Bosch D9210C Specsheet

Intrusion Alarm Systems | D9210C Access Control Interface Module

D9210C Access Control Interface Module

www.boschsecurity.com

u Direct interface to 26‑bit Wiegand card readers

u Onboard buzzer output

u Supervised onboard point

The D9210C Access Control Interface Module is a fully
supervised, addressable SDI bus device that allows
access control integration for Bosch G Series Control
Panels. This highly reliable module offers 14
programmable levels of access authority. Authority for
access is controlled by the level of the user, the time
of day, the state of the door and the armed state of
the area. Each of the authority restrictions can be
controlled through automatic and manual functions.
Users can be added to the system with local
programming using RPS (Remote Programming
Software), D5200, or with credentials using the Add
User function through keypads.

Functions

Reader Input

• Standard 5-wire Weigand interface.

• +5 VDC or +12 VDC supplied to power readers.

• Open collector output for reader LED.

Unsupervised Inputs

• Tamper – supports normally open devices.

• REX – supports normally open devices. Request to
Exit on short.

• RTE – supports normally open devices. Request to
Enter on short.

Supervised Input

• 1000Ω End of line resistor.

• Use for door contact.

u Request to Exit and Request to Enter inputs that

can have a shunt only option

u Four door states: Locked, Unlocked, Secured, Fire

Unlock

Door States

Four-door states are controlled through the keypad,
RPS (Remote Programming Software), scheduled
events (Skeds) and automatic programmable functions
in the D9210C parameters:

• Locked: Lock Relay de-activated thru valid credential
or RTE (Request to Exit) input.

• Unlocked: allows the door to be opened for free
access. Lock Relay is activated.

• Secured: does not allow access unless a Fire Unlock
occurs. Valid credential or RTE will not activate relay.

• Fire Unlock: allows free access no matter what the
previous door state or armed state is. This is a
programmable option that can be used to allow free
access into or out off the building upon a fire alarm.

Two automatic functions link the door state to the
arming state of the area:

• Auto Door: When the area is disarmed, the door state
is switched to “Unlocked.”

• Disarm on Open: with this function as "Yes," a user
with valid access rights will activate the strike and
disarm the system after the door is opened. With this
function as "No," the area will disarm upon the strike
activation.

Indicators

• Heartbeat LED: Blue LED blinks on and off when
system is operational. A steady On or Off LED
indicates a system error.

2 | D9210C Access Control Interface Module

• Reader LED: Rapidly blinking LED indicates the Card
data is being received. When the LED is off, no card
data is being received.

Certifications and approvals

USA UL D9210C Series: ALVY: (UL294):

Access Control System Units AMCX:
Central Station Alarm Units (UL1610),
AOTX: Local Alarm Units (UL609),
APAW: Police Station Alarm Units
(UL365), APOU: Propriety Alarm Units
(UL1076), NBSX: (UL1023):
Household Burglar Alarm System
Units, UOTU: (UL985): Control Units
and Accessories – Household System
Type, UOXX: Control Unit Accessories,
System (UL864)

Region Certification

USA CSFM 7167-1615:0243 7167 -- CONTROL

UNIT (HOUSEHOLD)

CSFM 7165-1615:0242 7165 -- FIRE ALARM

CONTROL UNIT (COMMERCIAL)

Installation/configuration notes

The D9210C Access Control Interface Module is
individually programmed through the control panel it is
connected to.

