Canon 9615A001, PIXMA iP5000 Quick Start Manual
Quick Start Guide
Table of Contents
Preface 1
Shipping Materials
Introduction 1
Setting Up
Preparing the Printer
Connecting the Printer to the Computer
Installing the Print Head
Loading Paper
Installing the Printer Driver
Aligning the Print Head
Basic Operations
Printing with Windows
Printing with Macintosh
Print Head Maintenance
Appendix 21
Printing Photographs Directly from a Digital Camera 21
Notes on Handling the USB Interface (for Windows Users) 25
12
15
15
18
20
1
2
2
2
4
7
8
For Further Details...
25
BE
QA7-3441-V01
Exif Print
This printer supports ExifPrint.
Exif Print is a standard for enhancing the communication between digital cameras and printers. By
connecting to an Exif Print-compliant digital camera, the camera’s image data at the time of shooting is
used and optimized, yielding extremely high quality prints.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise emissions from a digital
apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus,”
ICES-003 of the Industry Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils
numériques de Classe B prescrites dans la norme sur le matériel brouilleur NMB-003 d'Industrie
Canada intitulée « Appareils numériques ».
International ENERGY STAR® Program
As an ENERGY STAR® Partner, Canon Inc. has determined that this product meets the ENERGY
STAR guidelines for efficiency.
The International ENERGY STAR
®
Office Equipment Program is a global program
that promotes energy saving through the use of computer and other office equipment.
The program backs the development and dissemination of products with functions
that effectively reduce energy consumption. It is an open system in which business
can participate voluntarily. The targeted products are office equipment such as computers, monitors, printers, faxes and copiers.
Their standards and logos are uniform among participating nations.
Power Requirements
Never use a power supply voltage other than that supplied in the country of purchase. Using the incorrect voltage could cause a fire or electric shock. The correct power supply voltages and frequencies are
as follows:
AC 110-120V, 50-60Hz
AC 220-240V, 50-60Hz
1
Preface
Shipping Materials
Thank you for purchasing a Canon Bubble Jet Printer.
Check that all the following items are in the box. If anything is missing or is damaged, contact your Canon
Service Representative.
Printer
Setup Software & User’s Guide CD-ROM
Quick Start Guide
Print Head
5 Ink Tanks
* A USB cable should be purchased separately according to your computer. For details on cable
specifications, refer to page 2.
Introduction
This Quick Start Guide uses the following symbols to indicate important information. Always observe the
instructions indicated by these symbols.
Instructions that, if ignored, could result in death or serious personal injury caused by incorrect
operation of the equipment. These must be observed for safe operation.
Instructions that, if ignored, could result in personal injury or material damage caused by incorrect
operation of the equipment. These must be observed for safe operation.
Also read the Safety Precautions in the
User’s Guide
. Observe the warnings and cautions to avoid
personal injury or damage to the printer.
Trademark Notices
• Canon is a registered trademark of Canon Inc.
• BJ is a trademark of Canon Inc.
• PIXMA is a trademark of Canon Inc.
• Microsoft
®
and Windows® are registered trademarks of Microsoft Corporation in the U.S. and other
countries.
• Apple, Mac, and Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other
countries.
• All other trademarks and registered trademarks appearing in this
Quick Start Guide
are the property of
their respective owners.
Copyright ©2004 CANON INC.
All rights reserved. No part of this publication may be transmitted or copied in any form whatsoever
without the express written permission.
2
Setting Up
1 Preparing the Printer
1
Place the printer on a flat surface.
2
Remove the packing material and tape
from the printer as shown.
The tape position is subject to change.
2 Connecting the Printer to the Computer
USB cable
Recommended: Canon or other computer manufacturer cable, up to 5 meters in length.
• If your computer has an earth connection, make sure that this is attached.
• If you do not intend to use the printer for a long period of time, unplug the power cord from the
power outlet after turning off the printer.
3
Follow the steps below to install the printer driver
correctly.
1
Ensure that the printer and the
computer are turned off.
2
Connect the cable.
