Canon IXUS 220HS User Manual

CaHOH

_ower_hot %/

_._oo._ i,,US 220 H5

Camera User Guide

Make sure you read this guide, including the "Safety
Precautions" section before using the camera.
Reading this guide will help ,. learn to use the camera
properly.
Store this guide use it in the future.

Using Various Functions for

Shooting Movies

This chapter serves as a more advanced version of the "Shooting
Movies" and "Viewing Movies" sections in Chapter 1, and explains how
to use various functions for shooting and viewing movies.

This chapter assumes that you have set the mode switch to O.
The latter half of the chapter explaining movie playback and editing

assumes that you have pressed the [] button to enter Playback mode.

107

Just as with still images, you can let the camera select the best settings for
the scene or add various effects while shooting movies.

.....Choose a Shooting mode.

Follow Steps 1 - 2 on p. 64 to choose a

Shooting mode.

shoot.

Press the movie button.
Depending on the Shooting mode or movie

image quality (p. 112) you choose, black
bars may appear on the top and bottom of

the screen. These areas will not be

recorded when shooting.

To stop shooting the movie, press the

movie button again.

_.3 Poitiait p164

Miniature Effect p. 109

[] Monochrome p. 73

Super Vivid p. 68

_, Poster Effect p. 68
,4A CoiorAcceni p. 71

Other Shooting Modes

You can shoot the following kinds of movies in _ mode.

i= supeisiow Shootfistmovingsubeo{sandpiayihembackinslowmoiion

_" Motion Movie (p. 110).

_,_ Beach p. 65
i;_ Unde_ater p. 65

Foliage p. 65

"_" Snow p. 66

108

You can shoot movies that look like moving miniature models. You create the
miniature model effect by choosing the upper and lower portions of the scene
that will be blurred, and the playback speed, which makes people and objects
in the scene move quickly during playback. Audio will not be recorded.

Choose _.

Follow Steps 1 - 2 on p. 64 to choose _.

A white frame (the area that will not be

blurred) appears on the screen.

Choosetheareatokeepin ocus.

Press the MENUbutton for more than one
second.
Move the zoom lever to change the frame

size, and press the ,_'_ buttons to change

the frame position.

Choose a playback speed.

Press the @ button.
Press the _ _ buttons to choose a

playback speed.
Press the @ button to complete the

setting and restore the shooting screen.

Shoot.

Press the movie button.
To stop shooting the movie, press the
movie button again.

Playback Speeds and Estimated Playback Times (for 1 Min.

Clips)

5X Approx. 12 sec.

10X Approx. 6 sec.
20X Approx. 3 sec.

109

Shoot_ngS_p_rslowMotionMov_s

You can shoot fast moving subjects and play them back in slow motion. Audio
wi_ not be recorded.

.... Choose _.

Follow Steps 1 - 2 on p. 64 to choose "_.

Choose a frame rate.

Press the @ button to choose [_, then

press the @ button again.
Choose a frame rate (the number of
frames per second), then press the @

button.

Shoot.

Press the movie button.

The bar showing the shooting time will

appear. Maximum clip length is approx.

30 sec.

To stop shooting the movie, press the

movie button again.

110

Shooting Super Slow Motion Movies

Frame Rates and Playback Times (for 30 Sec. Clips)

240 fps Approx. 4 min.

12ofps Approx:2rain:

The movie will play back in slow motion when you follow Steps 1 - 3 on p. 31.
You can use the included software to change the playback speed of movies shot
in "_ mode. Refer to the Software Guide for details,

111

You can choose among 4 different image quality settings.

.....Choose the image quality setting.

After pressing the @ button, press the
._.v buttons to choose _, then press the
@ button again.

Choose an option.

Press the .A.'_. buttons to choose an

then press the @ button.option,

The option you set will appear on the
screen.

image Quality and Shooting Time per Memory Card

1920 x1080 pixels, For shooting fulI Approx. Approx.

24 frames/sac, high-definition movies. 14 rain. 34 sec. 59 min. 40 sec.
1280 x 720 pixels For shooting Approx

M2_ ' " 1 hr 24mn

30 frameslsec, high-definition mowes. 20 mJn.43 sec. _. "

640 x 480 pixels, higher when compared Approx.
30 frames/sec, with _, butthe recording 43 rain. 43 sec. 2 hr. 59 rain.

320 x 240 pixels, shooting time will I hr. 58 min. 8 hr. 4 min.

_'_ 30 frames/sec, increase, but the image 19sec. 30 sec.

