Clarion DB179RMP, DB179RGMP, DB178RMP User Manual

Ownerʼs manual
Mode dʼemploi
Bedienungsanleitung
Istruzioni per lʼuso
Gebruiksaanwijzing
Manual de instrucciones
Bruksanvisning
Manual de instruções
CD/MP3/WMA RECEIVER
CD/MP3/WMA-RECEIVER
RICEVITORE PER CD/MP3/WMA
CD/MP3/WMA-RECEIVER
RADIO CD/MP3/WMA
CD/MP3/WMA-LÄSARE
RECEPTOR CD/MP3/WMA
Thank you for purchasing this Clarion product.
Please read this ownerʼs manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual.
CAUTIONS:
This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT”. To use this model properly, read this Owner’s Manual carefully and keep this manual for your future reference. In case of any trouble with this player, please contact your nearest “AUTHORIZED service station”. To prevent direct exposure to the laser beam, do not try to open the enclosure.
!CAUTION
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RA­DIATION EXPOSURE.
ADVARSEL.
Denne mærking er anbragt udvendigt på ap­paratet og indikerer, at apparatet arbejder med laserstråler af klasse 1, hvilket betyder, at der anvendes laserstråler af svageste klasse, og at man ikke på apparatets yderside kan blive udsat for utilladelig kraftig stråling. APPARATET BØR KUN ÅBNES AF FAGFOLK MED SÆRLIGT KENDSKAB TIL APPARATER MED LASERSTRÅLER!
Indvendigt i apparatet er anbragt den her gengivne advarselsmækning, som advarer imod at foretage sådanne indgreb i appara­tet, at man kan komme til at udsaætte sig for laserstråling.
OBS!
Apparaten innehåller laserkomponenten som avger laserstrålning överstigande gränsen för laserklass 1.
VAROITUS
Suojakoteloa si saa avata. Laite sisältää la serdiodin, joka lähettää näkymätöntä silmille vaarallista lasersäteilyä.
-
DB178RMP / DB179RMP / DB179RGMP
2
Contents
1. PRECAUTIONS .............................................................................................................................. 3
Handling Compact Discs .................................................................................................................. 4
2. CONTROLS
MAIN UNIT ....................................................................................................................................... 5
3. NOMENCLATURE
Names of the Buttons and Their Functions ...................................................................................... 6
Display Items ................................................................................................................................... 7
LCD Screen ..................................................................................................................................... 7
4. DCP
5. OPERATIONS
Basic Operations ............................................................................................................................. 9
Radio Mode Operations ................................................................................................................. 12
RDS Operations ............................................................................................................................. 13
CD/MP3/WMA Mode Operations ................................................................................................... 15
6. OTHER OPERATIONS
7. TROUBLESHOOTING
8. ERROR DISPLAYS
9. SPECIFICATIONS
.................................................................................................................................... 5
.......................................................................................................................... 6
(
Detachable Control Panel) .................................................................................................. 8
................................................................................................................................. 9
................................................................................................................. 21
.................................................................................................................. 24
...................................................................................................................... 25
........................................................................................................................26
1. PRECAUTIONS
English
1. When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation.
INFORMATION FOR USERS:
CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFAC­TURER WILL VOID THE WARRANTY.
2. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip.
3. This unit uses a prec isio n mechanism. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts.
DB178RMP / DB179RMP / DB179RGMP
3
Handling Compact Discs
This unit has been designed specifically for playback of compact discs bearing the mark. No other discs can be played.
To remove the compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.
Always handle the compact disc by the edges. Never touch the surface.
To remove fingermarks and dust, use a soft cloth, and wipe in a straight line from the center of the compact disc to the circumference.
New discs may have some roughness around the edges. The unit may not work or the sound may skip if such discs are used. Use a ball-point pen, etc. to remove roughness from the edge of the disc.
Note on compact discs
Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen.
Do not use any solvents such as commercially available cleaners, anti-static spray, or thinner to clean compact discs.
Do not use compact discs that have large scratches, are misshapen, or cracked, etc. Use of such discs will cause misoperation or damage.
Do not expose compact discs to direct sunlight or any heat source.
Note: Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These
may get caught in the internal mechanism and damage the disc.
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.
Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.
Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.
DB178RMP / DB179RMP / DB179RGMP
4
Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.
English Français Deutsch Italiano
CONTROLS / LES COMMANDES / REGLER
2.
/ CONTROLLI / REGELAARS / CONTROLES / KONTROLLER / CONTROLOS
MAIN UNIT / APPAREIL PRINCIPAL / HAUPTGERÄT
/ APPARECCHIO PRINCIPALE / HOOFDTOESTEL / UNIDAD PRINCIPAL / HUVUDENHET / UNIDADE PRINCIPAL
Nederlands
Español Svenska
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapital die Frontdiagramme beachten.
Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.
Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.
Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.
Português
DB178RMP / DB179RMP / DB179RGMP
5
English
3. NOMENCLATURE
Note:
Be sure to read this chapter referring to the front diagrams of chapter “
Names of the Buttons and Their Functions
2. CONTROLS” on page 5 (unfold).
[
RELEASE] button
Press the
detachable panel.
[ ]
Eject a CD when it is loaded in the unit.
[D]
button
During Radio RDS mode, switch the display
indication in the following order: Main Display Clock Display Main Display... During CD/AUX mode, switch the display
indication During MP3/WMA mode, switch the display
indication in the following order: Track No./Play Time Folder No./Play Time
Track Name Folder Name Title Tag
Album Tag Artist Tag Clock Display
Track No./Play Time... Press and hold the button for 1 second or longer
to enter the Adjustment mode.
[ ]
button
Use the button to enter to the Sound mode.
(
Z-Enhancer, Bass, Treble, Balance, Fader
Press and hold for 1 second or longer to turn
on or off the M-B EX mode.
[TA]
button
U s e the b u t t on to s e t the TA
Announcement) standby mode.
[
DIRECT] buttons
Store a station into memory or recall it directly
while in the Radio mode.
