Biostar P4TSV Ver. 7.x User Manual

P

i

4

T

S

V

S

S

V

V

P

P

4

T

4

T

FCC Infor mation and Copyright

This equipment has been tested and found to com ply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. T hese limits

are designed to provide reasonable protection against harmful
int erference in a residential ins t allation. This equipment g enerat es, uses

and can radiate radio frequency energy and, if not installed and used i n
ac cordan ce wit h the in stru ction s, ma y cau se harm fu l in terf eren ce t o radi o
communications. There is no guarantee th at interference will not occur in

a partic ular installation.

The vendor makes no repr esentations or warranties with respect to the
contents here of and specially disclaims any implied
merchantabi li ty or fitness fo r a ny purpose. F urther the vendor reserves

the right to revise this publication and to make changes to the contents
here of without obligation to notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without
first obtaining the vendor’s approval in writing.

The con tent of this user’s manual is subject to be changed without notice
and we will not be responsible for any mistakes found in this user’s
manual. All the brand and product names are trademarks of their

r es p e c t iv e co m pa ni e s.

warran ties of

C

C

C

o

o

t

n

e

t

n

t

n

e

t

n

t

n

e

t

n

o

LAYOUT OF P4TSV VERSION 1.X.......................................................1

LAYOUT OF P4TSV VERSION 7.0........................................................ 2

ENGLISH...................................................................................................3

P4TSV Features.........................................................................................3

Packag e contents.......................................................................................5

How to set up Jumper.................................................................................5

CPU Ins t alla tion......... ........................ ........................................................5

DDR DIMM Modu les: DD RA1, DDRB 1 (for v.7.0 only)......................................6

DDR DIMM Modu les: DD RA1-2, DDRB1-2......................................................7

Inst allin g DDR Module ........................................................................ ........7

Jumpers, Headers, Connectors & Slots.........................................................8

ESPAÑOL ................................................................................................15

Características del P4TSV.........................................................................15

Co nt enido del Paquete........... ........................ ........................ ..................17

Cómo instalar un Puente........................................................................... 17

Instalación del C PU..................................................................................17

Módulos DDR DIMM: DDRA1-2, DDRB1-2.................................................... 18

Instalación del Módulo DDR ......................................................................19

Puentes, C abezales, Con ectores y Ranuras................................................20

DEUT SCH................................................................................................26

Spezifikationen von P4TSV........................................................................ 26

Verpackungsinhalt...................................................................................28

Einstellung der Jumper.............................................................................28

Inst alla tion der CP U.... ........................ ........................ ........................ ......28

DDR DIMM Modu les: DD RA1-2, DDRB1-2....................................................29

Installation von DD R-Modul....................................................................... 30

Jumpers, Headers, Anschlüsse & Slots....................................................... 31

FRANÇAIS .............................................................................................. 37

Caractéristiques de P4TSV........................................................................37

Co nt enu de l'Emballage.......................................................... ..................38

WARPSPEEDER..................................................................................... 39

TROUBLE SHOOTIN G......................................................................... 49

SOLUCIÓN DE PROBLEMAS.............................................................50

PROBLEMLÖSUNG.............................................................................. 51

ii

Layout of P4TSV Version 1.x

Mouse

Keyboa rd

JKBMS1

USB

JUSB1

Parallel

1

1 3

COM1

JCOM1

3

JVGA1

1

LAN

USB

JRJ45USB1

Line In / Sur r ou nd

Speaker Out

Mic In/ Bass&Ce nter

JAU DIO

Layout of P4TSV Version 7.0

JKBMS1

PS/2
Mouse

PS/2
Keyboard

JUSB1

USB

JCOM1

JPRNT1

JVGA1

2

JR45USB1

LAN

USB

Line In

Speaker Out

Mic In

JAUDIO1

English

P4TSV Fe atur es

A. Har dware

CPU

Pr ov ide s S o cke t-478 .
Supports the Intel Pentiu m 4 proce ssor up to 3 .06GHz.
Supports Northwood and Presc ott (Soc k et 478 ) C PU, up to 3.2 GHz. (W illamette

not s upported)

F ront Side Bus at 400/533/800MHz.
Support s Intel Hyper-Threading Technology.

Chipset

North Bridge: Intel 865G.
South Bridge: Intel ICH 5.

Main Me m o ry

Supports one or two 64-bit wide DDR data channels with 1 or 2 DIMMs

per-c hannel. (Version 7.0 supports only 1 DIMM per-c hannel.)

Av ailable bandwidt h up t o 3.2GB/s (DDR400) for single-channel mode and 6.4GB/s

(DDR 400) in dual channel mode.

Supports 128-MB, 256-Mb, 512-Mb and 1-GB DDR t ec hnologies .
Supports only x8, x16 DDR devic es. ( Does not support registered DI MMs or

double s ided X 16 DI MMs)
Supports four bank devic es, D ual channel DDR266/333/400 MHz.
Supports up t o 4GB m em ory s ize wit hout ECC. (2GB for vers ion 7.0)

Super I/O

Chip: ITE IT 8712F.
Low Pin C ount Int erface.

