Brother DCP-8070D Setup Guide

Quick Setup Guide

Start Here

Before you can use the machine, read this Quick Setup Guide for the correct setup and installation. To help you get your machine ready for use as soon as possible this guide leaves most of your machine's features at their factory default settings. For detailed information on how to use all the features, change the default settings, or to troubleshoot your machine please refer to the User's Guide. To view the Quick Setup Guide in other languages, please visit http://solutions.brother.com/

DCP-8070D

IMPORTANT

DO NOT connect the interface cable yet.

Unpack the machine and check the components

USB Interface Cable User’s Guide

AC Power Cord Quick Setup Guide

Drum Unit Assembly

(including Standard Toner Cartridge)

CD-ROMs

(Windows (Macintosh)

)

WARNING

Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep these bags away from babies and children.

Note

• The components included in the box may differ depending on your country.

• Save all packing materials and the box in case for any reason you must ship your machine.

• To ensure safe operation the supplied plug must be inserted only into a standard power outlet that is properly grounded through the standard electrical wiring. Non grounded equipment may cause an electrical shock hazard, and may cause excessive electrical noise radiation.

USB cable

• Please make sure you use a USB 2.0 cable (Type A/B) that is no longer than 2 metres.

• DO NOT connect the interface cable at this time. Connecting the interface cable is done during MFL-Pro installation process.

• When you use a USB cable, make sure you connect it to the USB port of your computer and not to a USB port on a keyboard or non-powered USB hub.

CHN-ENG Version 0

Symbols used in this guide

WARNING

CAUTION

IMPORTANT

Note

User’s Guide Software User’s Guide

CAUTION

When you move the machine, grasp the side hand holds that are located at the bottom of the machine. DO NOT carry the machine by holding the scanner unit.

WARNINGs tell you what to do to prevent possible personal injury.

CAUTIONs specify procedures you must follow or avoid to prevent possible minor injuries.

IMPORTANT describes procedures you must follow or avoid to prevent possible machine problems or machine damage, or damage to other objects.

Electrical Hazard icons alert you to a possible electrical shock.

Hot Surface icons warn you not to touch machine parts that are hot.

Notes tell you how you should respond to a situation that may arise or give tips about how the current operation works with other features.

Indicates reference to the User’s Guide or Software User’s Guide.

Note

Keep a minimum gap around the machine as shown in the illustration.

300 mm

200 mm

500 mm

130 mm

Install the drum unit and

IMPORTANT

DO NOT connect the interface cable yet.

toner cartridge assembly

a Remove the protective tape and film covering

the scanner glass.

b Press the front cover release button and open

the front cover a.

d Gently shake it from side to side several times

to distribute the toner evenly inside the assembly.

e Put the drum unit assembly into the machine

until it clicks into place.

c Unpack the drum unit and toner cartridge

assembly.

f Close the front cover of the machine.

Load paper in the paper

tray

a Pull the paper tray completely out of the

machine.

b While pressing the blue paper-guide release

lever a, slide the paper guides to fit the paper size you are loading in the tray. Make sure that the guides are firmly in the slots.

d Put paper in the tray, and make sure that the

paper is below the maximum paper mark a. The side to be printed on must be face down.

IMPORTANT

Make sure the paper guides touch the sides of the paper so it will feed correctly.

e Put the paper tray firmly back in the machine.

Ma k e sure tha t it is co mpletely inserted into the machine.

c Fan the stack of paper well to avoid paper jams

and misfeeds.

f Unfold the support flap a to prevent paper

from sliding off the output tray.

Connect the power cord

Choose your language (if needed)

IMPORTANT

DO NOT connect the interface cable yet.

a Make sure that the machine power switch is off.

Connect the AC power cord to the machine.

b Plug the AC power cord into an AC outlet. Turn

the power switch on.

a Press Menu. b Press 1. c Press 0.

d Press or to choose your language.

Press OK.

e Press Stop/Exit.

Set the LCD contrast

If you are having difficulty reading the LCD, try changing the contrast setting.

(if needed)

a Press Menu. b Press 1. c Press 5.

d Press to increase the contrast.

—OR—

Press to decrease the contrast.

Press OK.

e Press Stop/Exit.

g Enter the time in 24-hour format on the dial

pad, and then press OK.

Date&Time Time:15:25

(e.g. Enter 1 5, 2 5 for 3:25 P.M.)

h Press Stop/Exit.

Set the date and time

This setting allows the machine to name files created when using the Scan to USB feature.

a Press Menu. b Press 5. c Press 1. d Enter the last two digits of the year on the dial

pad, and then press OK.

Date&Time Year:2009

(e.g. Enter 0, 9 for 2009.)

e Enter the two digits for the month on the dial

pad, and then press OK.

Date&Time Month:03

(e.g. Enter 0, 3 for March.)

f Enter the two digits for the day on the dial pad,

and then press OK.

Date&Time Day:25

(e.g. Enter 2, 5.)

Choose your connection type

For USB Interface Users

Windows®, go to page 8 Macintosh, go to page 12

Windows

USB

Macintosh

USB

For USB Interface Users (Windows Windows Vista

2000 Professional/XP/XP Professional x64 Edition/

)

Windows

Before you install

a Make sure that your computer is ON and you

are logged on with Administrator rights.

IMPORTANT

• DO NOT connect the USB cable yet.

• If there are any programs running, close them.

• Make sure a USB Flash memory drive is not inserted into the machine.

• The screen may differ depending on the operating system.

b Turn off and unplug the machine from the AC

outlet and disconnect it from your computer, if you already connected an interface cable.

Install MFL-Pro Suite

a Put the supplied CD-ROM into your CD-ROM

drive. If the model name screen appears, choose your machine. If the language screen appears, choose your language.

Note

If the Brother screen does not appear automatically, go to My Computer (Computer), double-click the CD-ROM icon, and then double-click Start.exe.

b The CD-ROM top menu will appear. Click

Initial Installation.

c Click Install MFL-Pro Suite.

USB

Windows

Note

• If the installation does not continue automatically, open the top menu again by ejecting and then reinserting the CD-ROM or double-click the Start.exe program from the root folder, and continue from step c to install MFL-Pro Suite.

• For Windows Vista

User Account Control screen appears, click Allow.

, when the

d When the Presto! PageManager License

Agreement window appears, click Yes if you agree to the Software License Agreement.

g Choose Standard, and then click Next. The

installation continues.

Note

If you want to install the PS driver (Brother’s BR-Script Driver), choose Custom and then follow the on-screen instructions. When the

Select Features screen appears, check PS Printer Driver, and then continue following

the on-screen instructions.

h If you do not want to monitor the machine

status and error notifications from your computer, uncheck Enable Status Monitor and then click Next.

Windows

USB

Macintosh

e The installation of Presto! PageManager will

automatically start and is followed by the installation of MFL-Pro Suite.

f When the Brother MFL-Pro Suite Software

License Agreement window appears, click Yes if you agree to the Software License Agreement.

i When this screen appears, go to the next step.

USB

Windows