Based on Canon's testing standards.
Recording will automatically stop when the clip file size reaches 4 GB, or when the

recording time reaches approximately 10 minutes when shooting in _ or _, and
approximately 1 hour when shooting in _'_ or _.
Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 6 or higher memory cards are recommended.

The image quality will be Approx.

time will be shorter.

Since the file size is small,

quality will decrease.

Approx. Approx.

Approx.

04 sec.

3 sec.

112

The following functions can be used in the same way as for still images. Some
functions, however, may not be available or may not have an effect
depending on the Shooting mode.

Zooming in More Closely On Subjects
The sound of zoom operations will be recorded.

Using the Self-Timer (p. 58)
Using the Self=Timer to Prevent Camera Shake (p. 59)

Adjusting the White Balance (p. 86)
Changing the Tone of an Image (My Colors) (p. 92)

Shooting Using a TV as the Display (p. 105)
Shooting with the AF Lock (p. 99)

Turning Off the AF Assist Beam (p. 173)
Displaying Grid Lines (p. 174)

Changing the IS-Mode Settings (p. 175)

113

' !ii i ! i! i i i iji! ii !!!i!!ii!ii ii!iiiii!i!i!i!i!i!i!i!!i!i!iiiilii!i!ili!ilili!i!!!!!!iiiiiiiiiiiii!

You can trim the beginnings and ends of recorded movies.

.....choose

Follow Steps 1 - 3 on p. 31 to choose _'{,

then press the @ button.
The movie editing panel and the movie

editing bar will appear.

Movie Editing Panel

Set the editing range.

Press the A'_" buttons and choose &_: or

If you press the _ _ buttons to move _, ok&

will appear at points where the movie can

be edited. If you choose _, you can trim

the beginning of the movie from ok_. If you

Movie Editing Bar

choose _, you can trim the end of the

movie from o_&.
Even if you move _ to a point other than a

ok_, only the portion from the nearest ok_

to the left will be trimmed when &_ is
chosen. Only the portion from the nearest

ok_ to the right will be trimmed when _20 is

chosen.

Check the edited movie.

Press the Av buttons to choose

then press the @ button. The(Play),

edited movie will play.
To edit the movie again, repeat Step 2.
To cancel editing, press the ,_v buttons

to choose _D• After pressing the @

button, press the _ _ buttons to choose
[OK], then press the @ button again.

114

Save the edited movie.

Press the ,,Lv buttons to choose ['._, then
press the @ button.

Press the '_ buttons to choose [New
File], then press the @ button.

The movie wi]l be saved as a new file.

Editing

115

116

Using Various P|ayback and

Editing Functions

This chapter exp,ains various ways to p,ay back and edit images.

Press the [] button to enter Playback mode before operating the camera.

117

Searching images Using index Display

Displaying multiple images at the same time lets you quickly find the image
you want.

........ Images will display in an index.

Movethezoom evertoward

youThemovenumberthe°fleverimagestowardincrease_. each time
The number of images decrease each time

you move the lever toward O,.

Choose an image.

Press the Av { _ buttons to choose an
image,

An orange frame appears on the chosen

image.
Press the @ button to display the chosen

image by itself.

Searching images by Scrolling

Pressing the 4 _, buttons for more than 1 second will display images in a line
letting you quickly search them. You can also jump by the shooting date
(Scroll Display).

Choose an image.

If you set the camera to single image
playback and press the 4_ buttons for

more than 1 second, the screen at the left

will appear. Press the _ buttons to
choose an image.

Press the @ button to restore single
image playback.

Press the Av buttons during scroll
display to search images by the shooting
date.

118

ou,ok,ysooroh,°0,mo0osi!U,!!i!ii!iiii! i i

Viewing Movies Made with Movie Digest

You can select movies made in _ mode (p. 67) by date for viewing.

Choose,_".

After pressing the @ button, press the

,_'_ buttons to choose _, then press the

@ button again.

;: chooseamoviedate.

Press the Av" buttons.

Play the movie.

Press the @ button.
The movie will play.

iiiiiiiii_

119

When there are many images on the memory card, you can filter and display
them by a specified filter. You can also protect (p. 134) or delete (p. 138) all
images at once while filtered.

Choose _?.

After pressing the @ button, press the
Av buttons to choose t_Y,then press the

button again.

Choose a filter.

Press the ._v buttons to choose a filter,
then press the @ button.

View the filtered images.

Press the Av buttons to choose a filter
for playback, then press the @ button

(except for "k).

Filtered playback starts and a yellow frame
appears.

If you press the _, buttons, only the
chosen target images will display.

If you choose _/_ in Step 2, filtered

playback will be canceled.