Provides the most com monly used legac y Supe r I/O func tionalit y.
Env iro nm ent C ont rol i niti atives ,

- H/W Monitor

- Fan Speed Controller

- I TE's "Smart Guardian" f unction

Slots

Three 32-bit PCI bus master s lots.
One CNR slot. (Op ti onal) ( No CNR slo t for ver s ion 7.0)

One AGP 4X/8X slot.

On Board IDE

Supports four IDE di s k dri ves.
Prov ides PIO Mode 0~4, Bus Master, and U lt ra DMA 33/66/100 func t ion.

3

Serial ATA/150 c ontroller int egrated in ICH5.

- Can c onnect up to two Serial ATA (SATA) drives.

- Up t o 150MB/sec transfer speeds.

- C om pliant with SATA 1. 0 specification

LAN

Chip: RTL8 100B.
Supports 10 Mb/s and 100 Mb/ s auto-negot iat ion.

Hal f/Full du plex cap ability.
Supports ACPI power m anagement.

On Bo ard AC’97 Sound Cod ec

Chip: CMI9739A/( C M I9761A for version 7.0)
Compliant with AC ’97 s pec ificat ion.
AC 97 2. 2 interf ac e for CMI9739A/ AC97 2. 3 int erf ace f or C MI9761A.

Support s 6 c hannels.
Support s stereo m icrophone. (only f or C MI9761A.)
Adv anced power management and power sav ing capabilities . (only f or

CMI9761A.)

On Board Periphera ls

a. R e ar si de

1 s erial port .
1 parallel port. (SPP/EPP/ECP m ode)

1 VGA port.
Audio ports in v ert ical.

1 R J -45 LAN jack.
Support s PS/ 2 mous e and PS/ 2 keyboard.

4 USB2.0 por t s.

b. F ront Si d e

1 floppy port supports 2 F DDs with 360K, 720K, 1.2M, 1. 44M and 2.88Mby t es.
4 USB2.0 port s.

Dimensions

Mic ro ATX Form Fac t or: 24.4 X24.4cm (W X L)
Mic ro ATX Form Fac t or: 23.6 X22.7cm (W X L) (for version 7. 0)

B. BIOS & S oftware

BIOS

Award legal BI OS.
Support s APM1.2.

Support s AC PI.
S upports USB Func tion.

4

Software

Supports Warpspeeder™ , 9th Touch™, FLASHER™, StudioFun! ™ (opt ional).
Offers the highest performance for Windows 98 SE, Windows 2000, W indows Me,

Windows XP, SC O UNIX etc.

Package contents

HDD Cable X 2
FDD Cable X1
User’s Manual X1

Fully Setup Driver CD X1
St udioF un! Application CD X 1 (optional)
USB 2.0 Cable X1 (optional)

S/ PD IF Cable X 1 (optional)
Rear I/ O Panel for Mic ro ATX C as e X1 (opt ional)

Serial ATA C able X1 (opt ional)
Serial ATA Power Switc h C able X1 (opt ional)

Ho w to set up a Jum pe r?

The illustrat ion sho ws to how set up a jum per. W h en the Jumper c ap is plac ed on pins , the
jumper is “close”. IF no jumper cap is placed on the pins, the jumper is ”open”. The
illust rat ion shows a 3-pin jum per whose pin1and 2 are “close” when jumper c ap is placed
on thes e 2 pins .

Jumper open Jum per close Pin1-2 close

CPU Installation

Step1: Pull the lever sideway s away from the socket and then raise the lev er up to a

90 -degree angl e.

Step2: Look for the whit e dot /cut edge. The whit e dot/ cut edge should point wards the lever

piv ot. The C P U will f it only in the correct orient at ion .

5

Step3: Hold the CPU down fir mly, an d then cl ose the lever to complete the installation.
Step4: Put the CPU Fan on the C PU and buck le it. Connect the C PU fan power cable to

the JCFAN1. This completes the installation.

Ste p 1 Step2 Step3 Step4

CPU Fan Headers: JCFAN1

1

JCFAN1

Pin Assignment

1
2

3

Ground

+12V

FAN RPM Sense

S ystem Fan Headers: JSFAN1

Pin Assignment

1

JSFAN1

1
2

3

Ground

+12V

FAN RPM Sense

DDR DI MM Module s: DDRA1, DDRB1 ( for v. 7.0 only)

Supports up to 2 D DR DIMMs (one DIMM per channel), single-s ided and/ or

double-sides.

DRAM Acces s Time: 2.5V Unbuffered/ no regis tered (without ECC) DD R SDRAM

PC2100/ PC 2700/ PC 3200 Type required.

