Bosch AEC-AMC2-ENC3 Installation Manual

AMC2 ENC3 Enclosure

AEC-AMC2-ENC3 | AEC-AMC2-ENC3Z

en Installation Manual

AMC2 ENC3 Enclosure Table of Contents | en 3

Table of Contents

1 Copyright Notice 4

2 Safety and Warranty 5

2.1 Important safety notes 5

2.2 FCC information 6

3 Short Information 7

4System Overview 8

4.1 Parts of the enclosure 8

4.2 Dimensions of the enclosure 9

5 Planning the Mounting Location 10

6 Mounting the Enclosure 11

7 Connecting the Devices 12

7.1 Connecting the devices in AEC-AMC2-ENC3 12

Robert Bosch (SEA) Pte Ltd Installation Manual F.01U.269.165 | V1.0.0 | 2012.05

4 en | Copyright Notice AMC2 ENC3 Enclosure

1 Copyright Notice

All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, without the prior written permission of BOSCH SECURITY SYSTEMS.

This manual is provided pursuant to a license agreement containing restrictions on their use.
The manual contains valuable trade secrets and proprietary information of BOSCH SECURITY
SYSTEMS and is protected by international copyright law. It may not be copied or distributed
to third parties, or used in any manner not provided for in the said license agreement.

All software is provided "AS IS." The sole obligation of BOSCH SECURITY SYSTEMS shall be to
make available all published modifications that correct program problems are published
within one (1) year from the date of shipment.

The software is intended for use only with the hardware specified in this manual and in the
absence of other software. Concurrent use with other software or with hardware not
specified may cause the program to function improperly or not at all. BOSCH SECURITY
SYSTEMS may not provide support for systems operating under such conditions.

All efforts have been made to ensure the accuracy of the contents of this manual. The above
notwithstanding, BOSCH SECURITY SYSTEMS assume no responsibility for any errors in this
manual or their consequences.

The information on this document is subject to change without notice.

Other product and company names mentioned herein may be the trademarks of their
respective owners.

F.01U.269.165 | V1.0.0 | 2012.05 Installation Manual Robert Bosch (SEA) Pte Ltd

AMC2 ENC3 Enclosure Safety and Warranty | en 5

2 Safety and Warranty

2.1 Important safety notes

1. Read, Follow, and Retain Instructions – All safety and operating instructions must be
read and followed properly before putting the unit into operation. Retain instructions for
future reference.

2. Consider all Warnings – Adhere to all warnings on the unit and in the operating
instructions.

3. Accessories – Use only accessories recommended by the manufacturer or those sold
with the product. Accessories not recommended by the manufacturer shall not be used,
as they may cause hazards.

4. Installation Precautions – Do not place this unit on an unstable stand, tripod, bracket, or
mount. The unit may fall, causing serious injury to persons and damage to the unit. Mount
the unit according to the manufacturer’s instructions.

5. Service – Do not attempt to service this unit by yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards. Refer all servicing to qualified
service personnel.

6. Damage Requiring Service – Disconnect the unit from the main AC or DC power source
and refer servicing to qualified service personnel under the following conditions:
– When the power supply cord or plug is damaged.
– If liquid has been spilled or an object has fallen into the unit.
– If the unit has been exposed to water and/or inclement weather (rain, snow, etc.).
– If the unit does not operate normally, when following the operating instructions.

Adjust only those controls specified in the operating instructions. Improper
adjustment of other controls may result in damage, and require extensive work by a

qualified technician to restore the unit to normal operation.
– If the unit has been dropped or the cabinet damaged.
– If the unit exhibits a distinct change in performance, this indicates that service is

needed.

7. Replacement Parts – When replacement parts are required, the service technician shall
use replacement parts that are specified by the manufacturer. Unauthorized
substitutions may result in fire, electrical shock or other hazards.

8. Safety Check – Upon completion of service or repair work on the unit, ask the service
technician to perform safety checks to ensure that the unit operates properly.

9. Power Sources – Operate the unit only from the type of power source indicated on the
label. If unsure of the type of power supply to use, contact your dealer.
– For units intended to operate from battery power, refer to the operating

instructions.

– For units intended to operate with External Power Supplies, use only the

recommended approved power supplies.

10. Lightning – For added protection during a lightning storm, or when this unit is left
unused for long periods of time, disconnect the unit from power. This will prevent
damage to the unit due to lightning and excessive power line surges.

11. Restricted Access Locations are required for the installation.

Robert Bosch (SEA) Pte Ltd Installation Manual F.01U.269.165 | V1.0.0 | 2012.05