[
SCN] button
Perform scan play for 10 seconds of each track
while in the CD/MP3/WMA mode. Press and hold the button for 1 second or longer
to perform all scan play while in the MP3/WMA
mode.
[
RPT] button
Repeat play while in the CD/MP3/WMA mode. Press and hold the button for 1 second or longer
to perform all repeat play while in the MP3/WMA
mode.
[
RELEASE] button to unlock the
button
(
Main Display, Clock Display
)
.
(
Tr a f f i c
)
.
[
RDM] button
Perform random play while in the CD/MP3/WMA
mode.
Press and hold the button for 1 second or
longer to perform all random play while in the MP3/WMA mode.
[UP], [DN]
Select the folder
[
], [ ] buttons
Seek a station while in the Radio mode or select
a track when listening to a CD. These buttons are used to make various settings.
Press and hold the button for 1 second or longer
to enter the fast-forward or fast-backward in CD/MP3/WMA mode.
[
] button
Perform preset scan while in the Radio mode. Press and hold the button for 2 seconds or
longer to perform auto store.
Play or pause a track while in the CD/MP3/WMA
mode.
Perform second level adjustment or selection.
[
SRC] button
Press the button to turn on the power. Press and hold the button for 1 second or longer
to turn off the power.
Switch the Operation mode among the Radio
mode, CD/MP3/WMA mode and AUX mode.
[
BND] button
Switch the band, or seek tuning or manual
tuning while in the Radio mode.
Play the first track while in the CD/MP3/WMA
mode.
Press and hold the button for 1 second or
longer to select CD-DA or MP3/WMA on a Multi­session disc.
[
ROTARY
Adjust the volume by turning the knob clockwise
or counterclockwise.
Use the knob to perform various settings.
buttons
]
knob
(
MP3/WMA disc only
)
.
DB178RMP / DB179RMP / DB179RGMP
6
Names of the Buttons and Their Functions
English
[
CD SLOT
CD insertion slot.
]
Display Items
[
AUX] input
Auxiliary jack insertion.
LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal. The screen will recover when it returns to normal temperature.
DB178RMP / DB179RMP / DB179RGMP
7
English
4. DCP (Detachable Control Panel
)
The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP prevent scratches.
We recommend taking the DCP with you when leaving the car.
(
Detachable Control Panel) case to
Removing the DCP
1. Press the to switch off the power.
2. Press in the
The DCP is unlocked
3. Remove the DCP.
[
SRC] button for 1 second or longer
[
RELEASE] button.
Storing the DCP in the DCP case
Hold the DCP, in the orientation as shown in the figure below, and put it into the supplied DCP case. (
Ensure the DCP is in the correct orientation.
CAUTION
!
The DCP can easily be damaged by impact.
After removing it, be careful not to drop it or subject it to strong shocks.
When the Release button is pressed and
the DCP is unlocked, the carʼs vibrations may cause it to fall. To prevent damage to the DCP, always store it in its case after detaching it.
The connector connecting the main unit and
the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
(
See figure above.
)
)
Attaching the DCP
1. Insert the right side of the DCP into the main unit.
2. Insert the left side of the DCP to attach into the main unit.
DB178RMP / DB179RMP / DB179RGMP
8
Note:
If the DCP connector is dirty, wipe off the dirt with
a soft, dry cloth only.
5. OPERATIONS
Basic Operations
English
Note: Be sure to read this chapter referring to the front diagrams of
chapter “2. CONTROLS” on page 5 (unfold).
CAUTION
!
Be sure to lower the volume before switch­ing off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sud den loud volume may hurt your hearing and damage the unit.
Turning on/off the power
Note:
Be careful about using this unit for a long time
without running the engine. If you drain the carʼs battery too much, you may not be able to start the engine and this can reduce the service life of the battery.
1. Press the [SRC] button.
2. The illumination and display on the unit light up. The unit automatically remembers its last Operation mode and will automatically switch to display that mode.
3. Press and hold the or longer to turn off the power for the unit.
[
SRC] button for 1 second
Selecting a mode
1. Press the [SRC] button to change the Opera­tion mode.
2. Each time you press the eration mode changes in the following order:
Radio mode CD/MP3/WMA mode
AUX mode Radio mode...
Note:
If the CD mode is selected when no disc is inserted,
the display shows “NO DISC”.
[
SRC] button, the Op-
Switching the display
Press the [D] button to select the desired display. Each time you press the
switches in the following order:
[D]
button, the display
Radio mode
Main Display Clock Display Main Display...
CD mode
Main Display (Track No., Play Time)
­Clock Display Main Display...
MP3/WMA mode
Main-1 Display (Track No., Play Time) Main-2 Display (Folder No., Play Time) Track Folder Title Album Artist
Clock Display Main-1 Display...
AUX mode
Main Display Clock Display Main Display...
Once selected, the preferred display becomes the
display default. When a function adjustment such as volume is made, the screen will momentarily switch to that functionʼs display, then revert back to the preferred display several seconds after the adjustment.
Adjusting the volume
Turning the the volume; turning it counterclockwise decreas es the volume. “VOL XX” will be displayed where XX” is the volume level from 0 (minimum (
maximum).
The factory default setting for volume is “VOL
13”.
[
ROTARY] knob clockwise increases
Sound mode adjustments
1. Press the
ment mode.
2. Press the
item name”.
[ ]
[
“Z-EHCR”
“BASS”
“TREBLE”
button to enter the Sound Adjust-
]
,
button to select the
)
to 33
-
“BALANCE”
“FADER ”
DB178RMP / DB179RMP / DB179RGMP
9
Basic Operations
English
3. Turning the selected Sound mode.
Z-EHCR :
Selection type : OFF B-BOOST IMPACT EXCITE OFF...
BASS :
Adjustment range : -7 to +7
TREBLE :
Adjustment range : -7 to +7
BALANCE :
Adjustment range : LEFT 12 to RIGHT 12
FADER :
Adjustment range : FRONT 12 to REAR 12
Notes:
If no operation is performed for more than 10 sec-
onds, the Audio mode is cancelled and returns to the previous mode.
Bass and Treble can only be adjusted when the
Z-EHCR” is off.
