CITIZEN AT7030-05E, AT7035-01E User Manual

Instruction manual: CITIZEN Eco-Drive Proximity

Thank you for your purchase of this Citizen watch.

Before using the watch, read this instruction manual carefully to ensure correct use.

After reading the manual, store it in a safe place for future reference.

Be sure to visit the Citizen website at http://www.citizenwatch-global. com/. Here you will find a variety of information such as electronic setting guides, answers to frequently asked questions, Eco-Drive recharging information and more.

To check the movement number

A case number—4 alphanumeric characters and 6 or more alphanumeric characters—is engraved on the case back. (Figure on the right)

The first 4 characters of the case number represent the movement number of the watch.

In the example on the right, “” is the movement number.

Engraving position example

The engraving position may differ depending on watch model.

Safety precautions — IMPORTANT

This manual contains instructions that should be strictly followed at all times not only for optimal use, but to prevent any injuries to yourself, other persons or property. We encourage you to read the entire booklet (especially, pages 11a to 12a) and understand the meaning of the following symbols:

■ Safety advisories are categorized and depicted in this manual as follows:

DANGER Highly likely to cause death or serious injury

WARNING Can cause serious injury or death

CAUTION Can or will cause minor or moderate injury or damage

Important instructions are categorized and depicted in this manual as follows:

Warning (caution) symbol followed by instructions that should be followed or precautions that should be observed.

Warning (caution) symbol followed by prohibited matters.

Before using this watch

After unpacking, the following must be done before using the watch:

• Checking the power reserve see page 3a

For optimal performance, ensure your watch is fully charged prior to use. Refer to page 2bc for charging procedures and times.

• Setting the correct time and date for your locale

The time may be adjusted either manually (see page 8bc), or by receiving time information when connected with iPhone, a mobile

digital device, using the app available from the App Store (see page

6c).

This watch has a rechargeable cell which is charged by exposing the dial to light.

Expose the dial to direct sunlight regularly to charge the watch.

For details of charging, see page 2bc.

Band adjustment

We do not recommend attempting to adjust the watch band yourself. Special expertise and experience is required for proper adjustment. If not adjusted correctly, the band may become detached leading to an injury or loss of your watch. (Some retailers may supply a band adjustment tool with your purchase).

For band adjustment, we recommend you consult the retailer where the watch was purchased or your nearest Authorized Citizen Service Center.

Some repair shops may charge a nominal fee for adjustment if the watch was not purchased directly from them.

Protective stickers

Be sure to remove any protective stickers that may be on your watch (case back, band, clasp, etc.). Otherwise, perspiration or moisture may enter the gaps between the protective stickers and the parts, which may result in a skin rash and/or corrosion of the metal parts.

How to use a specially designed crown/push button

Some models are equipped with a specially designed crown and/or push button(s) to prevent accidental operation. Please refer to the following chart for use.

Screw down crown and screw down push button

Unlock the crown prior to operate your watch.

 

Unlock

Screw

Rotate the crown

counterclockwise

down

until it releases

crown

from the case.

 

Screw

Rotate the

locking screw

down push

counterclockwise,

button

and loosen until it

 

stops.

Lock

Push the crown in to the case. With gentle pressure towards the case, rotate the crown clockwise to secure it to the case. Be sure to tighten firmly.

Rotate the locking screw clockwise, and tighten firmly.

Recessed buttons

Press the button with a narrow-tipped object such as a wooden toothpick.

 

1

 

 

Table of contents

 

Features ................................................................................

2a

Component identification ......................................................

2a

Charging your watch ..............................................................

2b

Checking the current power reserve........................................

3a

Changing the mode................................................................

3b

Before connecting to iPhone ..................................................

4a

Registering (Pairing) your iPhone [PR] ..................................

5b

Disconnecting with iPhone [DCT] .........................................

6a

Connecting to the registered iPhone [CT] ..............................

6b

Activating the functions of the dedicated app ..........................

6c

Receiving email reception notification [Email Alert]................

7b

Shortcut for registration (pairing)............................................

7c

Bluetooth 4.0 wireless technology..........................................

8a

Adjusting the time and calendar manually [TME]/[CAL]......