Search filters

Favorites Displays the images tagged as favorites (p. 140)

(_ Shot Date Displays the images shot on a specified date
_ My Category Displays the images of a specified category (p. 142)
i_ still irnagdMovie DisPiays Still {magesl movies or movies made in _ model

Filters that do not have any corresponding images cannot be chosen.

120

Viewing images in Filtered Playback

In filtered playback (Step 3), you can view filtered images with "Quickly Searching
Images" (p. 118), "Viewing Slideshows" (p. 122), and "Magnifying Images"

(p. 125). You can process all filtered images at once while performing operations
in "Protecting Images" (p. 134), "Erasing Images" (p. 138), or "Choosing Images

for Printing (DPOF)" (p. 159), by choosing all of the filtered images.
However, if you change the category (p. 142), or edit an image and save it as a

new image (p. 146), a message will appear, and filtered playback will cancel.

121

You can automatically play back images recorded to a memory card. Each
image displays for approximately 3 seconds.

Choose0.

After pressing the @ button, press the
Av buttons to choose ,@, then press the

@ button again.

Choose a transition effect.

Press the _'_ buttons to choose an
effect,

then press the @ button.

The slideshow will start a few seconds
after [Loading image...] appears.

In filtered playback (p. 120), only images

matching a filter play back. In group

playback (p. 126), only grouped images

play back.
You can pause/restart a slideshow by

pressing the @ button again.

Press the MENUbutton to stop the
slideshow.

122

Changing Settings

You can set a slideshow to repeat, or change transition effects and the time
that slideshow images are displayed. You can choose from 6 transition
effects when switching between images.

Choose [Slideshow].

Press the MENUbutton to choose
[Slideshow] from the ['_ tab, then press the

@ button.

Chooseasett .g.

Press the Av buttons to choose an item,

then press the ,_ buttons to adjust the

setting.
If you choose [Start] and press the @

button, the slideshow starts with your
settings.

Press the MENU button to restore the
menu screen.

iiiiiiiii_
iiiiiiiii_
iiiiiiiii_

iiiiiiiii_

123

You can magnify the area of a recorded image that was inside the AF Frame
to check the focus.

.....Press the v button to switch to the

focus check display (p. 44).

A white frame will appear where the AF
frame was when the focus was set.

A gray frame will appear on a face
detected during playback.

The area within the orange frame appears

magnified.

Switch frames.

Move the zoom lever toward O, once.
The screen shown on the left will appear.

Press the @ button to move to a different
frame when multiple frames appear.

Change the magnification level or
location.

Use the zoom lever to change the display
size, and the A'_4_ buttons to change

the display position while checking the
focus.

Press the MENU button to reset the
display to Step 1.

124

Approximate Location of

Displayed Area

Move the zoom lever toward 0,.

The display will zoom in on the image. If
you continue to hold the zoom lever, it will

zoom in up to a maximum factor of

approximately 10x.
If you press the ,_'_4_ buttons, you can

move the location of the displayed area.
Move the zoom lever toward _ to zoom

out, or continue to hold it to return to single
image playback.

When _% appears on the screen, press
the @ button to switch to _L+. Press

the 4_ buttons to switch between images
while zoomed. Press the @ button again

to return to the original setting.

125

Grouped images taken in _ mode (p. 80) can also be viewed individually.

.... Choose an image group.

Press the _ _ buttons to choose an image
that displays _D_j.

Choose _.

After pressing the @ button, press the
Av buttons to choose _, then press the

@ button again.

View each image in the group.

If you press the 4_ buttons only the

images in the group will be displayed.
After pressing the @ button, press the

._v buttons to choose _, then press the
C_NT_button again to cancel group playback.

in group playback (Step 3 above), you can use the FUNC. menu functions that
appear when you press the @ button, as well as search (p. 118) and magnify

(p. 125) images. You can process all the images in a group at once while
performing operations in "Protecting Images" (p. 134), "Erasing Images" (p. 138),

or "Printing from the Print List (DPOF)" (p. 159), by choosing a set of grouped
images.

126

Ungrouping Images

Grouped images taken in _j mode can be ungrouped and viewed
individually.

Choose [Group images].

Press the MENUbutton to choose [Group
Images] from the [] tab.

Choose a setting.

Press the 4_ buttons to choose [Off].
Press the MENUbutton to complete the

setting and restore single image playback.
Grouped images taken in _ mode are

ungrouped and appear individually.

To regroup the images, follow the steps

above and select [On].

iiiiiiiii_
iiiiiiiii_
iiiiiiiii_

iiiiiiiii_

127

The camera will choose four images based on the displayed image.
If you choose one of those images, the camera will select four more images
letting you enjoy playing back images in an unexpected order.
This will work best if you take many shots of various scenes.

chooseo.

