Bosch FAA-440-B4-ISO, FPE-1000-SLC, FPE-1000-NW, FPE-1000-NF, FPE-1000-NE Quick Selection Guide

...

Quick Selection Guide

FPA-1000-V2 Network Fire Panel

Analog Fire Detector 440 Series

instant access to important system functions,

device, streamlining installation and reducing

Processing (ISP), which uses a sophisticated,

not detected, a trouble message is generated

Analog Addressable Fire Systems

Intelligent detection. Superior protection.A focused direction in fire protection

With features that enable easier programming, installation and system management, the new FPA-1000-V2 offers a wealth of benefits for both installers and end users.

Plug-and-play installation

Networking module mounts to the panel slot, requiring less wiring and no need for separate power and supervision.

Remote programming & diagnostics

A set of interactive Web pages provide

such as status, programming, diagnostic tools and test data. This unique feature enables programming and diagnostic cababilities using any browser-enabled

time required for servicing the system.

IP-based reporting

Built-in Bosch Conettix IP technology communicates over local or wide area networks for faster alarm reporting and reduced costs.

Integrated gas detection

The first combination panel listed for both fire and carbon monoxide (CO) alarm. Complies with new CO regulation requiring this hazardous gas be monitored and reported.

Enhanced safety and efficiency

Extra-large buttons allow operation of the keypad control while wearing protective gloves.

More points, more protection

Networking capbilities support more than 2000 addressable points in one system for campuses or other large commercial environments. All connected panels can easily be programmed and controlled via any panel.

Suited to a wide range of applications

The FPA-1000-V2 Panel now offers networking capabilities to support a wide variety of medium to large applications:

► Retail - single-building applications ► Schools and Universities ► Apartment Buildings ► Manufacturing plants ► Warehouses ► Office Complexes ► Military Bases ► Government Installations ► Healthcare Facilities

The Automatic Fire Detector 440 Series is an innovative addition to Bosch’s expanding fire systems portfolio. These advanced analog addressable detectors feature Dual Ray Technology and Intelligent Signal Processing — setting the standard for reliable fire detection and false alarm prevention.

Multicriteria and multisensor fire detection

Multicriteria detectors better distinguish between fire and non-fire conditions to reduce false alarms in areas with challenging environmental conditions. The analog addressable 440 Series gives you a choice of heat, optical smoke, or a combination of optical smoke and heat.

And, our most advanced model represents a step forward for the fire detection industry — a multicriteria detector that identifies the presence of smoke, heat and carbon monoxide (CO) for maximum reliability.

Intelligent Signal Processing

Each detector features Intelligent Signal

high speed microprocessor to analyze signals from each sensor. A complex algorithm ensures the sensor pattern matches that of a real fire scenario to provide immunity against possible false alarm triggers.

This advanced technology significantly reduces false alarm rates and provides more accurate fire detection, while also achieving faster recognition of different types of fires.

Reliable, affordable performance

The 440 series features a unique selfmonitoring feature. If sensor functionality is

and reported back to the panel. This helps ensure each area of your facility is always being monitored. In addition, a triple-color LED indicates status, including normal, trouble or alarm.

Detect even the smallest particles

The new dual-optical variants in the 440 Series use Bosch's Dual Ray Technology for even greater precision. Dual Ray Technology determines smoke density and particle size by comparing the intensity of scattered light from the differing wavelengths of two LED sources, one infrared and one blue.

Bosch's powerful fire-detection algorithm provides exceptional differentiation between smoke particles and other particles — like dust and steam — that can cause a false alarm in other detectors. As a result, the Dual Ray detectors provide earlier, more reliable fire detection and produce fewer false alarms.