8b

Using local time [L-TM] ........................................................

9a

Using the chronograph [CHR]...............................................

9a

Checking and correcting the reference position [302]............

9b

Troubleshooting ..................................................................

10a

Resetting the watch — All Reset..........................................

10c

Eco-Drive (solar powered) watch handling precautions .........

11a

Water resistance ..................................................................

11b

Precautionary items and usage limitations ...........................

11b

Information .........................................................................

12b

Specifications.......................................................................

12b

a

b

c

Instruction manual: CITIZEN Eco-Drive Proximity

Features

Connectable with your iPhone using Bluetooth 4.0 through the dedicated app, and equipped with the following features:

• Automatic Time Sync on page 6c

• Incoming Call Alert on page 6c

Link Loss Alert on page 7a

iPhone Search on page 7a

Email Alert on page 7b

Schedule Alert on page 7a

Eco-Drive (solar powered): Never needs a new battery. This watch is fueled by light.

Chronograph: Measure elapsed time up to 60 minutes.

Local time: Easy to see the time for a second time zone, anywhere in the world.

Perpetual calendar: Once set, the date will automatically adjust for months shorter than 31 days as well as leap years.

* “Eco-Drive” is Citizen’s proprietary technology.

Component identification

1

 

5

 

 

Upper right button (

)

2

6

 

3

Crown

 

 

7

 

4

Lower right button (

)

 

8

1 Hour hand

2 Notification indication for connecting to iPhone (see page 5a) 3 24-hour hand on the upper left sub dial

4 Second hand/Chronograph second hand

5 Function hand and function indications on the upper right sub dial

Connection status (see page 5a)/Power reserve level (see page 3a)

Chronograph minute hand

Day of the week

6 Minute hand

7 Date indication

8 Mode hand on the lower sub dial (see page 3bc)

The illustrations in this instruction manual may differ from the actual appearance of your watch.

Charging your watch

This watch has a rechargeable cell which is charged by exposing the dial to light, such as direct sunlight or fluorescent lamps (refer to page 2bc for charging guidelines).

After taking off the watch, put it in a location where the dial is exposed to bright light, such as by a window.

For optimal performance, be sure to:

Expose the watch to direct sunlight half a day at least once a week.

Avoid leaving the watch in dark places for long periods of time.

Caution

Do not charge the watch at high temperature (about 60°C/140°F or higher).

If the watch is obscured from light by long sleeves frequently, supplemental charging may be needed to ensure continual operation. Refer to page 2bc.

When the watch reaches a low charge state (insufficient charge warning function)

When the power reserve becomes low, the second hand moves once every two seconds. This is the insufficient charge warning function. Be sure to fully charge your watch as outlined on page 2bc.

• When the watch is sufficiently charged, the second hand will move normally.

If you do not charge the watch for 10 days or

longer after the insufficient charge warning movement has begun, the watch will be depleted of all power and stop.

Caution

When in the insufficient charge warning state, the current time and date are indicated. However, other features and functions of the watch will not be available for use.

Charging time by environment

Below are the approximate times required for charging when exposing the watch dial to light continuously. Please use this table as a reference only.*

 

 

 

Charging time (approx.)

Environment

Illuminance

To work for

To start working

To become fully

(lx)

normally when the

charged when the

 

one day

 

 

cell is discharged

cell is discharged

 

 

 

 

 

 

 

 

Outdoors

100,000

12 minutes

3.5 hours

13 hours

(sunny)

 

 

 

 

Outdoors

10,000

30 minutes

6.5 hours

30 hours

(cloudy)

 

 

 

 

20 cm (7-7/8

 

 

 

 

inches)

 

1.5 hours

15 hours

90 hours

away from a

3,000

fluorescent

 

 

 

 

lamp (30W)

 

 

 

 

Interior lighting

500

8 hours

80 hours

600 hours

 

 

 

 

 

2

To charge your watch, it is recommended to expose the dial to direct sunlight. Optimal charging is achieved by exposing the dial to direct sunlight outdoors for a short time each day.