After pressing the @ button, press the
Av buttons to choose .GD,then press the

@ button again.

Four images will appear as possibilities.

Choose an image.

Press the Av _ _ buttons to choose the

image you want to view next.
The chosen image will be displayed in the

middle, and the next four possibilities will
appear.

Press the @ button to display the middle

image at full size. Press the @ button
again to restore the original display.

Press the MENUbutton to restore single

image playback.

128

You can choose from 3 transition effects when switching between images in
single image playback,

Choose [Transition].

Press the MENUbutton to choose
[Transition] from the [] tab, then press the

4)' buttons to choose a transition effect.

129

Viewing images on a Standard TV

Using the supplied stereo AV cable (p. 2), you can connect the camera to a
TV to view images you have shot.

.... Turn off the camera and TV.

..........................................................................................................Connect the camera to the TV.

insert the cable plug into the camera's
Open the camera's terminal cover and fully

terminal.

Insert the cable plug fully into the video

input terminals as shown in the illustration.

.... Turn on the TV and switch it to the

input the cable is connected to.

Turn on the camera,

Press the [] button to turn on the camera.

411iiiiiiiii!i iiii

The image will appear on the TV (nothing
will appear on the screen of the camera).

After you finish, turn off the camera and
TV, and unplug the cable.

images will not display correctly if the camera's video output setting (NTSC/PAL)
does not match the TV system. Press the MENU button and choose [Video
System] from the ?T tab to switch to the correct video system.

130

Viewing images on a High-Definition TV

Using the separately sold HDMI Cable HTC-10O, you can connectthe camera

to an HD TV to view images you have shot.

Turn off the camera and TV.

Connect the camera to the TV.

Open the camera's terminal cover and fully
insert the cable plug into the camera's

terminal.

Fully insert the cable plug into the TV's
HDMI input.

Display images.

Follow Steps 3 and 4 on p. 130 to display

the images.

iiiiiiiii_
iiiiiiiii_
iiiiiiiii_

iiiiiiiii_

131

Viewing images on aTV

Using a TV Remote to Control the Camera

When you connect the camera to an HDMI CEC compatible TV, you can use
the TV's remote control to operate the camera and play back images or view

slideshows.
You may need to make settings on some TVs. For details, refer to the user

guide supplied with the TV.

Choose [Ctrl via HDMI].

Press the MENUbutton to choose [Ctrl via

HDMI] from the ?T tab, then press the 4)'

buttons to choose [Enable].

Connect the camera to the TV.

Follow Steps 1- 2 on p. I3I to connect the
camera to the TV.

Display images.

Turn on the TV and press the camera's []

button.
The image will appear on the TV (nothing
will appear on the screen of the camera).

Use the TV's remote control.

Press the remote control's 4)' buttons to
choose an image.

Press the OK/Select button to display the
camera control panel. Press the ,_),

buttons to choose an item, then press the
OK/Select button again.

132

Viewing images on a TV

Summary of the Camera Control Panel Displayed on the TV

_ i i i Dispiays gioups of High:speed Bu;st images (oniy appears

_roup p ayeacK

when grouped images are chosen).

P_aymovie Playsamovie(onLyappearswhenamovieisohOsen)_

Slideshow press the remote control's 4 _ buttons to switch images.

_ Index playback Displays images in an index.

DISP. Change display Changes the screen display (p. 44).

Plays back images automatically. During playback, you can

133

You can protect important images so that they cannot be accidentally erased
with the camera (pp. 28, 138).

Protect the image.

After pressing the @ button, press the
Av buttons to choose 0"_, then press the
@ button again.

[Protected] will appear on the screen.
To unlock an image, follow the step above

to choose _ again, then press the @

button.

Using the Menu

.....Choose [Protect].

Press the MENUbutton to choose

[Protect] from the [] tab, then press the
_Tc_button.

Choose a selection method.

Press the A'v" buttons to choose a
selection method, then press the @

button.

Press the MENU button to complete the
setting and restore the menu screen.

134

Protecting _mages

Choosing images |ndividually .....................................................................................

Choose[Select].

;;::Follow Step 2 on p. 134 to choose [Select],

then press the @ button.

Choose images.

Press the _ _ buttons to choose an image,
then press the @ button.

[] will appear on the screen.

Press the @ button again to dese}ect the

image. [] will disappear.

To choose additional images, repeat the

above procedure.

Profit the mage,

If you press the MENU button, a
confirmation screen will appear.
Press the 4 _ buttons to choose [OK], then

press the @ button.

135