Canon MP F80, MP F60 Service Manual

MP F80
MP F60

SERVICE
MANUAL

Canon

SERVICE REFERENCE
MANUAL

REVISION 0

MultiPASS F80 H12-2582 120V USA
MultiPASS F60 H12-2592 120V USA

MAY. 2002

COPYRIGHT





2002 CANON INC. MultiPASS F80/F60 MAY . 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)



HY8-99AM-000

I. PREFACE

This manual is based on the following manualsin the service materials CD-ROM(HY8-69A1-00Z), and
only includes differences between MultiPASS F50/F30 and MultiPASS F80/F60.

HY8-69A1-00Z MultiPASS F50/F30 SERVICE MATERIALS, Rev.0
HY8-19AX-000 MultiPASS F50/F30 SERVICE MANUAL, Rev.0
HY8-39AS-000 MultiPASS F50/F30 PARTS CATALOG, Rev.0
HY8-89AW-000 MultiPASS F50/F30 CIRCUIT DIAGRAM, Rev.0

II. CONTENTS

CHAPTER 1 : POINTS OF DIFFERENCE FR OM THE ORIGINAL MACHINE

This chapter explains the differences between this machine and the original one.

CHAPTER 2 : SERVICE INFORMATION

This chapter contains corrections and changes made to the original materials which were issued as
Service Information before the publication of the Service Reference Manual.

CHAPTER 1

POINTS OF DIFFERNECE

FROM THE ORIGINALMACHINE

1.Differences in Specifications/Functions.

* Change a base printer into S700 from S600.
* Change print speed. B&W 20ppm

Color 13ppm
* Edge to edge print function is add.
* 2-on-1 and borderless copy are add to a copy function
* Card direct function is add.

Correspondence media Compact Flash

Smart Media
Memory Stick
SD Memory card
Multimedia card
Flash ATA card PCMCIA T ype II
*1: PCMCIA card adapter necessary

Print mode Index

All frames
Single frame

*1

*1

*1

*1

*1

DPOF

2. Parts change

Some parts were changed in accordance with specifications for MultiPASS F80/F60 version.
* SCNT board, PCNT board and Operation panel unit were changed.
* Rear cover, Middle cover and Main freame ass’y were changed.
For changes to other parts, please see the list of defferences that start on Next page.

3. Regarding the ROM Version

It is important to make sure that the ROM used in the product is of the following v ersion or later; ROMs
of older versions are intended for other areas of sale.

MultiPASS F80
MAIN ROM(IC 201)
Parts No.: HH4-3735-000 IC, MR27V1652E-RA, OTP-ROM

MultiPASS F60
MAIN ROM(IC 201)
Parts No.: HH4-3736-000 IC, MR27V1652E-RA, OTP-ROM

MultiPASS F80/F60
PRINTER ROM(IC 301)
Parts No.: HH4-3737-000 IC, MR27V852E-RA, OTP-ROM

Fig. No DISCRIPTION

1- 6 CD-ROM, PRINTER DRIVER HH4-3530-000 HH4-3738-000
2- 4 CD-ROM, PRINTER DRIVER HH4-3596-000 HH4-3138-000
1- 7 USER’S GUIDE(ENGLISH) HT1-2178-000 HT1-2198-000
1- 9,2- 7 PRINT HEAD QY6-0034-000 QY6-0041-000
2- 5 USER’S GUIDE(ENGLISH) HT1-2177-000 HT1-2198-000
3- 1 COVER, REAR HC1-0002-000 HC1-0682-000
3- 3 MODEM BOARD ASS’Y HG1-4382-000 ----­ 5- 1 COVER, REAR HC1-0013-000 HC1-0683-000
5- 2 FRAME, PRESSURE PLATE HC1-0061-000 HC1-0689-000
5- 4 PRESSURE PLATE ASS’Y HL1-0005-000 HL1-0079-000
6- 2 OPERATION PANEL UNIT HM1-0009-000 HM1-0314-000

COVER, PC-CARD ----- HC1-0686-000
FRAME, PC-CARD ----- HC1-0687-000
COVER, PC-CARD LED ----- HC1-0688-000

MultiPASS F50/F30 MultiPASS F80/F60

HM1-0010-000 HM1-0321-000

PC-CARD READER UNIT ----- HH7-2703-000
8- 1 ABSORBER, INK QA4-0005-000 QA4-0662-000
9- 3 SCNT BOARD ASS’Y HG1-4380-000 HG1-4467-000

HG1-4386-000 HG1-4468-000
9- 4 POWER SUPPLY UNIT HH3-5372-000 HH3-5397-000
9- 5 MAIN FRAME ASS’Y HL1-0001-000 HL1-0078-000
18- 1 COVER,MIDDLE HC1-0090-000 HC1-0681-000