[
ROTARY] knob to adjust the
Setting the Z-Enhancer
This unit is provided with 3 types of sound tone effects stored in memory. Select the one you pre­fer.
[
2-1. Press the
EHCR”.
3-1. Turning the
following sound tone effect.
“OFF”
“B-BOOST”
“IMPACT”
“EXCITE”
OFF : no sound effect B-BOOST : bass emphasized
IMPACT : bass and treble emphasized
EXCITE : bass and treble emphasized mid
de-emphasized
Note:
The factory default setting is “
]
,
button and select “
[
ROTARY] knob to change to the
(
indicator lights in the display
(
indicator lights in the display
(
indicator lights in the display
OFF”.
Adjusting the bass
[
2-1. Press the
BASS”.
3-1. Turning the
phasizes the bass; turning it counterclock­wise attenuates the bass.
BASS XX” will be displayed where “XX” is
the value from -7 to +7.
Note:
The factory default setting is “
]
,
button and select
[
ROTARY] knob clockwise em
BASS 0”.
Adjusting the treble
[
2-1. Press the
TREBLE”.
3-1. Turning the
phasizes the bass; turning it counterclock­wise attenuates the bass.
TREB XX” will be displayed where “
the value from -7 to +7.
Note:
The factory default setting is “TREB 0”.
]
,
button and select
[
ROTARY] knob clockwise em
Adjusting the balance
2-1. Press the
Z-
)
)
)
BALANCE”.
3-1. Turning the
phasizes the sound from the right speaker; turning it counterclockwise emphasizes the
sound from the left speaker. The display changes as follows: RIGHT XX” will be displayed where “
the value from 1 to 12. LEFT XX” will be displayed where “XX” is
the value from 1 to 12.
Notes:
When Balance is 0, “
instead.
The factory default setting is “
[
]
,
button and select
[
ROTARY] knob clockwise em
CENTER” will be displayed
CENTER”.
-
-
XX” is
-
XX” is
DB178RMP / DB179RMP / DB179RGMP
10
Basic Operations
English
Adjusting the fader
2-1. Press the
FADER”.
3-1. Turning the
phasizes the sound from the front speakers; turning it counterclockwise emphasizes the
sound from the rear speakers. The display changes as follows: FRONT XX” will be displayed where “XX” is
the value from 1 to 12. REAR XX” will be displayed where “XX” is
the value from 1 to 12.
Notes:
When Fader is 0, “CENTER” will be displayed
instead.
The factory default setting is “
[
]
,
button and select
[
ROTARY] knob clockwise em
CENTER”.
Adjusting MAGNA BASS EX
The MAGNA BASS EX does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.
1. Press and hold the
or longer to turn on the MAGNA BASS EX ef fect.
indicator lights in the display.
2. Press and hold the
or longer to turn off the MAGNA BASS EX ef fect.
indicator goes off from the display.
Note:
The factory default setting is “
[
] button for 1 second
[
] button for 1 second
OFF”.
AUX function
This system has an external jack input in the front panel where you can listen to sounds and music from external devices connected to this unit.
-
1. Connect the external music player to the input.
2. Press the mode to activate the AUX function.
Notes:
Use only the 3.5mm stereo jack for the AUX jack
input.
Volume can be adjusted through the unit. If you
face difficulties of hearing sound even after volume has been adjusted, please refer section “Selecting AUX IN sensitivity” on page 23 for details.
-
-
[
SRC] button and select the AUX
[
AUX
]
(
CT
Clock Time
The CT function receives CT data sent from an RDS station and displays the time. Press the [D button to switch to the CT display.
If a CT data is not being received, “CT--:--” appears
in the display.
Note:
CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas, the CT display may not accurate.
)
function
]
DB178RMP / DB179RMP / DB179RGMP
11
Radio Mode Operations
English
Listening to the radio
1. Press the [SRC mode, then the radio will be on.
2. To select a preset band, press the [BND ton, and then select one of the preset bands such as FM1, FM2, FM3 or AM
Every time the
band switches in the following order:
F1 F2 F3 AM
3. Press the desired station.
]
button and select the Radio
]
but
(
)
MW/LW
[
]
BND
button is pressed, the
(
[
, ] button to tune in the
MW/LW
)
F1...
.
Seek tuning
There are 2 types of seek tuning: DX SEEK and LOCAL SEEK.
DX SEEK can automatically tune in to receivable broadcast stations; LOCAL SEEK can tune in to only broadcast stations with a good reception sensitivity.
1. Press the [BND
2. Press the
(
band
FM or AM (MW, LW
If “MANU” is lit in the display, press and hold
the [BND
MANU” in the display goes off and seek tuning
is now available.
If “TA” is lit in the display, TP stations are auto-
matically sought.
station tuning.
DX SEEK
When the performing in the direction of higher frequencies. When the performed in the direction of lower frequencies.
When seek tuning starts, “DX” appears in the
[ ]
[ ]
display.
LOCAL SEEK
If the button is pressed and held in position for 1 second or longer, local seek tuning will be en­abled. Broadcast stations with good reception sensitivity are selected.
When local seeking starts, “LO” appears in the
display.
]
button and select the desired
]
button for 1 second or longer.
[
,
button is pressed, search will be
button is pressed, search will be
))
.
]
button to start automatic
Manual tuning
There are 2 ways available: Quick tuning and step tuning.
When you are in the step Tuning mode, the fre-
­quency changes one step at a time. In the quick Tuning mode, you can quickly tune the desired frequency.
[
]
1. Press the
band
If “MANU” is not lit in the display, press and hold
2. Tune into a station.
BND
(
FM or AM (MW/LW
the [BND
MANU” is lit in the display and manual tuning
is now available.
button and select the desired
]
button for 1 second or longer.
))
.
Quick tuning:
[
Press and hold the ond or longer to begin station tuning.
]
,
button for 1 sec
Step tuning:
[
Press the tuning.
If no operation is performed for more than 7 sec-
onds, manual tuning is cancelled and the display returns to the previous mode.
