Bradford White RE240L6, RE230L6, RE230LN6, RE240LN6, RE250LN6 User Manual

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526;

6,684,821; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888;

5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845;

2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas

®

and Hydrojet

®

are registered trademarks of Bradford White

®

Corporation.

Residential Lowboy

Electric Water Heater

The Lowboy Electric Models Feature:

■ Blanketed & Non-Blanketed Models Available—Non-Blanketed models

(RE120L6, RE230LN6, RE240LN6, RE250LN6) help to decrease overall

installation time and are perfect for new construction applications. Blanketed

models (RE130L6, RE230L6, & RE240L6) provide more installation flexibility

and are ideal for replacement applications.

■ Low Restrictive Brass Drain Valve—Durable tamper proof design.

■ Fully Automatic Thermostat Controls—Fast acting surface-mount

thermostat with high limit energy cut-off (manual reset) for safety.

■ Direct Heat Transfer with Immersed Elements—Transfers heat directly

and efficiently to the water. Screw-in style.

■ Factory-Installed Hydrojet

®

Total Performance System—Sediment

reducing device that also increases first hour delivery of hot water while

minimizing temperature build-up in tank.

■ Vitraglas

®

Lining—An exclusively engineered enamel formula that provides

superior tank protection from the highly corrosive effects of hot water. This

formula (Vitraglas

®

) is fused to the steel surface by firing at a temperature of

over 1600°F (871°C).

■ Insulation System—Non-CFC foam covers the sides and top of the tank,

reducing heat loss. This results in less energy consumption, improved

efficiencies, and jacket rigidity. Blanketed models additionally use a supplied

flexible fiberglass insulation blanket.

■ Water Connections—3⁄4" (19mm) NPT factory-installed true dielectric fittings

extend water heater life and simplify water line connections.

■ Factory-Installed Heat Traps—Design incorporates a flexible disk that

reduces heat loss in piping and eliminates the potential for noise generation.

(Except for RE120L6).

■ Protective Magnesium Anode Rod—Provides added protection against

corrosion for long-term, trouble-free service.

■ Non-Simultaneous Operation—Non-Simultaneous operation indicates only

one heating element will operate at a time and is standard construction from

the factory. Simultaneous Operation indicates both heating elements have the

potential to operate at the same time and is available as an option (must be

specified when ordering).

■ Voltages Available—120V, 208V, 240V, 277V, 480V.

■ Single Phase or Three Phase Operation Available—120V & 277V may

only be wired for single phase operation.

■ T&P Relief Valve—Installed, side T&P is standard. Optional top T&P location

is available.

■ Design evaluated by ETL in accordance with Part 280.707(d) of HUD

Mobile Home Construction and Safety Standards for Energy Efficiency.

Photo is of

RE240LN6

1203-C-1118

Copper Screw Type Immersion Element

(INCOLOY

®

type immersion element available upon request)

6 or 10-Year Limited Tank Warranties / 6 or 10-Year Limited Warranty on Component Parts.

For more information on warranty, please visit www.bradfordwhite.com

For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties. See complete

copy of the warranty included with the heater.