Compatibility Information

Category Commercial Code Description

Readers and ARD-AYH12 EM Prox Wall Mount

Accessories ARD-AYJ12 EM Prox Mullion

ARD-AYK12 EM Prox Mini Mullion

ARD-AYQ12 EM Prox Wall Mount Vandal

Resistant

ARD-AYCE65B EM Prox or PIN Mullion

ARD-R10 HID iClass Mini Mullion

ARD-R40 HID iClass Wall Mount

D8223 HID Prox Wall Mount

D8224 HID Prox Mullion

D8224‑SP HID Prox Switch Plate Mount

D8225 HID Prox Mini Mullion

D8229 PIN Reader

Credentials ACA-ATR13 EM Tokens

ACD-ATR11ISO EM Cards

ACD-ATR14CS EM Clamshell Cards

ACD-IC2K26-50 iClass Cards

ACT-IC2K26-10 iClass Tokens

D8236‑10 HID Prox Cards

D8236KF‑10 HID Prox Tokens

Systems D9412GV4 Control Panel

D7412GV4 Control Panel

D9412GV3 Control Panel

D7412GV3 Control Panel

D9412GV2 Control Panel

D7412GV2 Control Panel

D9412G Control Panel

D7412G Control Panel

Parts included

Quantity Component

1 D9210C

1 1 kΩ ½ watt end of line resistor

3 # 6x3/8 self-tapping sheet metal screws to secure the

module to mounting skirt or enclosure

Technical specifications

Environmental Considerations

Relative Humidity Up to 93% non-condensing

Temperature Operating 0° to +49°C (+32° to +120°F)

Electrical Requirements

Current Draw: 110 mA max (Board) +150 mA max

Voltage (operating) 8.5 – 13.8 V

(Reader)

Reader Requirements

+5.2 VDC Power out to 5.2

VDC card reader

DATA 0 Data 0 input

from card reader

DATA 1 Data 1 input

from card reader

BUZZER Buzzer common

upon strike
activation

LED LED common

upon card read
response and
strike activation

5 V +/- 0.25 V for 20 to
140 mA load
150 mA maximum
continuous

High impedance input
with 47 kΩ pull up to
+5.2 V

High impedance input
with 47 kΩ pull up to
+5.2 V

Sink up to 35 mA from
5-14 VDC source
Output impedance is
100Ω

Sink up to 35 mA from
5-14 VDC source
Output impedance is
180Ω

3 | D9210C Access Control Interface Module

Represented by:

Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:

Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.us

Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[e-mail]
www.boschsecurity.com

Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.asia

Bosch (Shanghai) Security Systems Ltd.
203 Building, No. 333 Fuquan Road
North IBP
Changning District, Shanghai
200335 China
Phone [phone]
Fax: [phone]
www.boschsecurity.com.cn

Robert Bosch Ltda Security Systems Division
Via Anhanguera, Km 98
CEP 13065-900
Campinas, Sao Paulo, Brazil
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.com

© Bosch Security Systems 2015 | Data subject to change without notice
19888616331 | en, V1, 21. Jul 2015

Lock Relay (Dry Contact SPDT)

Supports: 12 VDC at 2A

24 VDC at 2.5 A
12/24 VAC at 1 A

Compatibility

Compatible Panels Bosch Security Systems, Inc.

D9412GV4/D7412GV4/
D9412GV3/D7412GV3/
D9412GV2/D7412GV2/D9412G/
D7412G/D9412/D7412

Mechanical

Dimensions (76.2 mm x 127 mm x 25.4 mm)

3 in x 5 in x 1 in

Trademarks

Wiegand is a copyright of HID GLOBAL.

Ordering information

D9210C Access Control Interface Module

Fully supervised, addressable SDI bus device that
allows access control integration for Bosch G Series
Control Panels.

Order number D9210C

Accessories

D203 Enclosure

Works with input, output, and receiver modules where
the circuit boards have through-hole or three-point
mounting systems.

Order number D203

D8103 Enclosure

Grey steel enclosure measuring 41 cm x 41 cm x 9 cm
(16 in. x 16 in. x 3.5 in.).

Order number D8103

D8108A Attack Resistant Enclosure

Grey steel enclosure measuring 41 cm x 41 cm x 9 cm
(16 in. x 16 in. x 3.5 in.). UL Listed. Includes lock and
key set. B520, B4512, and B5512 require the B12
mounting plate.

Order number D8108A

D8109 Fire Enclosure

Red steel enclosure measuring 40.6 cm x 40.6 cm x 8.9
cm (16 in. x 16 in. x 3.5 in). UL Listed. Includes a lock
and key set.

Order number D8109