Canon iR2016, iR2020 ir2020-007

Service Bulletin

Issued by Canon Europa N.V.

Copier B/W

Hardware

Model:
iR2016

iR2016i
iR2016J
iR2020
iR2020i

Revised:

Addition of factory work

Location:

Machine Front Plate

Subject:

Installation and relocation

Detail:

When the Grip [1] found on the side of the machine is pulled with excessive force or the machine is tilted in the course
of installation or relocation work, the Grip can fall out of the machine.

Ref No.:

iR2020-007 Rev. 1
(F1-T01-0L7-10044-02)

Date:

April, 2006

[1] Grip

<Factory measures>

Add Stoppers [1] to the Grip at the front (P-1) and rear (P-2) of the machine (the orientation is different between
front and rear stoppers).
Also, add a Spacer [2] to the Inner Panel (P-3) so that the Grips fit the machine well.

(1/3)

iR2020-007 Rev. 1

P-1 Grip (at the front) P-2 Grip (at the rear)
[A] Enlarged view of the Grip (at the front) [C] Enlarged view of the Grip (at the rear)
[B] Stopper mounting figure [D] Stopper mounting figure

[1] Stopper

(2/3)