Bosch ARD-FPBEPHP-OC, ARD-FPBEPMF-OC, ARD-FPBEPPR-OC Specsheet

Engineered Solutions | ARD-FPBEPxx-OC - BioEntry Plus with card reader / Americas

ARD-FPBEPxx-OC - BioEntry Plus with card
reader / Americas

www.boschsecurity.com

u Ethernet interface for TCP/IP communication

u Optional standalone user management

u Multi color LED

u Different authentication modes (fingerprint and/or

card)

u Proximity cards

This is a slim-design fingerprint reader for installation
on door frames. It is compatible with a full range of
access-control applications, from a simple standalone
door control to complex, networked access-control
systems.

Approvals

• Europe: CE

• Americas: FCC

Functions

Authentication can be granted by reading fingerprints,
cards or a combination of the two.

Access control functions:

• 128 access groups

• 128 time schedules

• Anti-passback door zones supporting 32 readers

• Tamper switch and duress finger option

Installation/Configuration Notes

Product compatibility:

The product is compatible with the following access
controllers:

• AEC 2.1

• AMC2-4W

• D9210C

Required software:

• BioStar Express Setup utility

• Reader firmware 1.51_120323 for compatibility with
the controllers listed

Secure configuration example:

Combined with an access controller (e.g. AMC2 4W) a
secure door control can be built as illustrated below.

2 | ARD-FPBEPxx-OC - BioEntry Plus with card reader / Americas

1 = Power supply; 2 = Door lock; 3 = Exit button;
4 = Door sensor; 5 = Wiegand secure communication;
6 = AMC2 4W; 7 = Access control system;
8 = PC with Bio Application via LAN

Technical Specifications

ARD-FPBEPHP-OC - with HID Prox card reader

IP based fingerprint access control for indoor
installation with fingerprint and/or card (HID Prox)
identification.

Order number ARD-FPBEPHP-OC

ARD-FPBEPMF-OC - with MIFARE card reader

IP based fingerprint access control for indoor
installation with fingerprint and/or card (MIFARE)
identification.

Order number ARD-FPBEPMF-OC

ARD-FPBEPIC-OC - BioEntry Plus with card reader / for
Americas

IP based fingerprint access control for indoor
installation with fingerprint and/or card (iCLASS)
identification.

Order number ARD-FPBEPIC-OC

CPU 400 MHz DSP

Memory 4 MB flash + 8 MB RAM

Fingerprint sensor 500 dpi optical sensor

Identification speed 2,000 matches in 1 second

Fingerprint capacity 10,000 templates (5,000 users)

Log capacity 50,000 events

RF card Proximity (125 kHz EM)

Operation modes Fingerprint

Network interface TCP/IP, RS485

Wiegand output Configurable up to 64 bits

TTL I/O 2 inputs for exit switch and door

Internal relay Deadbolt, EM lock, door strike,

Sound and interface Multi-color LED and multi-tone

Operating voltage 12 Vdc

RF card
RF card + fingerprint

sensor

automatic door

buzzer

Size (W x H x D) 50 x 160 x 37 mm

Ordering Information

ARD-FPBEPPR-OC – with EM card reader

IP based fingerprint access control for indoor
installation with fingerprint and/or card (EM Prox)
identification.

Order number ARD-FPBEPPR-OC