]
,
button to perform manual
Preset memory function
Preset memory function can store up to 24 sta­tions:
Six stations for each of FM1, FM2, FM3 and AM (
MW/LW
)
.
Manual memory function
1. Press the [BND
you want to store in the memory.
2. Press the
desired station.
3. Press and hold one of the
2 seconds or longer to store the current station into preset memory.
]
button and to select a band
[
, ] button to tune into a
[
DIRECT] buttons for
-
DB178RMP / DB179RMP / DB179RGMP
12
Radio Mode Operations
RDS Operations
English
Auto store
Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previ­ously stored station remains un-overwritten at the memory position.
1. Press the [BND
2. Press and hold the
A-STORE” will be displayed.
(
band
FM or AM (MW/LW
or longer. The stations with good reception are stored automatically to the preset channels.
If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations.
]
button and select the desired
))
.
[
] button for 2 seconds
Preset scan
Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.
1. Press the
2. When a desired station is tuned in, press the [
] button again to continue receiving that
station.
P-SCN” will be displayed and “SCN” indicator
lights in the display.
Note:
Be careful not to press and hold the
for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing sta tions.
[
] button.
[
] button
Recalling a preset station
A total of 24 preset positions 6-FM3, 6-AM) exists to store individual radio stations in memory. Pressing the correspond ing [DIRECT quency automatically.
1. Press the band
2. Press the corresponding [DIRECT recall the stored station.
]
button recalls the stored radio fre
[
]
BND
(
FM or AM (MW/LW
button and select the desired
(
6-FM1, 6-FM2,
))
.
]
button to
RDS (Radio Data System
This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS data.
This system can display the name of the broad­cast station being received (PS matically switch to the broadcast station with the best reception as you move long distances (AF switching).
Also, if a traffic announcement or programme type is broadcast from an RDS station, no matter what mode you are in, this broadcast is received. Additionally, if EON information is received, this information enables automatic switching of other preset stations on the same network and inter ruption of the station being received with traffic information from other stations (TP tion is not available in some areas.
When using the RDS function, always set the ra­dio to FM mode.
AF : Alternative Frequency PS : Programme Service Name PTY : Programme Type EON : Enhanced Other Network TP : Traffic Programme
RDS interrupt does not function during AM radio
reception.
When set receives RDS signal, and can read PS
data, PS appears in the display.
-
(
Traffic Announcement
TA
In the TA standby mode, when a traffic announce­ment broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it. Traffic
­programme (TP
­sible.
This function can only be used when “TP” is lit in
the display. When “ RDS broadcast station being received has traffic announcement programmes.
)
automatic tuning is also pos
TP” is lit, this means that the
)
)
and can auto
)
. This func
)
-
-
-
-
DB178RMP / DB179RMP / DB179RGMP
13
RDS Operations
English
Setting the TA standby mode
If you press the the display, “TP” and “TA” light in the display and the unit is set into the TA standby mode until a traffic announcement is broadcast. When a traffic announcement broadcast starts, “TRA INFO” ap­pears in the display. If you press the while a traffic announcement broadcast is being received, the traffic announcement broadcast re ception is cancelled and the unit goes into the TA standby mode.
[TA]
button when only “
TP” is lit in
[TA]
button
Cancelling the TA standby mode
As “TP” and “TA” lit in the display, press the button. The “TA” in the display goes off and the TA standby mode is cancelled.
If “TP” is not lit, pressing the
for a TP station.
[TA]
button searches
[TA]
Searching for a TP station
When “TP” is not lit, if you press the “TA” in the display lights and the unit automati­cally receives a TP station.
Note:
If a TP station is not received, the unit continues
the search operation. Pressing goes off “TA” in the display and stops TP station searching.
[TA]
[TA]
button again
button,
Auto store function for TP stations
You can automatically store up to 6 TP stations into preset memory. If the number of TP can be received less than 6, broadcast stations already stored in memory and left without being overwrit­ten.
As “TA” lit in the display, press and hold the button for 2 seconds or longer. The TP stations with the good reception sensitivity are stored into preset memory.
Even if you select FM1 or FM2, a TP station is
stored into memory for FM3.
[ ]
Cancelling an emergency broadcast
If you press the [SRC cast reception is cancelled.
]
button, emergency broad
Volume setting of TA, emergency broadcast (ALARM) and PTY
The volume for TA, ALARM and PTY interrupts can be set during TA, ALARM or PTY interrupt.
-
The factory default setting for this volume is “VOL
15”.
During a TA, ALARM or PTY interrupt, turn the [
ROTARY] knob to set the volume to the desired
level (0 to 33).
When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the inter rupt.
RDS Mode adjustment
RDS Mode is one of the Adjustment mode. Please refer chapter “6. OTHER OPERATIONS” on page 21 for details.
-
-
Emergency broadcast
If an emergency broadcast is received, all the Function mode operations are stopped.
ALARM” appears in the display and the emer­gency broadcast can be heard.
DB178RMP / DB179RMP / DB179RGMP
14
CD/MP3/WMA Mode Operations
English
What is MP3?
MP3 is an audio compression method and clas­sified into audio layer 3 of MPEG standards. This audio compression method has penetrated into PC users and become a standard format. This MP3 features the original audio data compres­sion to about 12 percent of its initial size with a high quality sound. This means that about 10 music CDs can be recorded on a CD-R disc or CD-RW disc to allow a long listening time without having to change CDs.
What is WMA?
WMA is the abbreviation of Windows Media Au­dio, an audio file format developed by Microsoft Corporation.
Notes:
WMA file with DRM
will be skipped from being playback and jump to the next track.
Windows Media™, and the Windows
trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
To disable DRM
(
Digital Rights Management):
1. When using Windows Media Player 9, click on TOOL OPTIONS MUSIC RECORD tab, then under Recording settings, unclick the check box for RECORD PROTECTED MUSIC. Then, reconstruct files.
2. When using Windows Media Player 10/11, click on TOOL OPTIONS RIP MUSIC tab, then under Rip settings, unclick the check box for COPY PROTECT MUSIC. Then, reconstruct files.
Note:
Personally constructed WMA files are used at your
own responsibility.