HC1-0066-000 HC1-0684-000
19- 3 PCNT BOARD ASS’Y HM1-0006-000 HM1-0299-000
20- 1 PURGE UNIT QG4-0012-000 QG4-0118-000
20- 2 WIPE CLEANER ASS’Y QG4-0022-000 QG4-0117-000
21- 2 SPRING, LEAF QA4-0018-000 QA4-0631-000
21- 4 CARRIAGE UNIT QG4-0011-000 QG4-0121-000
21- 5 SPRING, COIL QS4-2001-000 QS4-2082-000
22- 2 PRESSURE ROLLER ASS’Y QG4-0111-000 QG4-0131-000
22- 3 TIMING SENSOR UNIT QG4-0020-000 QG4-0134-000
22- 4 MOTOR, CARRIAGE QH4-4347-000 QH4-4431-000
23- 1 PLATEN UNIT QG4-0009-000 QG4-0124-000
23- 2 SPUR HOLDER ASS’Y QG4-0010-000 ----­23- ABSORBER, INK ----- QA4-0612-000
24- 1 BELT, FEED ROLLER QA4-0025-000 QA4-0584-000
24- 2 FILM, TIMING SLTT DISK QA4-0026-000 QA4-0590-000
24- 3 FEED ROLLER ASS’Y QF4-0003-000 QF4-0070-000

Fig. No DISCRIPTION

25-BAT1 BATTERY,LITHIUM, CR2032/1HS WK1-5130-000 WK1-5134-000
25-IC201 IC, MR27V1652D66RA,OPT-ROM HH4-3526-000 ----­25-IC201 IC, MR27V852D35RA,OPT-ROM HH4-3539-000 ----­25-IC201 IC, MR27V1652ExxRA,OPT-ROM ----- HH4-3735-000
25-IC201 IC, MR27V1652ExxRA,OPT-ROM ----- HH4-3736-000
26-IC8 IC, MR27V852D39RA,OPT-ROM HH4-3529-000 ----­26-IC301 IC, MR27V852DxxRA,OPT-ROM ----- HH4-3737-000

MultiPASS F50/F30 MultiPASS F80/F60

HH4-3738-000
CD-ROM, PRINTER DRIVER
for MultiPASS F80
HH4-3138-000
CD-ROM, PRINTER DRIVER
for MultiPASS F60

HT1-2198-000
USER’S GUIDE (ENGLISH)

QY6-0041-000
PRINT HEAD

HC1-0682-000
COVER, REAR
for MultiPASS F80
HC1-0683-000
COVER, REAR
for MultiPASS F60

HC1-0689-000
FRAME, PRESSURE PLATE

HL1-0079-000
PRESSURE PLATE ASS’Y

HM1-0314-000
OPERATION PANEL UNIT
for MultiPASS F80

HM1-0321-000
OPERATION PANEL UNIT
for MultiPASS F60

QA4-0662-000
ABSORBER, INK

HG1-4467-000
SCNT BOARD ASS’Y
for MultiPASS F80
HG1-4468-000
SCNT BOARD ASS’Y
for MultiPASS F60

HH3-5397-000
POWER SUPPLY UNIT

HL1-0078-000
MAIN FREME ASS’Y

HC1-0681-000
COVER, MIDDLE
for MultiPASS F80
HC1-0684-000
COVER, MIDDLE
for MultiPASS F60

HM1-0299-000
PCNT BOARD ASS’Y

QG4-0022-000
WIPE CLEANER UNIT

QG4-0012-000
PURGE UNIT

QA4-0631-000
SPRING, LEAF

QS4-2082-000
SPRING, COIL

QG4-0121-000
CARRIAGE UNIT

QG4-0131-000
PRESSURE ROLLER ASS’Y

QG4-0134-000
TIMING SENSOR UNIT

QH4-4431-000
MOTOR, CARRIAGE

QG4-0124-000
PLATEN UNIT

QA4-0612-000
ABSORBER, INK

QA4-0590-000
FILM, TIMING SLIT DISK

QA4-0584-000
BELT, FEED ROLLER

QF4-0070-000
FEED ROLLER ASS’Y

HH4-3735-000
IC, MR27V1652ExxRA, OPT-ROM
for MultiPASS F80
HH4-3736-000
IC, MR27V1652ExxRA, OPT-ROM
for MultiPASS F60

WT3-5134-000
BATTERY, LITHIUM, CR2032/1HS

HH4-3737-000
IC, MR27V852ExxRA, OPT-ROM

HH7-2703-000
PC-CARD READER UNIT

HC1-0688-000
COVER, PC-CARD LED

HC1-0686-000
COVER, PC-CARD

HC1-0689-000
FRAME, PC-CARD

4.Disassembly procedure change of cover ass’y.

Disassembly 5. Middle cover ass’y

(1) Perform Disassembly 3 to remove the flatbet ass’y.
(2) Remove the 2 screws (a), and detach the 2 torsion bars.
(3) Remove the 2 cables (b).
(4) Remove the screw (c), and detach the grounding wire.
(5) Remove the 4 screws (d), and detach the middle cover ass’y.

c

b

Torsion bar

b

Middle cover ass'y

a

d

a

d

Figure 3-11 Disassembly 5

Caution when replacing middle cover ass’y

It would be hazardous to leave the torsion bar mounted to the middle cover assembly, as
the torsion bar is sharp enough to injure your eye, face or hand. Be sure to remove the
torsion bar whenever you are disassembling the middle cover assembly to ensure safety.
Moreover, when you have removed the torsion bar, be sure to place it so that its tips are
at bottom as shown in Figure 3-11A.

Figure 3-11A Torsion bar