Canon Pixma iP6000 Installation Instructions Manual

Installation Procedure

Canon Pixma iP6000 Installation Instructions

Canon Pixma iP6000 with MIS CFS Installed

Prerequisite -

Before starting this installation, you MUST test your printer to make sure it is printing 100%
correctly. The best way to do this is to first print a Nozzle pattern, using the printer utility
software provided by Canon. Once a perfect nozzle pattern is achieved, print 5 copies of the
MIS

purge6.tif

pages must print without banding or skipping (white spaces). If your printer can not do this, do
not install the CFS. Run some cleaning cycles or get new cartridges. Do not proceed until you
can pass these tests. The Purge6 image can be found on the diskette included with your
system. If you have a Mac you can download it from our website. You can also get it from the
Helpdesk Download Library.

image using the Plain Paper and Standard Quality settings on the printer. All 5

Tools & Materials Needed -



MIS CFS System, ink, and a working Canon iP6000 printer

S a v e M o n e y a n d I m p r o v e Y o u r P r i n t i n g

MIS Associates Inc 2901 Auburn Rd Auburn Hills, MI 48326 800-445-8296

http://www.inksupply.com Fax: [phone] Email: [e-mail]

 Ruler or measuring tape
 Pair of scissors
 Alcohol and some paper towels
 Some paper to print on

Items In This Kit You Will Need To Save -

 MIS iP6000 PIXMA Installation Instructions
 Orange Cartridge Caps
 White Tube Plugs
 Vacuum Pump Kit and Instructions

If you purchased your system pre-filled, go to Step 2, else continue with Step 1.

1.

Remove the caps from the ink bottles and replace them with the caps from the package
supplied with your CFS system.

The vacuum pump must be assembled as shown in the below photo. Check valve direction is critical.

S a v e M o n e y a n d I m p r o v e Y o u r P r i n t i n g

MIS Associates Inc 2901 Auburn Rd Auburn Hills, MI 48326 800-445-8296

http://www.inksupply.com Fax: [phone] Email: [e-mail]

CARTRIDGE FILL PROCEDURE-

Before filling: If the orange caps are not installed on the cartridges, install the orange

caps that originally came with the CFS over the cartridge ink supply ports.

•

Make sure not to twist the tubing between the color cartridges and the clip on the black
cartridge as this will cause issues with filling and installation.

S a v e M o n e y a n d I m p r o v e Y o u r P r i n t i n g

MIS Associates Inc 2901 Auburn Rd Auburn Hills, MI 48326 800-445-8296

http://www.inksupply.com Fax: [phone] Email: [e-mail]