Precautions when creating MP3/WMA
disc
Usable sampling rates and bit rates:
(
Digital Rights Management
®
logo are
MP3
Decode Format Sampling Rate
(kHz)
Bit-rate (kbps)
MPEG 1, 2 and 2.5 - Layer 3 MPEG-1 : 32, 44.1, 48
MPEG-2 : 16, 22.05, 24 MPEG-2.5 : 8, 11.025, 12
MPEG-1 : 32 - 320 MPEG-2 : 8 - 160 MPEG-2.5 : 8 - 160 VBR
WMA
Sampling rate (
)
kHz
Bit-rate (kbps
48, 44.1, 32
)
32 - 192
Folder Level Limit : 8 Level Max. Folder Support : 128 Max. Files Support : 254
)
Folder Name : Max. 28 Characters File Name : Max. 28 Characters
File extensions
Always add a file extension “.MP3” or “.WMA
to MP3 or WMA file by using single character letters. If you add a file extension other than specified or forget to add the file extension, the file cannot be played.
Logical format (File system
)
1. When writing MP3/WMA file on a CD-R disc or CD-RW disc, please select “ISO9660 level 1, 2 or JOLIET or Romeo” as the writing software format. Normal play may not be possible if the disc is recorded on another format.
2. The folder name and file name can be dis played as the title during MP3/WMA play but the title must be within 28 single byte alphabeti­cal letters and numerals
)
sion
respectively.
(
including an exten
3. Do not affix a name to a file inside a folder having the same name.
Folder structure
1. A disc with a folder having more than 8 hierar­chical levels will be impossible.
-
-
DB178RMP / DB179RMP / DB179RGMP
15
CD/MP3/WMA Mode Operations
English
Number of files or folders
1. Up to 254 files can be recognized per folder. Up to 254 files can be played.
2. Tracks are played in the order that they were recorded onto a disc. be played in the order displayed on the PC.
3. Some noise may occur depending on the type of encoder software used while recording.
(
Tracks might not always
)
CD-DA/MP3/WMA selection on multi-session CD
1. If a multi-session CD which contains CD-DA and MP3/WMA files is being inserted, user can select either CD-DA or MP3/WMA files to be played.
2. Default setting for files to be played on multi­session CD is CD-DA files.
[
3. Press the will toggle between selection of CD-DA and MP3/WMA files to be played.
4. When CD-DA type is selected, display will show “M-SESS” then “CD”. When MP3/WMA type is selected, display will show “M-SESS” then “MP3”.
5. CD-DA/MP3/WMA selection function can only be performed in CD/MP3/WMA mode. It will only activate after re-insert CD. For example, current setting is CD-DA type. Press button for more than 1 second to set MP3/WMA type. User has to eject CD and re-insert again as to play MP3/WMA files.
6. Types of recording that can be played are as follows.
Disc
Mixed with CD-DA and MP3/WMA type tracks
CD-DA type track only
MP3/WMA type track only
BND] button for more than 1 second
[
BND
Setting
Set to CD Set to MP3/WMA
Play CD­DA
Play CD­DA
Play MP3/ WMA
Play MP3/WMA
Play CD-DA
Play MP3/WMA
7. When a Mixed mode CD is loaded and CD is set, the track to be played first is MP3/WMA file data and no sound is heard.
Note:
When playing a CCCD
setting to CD type. When this is set to MP3/WMA type, the CD cannot be played normally in some
cases.
Do not try to put your hand or fingers in the
disc insertion slot. Also never insert foreign objects into the slot.
Do not insert discs where adhesive comes
out from cellophane tape or a rental CD label, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down.
This unit is designed for play of 12cm com-
pact disc only. Do not attempt to use 8cm CD singles in this unit, either with or without an adaptor, as damage to the player and/or disc can occur. Such damage will not be covered by the warranty on this product.
Backup eject function
]
Pressing the the power to the unit was not turned on. Remove the disc after it is ejected.
Notes:
If you force a CD into before auto reloading, this
can damage the CD.
If a CD
seconds, the CD is automatically reloaded reload).
[ ]
(
12 cm) is left in the ejected position for 15
(
Copy Control CD), set the
CAUTION
!
button ejects the disc even if
Listening to a disc already loaded in the unit
Press the [SRC WMA mode. “
When the unit enters CD/MP3/WMA mode, play starts automatically.
Radio CD/MP3/WMA AUX Radio...
Note:
The default display is Main Display
Time).
]
button to select the CD/MP3/
CD/MP3” will be displayed.
(
(
Auto
Track No./ Play
DB178RMP / DB179RMP / DB179RGMP
16
CD/MP3/WMA Mode Operations
English
Loading a CD
Insert a CD into the center of the CD SLOT with the labeled side facing up. “LOADING” appears in the display, the CD plays automatically after loading.
Notes:
When the unit enters the CD/MP3/WMA mode,
FILEREAD” will be displayed to check the disc type and its contents.
If the inserted disc is a CD-DA format, “
displayed for a while. However, if the inserted disc is a MP3/WMA format, “ a while. MP3/WMA indicator will be lit on according to type of file detected.
indicator will be lit on if MP3 file is detected.
indicator will be lit on if WMA file is detected.
Then, the first track will be played automati cally.
If the CD is not inserted easily, there may be an
other CD in the mechanism or the unit may require service.
Discs not bearing the mark cannot be played
by this unit.
Some CDs recorded in CD-R/CD-RW mode may
not be usable.
MP3” will be displayed for
CD” will be
Ejecting the CD
Press the ed.
Notes:
If there is no disc loaded, the indication "NO DISC
If the CD is not removed after ejecting, CD will
[ ]
button, then the CD will be eject-
appears in the display and return to Radio mode after 4 seconds.
be automatically reloaded after 15 seconds and this will not automatically switch to CD/MP3/WMA mode.
The arrangement is shown below.
CD-DA disc
Main-1 Display
(
Track No., Play Time
Clock Display Main-1 Display...
