Biostar P61S2 Owner's Manual

Hi-Fi P61S2 Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Dichiarazione di conformità
sintetica

Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002

Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive

2004/108/CE, 2006/95/CE e
1999/05/CE

quando ad esso applicabili

Short Declaration of conformity

We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives

2004/108/CE, 2006/95/CE and
1999/05/CE

whenever these laws may be applied

Table of Contents

Chapter 1: Introduction.......................................... 1

1.1 Before You Start.........................................................................................1

1.2 Package Checklist .....................................................................................1

1.3 Motherboard Features..............................................................................2

1.4 Rear Panel Connectors..............................................................................3

1.5 Motherboard Layout.................................................................................4

Chapter 2: Hardware Installation ........................... 5

2.1 Installing Central Processing Unit (CPU) ...............................................5

2.2 Install a Heatsink ......................................................................................7

2.3 Fan Headers ...............................................................................................8

2.4 Installing System Memory ........................................................................ 9

2.5 Connectors and Slots................................................................................10

Chapter 3: Headers & Jumpers Setup ................... 13

3.1 How to Setup Jumpers ............................................................................13

3.2 Detail Settings..........................................................................................13

Chapter 4: Useful Help ......................................... 17

4.1 Driver Installation ...................................................................................17

4.2 Software.................................................................................................... 18

4.3 BIOS Update............................................................................................. 20

4.4 AMI BIOS Beep Code ............................................................................... 25

4.5 Troubleshooting .......................................................................................26

Appendix: SPEC In Other Languages .................... 28

German .................................................................................................................28

French....................................................................................................................30

Italian....................................................................................................................32

Spanish ..................................................................................................................34

Portuguese............................................................................................................36

Polish .....................................................................................................................38

Russian ..................................................................................................................40

Arabic ....................................................................................................................42

Japanese................................................................................................................ 44

CHAPTER 1: INTRODUCTION

Hi-Fi P61S2

1.1 B

EFORE YOU START

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:

 Prepare a dry and stable working environment with sufficient

lighting.

 Always disconnect the computer from power outlet before

operation.

 Before you take the motherboard out from anti-static bag,

ground yourself properly by touching any safely grounded
appliance, or use grounded wrist strap to remove the static
charge.

 Avoid touching the components on motherboard or the rear

side of the board unless necessary. Hold the board on the
edge, do not try to bend or flex the board.

 Do not leave any unfastened small parts inside the case after

installation. Loose parts will cause short circuits which may
damage the equipment.

 Keep the computer from dangerous area, such as heat

source, humid air and water.

 The operating temperatures of the computer should be 0 to

45 degrees Celsius.

 To avoid injury, be careful of:

Sharp pins on headers and connectors
Rough edges and sharp corners on the chassis
Damage to wires that could cause a short circuit

1.2 PACKAGE CHECKLIST

; Serial ATA Cable x2
; Rear I/O Panel for ATX Case x1
; User’s Manual x1
; Fully Setup Driver DVD x1

Note: The package contents may be different due to the sales region or models in which it was
sold. For more information about the standard package in your region, please contact your
dealer or sales representative.

1

Motherboard Manual

1.3 MOTHERBOARD FEATURES

SPEC

Socket 1155

CPU

Chipset Intel H61

Super I/O

Main

Memory

SATA 2 Integrated Serial ATA Controller

LAN Realtek RTL8111F

Intel Core i7 / i5 / i3 / Pentium / Celeron

processor

IT8728F-BX

Provides the most commonly used legacy

Super I/O functionality

Low Pin Count Interface

DDR3 DIMM Slots x 2

Max Memory Capacity 16GB

Each DIMM supports 512MB/

1GB/2GB/4GB/8GB DDR3

Supports Execute Disable Bit / Enhanced Intel

SpeedStep® / Intel Architecture-64 / Extended

Memory 64 Technology / Virtualization Technology /

Hyper Threading

Environment Control initiatives

Hardware Monitor Controller

Fan Speed Controller

ITE's "Smart Guardian" function

Dual Channel Mode DDR3 memory module

Supports DDR3 1066 / 1333 /1600 (depending on

CPU)

Registered DIMM and ECC DIMM is not supported

Data transfer rates up to 3.0 Gb/s

SATA Version 2.0 specification compliant

10 / 100 Mb/s / 1Gb/s auto negotiation

Half / Full duplex capability

Sound

Codec

Slots

On Board

Connectors

2

ALC662

5.1 channels audio out

High Definition Audio, Biostar Hi-Fi

Supports PCI-E Gen2/3 x16 expansion card

PCI-E Gen3 x16 slot x1

(depending on CPU)

PCI-E Gen2 x1 slot x5 Supports PCI-E Gen2 x1 expansion card

SATA2 Connector x4 Each connector supports 1 SATA2 device

Front Panel Connector x1 Supports front panel facilities

Front Audio Connector x1 Supports front panel audio function

CPU Fan Header x1 CPU Fan power supply (with Smart Fan function)

System Fan Header x1 System Fan Power supply

Clear CMOS Header x1 Restore CMOS data to factory default

Hi-Fi P61S2

SPEC

USB2.0 Connector x2 Each connector supports 2 front panel USB2.0 ports

S/PDIF out Connector x1 Supports digital audio out function

Printer Port Connector x1 Each connector supports 1 Printer port

Power Connector (24pin) x1 Connects to Power supply

Power Connector (4pin) x1 Connects to Power supply

PS/2 Keyboard / Mouse x1

Serial Port x1

Rear Panel

LAN port x1

I/O

USB2.0 Port x4

Audio Jack x3

Board Size 210 (W) x 295 (L) mm

OS Support Windows XP / Vista / 7 / 8

Connects to PS/2 Keyboard / Mouse

Provide RS-232 Serial connection

Connect to RJ-45 Ethernet cable

Connect to USB2.0 devices

Provide Audio-In/Out and Mic. connection

Biostar reserves the right to add or remove support

for any OS with or without notice

1.4 REAR PANEL CONNECTORS

Note: Since the audio chip supports High Definition Audio Specification, the function of each audio

jack can be defined by software. The input / output function of each audio jack listed above
represents the default setting. However, when connecting external microphone to the audio
port, please use the Line In (Blue) and Mic In (Pink) audio jack.

3

Motherboard Manual

1.5 MOTHERBOARD LAYOUT

Note: ■ represents the 1st pin.

4

CHAPTER 2: HARDWARE INSTALLATION

Hi-Fi P61S2

2.1 I

NSTALLING CENTRAL PROCESSING UNIT (CPU)

Step 1: Locate the CPU socket on the motherboard

Note1: Remove Pin Cap before installation, and make good preservation for future use. When

the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be
damaged.
Note2: The motherboard might equip with two different types of pin cap. Please refer below
instruction to remove the pin cap.

Step 2: Pull the socket locking lever out from the socket and then raise the lever

up.

Step 3: Remove the Pin Cap.

5

Motherboard Manual

Step 4: Hold processor with your thumb and index fingers, oriented as shown.

Align the notches with the socket. Lower the processor straight down
without tilting or sliding the processor in the socket.

Note: The CPU fits only in one correct orientation. Do not force the CPU into the socket
to prevent damaging the CPU.