Power reserve in normal use from fully charged without additional charging

With connecting to iPhone

Without connecting to iPhone

About 8 months*

About 17 months

*When the watch is connected to your iPhone about 6 hours a day and received messages about 10 times a day, you can use the connecting feature

between the watch and your iPhone about 30 days in 8 months. For details, see page 3a.

Caution when connecting to iPhone

Connecting to iPhone requires a substantial amount of power, especially if receiving many notifications. Be sure to keep your watch fully charged when utilizing this feature.

We recommend disconnecting with iPhone when not needed (see page 6a).

Connecting feature does affect battery usage on your iPhone. Be sure to check the charge level of your iPhone.

Power save function

If your watch is not exposed to light sufficient for charging for 30 minutes or more, the second hand will stop in order to conserve power. Although the second hand is not moving, the correct seconds are stored in memory.

The power save function cannot be activated manually; it is an automatic feature only. The power save function does not operate under the following conditions:

The crown is in position or .

The current mode is Chronograph [CHR] or Calendar [CAL].

The second hand is indicating a notification (“MAIL”/ “CALL”/ “LL”).

Canceling the power save function

The power save function is automatically canceled when the watch is exposed to light sufficient for charging. The second hand will then resume normal movement.

The power save function will also be canceled if a notification is received from your iPhone. Note: the watch must be sufficiently charged and the dedicated app running on your iPhone in order to receive notifications.

If the watch is in the power save state for long period of time, adjust

the time and date before use through the iPhone connection (see page 6c) or manually (see page 8b).

a

b

c

CITIZEN AT7030-05E, AT7035-01E User Manual

Instruction manual: CITIZEN Eco-Drive Proximity

Checking the current power reserve

This watch has a power reserve display feature when in [TME], [L-TM], [PR], [CT], or [DCT] mode.

Power reserve indication (Function hand on the upper right sub dial)

Without iPhone

With iPhone

connection

connection

 

If the current power reserve is not displayed (the watch is in [CAL] or [CHR] mode), change the mode (see page 3a).

When connecting to iPhone, pay particular attention to the power reserve to ensure sufficient power is available.

The power reserve level

Level

3

2

1

0

 

With connecting to iPhone within 6 hours a

 

 

 

day

 

 

 

Up to 10 days

Up to 15 days

Up to 5 days

7 months*

 

Without connecting to iPhone

 

 

Approximate

Up to 3

Up to 5

Up to 2 months

 

months

months

 

duration of

 

 

Power reserve

Power reserve

Power reserve is

Power reserve

indication at

this level

is sufficient

is sufficient for

getting low. The

is not sufficient

 

for all features

all operations

watch should be

for normal

 

and functions.

at this level.

fully charged to

operation. The

 

Optimal

 

ensure optimal

watch must be

 

performance

 

performance.

fully charged.

 

is achieved at

 

 

 

 

 

Charge the watch immediately.

 

this level.

 

*When the power reserve is at level “0”, basic watch functions can be used. However, registering (see page 5bc) and connecting to iPhone (see page 6b) are not available. If the watch is connected to your iPhone and the power reserve becomes at level “0”, the connection will be disconnected automatically.

Changing the mode

This watch features eight different modes (functions). Change the mode by rotating the mode hand on the lower sub dial before using each mode.

1 Pull the crown out to position .

The second hand moves to indicate the 30 seconds position.

The second hand indicates the 30 seconds position.

2 Rotate the crown to select a mode.

Each time you rotate the crown, the mode hand on the lower sub dial moves.

Rotate the crown until the mode hand indicates the mode you wish to use.

Proper location

Improper location

Ex. When selecting [L-TM]

You may turn the mode hand either clockwise or counterclockwise.

The hands/indications function differently in each mode. See page 3bc for more details of each mode and the functions of the hands/indications in each mode.

3Push the crown in to position to finish the procedure.

Mode indications and functions

24-hour hand

Function hand

Mode hand

Time — [TME]

Normally, use the watch in [TME] or [L-TM] mode.

[TME]

The currently set time is displayed.

The function hand on the upper right sub dial indicates the power reserve in this mode.

