OBJ_DOKU-32606-001.fm Page 1 Thursday, October 11, 2012 4:37 PM
Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
Germany
www.bosch-garden.com
ART 35
F 016 L70 955 (2012.10) O / 14 XXX
en Original instructions
Page 2
OBJ_DOKU-32608-001.fm Page 2 Friday, October 12, 2012 10:36 AM
2 | English
English
Safety Notes
Warning! Read these instructions carefully, be familiar
with the controls and the proper use of the machine.
Please keep the instructions safe for later use!
Explanation of symbols
General hazard safety alert.
Read instruction manual.
Pay attention that bystanders are not injured
through foreign objects thrown from the machine.
Warning: Keep a safe distance from the machine
when operating.
Switch off and remove plug from mains before adjusting, cleaning or if the cable is entangled and
before leaving the garden product unattended for
any period. Keep the supply flexible cord away
from the cutting line.
Wear eye and ear protection.
Do not work in the rain or leave the trimmer outdoors whilst it is raining.
Beware of thrown or flying objects to bystanders.
Warning: Keep a safe distance from the machine when ope r-
ating.
Machine-specific Safety Warnings
This machine is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use
of the machine by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the machine.
Never allow children or people unfamiliar with these in-
structions to use the trimmer. Local regulations may restrict the age of the operator. When not in use, store the
trimmer out of reach of children.
Never operate the trimmer with missing or broken guards
or shields or without guards or shields in position.
Before use check the supply and extension cord for signs
of damage or ageing. If the cord becomes damaged during
use, disconnect the cord from the supply immediately. DO
NOT TOUCH THE CORD BEFORE DISCONNECTING THE
SUPPLY. Do not use the trimmer if the cord is damaged or
worn.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Keep extension cords away from cutting elements.
Before using the machine and after impact, check for signs
of wear or damage and repair if necessary.
Never operate the product when you are tired, ill or under
the influence of alcohol, drugs or medicine.
Always wear long heavy trousers, boots and gloves. Do not
wear loose clothing, jewellery, short trousers, sandals or
go barefoot. Secure hair so that it is above shoulder level to
avoid entanglement in moving parts.
Wear safety eye protection and ear defenders when
operating the machine.
Keep firm footings and balance. Do not overreach.
Never work with this trimmer while people, especially chil-
dren or pets are nearby.
The operator or user is responsible for accidents or haz-
ards occurring to other people or their property.
Wait until the cutting head has completely stopped before
touching it. The head continues to rotate after the trimmer
is switched off, a cutting head can cause injury.
Work only in daylight or in good artificial light.
Operating the trimmer in wet grass decreases the efficien-
cy of performance.
Switch off when transporting the trimmer to and from the
area to be worked on.
Switch on the trimmer with hands and feet well away from
the rotating line.
Do not put hands or feet near the cutting line.
Never fit metal cutting elements to this trimmer.
F 016 L70 955 | (12.10.12)Bosch Power Tools
Page 3
OBJ_DOKU-32608-001.fm Page 3 Friday, October 12, 2012 10:36 AM
English | 3
Inspect and maintain the trimmer regularly.
Have the trimmer repaired only by an authorized customer
service agent.
Always ensure that the ventilation slots are kept clear of
debris.
Take care against injury from the blade fitted for cutting
the nylon line length. After feeding line always return the
trimmer to its horizontal operating position before switching on.
Switch off and remove the plug from the socket:
– whenever you leave the machine unattended for any
period
– before replacing the cutting lline
– if the cable is entangled
– before cleaning or working on the line trimmer
– before removing the trimmer attachment
After use, disconnect the machine from the mains and
check for damage.
Store the machine in a secure, dry place out of the reach of
children. Do not place other objects on top of the machine.
Replace worn or damaged parts for safety.
Ensure replacement parts fitted are Bosch approved.
Do not operate the machine without the t rimmer at-
techment fitted.
Electrical Safety
Warning! Switch off, remove plug from mains before
adjusting, cleaning or if cable is cut, damaged or entangled.
The cutting line continues to rotate for a few seconds
after the trimmer is switched off.
Caution – do not touch rotating cutting line.
Your machine is double insulated for safety and requires no
earth connection. The operating voltage is 230 V AC, 50 Hz
(for non-EU countries 220 V). Only use approved extension
cables. Contact your Bosch Service Centre for details.
It is recommended for increased electrical safety to use a
Residual Current Device (RCD) with a tripping current of
not more than 30 mA. Always check your RCD every time
you use it.
For products not sold in GB:
WARNING: For your safety, it is required that the plug at-
tached to the machine is connected with the extension cord.
The coupling of the extension cord must be protected against
splash water, be made of rubber or coated with rubber. The
extension cord must be used with a cable strain relief.
The connection lead must be inspected for signs of damage at
regular intervals and may only be used if in perfect condition.
If the supply cord is damaged, it must be replaced by a Bosch
Service Centre.
Extension cords/leads should only be used if they comply
with H05VV-F or H05RN-F types.
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an authorised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a residual current device (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols are important for reading and understanding the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.
SymbolMeaning
Wear protective gloves
Do not use flowing water to clean the
machine
Reaction direction
Movement direction
Switching On
Switching Off
Prohibited action
Accessories/Spare Parts
Intended Use
The machine is intended for the cutting of grass and weeds
under bushes, as well as on slopes and edges that can not be
reached with the lawn mower.
Intended use is related to operation within 0 ° C and 40 ° C
ambient temperature.
Bosch Power ToolsF 016 L70 955 | (12.10.12)
Page 4
OBJ_DOKU-32608-001.fm Page 4 Friday, October 12, 2012 10:36 AM
4 | English
Technical Data
Line trimmerART 35
Article number
Rated power
No-load speed
Cutting line feed
0 600 878 M..