Step 5: Hold the CPU down firmly, and then lower the lever to locked position to

complete the installation.

6

Hi-Fi P61S2

2.2 INSTALL A HEATSINK

Step 1: Place the CPU fan assembly on top of the installed CPU and make sure

that the four fasteners match the motherboard holes. Orient the assembly
and make the fan cable is closest to the CPU fan connector.

Step 2: Press down two fasteners at one time in a diagonal sequence to secure

the CPU fan assembly in place. Ensure that all four fasteners are secured.

Note1: Do not forget to connect the CPU fan connector.
Note2: For proper installation, please kindly refer to the installation manual of your CPU
heatsink.

7

Motherboard Manual

2.3 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan cable and connector
may be different according to the fan manufacturer. Connect the fan cable to the connector
while matching the black wire to pin#1.

CPU_FAN1: CPU Fan Header

Pin Assignment

1 Ground
2 +12V
3

FAN RPM rate sense

4 Smart Fan Control

SYS_FAN1: System Fan Header

Pin Assignment

1 Ground
2 +12V
3 FAN RPM rate sense

Note: CPU_FAN1, SYS_FAN1 support 4-pin and 3-pin head connectors. When
connecting with wires onto connectors, please note that the red wire is the positive and
should be connected to pin#2, and the black wire is Ground and should be connected to
GND.

8

Hi-Fi P61S2

2.4 INSTALLING SYSTEM MEMORY

A. Memory Modules

Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM

on the slot such that the notch on the DIMM matches the break on the slot.

Step 2: Insert the DIMM vertically and firmly into the slot until the retaining chip snap

back in place and the DIMM is properly seated.

Note: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.

9

Motherboard Manual

B. Memory Capacity

DIMM Socket

Location

DDR3_A1 512MB/1GB/2GB/4GB/8GB

DDR3_B1 512MB/1GB/2GB/4GB/8GB

DDR3 Module

C. Dual Channel Memory Installation

Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.

Total Memory

Size

Max is 16GB.

Dual Channel Status

DDR3_A1

DDR3_B1

Disabled O X

Disabled X O

Enabled O O

(O means memory installed; X, not installed.)

Note: The DRAM bus width of the memory module must be the same (x8 or x16)

2.5 C

ONNECTORS AND SLOTS

SATA1~SATA4: Serial ATA2 Connectors

These connectors connect to SATA hard disk drives via SATA cables.

Those satisfy the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

Pin Assignment

1 Ground
2 TX+
3 TX­4 Ground
5 RX­6 RX+
7 Ground

10

Hi-Fi P61S2

ATXPWR2: ATX Power Source Connector

This connector provides +12V to CPU power circuit.

Pin Assignment

1 +12V
2 +12V
3 Ground
4 Ground

ATXPWR1: ATX Power Source Connector

This connector allows users to connect 24-pin power connector on the ATX
power supply.

Pin Assignment Pin Assignment

13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V

Note1: Before you power on the system, please make sure that both ATXPWR1 and
ATXPWR2 connectors have been plugged-in.

Note2: Insufficient power supplied to the system may result in instability or the
peripherals not functioning properly. Use of a PSU with a higher power output is
recommended when configuring a system with more power-consuming devices.

11

Motherboard Manual

PEX16_1: PCI-Express Gen3 x16 Slot

- PCI-Express 3.0 compliant.

- Maximum theoretical realized bandwidth of 16GB/s simultaneously per

direction, for an aggregate of 32GB/s totally.

- PCI-E 3.0 is supported by Core i7-3xxx / i5-3xxx CPU.

PEX1_1 ~ PEX1_5: PCI-Express Gen2 x1 Slots

- PCI-Express 2.0 compliant.

- Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.

- PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.

Install an Expansion Card

You can install your expansion card by following steps:

1. Read the related expansion card's instruction document before install the
expansion card into the computer.

2. Remove your computer's chassis cover, screws and slot bracket from the
computer.

3. Place a card in the expansion slot and press down on the card until it is
completely seated in the slot.

4. Secure the card’s metal bracket to the chassis back panel with a screw.

5. Replace your computer's chassis cover.

6. Power on the computer, if necessary, change BIOS settings for the

12

expansion card.
Install related driver for the expansion card.

7.

CHAPTER 3: HEADERS & JUMPERS SETUP

Hi-Fi P61S2

3.1 H

OW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SETTINGS

PANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows users to connect the PC case’s front panel switch
functions.

Pin Assignment Function Pin Assignment Function

1 +5V 9 N/A
2 N/A 10 N/A
3 N/A 11 N/A N/A
4 Speaker
5 HDD LED (+) 13 Power LED (+)
6 HDD LED (-)
7 Ground 15 Power button
8 Reset control

Speaker
Connector

Hard drive
LED

Reset button

12 Power LED (+)

14 Power LED (-)

16 Ground

N/A

Power LED

Power-on button

13

Motherboard Manual

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel

These headers allow users to connect additional USB cable on the PC front
panel, and also can be connected with internal USB devices, like USB card
reader.

JSPDIFOUT1: Digital Audio-out Connector

This connector allows users to connect the PCI bracket SPDIF output header.

Pin Assignment

1 +5V
2 SPDIF_OUT
3 Ground

Pin Assignment

1 +5V (fused)
2 +5V (fused)
3 USB­4 USB­5 USB+
6 USB+
7 Ground
8 Ground
9 Key

10 NC

14

Hi-Fi P61S2

F_AUDIO1: Front Panel Audio Header

This header allows users to connect the front audio output cable with the PC
front panel.

HD Audio AC’97

Pin Assignment Pin Assignment

1 Mic Left in 1 Mic In
2 Ground 2 Ground
3 Mic Right in 3 Mic Power
4 GPIO 4 Audio Power
5 Right line in 5 RT Line Out
6 Jack Sense 6 RT Line Out
7 Front Sense 7 Reserved
8 Key 8 Key
9 Left line in 9 LFT Line Out

10 Jack Sense 10 LFT Line Out

Note1: It is recommended that you connect a high-definition front panel audio module to
this connector to avail of the motherboard's high definition audio capability.
Note2: Please try to disable the "Front Panel Jack Detection" if you want to use an AC'97
front audio output cable. The function can be found via O.S. Audio Utility.

JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3 allows users to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.

3

1

Pin 1-2 Close:

Normal Operation (default).

Pin 2-3 Close:

Clear CMOS data.

3

1

※ Clear CMOS Procedures:

1. Remove AC power line.

2. Set the jumper to “Pin 2-3 close”.

3. Wait for five seconds.

4. Set the jumper to “Pin 1-2 close”.

5. Power on the AC.

6. Load Optimal Defaults and save settings in CMOS.

15

Motherboard Manual

J_PRINT1: Printer Port Connector

This header allows you to connector printer on the PC.

Pin Assignment Pin Assignment

1 -Strobe 14 Ground
2 -ALF 15 Data 6
3 Data 0 16 Ground
4 -Error 17 Data 7
5 Data 1 18 Ground
6 -Init 19 -ACK
7 Data 2 20 Ground
8 -Scltin 21 Busy

9 Data 3 22 Ground
10 Ground 23 PE
11 Data 4 24 Ground
12 Ground 25 SCLT
13 Data 5 26 Key

16

CHAPTER 4: USEFUL HELP

Hi-Fi P61S2

4.1 D

RIVER INSTALLATION

After you installed your operating system, please insert the Fully Setup Driver DVD into your
optical drive and install the driver for better system performance.