MP3/WMA disc
Main-1 Display Main-2 Display Track Folder Title Tag Album Tag
-
Artist Tag Clock Display Main-1 Display...
where Track, Folder, Title Tag, Album Tag and
-
(
Track No., Play Time
(
Folder No., Play Time
Artist Tag are called Title Display.
"
)
)
)
Pausing play
1. Press the appears in the display.
2. To resume CD play, press the again.
[ ]
button to pause play. “PAUSE
[ ]
button
Display selection
1. You can choose the display type for CD-DA or MP3/WMA disc by pressing the [D] button.
[D]
To select the next type, press the
again.
button
Note:
Each of the items in Title Display will display
TRACK”, “FOLDER”, “TITLE”, “ALBUM” or “ART- IST” respectively for 2 seconds before showing related title information.
DB178RMP / DB179RMP / DB179RGMP
17
CD/MP3/WMA Mode Operations
English
Title display
1. There are 5 types of display for the Title Dis­play.
The arrangement is shown below.
2. If a MP3/WMA file does not support for ID3 TAG or the file is encoded with ID3 TAG header that does not consist of any TAG information, the display will show “NO TITLE”.
Notes:
The folder name will be displayed as “ROOT” which
the file allocates in the root folder.
For MP3, it supports ID3 Tags V2.4/2.3/2.2/1.1/
1.0.
The MP3 player decodes each file ID3 TAG ver 2
by default, if ID3 TAG ver 2 is unavailable, ID3 TAG ver 1 will be decoded.
(
UNICODE ID3
supported. Only ASCII characters can be displayed in Tags.
If ID3 has Japanese or Chinese character, “
be displayed as substitution.
Chinese, Japanese and etc) is not
” will
Selecting a track
Track-up
1. Press the ning of the next track.
2. Each time the back proceeds to another track in the advanc­ing direction.
[ ]
button to move to the begin-
[ ]
button is pressed, play-
Track-down
1. Press the
[ ]
button to move the beginning
of the current track.
2. Press the
[ ]
button twice to move to the
beginning of the previous track.
Fast-forward/fast-backward
Fast-forward
Press and hold the longer.
[ ]
button for 1 second or
Fast-backward
Press and hold the longer.
For Audio CD mode pressing the
for 1 second or longer will move forward or back ward 5 times faster than normal play, and pressing it for 3 seconds or longer will do the operation 30 times faster.
For MP3/WMA mode pressing the
for 1 second or longer will move forward or back ward 5 times faster than normal play, and pressing it for 3 seconds or longer will do the operation 10 times faster.
[ ]
button for 1 second or
[
[
,
,
]
button
]
button
MP3/WMA playing order
When selected for play folder up down functions, files and folders are accessed in the order in which they were written by the CD-ROM writer. Because of this, the order in which they are ex­pected to be played may not match the order in which they are actually played. You may be able to set the order in which MP3/WMA are to be played by writing them onto a medium such as a CD-R with their file names beginning with play sequence numbers such as “01” to “99”, depend­ing on your CD writer.
For example, a medium with the following folder/ file hierarchy is shown below.
-
-
DB178RMP / DB179RMP / DB179RGMP
18
CD/MP3/WMA Mode Operations
Example of a mediumʼs folder/file hierarchy
Folder select
This function allows you to select a folder con­taining MP3/WMA files and start playing from the first track in the folder.
1. Press the
Press the [DN
folder. Press the folder.
[DN]
or the [UP] button. ]
button to move the previous
[UP]
button to move the next
]
Press the [UP
shift to the first folder.
Folder without an MP3/WMA file is not selectable. Folder name will be displayed for a while.
2. Press the
button while in the final folder to
[ , ]
button to select a track.
Top function
The top function resets the CD player to the first track of the disc. Press the [BND the first track (Track No. 1
In case of MP3/WMA, the first track of a folder being
played will be returned.
]
button to play
)
on the disc.
Other various play functions
Scan play
CD-DA:
This function allows you to locate and play the first 10 seconds of all the tracks recorded on a disc.
MP3/WMA:
This function allows you to locate and play the first 10 seconds of all the tracks in all the fold­ers.
1. Press the [SCN “TRK SCN” appears in the display while the “SCN” indicator lights in the display.
Scan play starts from the next track after the
track currently being played.
Scan play will proceed to next folder after all
the tracks in the current folder have been scanned.
All scan play
MP3/WMA:
This function allows you to locate and play the first 10 seconds of the first track of all the folders on an MP3/WMA disc.
1. Press and hold the [SCN or longer to perform folder scan play.
ALL SCN” appears in the display while the
ALL ” and “SCN” indicators light in the dis­play.
All scan play starts from the first track of next
folder after the track currently being played.
]
button to perform scan play.
]
button for 1 second
English
DB178RMP / DB179RMP / DB179RGMP
19
CD/MP3/WMA Mode Operations
English
Repeat play
CD-DA, MP3/WMA:
This function allows you to play the current track repeatedly.
1. Press the “TRK RPT” appears in the display while the
RPT” indicator lights in the display.
[
RPT] button to perform repeat play.
All repeat play
MP3/WMA:
This function allows you to play all tracks in the MP3/WMA folder repeatedly.
[
1. Press and hold the or longer to perform folder repeat play.
ALL RPT” appears in the display while the
ALL ” and “RPT” indicators light in the dis­play.
]
button for 1 second
RPT
Random play
CD-DA:
This function allows you to play all tracks record­ed on a disc in a random order.
MP3/WMA:
This function allows you to play all tracks of cur­rent folder in a random order.
1. Press the play.
TRK RDM” appears in the display while the
RDM” indicator lights in the display.
Random play will proceed to next folder after
all the tracks in the current folder have been played.
[
RDM] button to perform random
All random play
MP3/WMA :
This function allows you to play all the tracks of all the folders recorded on an MP3/WMA disc in a random order.