W600
-1
min
Bump feed
8000
Adjustable handle
Cutting line diameter
Cutting diameter
Cutting spool capacity
mm1.6
cm35
m8
Weight according to
EPTA-Procedure 01/2003
Protection class
Serial number
kg4.6
/II
see type plate on the gar-
den product
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your garde n
product. The trade names of the individual garden pro ducts may vary.
Noise/Vibration Information
Measured sound values determined according to EN 60335.
Typically the A-weighted noise levels of the product are:
Sound pressure level 87 dB(A) ; sound power level 94 dB(A).
Uncertainty K =1.5 dB.
Vibration total values a
determined according to EN 60335:
=5.5m/s2, K= 1.5 m/s2.
a
h
(triax vector sum) and uncertainty K
h
Declaration of Conformity
We declare under our sole responsibility that the product described under “Technical data” is in conformity with the following standards or standardization documents: EN 60335
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC, 2000/14/EC.
2000/14/EC: Guaranteed sound power level 96 dB (A). Conformity assessment procedure according to Annex V.
Bosch Lawn and Garden Ltd., PT-LG/ENS4,
Stowmarket, Suffolk IP14 1EY, England
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
05.09.2012
Mounting and Operation
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Do not connect the machine to the mains socket before
it is completely assembled.
The cutting line continues to rotate for a few seconds
after the trimmer is switched off. Allow the motor/cutting line to stop rotating before switching “on” again.
Do not rapidly switch off and on.
Do not hand bump the line feed as it could be hot.
Remove any grass from spool cover when changing line
or spool.
Only use Bosch approved cutting line. Cutting perfor-
mance will vary with different cutting line.
Use the original spring when replacing spool.
ActionFigure
Delivery Scope1
Connecting the Shaft2
Mounting the Auxiliary Handle3
Mounting the Cutting Guard4
Attaching the Shoulder Strap5
Connecting the Extension Lead6
Starting7
Stopping7
Working Advice8
Feeding the Line9
Replacing the Line Spool10
Winding Line on Spool11
Fitting Spool into Spool Holder12
Maintenance, Cleaning and Storage13 – 14
Selecting Accessories15
F 016 L70 955 | (12.10.12)Bosch Power Tools
Page 5
OBJ_DOKU-32608-001.fm Page 5 Friday, October 12, 2012 10:36 AM
Troubleshooting
ProblemPossible CauseCorrective Action
Trimmer fails to operatePower turned offTurn power on
Mains socket faultyUse another socket
Extension cable damagedInspect cable, replace if damaged
Fuse faulty/ blownReplace fuse
Trimmer runs intermittentlyExtension cable damagedInspect cable, replace if damaged
Contact Service Agent
Internal wiring of garden product damaged Contact Service Agent
Garden product laboursGrass too highCut in stages
Garden product does not cutCutting line to short/broken offReplace cutting line
Line can not be fedSpool emptyReplace the spool
Line inside the spool entangledInspect the spool, rewind if necessary
Line retracts into spoolLine not bump fedRewind spool (see figure 11)
Line keeps breakingLine inside the spool entangledInspect the spool, rewind if necessary
Trimmer used incorrectlyOnly trim with the tip of the line, avoid stones,
walls and other hard objects. Feed the line
regularly to maintain full cutting width.
English | 5
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: boschservicecentre@bosch.com
Bosch Power ToolsF 016 L70 955 | (12.10.12)
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Page 6
OBJ_DOKU-32608-001.fm Page 6 Friday, October 12, 2012 10:36 AM
6 | English
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Do not dispose of garden products into household waste!
Only for EC countries:
According to the European directive
2002/96/EC for Waste Electrical and Electronic Equipment and its implementation
into national law, electrical and electronic
equipment that are no longer usable must
be collected separately and dispose d of in
an environmentally correct manner.
Subject to change without notice.
F 016 L70 955 | (12.10.12)Bosch Power Tools
Page 7
OBJ_BUCH-1816-001.book Page 7 Thursday, October 11, 2012 4:38 PM
1
| 7
2
3
CLICK!
Bosch Power ToolsF 016 L70 955 | (11.10.12)
Page 8
OBJ_BUCH-1816-001.book Page 8 Thursday, October 11, 2012 4:38 PM
8 |
4
5
6
F 016 L70 955 | (11.10.12)Bosch Power Tools
Page 9
OBJ_BUCH-1816-001.book Page 9 Thursday, October 11, 2012 4:38 PM
7
8
| 9
360
>20 cm
Bosch Power ToolsF 016 L70 955 | (11.10.12)
Page 10
OBJ_BUCH-1816-001.book Page 10 Thursday, October 11, 2012 4:38 PM
10 |
9
360
10
F 016 L70 955 | (11.10.12)Bosch Power Tools
Page 11
OBJ_BUCH-1816-001.book Page 11 Thursday, October 11, 2012 4:38 PM
| 11
11
= 1.6 mm
8 m
4 m
Bosch Power ToolsF 016 L70 955 | (11.10.12)
Page 12
OBJ_BUCH-1816-001.book Page 12 Thursday, October 11, 2012 4:38 PM
12 |
12
15 cm
15 cm
13
F 016 L70 955 | (11.10.12)Bosch Power Tools
Page 13
OBJ_BUCH-1816-001.book Page 13 Thursday, October 11, 2012 4:38 PM
14
| 13
15
Bosch Power ToolsF 016 L70 955 | (11.10.12)
F 016 800 178
F 016 800 345
F 016 800 344
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.