You will see the following window after you insert the DVD

The setup guide will auto detect your motherboard and operating system.

Note: If this window didn’t show up after you insert the Driver DVD, please use file
browser to locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will list the compatible
driver for your motherboard and operating system. Click on each device driver to launch the
installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide will list the
software available for your system, click on each software title to launch the installation
program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver DVD. Click on the
Manual icon to browse for available manual.

Note: You will need Acrobat Reader to open the manual file. Please download the latest
version of Acrobat Reader software from http://get.adobe.com/reader/

17

Motherboard Manual

4.2 SOFTWARE

Installing Software

1. Insert the Setup DVD to the optical drive. The driver installation program would appear if the
Autorun function has been enabled.

2. Select Software Installation, and then click on the respective software title.

3. Follow the on-screen instructions to complete the installation.

Note1: All the information and content about following software are subject to be changed
without notice. For better performance, the software is being continuously updated.

Note2: The information and pictures described below are for your reference only. The actual
information and settings on board may be slightly different from this manual.

Launching Software

After the installation process, you will see the software icon “eHOT Line” / “BIOS Update”
appears on the desktop. Double-click the icon to launch the utility.

eHot-Line (Optional)

eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This
utility will collect the system information which is useful for analyzing the problem you may have
encountered, and then send these information to our tech-support department to help you fix
the problem.

Note: Before you use this utility, please set Outlook Express as your default e-mail client application
program.

represent s important

*

in forma tion t hat y ou
must provide. Wi thout
this information, you may
not be able to send o ut
the mail.

This block will show
th e info rmat ion whic h
wou ld be c ol lect ed in
the mail.

Describe condition

*

of your system.

18

Send the mail out .

Sav e th ese in for mat ion t o a .t xt fi le

Exit this dialog .

Select your area or

*

the area close to you.

Pro vide t he e- mai l
address that you would
like to send the copy to.

Provi de th e name of

*

the memory module
manufact urer.

Pro vid e th e name o f
the power supply
manufacturer and the
model no.

Hi-Fi P61S2

After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.

Enter the file name and then click
“Save”. Your system information will
be saved to a .txt file.

Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.

Note1: We will not share customer’s data with any other third parties, so please feel free to
provide your system information while using eHot-Line service.

Note2: If you are not using Outlook Express as your default e-mail client application, you may
need to save the system information to a .txt file and send the file to our tech support with other
e-mail application. Go to the following web http://www.biostar.com.tw/app/en/about/contact.php for
getting our contact information.

19

Motherboard Manual

Smart EAR

Smart EAR is a windows-based audio utility which allows you to easily
adjust system volume. With its user-friendly GUI, you can also adjust
impedance setting (Low/High Gain) to optimize your headphone
performance.

z High/Low Gain Switch: Keep the gain switch to low for low impedance

headphone and set to high for high impedance headphone.

z Mute Button: To disable system sound

z Volume Control Knob: The volume can be finely adjusted by turning the

knob either clockwise or anti-clockwise to increase or decrease system
volume accordingly.

z Information Button: Get information of the application

z Minimize Button: Minimize the application window to the taskbar

z Exit Button: Exit the application

Note:

1. Smart EAR is only supported by Windows 7/8 and BIOSTAR Hi-Fi series motherboards.

2. High/Low Gain Switch is only for “Front Panel Audio Header”, please make sure you are
connecting your headphone to the front panel I/O.

20

Hi-Fi P61S2

4.3 BIOS UPDATE

There are three ways to update the BIOS: BIOS Update Utility, BIOS Online
Update Utility and BIOSTAR BIOS Flasher.

Note: The programming procedure may take minutes, please do not make any
operation during the programming process.

1. BIOS Update Utility

1. Installing BIOS Update Utility from the DVD Driver.

2. Download the proper BIOS from www.biostar.com.tw .

3. Open BIOS Update Utility and
click the Update BIOS button on
the main screen.

4. A warning message will show
up to request your agreement to
start the BIOS update. Click OK to
start the update procedure.

5. Choose the location for your
BIOS file in the system. Please
select the proper BIOS file, and
then click on Open. It will take
several minutes, please be
patient.

6. After the BIOS Update process is
finished, click on OK to reboot the
system.

21

Motherboard Manual

7. While the system boots up and the full screen logo shows up, please press

the

After entering the BIOS setup, please go to the Save & Exit, using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.

<Delete> key to enter BIOS setup.

Backup BIOS

Click the Backup BIOS button on the
main screen for the backup of BIOS,
and select a proper location for your
backup BIOS file in the system, and
click Save.

2. Online Update Utility

1. Installing BIOS Update Utility from the DVD Driver.

2. Please make sure the system is connected to the internet before using this
function.

3. Open BIOS Update Utility and

click the Online Update button
on the main screen.

4. An open dialog will show up to

request your agreement to
start the BIOS update. Click
Yes to start the online update
procedure.

22

5. If there is a new BIOS version,

the utility will ask you to
download it. Click Yes to
proceed.

6. After the download is

completed, you will be asked
to program (update) the BIOS
or not. Click Yes to proceed.

7. After the updating process is

finished, you will be asked you
to reboot the system. Click OK
to reboot.

Hi-Fi P61S2

8. While the system boots up and the full screen logo shows up, press
<Delete> key to enter BIOS setup.

After entering the BIOS setup, please go to the Save & Exit, using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.

23

Motherboard Manual

3. BIOSTAR BIOS Flasher

BIOSTAR BIOS Flasher is a BIOS flashing utility providing you an easy and
simple way to update your BIOS via USB pen drive.

Note1: This utility only allows storage device with FAT32/16 format and single partition.

Note2: Shutting down or resetting the system while updating the BIOS will lead to system

boot failure.

The BIOSTAR BIOS Flasher is built in the BIOS ROM. To enter the utility, press

<F12> during the Power-On Self Tests (POST) procedure while booting up.

Updating BIOS with BIOSTAR BIOS Flasher

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, copy and save the BIOS file into a USB flash (pen) drive.

3. Insert the USB pen drive that contains the BIOS file to the USB port.

4. Power on or reset the computer and then press <F12> during the POST process.

5. After entering the POST
screen, the BIOS-FLASHER
utility pops out. Choose [fs0] to
search for the BIOS file.

6. Select the proper BIOS file,
and a message asking if you
are sure to flash the BIOS file.
Click Yes to start updating
BIOS.

24

7. A dialog pops out after BIOS
flash is completed, asking you
to restart the system. Press the
[Y] key to restart system.

Hi-Fi P61S2

8. While the system boots up and the full screen logo shows up, press
<Delete> key to enter BIOS setup.

After entering the BIOS setup, please go to the Save & Exit, using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.