]
1. Press and hold the [RDM or longer to perform folder random play.
ALL RDM” appears in the display while the
ALL ” and “RDM” indicators light in the dis­play.
button for 1 second
To cancel play
1. Press the operating button previously se­lected.
DB178RMP / DB179RMP / DB179RGMP
20
6. OTHER OPERATIONS
English
Adjustment Mode
1. Press and hold the [D second to switch to the adjustment selection display.
2. Press the
[
name”. (
“PTY” “PTY SEL” “AF”
)
“REG”
“SCRN SVR” “SCROLL” “AUX SENS” “TEL-SP” “TEL-SW”
Some of the items will have ENT indicator
light on, the display the setting value.
3. Turn the
[
ROTARY] knob to select the “desired
setting value”.
After completing settings, press the [D
to return to the previous mode.
Notes:
Items in bracket
called RDS mode adjustment. It will only available
for selection during Radio mode. “PTY-SEL
REG” only available when “AF ON”.
” only available when “PTY ON”.
PTY
This function enables you to listen to a broadcast of the selected programme type even if the unit is on a Function mode other than radio.
Some countries do not yet have PTY broadcast. In the TA standby mode, a TP station has priority
over a PTY broadcast station. The factory default setting is “OFF”.
2-1. Select “PTY”. 3-1. Turn the
[
ROTARY] knob to select “
OFF”.
ON:
PTY” in the display lights and PTY Standby mode is turned on. When the selected PTY broadcast starts, the PTY item name appears in the display.
OFF:
PTY” in the display goes off and PTY Standby mode is cancelled.
Cancelling a PTY interrupt broadcast
Press the [SRC
]
button during the PTY interrupt broadcast, the PTY interrupt is cancelled and the unit returns to PTY Standby mode.
]
button for more than 1
]
,
button to select the “item
[ ]
button must be pressed to
]
button
(
PTY, PTY SEL, AF and REG) are
ON” or
Selecting PTY
2-1. Select “PTY SEL”. 2-2. Press the 3-1. Turn the
[ ]
button.
[
ROTARY] knob to select the desired
PTY.
There are 29 types of PTY below can be select ed.
PTY item ENGLISH News Affairs Info Sport Educate Drama Culture Science Varied Pop M Rock M Easy M Light M Classics Other M Weather Finance Children Social Religion Phone In Travel Leisure Jazz Country Nation M Oldies Folk M Document
The PTY Selection mode is cancelled automatically
7 seconds after a PTY is selected.
Contents News Todayʼs events Information Sports Education Drama Culture Science Variety Pop music Rock music Easy music Light music Classics Other music Weather Finance For children Social Religion Phone in Travel Leisure Jazz Country Nation music Oldies Folk music Documentaries
-
DB178RMP / DB179RMP / DB179RGMP
21
Other Operations
English
PTY seek
2-1. Select “PTY SEL”. 2-2. Press the 3-1. Press the
broadcast in the direction of higher frequen­cies; press the direction of lower frequencies.
If no station with the selected PTY broadcast can be
received, the unit returns to the previous receiving station.
AF function
The AF function switches to a different frequency on the same network in order to maintain opti­mum reception.
The factory default setting is “ON”.
2-1. Select “AF”. 3-1. Turn the
OFF”.
ON:
AF” in the display lights and AF function turns on.
OFF:
AF” in the display goes off and AF function turns off.
If the reception of the current broadcast station
deteriorates, “SEARCH” appears in the display and the radio searches for the same programme on another frequency.
REG (Regional programme) function
When the REG function is ON, the optimum re­gional station can be received. When this func­tion is OFF, if the regional station area switches as you drive, a regional station for that region is received.
The factory default setting is “OFF”. Notes:
This function is disabled when a national station
such as BBC R2 is being received.
The REG function ON/OFF setting is valid when
the AF function is ON.
2-1. Select “REG”. 3-1. Turn the
OFF”.
ON:
REG” in the display lights and REG function turns on.
[ ]
button.
[ ]
button to search for a PTY
[ ]
button to search in the
[
ROTARY] knob to select “
[
ROTARY] knob to select “
ON” or
ON” or
OFF:
REG” in the display goes off and REG function turns off.
Manually tuning a regional station in the same network
1. This function is valid when the AF function is ON and the REG function is OFF.
Note:
This function can be used when a regional broad
cast of the same network is received.
2. Press any one of the [DIRECT out the regional station.
3. If the reception condition of the called out sta tion is bad, press the [DIRECT same number. The unit receives a local station on the same network.
Turning the screen saver function on or
off
This unit is provided with the screen saver func­tion which allows you to show screen saver in the operation status indication area of the display. You can turn on and off this function.
If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.
The factory default setting is “ON”.
2-1. Select “SCRN SVR”. 3-1. Turn the
"OFF".
ON:
Screen saver is enabled.
OFF:
Screen saver is disabled.
[
ROTARY] knob to select "
Setting the method for title scroll
Set auto scroll function for MP3/WMA title.
The factory default setting is “ON”.
2-1. Select “SCROLL”. 3-1. Turn the
OFF”.
ON:
To scroll automatically.
OFF:
To scroll just 1 time when the title was changed.
[
ROTARY] knob to select “
]
buttons to call
]
button of the
ON" or
ON” or
-
-
DB178RMP / DB179RMP / DB179RGMP
22
Other Operations
English
Selecting AUX IN sensitivity
Make the following settings to select the sensi­tivity when sounds from external devices con­nected to this unit are difficult to hear even after adjusting the volume.
The factory default setting is “MID”.
2-1. Select “AUX SENS”. 3-1. Turn the
[
ROTARY] knob to select “
LOW”,
MID” or “HIGH”.
Note:
For telephone interrupt, AUX SENS is always
"MID".
Setting the car speaker output for the
cellular phone
The factory default setting is “RIGHT”. To output the telephone calls, set the cellular phone
interrupt to ON.
2-1. Select “TEL-SP”. 3-1. Turn the
[
ROTARY] knob to select “
RIGHT
or “LEFT”.
RIGHT” Telephone calls can be heard on the front right speaker connected to this unit.
LEFT” Telephone calls can be heard on the front left speaker connected to this unit.
Cellular phone interrupt setting
If you connect this unit and your cellular phone with a separately sold unit, you can listen to your telephone calls on your car speakers.
The factory default setting is “OFF”.