If the Add New Hardware Wizard or Found New Hardware
Wizard screen appears when carrying out the following operations,
click Cancel and turn off the computer.
4
3 Installing the Print Head
• Never attempt to plug the power cord into the power outlet or unplug the power cord when your
hands are wet.
• Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy
objects on the power cord.
• Never use any power supply other than the standard power supply available in the country of
purchase. Using the incorrect voltage and frequency could cause a fire or electric shock.
• Always push the plug all the way into the power outlet.
Installing the Print Head
1
Plug the printer in.
2
Turn on the printer. Do NOT turn on the
computer yet.
The POWER lamp flashes and the printer begins to
operate. Wait until the POWER lamp remains fully lit.
3
Open the Paper Output Tray and Top
Cover, and then pull down the Inner
Cover.
Push the upper center ( ) of the Front Cover to
open the Paper Output Tray.
4
Remove the tape.
5
Raise the Print Head Lock Lever.
Do not touch internal parts other than the Print Head
Lock Lever.
Support the Front Cover with your hand when
opening the tray.
Print Head Holder
Print Head Lock Lever
5
6
Remove the protective cap from the
Print Head.
7
Place the Print Head in the holder.
8
Lock the Print Head into place by
lowering the lever.
Do not touch the lever once the Print Head has been
installed.
Installing the Ink Tanks
• For safety reasons, store ink tanks out of the reach of small children.
• Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands.
• Be sure to remove the clear film from the ink tank in the exact order as shown in step 2.
1
Unpack the cyan ink tank.
2
Pull the orange tape (A) off in the
direction of the arrow and remove the
clear film. Then, remove the film (B).
• Do not touch the Print
Head Nozzles or
electrical contacts.
• Do not attempt to
reattach the protective
cap once it has been
removed.
Be careful not to touch any parts inside the printer.
electrical
contacts
Print Head
Nozzles
Print Head
Print Head Holder
(A)
(B)
6
3
Hold the ink tank as shown in the
diagram and remove the orange
protective cap.
4
Insert the cyan ink tank into the righthand slot. Press the mark on the ink
tank until it clicks into place.
5
Use the same procedure to install the
other ink tanks into their appropriate
slots.
Check the labels to make sure that each tank is in the
correct position.
6
Put back the Inner Cover and close the
Top Cover.
• Do not squeeze the side of
ink tanks as this may cause
the ink to leak out and stain
your clothes and hands.
• Do not touch the open ink
port.
• Do not reattach the protective
cap once you have removed
it.
• Only install the ink tanks in the positions specified
by the labels.
• If ink tanks are not installed in the right position,
colors will not be printed correctly. Immediately
reinstall the tank in the correct position and carry
out Print Head Cleaning. For details, refer to the
User’s Guide.
protective cap
ink port
Yellow
BCI-6Y
Cyan
BCI-6C
Black
BCI-3eBK
Black
BCI-6BK
Magenta
BCI-6M
7
4 Loading Paper
This section describes how to load paper in the Sheet Feeder. When performing the print head alignment,
you need to load paper in the Sheet Feeder.
Loading A4 (Letter) Size Plain Paper in the Sheet Feeder
1
Pull out the Paper Support and Paper
Output Tray completely as shown.
Push the upper center ( ) of the Front Cover to
open the Paper Output Tray.
2
Load the paper and align it with the right
side of the Sheet Feeder.
You can load up to 150 sheets of plain paper (64 gsm).
Do not exceed this limit.
3
Slide the paper guide against the left
side of the paper stack.
4
Ensure that the Sheet Feeder lamp is lit.
If not, press the Paper Feed Switch.
Support the Front Cover with your hand when
opening the tray.
Paper Output Tray
Paper Support
You now need to install the printer driver:
Windows: Go to page 8
Mac OS X: Go to page 10
print side
Sheet
Feeder
Lamp
• Other than the Sheet Feeder, you can load paper in the Cassette. For information on loading the
print media in the Cassette, refer to the User's Guide.
• You can select the paper source also from the printer driver. For details, refer to the User's Guide.
Loading...