4.4 AMI

Boot Block Beep Codes

Number of Beeps Description

Continuing Memory sizing error or Memory module not found

POST BIOS Beep Codes

Number of Beeps Description

BIOS BEEP CODE

1 Success booting.
8 Display memory error (system video adapter)

25

Motherboard Manual

4.5 TROUBLESHOOTING

Probable Solution

1. There is no power in the system.
Power LED does not shine; the fan
of the power supply does not work

2. Indicator light on keyboard does not
shine.

System is inoperative. Keyboard lights
are on, power indicator lights are lit, and
hard drives are running.

System does not boot from a hard disk
drive, but can be booted from optical
drive.

System only boots from an optical drive.
Hard disks can be read, applications can
be used, but system fails to boot from a
hard disk.

Screen message shows “Invalid
Configuration” or “CMOS Failure.”

System cannot boot after the user installs
a second hard drive.

1. Make sure power cable is
securely plugged in.

2. Replace cable.

3. Contact technical support.

Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.

1. Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.

2. Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.

1. Back up data and applications
files.

2. Reformat the hard drive.
Re-install applications and data
using backup disks.

Review system’s equipment. Make sure
correct information is in setup.

1. Set master/slave jumpers
correctly.

2. Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

26

Hi-Fi P61S2

CPU Overheated

If the system shutdown automatically after power on system for seconds, that
means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown automatically to
avoid a damage of the CPU, and the system may not power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection
function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.

(See “Close CMOS Header: JCMOS1” section)

2. Wait for seconds.

Power on the system again.

3.

27

Motherboard Manual

APPENDIX: SPEC IN OTHER LANGUAGES

ERMAN

G

Spezifikationen

Socket 1155

CPU

Chipsatz Intel H61

Intel Core i7 / i5 / i3 / Pentium / Celeron

Prozessoren

Unterstützt Execute Disable Bit / Enhanced Intel

SpeedStep® / Intel Architecture-64 / Extended

Memory 64 Technology / Virtualization Technology /

Hyper Threading

IT8728F-BX

Super E/A

Arbeitsspeich

er

SATA 2 Integrierter Serial ATA-Controller

LAN Realtek RTL8111F

HD

Audio-Unters

tützung

Steckplätze

Bietet die häufig verwendeten alten Super

E/A-Funktionen.

Low Pin Count-Schnittstelle

DDR3 DIMM-Steckplätze x 2

Max. 16GB Arbeitsspeicher

Jeder DIMM unterstützt 512MB/

1GB/2GB/4GB/8GB DDR3.

ALC662

PCI-E Gen3 x 16 @ x16 Steckplatz x1 (je nach CPU)

PCI-E Gen2 x1-Steckplatz x5

Umgebungskontrolle,

Hardware-Überwachung

Lüfterdrehzahl-Controller/-Überwachung

"Smart Guardian"-Funktion von ITE

Dual-Kanal DDR3 Speichermodul

Unterstützt DDR3 1066 / 1333 /1600 (depending on

CPU)

registrierte DIMMs. ECC DIMMs werden nicht

unterstützt.

Datentransferrate bis zu 3.0Gb/s

Konform mit der SATA-Spezifikation Version 2.0

10 / 100 / 1000 Mb/s Auto-Negotiation

Halb-/ Vollduplex-Funktion

Unterstützt High-Definition Audio

5.1-Kanal-Audioausgabe, Biostar Hi-Fi

Onboard-Ans

chluss

SATA2-Anschluss x4 Jeder Anschluss unterstützt 1 SATA2-Laufwerk

Fronttafelanschluss x1 Unterstützt die Fronttafelfunktionen

Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion

28

Hi-Fi P61S2

Spezifikationen

CPU-Lüfter-Sockel x1

System-Lüfter-Sockel x1 System-Lüfter-Stromversorgungsanschluss

"CMOS löschen"-Sockel x1

USB2.0-Anschluss x2 Jeder Anschluss unterstützt 2

Verbraucher-IR Anschluss x1

S/PDIF Ausgangsanschluss x1 Unterstützt die digitale Audioausgabefunktion

Druckeranschluss Anschluss x1 Jeder Anschluss unterstützt 1 Druckeranschluss

Stromanschluss (24-polig) x1

Stromanschluss (4-polig) x1

CPU-Lüfterstromversorgungsanschluss (mit Smart

Fan-Funktion)

Fronttafel-USB2.0-Anschlüsse

PS/2-Tastatur / Maus x1

Serieller Anschluss x1

Rückseiten-E

LAN-Anschluss x1

/A

USB2.0-Anschluss x4

Audioanschluss x3

Platinengröße 210 mm (B) X 295 mm (L)

OS-Unterstüt

Windows XP / Vista / 7 / 8

zung

Biostar behält sich das Recht vor, ohne Ankündigung

die Unterstützung für ein Betriebssystem

hinzuzufügen oder zu entfernen.

29

Motherboard Manual

FRENCH

SPEC

Socket 1155

UC

Chipset Intel H61

Super E/S

Mémoire

principale

SATA 2

LAN Realtek RTL8111F

Processeurs Intel Core i7 / i5 / i3 / Pentium /

Celeron

IT8728F-BX

Fournit la fonctionnalité de Super E/S

patrimoniales la plus utilisée.

Interface à faible compte de broches

Fentes DDR3 DI M M x 2

Capacité mémoire maximale de 16 Go

Chaque DIMM prend en charge des DDR3 de

512Mo/1Go/2Go/4Go/8Go

Contrôleur Serial ATA intégré

Prend en charge les technologies d'exécution de bit

de désactivation / Intel SpeedStep® optimisée/

d'architecture Intel 64 / de mémoire étendue 64 / de

virtualisation / Hyper Threading

Initiatives de contrôle environnementales,

Moniteur de matériel

Contrôleur /moniteur de vitesse de ventilateur

Fonction "Gardien intelligent" de l'ITE

Module de mémoire DDR3 à mode à double voie

Prend en charge la DDR3 1066 / 1333 /1600

(depending on CPU)

Les DIMM à registres et DIMM avec code correcteurs

d'erreurs ne sont pas prises en charge

Taux de transfert jusqu'à 3.0Go/s.

Conforme à la spécification SATA Version 2.0

10 / 100 / 1000 Mb/s négociation automatique

Half / Full duplex capability

Prise en

charge

audio HD

Fentes

Connecteur

embarqué

30

ALC662

Prise en charge de l'audio haute définition

Sortie audio à 5.1 voies, Biostar Hi-Fi

Fente PCI-E Gen3 x 16 @ x16 x1 (en fonction du CPU)

Fente PCI-E Gen2 x1 x5

Chaque connecteur prend en charge 1 périphérique

Connecteur SATA2 x4

SATA2

Connecteur du panneau avant x1 Prend en charge les équipements du panneau avant

Connecteur Audio du panneau avant x1 Prend en charge la fonction audio du panneau avant

SPEC

Hi-Fi P61S2

E/S du

panneau

arrière

Embase de ventilateur UC x1

Embase de ventilateur système x1 Alimentation électrique du ventilateur système

Embase d'effacement CMOS x1

Connecteur USB2.0 x2

Connecteur de IR du consommateur x1

Connecteur de sortie S/PDIF x1

Connecteur de Port d'imprimante x1

Connecteur d'alimentation x1

(24 broches)

Connecteur d'alimentation x1

(4 broches)

Clavier / Souris PS/2 x1

Port série x1

Port LAN x1

Port USB2.0 x4

Fiche audio x3

Alimentation électrique du ventilateur UC (avec

fonction de ventilateur intelligent)

Chaque connecteur prend en charge 2 ports USB2.0

de panneau avant

Prend en charge la fonction de sortie audio

numérique

Chaque connector prend en charge 1 Port

d'imprimante

Dimensions

210 mm (l) X 295 mm (H)

de la carte

Support SE Windows XP / Vista / 7 / 8

Biostar se réserve le droit d'ajouter ou de supprimer

le support de SE avec ou sans préavis

31

Motherboard Manual

ITALIAN

SPECIFICA

CPU

Chipset

Super I/O

Memoria
principale

SATA 2

Socket 1155

Processore Intel Core i7 / i5 / i3 /

Pentium / Celeron

Intel H61

IT8728F-BX

Fornisce le funzionalità legacy Super I/O

usate più comunemente.