2-1. Select “TEL-SW”. 3-1. Turn the
[
ROTARY] knob to select the set
ting.
Each time you turn the
[
ROTARY] knob, the
setting changes in the following order:
OFF ON MUTE.
OFF:
This unit continues normal operation even when the cellular phone is used.
ON:
You can listen to your telephone calls from the speakers connected to this unit.
MUTE:
The sound from this unit is muted during tele­phone calls.
Notes:
This unit requires hands-free kit that supports
input as a source of cellular phone audio input. Please consult your local authorized Clarion dealer for more information on the handsfree kit offered.
If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio through the system.
When listening to your calls on your car speakers,
you can adjust the volume by turning the knob, it will be memorized as new telephone vol ume.
The factory default setting for this volume is “VOL
15”.
This unit requires special wiring to mute the audio
signal automatically when a cellular telephone rings in the car.
This function is not compatible with all cellular
telephones. Please contact your local authorized Clarion dealer for information on proper installation and compatibility.
-
[
AUX
[
ROTARY
]
]
-
DB178RMP / DB179RMP / DB179RGMP
23
English
7. TROUBLESHOOTING
Problem Cause Measure
Power does not turn on. (
No sound is produced
No sound output when operating the unit with
amplifiers or power antenna attached.
Nothing happens when button are pressed.
General
Display is not accurate.
Fuse is blown.
)
Incorrect wiring.
Power antenna lead is shorted to ground or excessive current is required for remote-on the amplifiers or power antenna.
The microprocessor has malfunctioned due to noise, etc.
Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase.
Consult your store of purchase.
1. Turn the unit off.
2. Remove all wires attached to the power
antenna lead. Check each wire for a possible short to ground using an ohm meter.
3. Turn the unit back on.
4. Reconnect each amplifier remote wire to
the power antenna lead one by one. If the amplifiers turn off before all wires are attached, use an external relay to provide remote-on voltage (excessive current required).
Turn off the power, then press the [RELEASE] button and remove the DCP.
Press the reset button for about 2 seconds with a thin rod.
No sound heard.
DB178RMP / DB179RMP / DB179RGMP
24
DCP or main unit connectors are dirty.
The speaker protection circuit is operating.
Wipe the dirt off with a soft cloth moistened with cleaning alcohol.
1. Turn down sound volume. Function can also be restored by turning the power off and on again. (Speaker volume is reduced automatically when the speaker protection circuit operates).
2. If the sound is muted again, consult our service department.
Troubleshooting
Problem Cause Measure
No sound heard.
Sound skips or is noisy.
Sound is cut or skipped. Noise is generated or
CD/MP3/WMA
noise is mixed with sound.
Sound is bad directly after power is turned on.
Wrong filename.
MP3/WMA files are absent in a disc.
Files are not recognized as an MP3/WMA file.
File system is not correct.
Disc is dirty.
Disc is heavily scratched or warped.
MP3/WMA files are not encoded properly.
Water droplets may form on the internal lens when the car is parked in a humid place.
File system is not correct.
English
Write MP3/WMA files onto the disc properly.
Use MP3/WMA files encoded properly.
Use ISO9660 level 1, 2 or JOLIET or Romeo file system.
Clean the disc with a soft cloth.
Replace with a disc with no scratches.
Use MP3/WMA files encoded properly.
Let dry for about 1 hour with the power on.
Use ISO9660 level 1, 2 or JOLIET or Romeo file system.
8. ERROR DISPLAYS
Error Display Cause Measure
ERROR 2
ERROR 3
CD/MP3/WMA
ERROR 6
A DISC is caught inside the CD deck and is not ejected.
A DISC cannot be played due to scratches,etc.
A DISC is loaded upside-down inside the CD deck and does not play.
This is a failure of CD deckʼs mechanism and consult your store of purchase.
Replace with a non-scratched, non-warped­disc.
Eject the disc then reload it properly.
DB178RMP / DB179RMP / DB179RGMP
25
English
9. SPECIFICATIONS
FM tuner
Frequency Range: 87.5 MHz to 108 MHz Usable Sensitivity: 11 dBf 50 dB Quieting Sensitivity: 17 dBf Alternate Channel Selectivity: 75 dB Stereo Separation (1 kHz): 35 dB
±
Frequency Response
(
3 dB): 30 Hz to 15 kHz
AM tuner
Frequency Range: MW 531 kHz to 1602 kHz LW 153 kHz to 279 kHz
Usable Sensitivity: 25 μV
CD player
System: Compact disc audio system Usable Discs: Compact disc Frequency Response: 10 Hz to 20 kHz
Signal-to-Noise Ratio: 85 dB (1 kHz) IHF-A Dynamic Range: 87 dB (1 kHz Harmonic Distortion: 0.01%
)
(
±
3 dB
Notes:
• Specifications comply with JEITA Standards.
• Specifications and design are subject to change without notice for further improvement.
• Please make sure when connecting external power amplifier, that you properly, to the car chassis, ground the amplifier.
• If this is not done, severe damage to the source unit may happen.
)
Audio
Maximum Power Output: 200 W (50 W X 4 ch Power Output: 4 X 25 W (DIN 45324, +B=14.4 V Bass Control Action (100 Hz): ±14 dB Treble Control Action (10 kHz): ±14 dB
(
Line Output
with A/C 1 kHz, 10 k
Ω): 1.8 V
General
Power Supply Voltage:
14.4 V DC (10.8 V to 15.6 V allowable), nega­tive ground
Current Consumption: Less than 15 A Speaker Impedance: 4 Ω (4 Ω to 8 Ω allowable
(
Weight: 2.42 lb. Dimensions:
178 mm Width X 50 mm Height X 152 mm Depth
DB178RMP / DB179RMP / DB179RGMP
26
1.1 kg
)
)
)
)
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2007: Clarion Co., Ltd.
Printed in Malaysia / Imprimé en Malaisie / Gedruckt in Malaysia / Stampato in Malaysia
Gedrukt in Maleisi / Impreso en Malasia / Tryckt i Malaysia / Impresso na Malásia
PE-2934E
PE-2935E
280-8458-00
Loading...