Canon S800 Instruction Guide

S800 Setup Instructions

Step 1: Unpack The Printer

1. Carefully remove all items from the box.

Step 2: Prepare the Printer

1. Remove the spacers and shipping tape from the inside and outside of the printer.

2. Plug the power cord into the back of the printer and connect the other end to a
power outlet.

3. Press the POWER button.

4. Open the front cover. The printhead holder automatically moves to the center.
Remove the protective tape.

5. Write down the serial number located to the left of the printhead. You will need
this later to register the product.

Step 3: Install the Printhead

1. Remove the printhead from its package.

2. Turn the printhead over, then remove the orange protective cap.

NOTE: Do not touch the electrical contacts.

3. Raise the blue lock lever.

4. Gently set the printhead into the holder. The printhead will rest at a slight angle.

Do not press it down.

Lower the blue lock lever and gently press it down until you hear it lock into place.