Interfaccia LPC (Low Pin Count)

Alloggi DIMM DDR3 x 2

Capacità massima della memoria 16GB

Ciascun DIMM supporta DDR3

512MB/1GB/2GB/4GB/8GB

Controller Serial ATA integrato

Supporto di Execute Disable Bit / Enhanced

Intel SpeedStep® / Architettura Intel 64 /

Tecno l o g i a Exte n d e d M emor y 6 4 / Te c nolo g i a

Virtualization / Hyper Threading

Funzioni di controllo dell’ambiente:

Monitoraggio hardware

Controller / Monitoraggio velocità ventolina

Funzione "Smart Guardian" di ITE

Modulo di memoria DDR3 a canale doppio

Supporto di DDR3 1066 / 1333 /1600

(depending on CPU)

DIMM registrati e DIMM ECC non sono

supportati

Velocità di trasferimento dei dati fino a

3.0Gb/s.

Compatibile specifiche SATA Versione 2.0

LAN

Supporto
audio HD

Alloggi

Connettori
su scheda

32

Realtek RTL8111F

ALC662

Alloggio PCI-E Gen3 x16 @ x16 x1

Alloggio PCI-E Gen2 x1 x5

Connettore SATA2 x4 Ciascun connettore supporta 1 unità SATA2

Connettore pannello frontale x1 Supporta i servizi del pannello frontale

Connettore audio frontale x1 Supporta la funzione audio pannello frontale

Collettore ventolina CPU x1

Negoziazione automatica 10 / 100 / 1000 Mb/s

Capacità Half / Full Duplex

Supporto audio High-Definition (HD)

Uscita audio 5.1 canali, Biostar Hi-Fi

(a seconda del CPU)

Alimentazione ventolina CPU (con funzione

Smart Fan)

Hi-Fi P61S2

SPECIFICA

Collettore ventolina sistema x1 Alimentazione ventolina di sistema

Collettore cancellazione CMOS x1

I/O
pannello
posteriore

Dimension
i scheda

Sistemi
operativi
supportati

Connettore USB2.0 x2

Connettore IR del consumatore x1

Connettore output S/PDIF x1 Supporta la funzione d’output audio digitale

Connettore Porta stampante x1

Connettore alimentazione x1

(24 pin)

Connettore alimentazione x1

(4 pin)

Tastiera / Mouse PS/2 x1

Porta Seriale x1

Porta LAN x1

Porta USB2.0 x4

Connettore audio x3

210 mm (larghezza) x 295 mm (altezza)

Windows XP / Vista / 7

/ 8

Ciascun connettore supporta 2 porte USB2.0

pannello frontale

Ciascun connettore supporta 1 Porta

stampante

Biostar si riserva il diritto di aggiungere o

rimuovere il supporto di qualsiasi sistema

operativo senza preavviso.

33

Motherboard Manual

SPANISH

Especificación

Socket 1155

CPU

Conjunto de

chips

Súper E/S

Memoria

principal

SATA 2 Controlador ATA Serie Integrado

Procesador Intel Core i7 / i5 / i3 / Pentium /

Celeron

Intel H61

IT8728F-BX

Le ofrece las funcionalidades heredadas de

uso más común Súper E/S.

Interfaz de cuenta Low Pin

Ranuras DIMM DDR3 x 2

Capacidad máxima de memoria de 16GB

Cada DIMM admite DDR de

512MB/1GB/2GB/4GB/8GB

Admite Bit de deshabilitación de ejecución / Intel

SpeedStep® Mejorado / Intel Architecture-64 /

Tecnología Extended Memory 64 / Tecnología de

virtualización / Hyper Threading

Iniciativas de control de entorno,

Monitor hardware

Controlador/monitor de velocidad de ventilador

Función "Guardia inteligente" de ITE

Módulo de memoria DDR3 de canal Doble

Admite DDR3 de 1066 / 1333 /1600 (depending on

CPU)

No admite DIMM registrados o DIMM compatibles

con ECC

Tasas de transferencia de hasta 3.0 Gb/s.

Compatible con la versión SATA 2.0

Red Local Realtek RTL8111F

Soporte de

sonido HD

Ranuras

Conectores

en placa

ALC662

Ranura PCI-E Gen3 x16 @ x16 X1 (dependiendo de la CPU)

Ranura PCI-E Gen2 x 1 X5

Conector SATA2 X4 Cada conector soporta 1 dispositivos SATA2

Conector de panel frontal X1 Soporta instalaciones en el panel frontal

Conector de sonido frontal X1 Soporta funciones de sonido en el panel frontal

Cabecera de ventilador de CPU X1 Fuente de alimentación de ventilador de CPU (con

34

Negociación de 10 / 100 / 1000 Mb/s

Funciones Half / Full dúplex

Soporte de sonido de Alta Definición

Salida de sonido de 5.1 canales, Biostar Hi-Fi

función Smart Fan)

Hi-Fi P61S2

Especificación

Cabecera de ventilador de sistema X1 Fuente de alimentación de ventilador de sistema

Cabecera de borrado de CMOS X1

Conector USB2.0 X2 Cada conector soporta 2 puertos USB2.0 frontales

Conector de IR del consumidor X1

Conector de salida S/PDIF X1 Soporta función de salida de sonido digital

Conector Puerto de impresora X1 Cada conector soporta 1 Puerto de impresora

Panel

trasero de

E/S

Tam a ñ o de

la placa

Soporte de

sistema

operativo

Conector de alimentación X1

(24 patillas)

Conector de alimentación X1

(4 patillas)

Tecl a d o / Rató n P S /2 X 1

Puerto serie X1

Puerto de red local X1

Puerto USB2.0 X4

Conector de sonido X3

210 mm. (A) X 295 Mm. (H)

Windows XP / Vista / 7 / 8

Biostar se reserva el derecho de añadir o retirar el

soporte de cualquier SO con o sin aviso previo.

35

Motherboard Manual

PORTUGUESE

ESPECIFICAÇÕES

Socket 1155

CPU

Chipset Intel H61

Especificaçã

o Super I/O

Memória

principal

SATA 2 Controlador Serial ATA integrado

Processador Intel Core i7 / i5 / i3 / Pentium /

Celeron

IT8728F-BX

Proporciona as funcionalidades mais

utilizadas em termos da especificação Super

I/O.

Interface LPC (Low Pin Count).