Photoelectric Heat MultiSensor MultiCriteria Dual-Photoelectric MultiSensor MultiCriteria Base Type Standard Isolator

Single — Single Single Dual Dual Dual Indictor LED § No Multicolor

○ ● ● ● ○ ● ●

○ ○ ○ ● ○ ○ ●

Adjustable

—

Adjustable

6-inch

—

Adjustable

135° F

— 135° F

135° F

— Programmable — — — — —

SLC Loop SLC Loop SLC Loop SLC Loop SLC Loop SLC Loop SLC Loop

1 to 254 1 to 254 1 to 254 1 to 254 1 to 254 1 to 254 1 to 254

Rotary Switch Rotary Switch Rotary Switch Rotary Switch Rotary Switch Rotary Switch Rotary Switch

6 mA 6 mA 6 mA 6 mA 6 mA 6 mA 6 mA

0.17 mA 0.17 mA 0.17 mA 0.17 mA 0.17 mA 0.17 mA 0.17 mA

24 - 41 VDC 24 - 41 VDC 24 - 41 VDC 24 - 41 VDC 24 - 41 VDC 24 - 41 VDC 24 - 41 VDC

50 Ω 50 Ω 50 Ω 50 Ω 50 Ω 50 Ω 50 Ω

18 AWG 4000 ft (1200 m) 4000 ft (1200 m) 4000 ft (1200 m) 4000 ft (1200 m) 4000 ft (1200 m) 4000 ft (1200 m) 4000 ft (1200 m)

18 AWG 6225 ft (1900 m) 6225 ft (1900 m) 6225 ft (1900 m) 6225 ft (1900 m) 6225 ft (1900 m) 6225 ft (1900 m) 6225 ft (1900 m)

14 AWG 7200 ft (2200 m) 7200 ft (2200 m) 7200 ft (2200 m) 7200 ft (2200 m) 7200 ft (2200 m) 7200 ft (2200 m) 7200 ft (2200 m)

12 AWG

4000 ft (1200 m)

Remote

< 10 ft (3m) from

IP 42 IP 42 IP 42 IP 42 IP 42 IP 42 IP 42

< 95% < 95% < 95% < 95% < 95% < 95% < 95%

32° to 100° F **

CYCOLOY / ABS CYCOLOY / ABS CYCOLOY / ABS CYCOLOY / ABS CYCOLOY / ABS CYCOLOY / ABS CYCOLOY / ABS

4000 ft/min

Multicolor Multicolor Multicolor Multicolor Multicolor Multicolor Multicolor

4.4 x 2.0 in.

Thermal sensor

Method

Range

Rate-of-Rise

Smoke Sensitvity

Quick Selection Guide

Detector Type

Addressing

6.6 x 0.94 in.

5.3 x 0.94 in.

4-inch

Max. Line resistance

Current Draw -

Environmental

Mechanical

Protection category

Housing

Operating

Analog Addressable Fire Systems

Series 440

Sensor

Electrical

Optical Sensor

Chemical (CO gas)

Heat Sensitivity

Communication

Current Draw - Alarm

Operating voltage

Wiring

Indicator

Relative Humidity

Temperature

FAP-440 FAH-440 FAP-440-T FAP-440-TC FAP-440-D FAP-440-DT FAP-440-DTC

1.25 to 3.5 %/ft

base

(0° to 38° C)

135° to 194° F (57° to 90° C)

base

(0° to 38° C)

1.25 to 3.5 %/ft

(57° C)

base

(0° to 38° C)

1.25 to 3.5 %/ft

(57° C)

base

(0° to 38° C)

1.25 to 3.5 %/ft

base

(0° to 38° C)

1.25 to 3.5 %/ft

(57° C)

base

(0° to 38° C)

1.25 to 3.5 %/ft

(57° C)

base

(0° to 38° C)

(base only)

FAA-440-B4 FAA-440-B6

(13.5 x 2.4 cm)

(16.8 x 2.4 cm)

FAA-440-B4 ISO FAA-440-B6 ISO

(13.5 x 2.4 cm)

Max. Airflow

Indictor LED

Dimensions

(20 m/s)

(11.2 x 5.1 cm)

** FAH-440: If the sensitivity temperature is programmed within a range of +175°F to +249°F (+79.4°C to +120.6°C), the maximum installation temperature is +150°F (+66°C)

(20 m/s)

(11.2 x 5.1 cm)

(20 m/s)

(11.2 x 5.1 cm)

(20 m/s)

(11.2 x 5.1 cm)

(20 m/s)

(11.2 x 5.1 cm)

(20 m/s)

(11.2 x 5.1 cm)

(20 m/s)

(11.2 x 5.1 cm)

+ 2 hidden pages