixed installation in the
dashboard.

If the vehicle is equipped with a factory-installed
radio, install the main unit with the parts and

Installation and Wire

connection manual

screws marked (∗). (Figure 8)
If the vehicle is not equipped with a factory-in-

stalled radio, obtain an installation kit to install
the main unit in the following procedure.

1. Remove the screws from both side of the
main unit. Then, at either side, lift the leaf
spring until the engaging claws are released
from the holes, and slide the spring to the di-

rection of arrow to remove it. Repeat the
same for the other side to remove the
springs from the both sides. (Figure 7)

2. Secure the mounting brackets to the chassis
as shown in Figure 8. Holes are pre-tapped
for TOYOTA and NISSAN vehicles; modifica­tion, such as drilling new holes, of the mount­ing brackets may be required for other mod­els.

3. Wire as shown in Section 8.

4. Secure the unit in the dashboard, and then
reassemble the dashboard and the centre
panel.

Main Unit

2-Spring

4-Hexagonal screw ∗ (M5 × 8)

Centre Panel (Note 1)

∗: The screws with this mark are

enclosed in this set.

★: The parts and screws with this mark

are used to install radio or included in
the installation kit.

Screwdriver

2-Screw

Figure 7

Mounting bracket
(1 pair for the left and right sides)

Main Unit

Pocket

Note 2

Figure 8

Engagin claw

Note 1:

In some cases, the centre panel may require
some modification (trimming, filling, etc.).

66 VRX935VD

Note 2: If a hook on the installation bracket inter-

feres with the unit, bend and flatten it with
a nipper or a similar tool.

6. REMOVING THE MAIN UNIT

English

1. When the rear of the main unit has been se­cured with the method shown in Figure 6 un­fasten the special screw.

2. Remove the outer escutcheon.

3. Insert the hook plate between the spring and
the universal mounting bracket, fit tab B of
the spring into hole A of the hook plate, then

Universal mounting bracket

2-Hook plate

Outer escutcheon

pull the main unit out by the hook plate. (In­sert both the right and left edges of the hook
plate.) (Figure 9)

Note:

AB

Figure 9

Keep the hook plate. You cannot remove the
main unit without disengaging the hook plate.

Instrument panel

Main
Unit

Spring

Installation and Wire

connection manual

7. CAUTIONS ON WIRING

1. Be sure to turn the power off before wiring.

2. Be particularly careful where you route the
wires.

Keep them well away from the engine, and
exhaust pipe, etc. Heat may damage the
wires.

3. If the fuse should blow, check to see if the
wiring is correct.

If it is, replace the fuse with a new one with
the same amperage rating as the original.

4. To replace the fuse, remove the old fuse of
the power supply lead and insert the new
one. (Figure10)

∗ Power supply lead for the tuner amp unit : 15A

FUSE

∗ Power supply lead for the main unit : 3A FUSE

Note:

There are various types of fuse holder. Do not
let the battery side touch other metal parts.

CAUTION

After the connection, fix the lead by a clamp or
insulation tape for protection.

Fuse

Fuse holder

Figure 10

VRX935VD 67

English

¥∗2$%

∗6

&

Securely connect to the
metal part of the car with a
screw, etc.

CeNET cable (Sold separately)

Reset switch

Front audio output (input) terminal L+R (RCA) ∗4

Non Fader output terminal L+R (RCA)

VISUAL 1 video input (RCA)/

DVD changer input (RCA)

TV TUNER input (RCA)

Top view of the
tuner amp unit

VIDEO output (RCA) ∗5

VISUAL 1 audio input

terminal L+R (RCA)

Rear audio output (input) terminal L+R (RCA) ∗4

Power supply lead

Power supply lead

Choke coil

Main power supply cord

Black

Yellow

Fuse

5.1ch Surround Decoder select switch ∗3

Connection cord
(provided with this unit)

Main unit

8. WIRE CONNECTION

Installation and Wire

connection manual

68 VRX935VD

(

Purple/Black

Purple

Green/Black

Blue/White

Green

Brawn

Glay

Grass-green

Glay/Black

Orange/White

White/Black

Red

White

Yellow

Black

Blue

0

*∗1

)

2

1

8

7

3

No. Description

4

!

6

@

5

9

#

¡

1 REAR RIGHT
2 REAR RIGHT
3 FRONT RIGHT
4 FRONT RIGHT
5 FRONT LEFT
6 FRONT LEFT
7 REAR LEFT
8 REAR LEFT
9 +12 V MAIN POWER
0 Amplifier turn-on lead
! ILLUMINATION
@ +12 V ACCESSORY
# GROUND
$ CCD camera
% VISUAL 2 terminal
¥ Radio antenna jack (∗2)
& CeNET terminal
* Phone mute (Brown) (∗1)
( Spare terminal (Yellow)
) Parking brake (Grass-Green)
¡ AUTO ANTENNA

English

Installation and Wire

connection manual

+

­+

-

+

-

+

-

∗1: Connecting the PHONE MUTE Terminal

The lead included with the unit must be connected to the specified position of the vehicle’s
connector in order to use the “triggered audio mute for cellular telephones” function.

∗2: Use the attached extension lead when necessary. (Provided with this unit)

Note : Before making any installation, disconnect the car battery - (negative) cable.