3

Pairing/Connecting/Disconnecting of iPhone — [PR]/[CT]/[DCT]

[PR] (Pairing)

[CT] (Connect)

[DCT] (Disconnect)

Select this when you want

Select this mode when

Select this when you

to connect (pair/register)

you want to connect your

disconnect the watch

the watch to your iPhone

watch to your iPhone

from your iPhone. (See

for the first time. (See

after initial pairing. (See

page 6a.)

page 5b.)

page 6b.)

 

• Time indication is same as either [TME] or [L-TM].

Local time — [L-TM]

[L-TM]

Select this to display the time of

another area (local time). (See page

9a.)

The 24-hour hand on the upper left sub dial, date and day of the week display local time.

The function hand on the upper right sub dial indicates the power reserve in this mode.

Calendar — [CAL]

[CAL]

Select this to display the calendar. (See page 8b.)

The second hand: Indicates the year/month.

The function hand on the upper right sub dial: Indicates the day of the week.

The hour, minute and 24-hour

hands will continue to reflect the current time set in [TME] mode.

Chronograph — [CHR]

[CHR]

Select this when you want to use the chronograph. (See page 9a.)

The second hand: Indicates the chronograph seconds.

The function hand on the upper right sub dial: Indicates the chronograph minutes.

The hour, minute and 24-hour

hands will continue to reflect the time set in [TME] or [L-TM] mode.

The reference position — [302]

[302]

The current reference position of each hand/indication is indicated. (See page 9b.)

a

b

c

Instruction manual: CITIZEN Eco-Drive Proximity

Before connecting to iPhone

This watch communicates with iPhone through the connection of Bluetooth 4.0, which is featured Bluetooth Low Energy (BLE) powersaving technology.

It is required for connection to install and start up a dedicated app “CITIZEN ECO-DRIVE Proximity” on a compatible iPhone.

The flow for connection is shown as follows.

Install the dedicated app

Start up the app

Registration/Pairing

Connection

Disconnection

• Screen in this manual may differ from the actual app.

iPhone connectable with this watch

To check the latest information on compatible iPhone and iOS, visit the following sites:

Citizen Watch global site: http://www.citizenwatch-global.com/

Service & Support

Set the mode to [DCT] (see page 6a) to use this watch as a standard one in places such as an airplane, where electronic devices are limited to use.

iPhone is a trademark of Apple Inc., registered in the U.S. and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.

Functions available with the connection

Automatic adjustment of time and calendar [Time Sync]

The watch adjusts time and calendar automatically using time info provided from the iPhone.

 

Time info

 

ACT

Cellular phone network

The second hand points

 

ACT” while receiving time

 

info from iPhone.

Incoming call notification [Incoming Call]

Incoming call alert comes to the watch since iPhone’s call reception.

CALL

Incoming

Incoming call info

Call

 

The watch vibrates twice

Cellular phone network and the second hand points “CALL” as it receives

incoming call info.

Schedule notification [Schedule Alert]

The watch receives schedule notification from the built-in Calendar app on your iPhone, corresponding to the setting of the app.

MAIL

Schedule

Schedule notification

info

notification

 

The watch vibrates twice

and the second hand points “MAIL” as it receives

notification info.

4

Email reception notification [Email Alert]

Email alert comes to the watch since iPhone’s email reception to the account set on the dedicated app.

MAIL

Email

Email notification

notification

info

The watch vibrates twice

Cellular phone network and the second hand points “MAIL” as it receives

notification info.

Link Loss alart (Bluetooth disconnection notification) [Bluetooth Link Loss Alert]

The watch notifies iPhone’s disconnection due to their distance.

Bluetooth connectable range 5 m (16-1/2 feet) to 10 m (33 feet)

LL

The watch vibrates twice and the second hand points “LL” as it detects disconnection.

iPhone search [iPhone Search]

The watch sends signals to the registered iPhone within the connectable range.

• This function is also available when they are disconnected.

Bluetooth connectable range 5 m (16-1/2 feet) to 10 m (33 feet)

 

ACT

The iPhone sounds

The second hand points “ACT

(depending on the setting)

as it starts to send signals.

as it receives the signal.

 

a

b

c

Loading...
+ 8 hidden pages