Canon iR2016, iR2020 f-im-6467-000

Super G3 FAX Board-T1
Installation Procedure

Follow the instructions herein when installing the Super G3 FAX Board-T1

to its host machine.

PUB No.F-IM-6467-000 PRINTED IN JAPAN or CHINA

E N G L I S H

1.1 Unpacking and Checking the Components

1.1.1 Checking the Contents

In addition to this unit, you will need a fax panel unit (Fax Panel-A1) to enable the iR machine's fax functions.

MEMO:

If the machine is already equipped with an optional Inner 2-Way Tray-E1, you may skip the steps given for the
mounting of the full state sensor unit.

[5]

[1]

[13]

[6]

[14]

[2]

[7]

F-1-1

[8]

[15]

[3]

[10][9]

[16] [17]

[11] [12]

[4]

[1] Fax Unit 1 pc. [10] Edge Saddle (black) 1 pc.

[2] Modem PCB 1 pc. [11] Wire Saddle (white) 2 pc.

[3] Full state Sensor Unit 1 pc. [12] Stamp Ink Cartridge 1 pc.

[4] LAN Cover (EUR, AU, KR only) 1 pc. [13] Screw (M3X8) 10 pc.

[5] Telephone Cord 1 pc. [14] Fax Approval Label (EUR only) 1 pc.

Telephone Cord (EUR only) 4 pc. A-TICK Label (AU only) 1 pc.

[6] NCU-PSU Cable 1 pc. [15] Facsimile Guide (US only) 1 pc.

[7] Modem-NCU Cable 1 pc. [16] Facsimile Guide CD-ROM (out side US) 1 pc.

[8] IP-Modem Cable 1 pc. [17] FAX Driver CD-ROM (out side TW) 1 pc.

[9] Modem-NCU Cable 1 pc. FAX Driver CD-ROMt (TW only) 2 pc.

2

1.2 Installation Procedure

1.2.1 Installation Proce-

dure

1) Turn off the main power switch, and disconnect the

power plug from the power outlet.

2) Remove the machine's rear cover [1].

- 2 screws [2]

[2]

MEMO:

If a LAN cover exits,

1) Remove the LAN cover [1].

- 4 screws [2].

[2]

[1]

F-1-2

3) Remove the machine's rear left cover [1].

- 3 screws [2].

[2]

[1]

[2]

F-1-4

4) Mount the modem PCB [1].

- 1 connector [2].

- 3 screws (M3X8) [3]

[1]

[3]

F-1-5

[1]

[2]

F-1-3

3