Ranhuras DIMM DDR3 x 2

Capacidade máxima de memória: 16 GB

Cada módulo DIMM suporta uma memória

DDR3 de 512MB/ 1GB/2GB/4GB/8GB

Suporta as tecnologias Execute Disable Bit /

Enhanced Intel SpeedStep® / Intel Arquitecture -64

/ Extended Memory 64 / Virtualization / Hyper

Threading

Iniciativas para controlo do ambiente

Monitorização do hardware

Controlador/Monitor da velocidade da ventoinha

Função "Smart Guardian" da ITE

Módulo de memória DDR3 de canal duplo

Suporta módulos DDR3 1066 / 1333 /1600

(depending on CPU)

Os módulos DIMM registados e os DIMM ECC não

são suportados

Velocidades de transmissão de dados até 3.0 Gb/s.

Compatibilidade com a especificação SATA versão

2.0

LAN Realtek RTL8111F

Suporte

para áudio

de alta

definição

Ranhuras

Conectores

ALC662

Ranhura PCI-E Gen3 x16 @ x16 x1 (dependendo da CPU)

Ranhura PCI-E Gen2 x 1 x5

Conector SATA2 x4 Cada conector suporta 1 dispositivo SATA2

Conector do painel frontal x1 Para suporte de várias funções no painel frontal

36

Auto negociação de 10 / 100 / 1000 Mb/s

Capacidade semi/full-duplex

Suporta a especificação High-Definition Audio

Saída de áudio de 5.1 canais, Biostar Hi-Fi

ESPECIFICAÇÕES

Hi-Fi P61S2

na placa

Entradas/S

aídas no

painel

traseiro

Conector de áudio frontal x1 Suporta a função de áudio no painel frontal

Conector da ventoinha da CPU x1

Conector da ventoinha do sistema x1 Alimentação da ventoinha do sistema

Conector para limpeza do CMOS x1

Conector USB2.0 x2

Conector de IR do consumidor x1

Conector de saída S/PDIF x1 Suporta a saída de áudio digital

Conector da para impressora x1 Cada conector suporta 1 Porta para impressora

Conector de alimentação x1

(24 pinos)

Conector de alimentação x1

(4 pinos)

Teclado / Rato PS/2 x1

Porta Série x1

Porta LAN x1

Porta USB2.0 x4

Tomada de áudio x3

Alimentação da ventoinha da CPU (com a função

Smart Fan)

Cada conector suporta 2 portas USB2.0 no painel

frontal

Ta ma n ho

da placa

Sistemas

operativos

suportados

210 mm (L) X 295 mm (A)

Windows XP / Vista / 7 / 8

A Biostar reserva-se o direito de adicionar ou

remover suporte para qualquer sistema operativo

com ou sem aviso prévio.

37

Motherboard Manual

POLISH

SPEC

Socket 1155

Procesor

Chipset Intel H61

Pamięć

główna

Super I/O

SATA 2 Zintegrowany kontroler Serial ATA

LAN Realtek RTL8111F

Procesor Intel Core i7 / i5 / i3 / Pentium /

Celeron

Gniazda DDR3 DIMM x 2

Maks. wielkość pamięci 16GB

Każde gniazdo DIMM obsługuje moduły

512MB/1GB/2GB/4GB/8GB DDR3

IT8728F-BX

Zapewnia najbardziej powszechne funkcje

Super I/O.

Interfejs Low Pin Count

Obsługa Execute Disable Bit / Enhanced Intel

SpeedStep® / Intel Architecture-64 / Extended

Memory 64 Technology / Virtualization Technology /

Hyper Threading

Moduł pamięci DDR3 z trybem podwójnego kanału

Obsługa DDR3 1066 / 1333 /1600 (depending on

CPU)

Brak obsługi Registered DIMM oraz ECC DIMM

Funkcje kontroli warunków pracy,

Monitor H/W

Kontroler/Monitor prędkości wentylatora

Funkcja ITE "Smart Guardian"

Transfer danych do 3.0 Gb/s.

Zgodność ze specyfikacją SATA w wersji 2.0

10 / 100 / 1000 Mb/s z automatyczną negocjacją

szybkości

Obsługa

audio HD

Gniazda

Złącza

wbudowane

38

Działanie w trybie połowicznego / pełnego dupleksu

ALC662

Gniazdo PCI-E Gen3 x16 @ x16 x1 (w zależności od procesora)

Gniazdo PCI-E Gen2 x 1 x5

Złącze SATA2 x4 Każde złącze obsługuje 1 urządzenie SATA2

Złącze panela przedniego x1 Obsługa elementów panela przedniego

Przednie złącze audio x1 Obsługa funkcji audio na panelu przednim

Złącze główkowe wentylatora

procesora x1

Obsługa High-Definition Audio

5.1 kanałowe wyjście audio, Biostar Hi-Fi

Zasilanie wentylatora procesora (z funkcją Smart

Fan)

SPEC

Hi-Fi P61S2

Back Panel

I/O

Wymiary

płyty

Złącze główkowe wentylatora

systemowego x1

Złącze główkowe kasowania CMOS x1

Złącze USB2.0 x2

Złącze Konsument IR x1

Złącze wyjścia S/PDIF x1 Obsługa funkcji cyfrowego wyjścia audio

Złącze Port drukarki x1 Każde złącze obsługuje 1 Port drukarki

Złącze zasilania (24 pinowe) x1

Złącze zasilania (4 pinowe) x1

Klawiatura / Mysz PS/2 x1

Port Szeregowy x1

Port LAN x1

Port USB2.0 x4

Gniazdo audio x3

210 mm (S) X 295 mm (W)

Zasilanie wentylatora systemowego

Każde złącze obsługuje 2 porty USB2.0 na panelu

przednim

Obsluga

systemu

operacyjne

go

Windows XP / Vista / 7 / 8

Biostar zastrzega sobie prawo dodawania lub

odwoływania obsługi dowolnego systemu

operacyjnego bez powiadomienia.

39

Motherboard Manual

RUSSIAN

CPU
(центральн

ый
процессор)

Набор
микросхем

Основная
память

Super I/O

SATA 2

Локальная
сеть

Звуковая
поддержка
жесткого
диска

Слоты

Встроенны
й разъём

Socket 1155
Процессор Intel Core i7 / i5 / i3 / Pentium /

Celeron

Intel H61

Слоты DDR3 DIMM x 2
Максимальная ёмкость памяти 16 ГБ
Каждый модуль DIMM поддерживает

512МБ/1ГБ/2ГБ/4ГБ/8ГБ DDR3

IT8728F-BX

Обеспечивает наиболее используемые
действующие функциональные
возможности Super I/O.
Интерфейс с низким количеством выводов

Встроенное последовательное устройство
управления ATA

Realtek RTL8111F

ALC662

Слот PCI-E Gen3 x16 @ x16 x1 (в зависимости от процессора)
Слот PCI-E Gen2 x 1 x5

Разъём SATA2 x4

Разъём на лицевой панели x1 Поддержка устройств на лицевой панели

Входной звуковой разъём x1

Контактирующее приспособление
вентилятора центрального процессора x1

Контактирующее приспособление
вентилятора системы x1

СПЕЦ

Поддержка технологий Execute Disable Bit /

Enhanced Intel SpeedStep® / Intel Architecture-64
/ Extended Memory 64 Technology / технологии