∗3: If a 5.1ch Surround Decoder (DVH920, sold separately) is connected and the amp of this unit is

used, set the select switch to “LINE IN”. Then the AUDIO OUT (IN) terminal of the Tuner Amp
Unit is only available for audio input, not outputting the audio.

(LINE IN) D N (LINE OUT)

∗4: Connect to a separately sold external amplifier with a separately sold RCA cord (L, R).

Note : When the 5.1ch Surround Decoder is connected, these terminals are only available for audio input.

∗5: Connect to a Rear View Monitor (sold separately) for the rear seat.
∗6: Connect to separately sold VTR equipment with a separately sold connection cord.

VRX935VD 69

■ Connecting the Accessories

English

• Connection to the external amplifier

The external amplifier can be connected unless the 5.1ch Surround Decoder is connected. For
detailed information, refer to the instruction manual of the 5.1ch Surround Decoder.

Installation and Wire

connection manual

• Connection to the CCD camera for vehicle

The CCD camera for vehicle can be connected to the CCD terminal on the tuner amp unit. For
detailed information, refer to the instruction sheet or manual for the CCD camera.

Notes:

• A power supply box (sold separately) is required for connection of the main unit and the CCD camera.

• The power supply box for camera CAA147 cannot be used. Please use the CAA188 instead.

• If the specified lead of the cellular phone is connected to the phone mute
lead of the source unit, the audio mute is available when the cellular
telephone is used.

• TV Tunner

When the TV TUNER is to be connected, connect the CeNET connector and RCA PIN (yellow). For
detailed information, refer to the instruction manual of the TV TUNER.

■ Connecting the parking brake lead

Connect the lead to parking brake lamp earth
in the meter panel.

Notes:

• Connecting the parking brake lead to lamp earth

allows you to watch TV/VTR/DVD video/video
CD when the parking brake is engaged.

• When the parking brake lead is not connected,

the monitor will stay off.

70 VRX935VD

Parking brake lamp

- cord
parking
brake signal
lead

Parking brake

+ lead to battery

Connect these three leads.

Parking brake lead
(bright green)

9. SAMPLE SYSTEMS

■ Sample System 1

MAIN UNIT
VRX935VD

RCA Cable

(Visual)

English

Installation and Wire

connection manual

VTR

Rear view

monitor

Front Speaker

VISUAL 2 IN

CCA-389

RCA Cable

(Visual)

Rear Speaker

TUNER AMP

UNIT

Tuner IN

CeNET

VISUAL 1 IN

RCA Cable (Visual)

CCA-519-500

TTX7501z

TTX7503z/TTX7504z

(CeNET TV TUNER)

CeNET

VCZ625

(DVD CHANGER)

CeNET Mode*

*Switch the MODE switch

to the CeNET mode.

DCZ625

(CD CHANGER)

VRX935VD 71

■ Sample System 2

English

Installation and Wire

connection manual

MAIN UNIT
VRX935VD

VISUAL 2 IN

VTR

Rear view

monitor

Front Speaker

CCA-389

RCA Cable

(Visual)

TUNER AMP

Rear Speaker

UNIT

(included the SRK601)

RCA Cable (sold separately)

RCA Cable

(Gray)

(included the DVH920)

RCA Cable

(Visual)

Tuner IN

CeNET

VISUAL 1 IN

RCA Cable

(Visual)

Set the select switch to
"(LINE IN)D".

(included the VCZ625)

RCA Cable (Visual)

Optical Digital Cable

TTX7501z

TTX7503z/TTX7504z

(CeNET TV TUNER)

(LINE IN)D

N(LINE OUT)

DVH920

(5.1ch Surround

Decoder)

CeNET Mode∗

(included the VCZ625)

CeNET

CeNET (included

the DVH920)

(Black)

Optical Digital Cable

(sold separately,

DCA-005/008)

72 VRX935VD

SRK602

(Center Speaker)

SRV303

(Powered Sub

Woofer)

VCZ625

(DVD CHANGER)

CeNET Mode∗

∗ Switch the MODE switch

to the CeNET mode.

(Gray)

■ Sample System 3

MAIN UNIT
VRX935VD

English

Installation and Wire

connection manual

VTR

Rear view

monitor

VISUAL 2 IN

CCA-389

RCA Cable

(Visual)

Amplifier

TUNER AMP

UNIT

(LINE IN)D

Set the select switch to
"N(LINE OUT)".

RCA cable

RCA cable

N(LINE OUT)

(included the SRK601)

RCA Cable

(Gray)

RCA Cable

(Visual)

Tuner IN

Optical Digital Cable

(included the DVH920)

TTX7503z/TTX7504z

(CeNET TV TUNER)

CeNET

VISUAL 1 IN

RCA Cable (Visual)

DVH920

(5.1ch Surround

Decoder)

RCA Cable (sold separately)

(included the VCZ625)

CeNET Mode

RCA Cable (Visual)

TTX7501z

∗

(included the VCZ625)

CeNET

DCA-005/008)

(Black)

Optical Digital Cable

(sold separately,

Front Speaker

Rear Speaker

SRK602

(Center Speaker)

SRV303

(Powered Sub

Woofer)

VCZ625

(DVD CHANGER)

CeNET Mode∗

∗ Switch the MODE switch

to the CeNET mode.

VRX935VD 73

(Gray)