виртуализация / Hyper Threading

Модуль памяти с двухканальным режимом DDR3
Поддержка DDR3 1066 / 1333 /1600 (depending

on CPU)
Не поддерживает зарегистрированные модули

DIMM and ECC DIMM

Инициативы по охране окружающей среды,
Аппаратный монитор
Регулятор скорости вентилятора/ монитор
Функция ITE "Smart Guardian"
(Интеллектуальная защита)

скорость передачи данных до 3.0 гигабит/с.
Соответствие спецификации SATA версия 2.0

Автоматическое согласование 10 / 100 / 1000
Мб/с
Частичная / полная дуплексная способность

Звуковая поддержка High-Definition

5.1канальный звуковой выход, Biostar Hi-Fi

Каждый разъём поддерживает 1 устройство

SATA2

Поддержка звуковых функций на лицевой
панели

Источник питания для вентилятора центрального
процессора (с функцией интеллектуального
вентилятора)

Источник питания для вентилятора системы

40

Задняя
панель
средств
ввода-выв
ода

Размер
панели

Поддержка

OS

Hi-Fi P61S2

СПЕЦ

Открытое контактирующее
приспособление CMOS x1

USB2.0-разъём x2

Разъём едока ИКЫЙ x1

Разъём вывода для S/PDIF x1 Поддержка вывода цифровой звуковой функции

Разъём Порт подключения
принтера x1

Разъем питания (24 вывод) x1

Разъем питания (4 вывод) x1

Клавиатура / Мышь PS/2 x1
Последовательный порт x1
Порт LAN x1
USB2.0-порт x4
Гнездо для подключения
наушников x3

210 мм (Ш) X 295 мм (В)

Windows XP / Vista / 7 / 8

Каждый разъём поддерживает 2 USB2.0-порта на
лицевой панели

Каждый разъём поддерживает 1 Порт
подключения принтера

Biostar сохраняет за собой право добавлять или
удалять средства обеспечения для OS с или без
предварительного уведомления.

41

Motherboard Manual

ARABIC

تﺎﻔﺻاﻮﻤﻟا

تﺎﻴﻨﻘﺗ ﻢﻋﺪﺗExecute Disable Bit / Enhanced Intel

SpeedStep® / Intel Architecture-64 / Extended

Memory 64 Technology / Virtualization Technology

/ Hyper Threading

Intel H61 ﺔﻋﻮﻤﺠﻣ ﺢﺋاﺮﺸﻟا

ﺔﺤﺘﻓDDR3 DIMM دﺪﻋ2

ﺔﻌﺳ ةﺮآاذ ىﻮﺼﻗ 16 ﺎﺠﻴﺟ ﺖﻳﺎﺑ

/512 ﺎﺠﻴﻣ ﺖﻳﺎﺑ

ﻢﻋﺪﺗ ﻞآ ﺔﺤﺘﻓ DIMM ﻢﻋﺪﺗ ةﺮآاذ ﻦﻣ عﻮﻧ DDR3 ﺔﻌﺳ

ﻞﺋﺎﺳو ﻢﻜﺤﺘﻟا ﻲﻓ ﺔﺌﻴﺒﻟا:

ﺐﻗاﺮﻣ ﺔﻓﺮﻌﻤﻟ ﺔﻟﺎﺣ ةﺰﻬﺟﻷا

ﺐﻗاﺮﻣ ﻲﻓ ﺔﻋﺮﺳ ﺔﺣوﺮﻤﻟا

ﺔﻔﻴﻇو"Smart Guardian" ﻦﻣ ITE

ﺔﻘﺑﺎﻄﻣ تﺎﻔﺻاﻮﻤﻟ SATA راﺪﺻﻹا 2.0

ضوﺎﻔﺗ ﻲﺋﺎﻘﻠﺗ 10/100 ﺎﺠﻴﻣ ﺖﻳﺎﺑ /ﺔﻴﻧﺎﺛ و1ﺎﺠﻴﺟ ﺖﺑ/ﺔﻴﻧﺎﺛ

ﺔﻴﻧﺎﻜﻣإ ﻘﻨﻟاﻞ جودﺰﻤﻟا ﻞﻣﺎﻜﻟا/ﻲﻔﺼﻨﻟا

Socket 1155

تﺎﺠﻟﺎﻌﻣIntel Core i7 / i5 / i3 / Pentium /

Celeronﺑ ددﺮﺘ ﻳ ﻰﻟإ ﻞﺼ

ةﺪﺣو ةﺮآاذ DDR3 ﺔﺟودﺰﻣ ﻘﻟاةﺎﻨ

ﻢﻋﺪﺗ ةﺮآاﺬﻟا ﻦﻣ عﻮﻧ DDR3 تﺎﻌﺳ 1066 / 1333/ 1600

)depending on CPU( ﺎﺠﻴﻣ ﺖﻳﺎﺑ

و1/ و2/ و4/ و8 ﺎﺠﻴﺟ ﺖﻳﺎﺑ

IT8728F-BX

Low Pin Count Interface

ﻞﻘﻧ تﺎﻧﺎﻴﺒﻟا تﺎﻋﺮﺴﺑ ﻞﺼﺗ ﻰﻟإ 3.0 ﺖﺑﺎﺠﻴﺟ/ﺔﻴﻧﺎﺛ.

Realtek RTL8111F ﺔﻜﺒﺷ ﺔﻴﻠﺧاد

ﻻ ﻢﻋﺪﺗ ﻖﺋﺎﻗر ةﺮآاﺬﻟا DIMM ﻚﻠﺗو ﻲﺘﻟا ﻻ ﻖﻓاﻮﺘﺗ ﻊﻣ ECC

ﺮﻓﻮﺗ ﻴﻇوﺔﻔ Super I/O ﺮﺜآﻷا ًﺎ ﻣ ا ﺪ ﺨ ﺘ ﺳ ا.

ﺗﻢﻋﺪ ﺔﻴﻨﻘﺗ

ﻢﻜﺤﺘﻣ Serial ATA ﻞﻣﺎﻜﺘﻣ SATA 2

ةﺪﺣو ﺔﺠﻟﺎﻌﻤﻟا

ﺔﻳﺰآﺮﻤﻟا

ةﺮآاﺬﻟا ﺔﻴﺴﻴﺋﺮﻟا

Super I/O

42

ﻢﻋﺪﺗ ﺔﻴﻨﻘﺗ تﻮﺼﻟا ﻲﻟﺎﻋ ﻒﻳﺮﻌﺘﻟا ﻦﻣ

5.1 تاﻮﻨﻗ جﺮﺨﻟ تﻮﺼﻟا , Biostar Hi-Fi

(ادﺎﻤﺘﻋا ﻰﻠﻋ ةﺪﺣو ﺔﺠﻟﺎﻌﻤﻟا ﺔﻳﺰآﺮﻤﻟا) ﺔﺤﺘﻓPCI-E Gen3 x16 @ x16 دﺪﻋ1

ﺔﺤﺘﻓPCI-E Gen2 x 1 دﺪﻋ 5

ةﺰﻬﺟأ ﻦﻣ ﺪﺣاو ﺬﻔﻨﻣ ﻞآ ﻢﻋﺪﻳSATA2 ﺬﻔﻨﻣSATA2 دﺪﻋ4

ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟا تاﺰﻴﻬﺠﺗ ﻢﻋﺪﻳ ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻣ دﺪﻋ1

ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟﺎﺑ تﻮﺼﻟا ﺔﻔﻴﻇو ﻢﻋﺪﻳ ﻲﻣﺎﻣﻷا تﻮﺼﻟا ﺬﻔﻨﻣ دﺪﻋ1

ﺔﻔﻴﻇو ﻊﻣ ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻤﻟ ﺔﻗﺎﻄﻟا ﻞﻴﺻﻮﺘﻟSmart Fan ﺔﻠﺻوﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻣ دﺪﻋ1

مﺎﻈﻨﻟا ﺔﺣوﺮﻤﻟ ﺔﻗﺎﻄﻟا ﻞﻴﺻﻮﺘﻟ مﺎﻈﻨﻟا ﺔﺣوﺮﻣ ﺔﻠﺻو دﺪﻋ1

ALC662

ﻢﻋد تﻮﺼﻟا ﻲﻟﺎﻋ

ﻒﻳﺮﻌﺘﻟا

تﺎﺤﺘﻔﻟا

ﺬﻓﺎﻨﻤﻟا ﻰﻠﻋ ﺢﻄﺳ

ﺔﺣﻮﻠﻟا

ﺢﺴﻣ ﺔﻠﺻوCMOS دﺪﻋ1

ﻲﺘﺤﺘﻓ ﺬﻔﻨﻣ ﻞآ ﻢﻋﺪﻳUSB2.0ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟﺎﺑ ﺬﻔﻨﻣUSB2.0 دﺪﻋ2

ﺬﻔﻨﻣﺔﻜﻠﻬﺘﺴﻣ ﺖﺤﺗ ﺮﻤﺣﻷا دﺪﻋ1

ﻲﻤﻗﺮﻟا تﻮﺼﻟا جﺮﺧ ﺔﻔﻴﻇو ﻢﻋﺪﻳ جﺮﺧ ﺬﻔﻨﻣS/PDIF ﻋ دﺪ1

ﺔﻌﺑﺎﻃ ﺬﻔﻨﻣ دﺪﻋ1

ﺔﻗﺎﻄﻟا ﻞﻴﺻﻮﺗ ﺬﻔﻨﻣ)24سﻮﺑد( دﺪﻋ1

ﺔﻗﺎﻄﻟا ﻞﻴﺻﻮﺗ ﺬﻔﻨﻣ)4ﺲﻴﺑﺎﺑد( دﺪﻋ1

Hi-Fi P61S2

تﺎﻔﺻاﻮﻤﻟا

ﺢﻴﺗﺎﻔﻣ ﺔﺣﻮﻟ / سوﺎﻣPS/2 دﺪﻋ1

ﻲﻠﺴﻠﺴﺗ ﺬﻔﻨﻣ دﺪﻋ1

ﺬﻓﺎﻨﻣ ﻞﺧد/جﺮﺧ

ﺔﻴﻠﺤﻣ لﺎﺼﺗا ﺔﻜﺒﺷ ﺬﻔﻨﻣ دﺪﻋ1

ﺔﺣﻮﻠﻟا ﺔﻴﻔﻠﺨﻟا

ﺬﻓﺎﻨﻣ2.0USB دﺪﻋ4

تﻮﺻ ﺲﺒﻘﻣ دﺪﻋ3

210 ﻢﻣ)ضﺮﻋ (X 295 ﻢﻣ)عﺎﻔﺗرا( ﻢﺠﺣ ﺔﺣﻮﻠﻟا

ﻆﻔﺘﺤﺗ Biostar ﺎﻬﻘﺤﺑ ﻲﻓ ﺔﻓﺎﺿإ وأ ﺔﻟازإ ﻢﻋﺪﻟا يﻷ مﺎﻈﻧ ﻞﻴﻐﺸﺗ رﺎﻄﺧﺈﺑ وأ نوﺪﺑ

رﺎﻄﺧإ.

Windows XP / Vista / 7 / 8 ﻢﻋد ﺔﻤﻈﻧأ ﻞﻴﻐﺸﺘﻟا

43

Motherboard Manual

JAPANESE

仕様

Socket 1155

CPU

チップセット Intel H61

メインメモリ

Super I/O

SATA 2 統合シリアルATAコントローラ

LAN Realtek RTL8111F

Intel Core i7 / i5 / i3 / Pentium / Celeron プロ

セッサ

DDR3 DIMMスロット x 2

最大メモリ容量16GB

各DIMMは 512MB/1GB/2GB/4GB/8GB DDR3

をサポート

IT8728F-BX

もっとも一般に使用されるレガシーSuper I/O機

能を採用しています。

低ピンカウントインターフェイス

Execute Disable Bit / Enhanced Intel SpeedStep® /

Intel Architecture-64 / Extended Memory 64

Technology / Virtualization Technology / Hyper

Threadingをサポートします

デュアル チャンネルモードDDR3メモリモジュール

DDR3 1066 / 1333 /1600 (depending on CPU) をサ

ポート

登録済みDIMMとECC DIMMはサポートされません

環境コントロールイニシアチブ、

H/Wモニター

ファン速度コントローラ/ モニター

ITEの「スマートガーディアン」機能

最高3.0 Gb/秒のデータ転送速度

SATAバージョン2.0仕様に準拠

10 / 100 / 1000 Mb/秒のオートネゴシエーション

半/全二重機能

HDオーディ

オのサポート

スロット

オンボードコ

ネクタ

44

ALC662

PCI-E Gen3 x16 @ x16スロット x1 (CPUに依存）

PCI-E Gen2 x 1スロット x2

SATA2コネクタ x4 各コネクタは1つのSATA2デバイスをサポートします

フロントパネルコネクタ x1 フロントパネル機能をサポートします

フロントオーディオコネクタ x1 フロントパネルオーディオ機能をサポートします

CPUファンヘッダ x1 CPUファン電源装置(スマートファン機能を搭載)

システムファンヘッダ x1 システムファン電源装置

CMOSクリアヘッダ x1

ハイデフィニションオーディオのサポート

5.1 チャンネルオーディオアウト, Biostar Hi-Fi

仕様

Hi-Fi P61S2

USB2.0コネクタ x2

消費者IRコネクタ x1

S/PDIFアウトコネクタ x1 デジタルオーディオアウト機能をサポートします

プリンタポートコネクタ x1 各コネクタは1つのプリンタポートをサポートします

電源コネクタ(24ピン) x1

電源コネクタ(4ピン) x1

PS/2キーボード / マウス x1

シリアルポート x1

背面パネル

LANポート x1

I/O

USB2.0ポート x4

オーディオジャック x3

ボードサイズ 210 mm (幅) X 295 mm (高さ)

OSサポート Windows XP / Vista / 7 / 8

各コネクタは2つのフロントパネルUSB2.0ポートをサポ

ートします

Biostarは事前のサポートなしにOSサポートを追加または

削除する権利を留保します。

2013/07/30

45