DRAM Ty pe: 128MB/ 256MB/ 512MB/ 1GB DI MM Module (184 pin)

6

T otal Memory Size with U nbu ffered/ R eg i s tered D I MMs

DI MM Socke t

Location

DDRA1 128MB/256MB/512MB/1GB*1
DDRB1 128MB/256MB/512MB/1GB *1

DDR Mod u l e To tal Memory

Size (MB)

Max is

2GB

***Only for referen ce***

DDR DI MM Module s: DDRA1- 2, DDRB1-2

Support s up to four DD R DI MMs(two DI MMs per channel), single-s ided and/ or

double-sides.

F or Dual Channel Operat ion, DI MMs must be populated in identical pairs. It

has to be t he com bination of DDR A1+DDR B1 (Blue DI MMs) or DDRA2+DDRB2
(white DIMMs). For more dual channel operation information please log on:

www.biostar.com.tw

DRAM Acces s Time: 2.5V Unbuffered/ no regis tered (without ECC) DD R SDRAM

DRAM Ty pe: 128MB/ 256MB/ 512MB/ 1GB DI MM Module (184 pin)

T otal Memory Size with U nbu ffered/ R eg i s tered D I MMs

DI MM Socke t

Location

DDRA1 128MB/256MB/512MB/1GB*1
DDRA2 128MB/256MB/512MB/1GB *1

DDRB1 128MB/256MB/512MB/1GB *1
DDRB2 128MB/256MB/512MB/1GB *1

)

PC2100/ PC 2700/ PC 3200 Type required.

DDR Mod u l e To tal Memory

Size (MB)

Max is

4GB

***O nly for referenc e***

Installing DDR Mod ule

1. Unloc k a DIMM slot by pressing the retaining clips
o ut wa rd. A lig n a DI M M on t he s lot i n t h e way th at

the notch of the DIMM mat ches t he break of the
slot.

2. Ins ert the D IMM vertically and f irm ly into the s lot
until the retaining chip snap back in place and the

DIMM i s properly seated.

7

Jump ers, H eade rs , Co nnectors & Slo ts

Floppy Disk Connector: FDD1

The mot herboard provides a standard f loppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the

prov ided f loppy drive ribbon cables .

Hard Disk Connectors: IDE1/ IDE2

The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO
Mode 0~5, Bus Mast er, and U ltra DMA 33/ 66/ 100 f unctionality. I t has two H DD

connectors ID E1 (primary) and IDE2 (secondary).
The ID E c onnectors can c onnect a master and a slav e driv e, so y ou can c onnect

up t o f our hard disk driv es. The first hard drive s hould alway s be c onnected to
IDE1.

Periphera l Component Int erconnect Slots: P CI1-3

This m ot herboard is equipped with 3 st andard PCI s lots. PCI stands for Peripheral
Component I nterconnec t, and it is a bus standard for expansion cards. This PCI
slot is des ignated as 32 bits.

Accelerate d Graphics Port Slot: AGP1

Your monitor will attach directly to that video card. This motherboard supports
video cards f or PC I s lots, but it is als o equipped with an Accelerated Graphics Port

(AGP). An AGP c ard will take advantage of AGP technology f or improv ed video
efficiency and perform ance, es pecially with 3D graphics.

Communication Network Riser Sl ot: CNR1 (not for version 7.0)

The CNR specification is an open I ndust ry St andard Architecture, and it def ines a
ha rdw ar e scalable r iser card interfa ce, which su pports modem only.

Serial ATA Co nnector: JSATA1/JSATA2

The mot herboard has a PCI to SATA C ontroller with 2 channels SATA int erf ace, it
satisfies the SATA 1. 0 spec and c an transf er data with 150MB/sec speed.

1234567

JSA TA1/ JSATA2

Pin Assignment Pin Assignment

1
4
5

7

Ground

TX­RX-

Ground

8

2
4
6

TX+

Ground

RX+

Power Conn ectors: JATXPWER1/ JATXPWR2

10

1

JATXPWR1

JATXPWR2

Clear CMOS Jumper: JCMOS1

1 3

20

11

JCMOS1 Assignment

Pin 1-2 C los e

PIN Assignment PIN Assignment

1
2
3

4
5

6
7
8

9

10

12

3

PIN Assignment PIN Assignment

+3.3V
+3.3V

Ground

+5 V

Ground

+5 V

Ground

PW_OK

+5V_St andby

+1 2V

1
2

+12V
+12V

11
12
13

14
15

16
17
18

19
20

3
4

Norm al Operation (def ault)

+3. 3V

-12V

Ground
PS_ON

Ground
Ground

Ground

-5V

+5V
+5V

Ground
Ground

1 3

Pin 2-3 C los e

Clear CMOS Data

※ Clear CMOS Procedures:

1. R emov e AC power line.

2. Set the jumper to “Pin 2-3 C lose”.

3. Wa it for fi ve seconds.

4. Set the jumper to “Pin 1-2 C lose”.

5. Power on t he AC .

6. R eset your des ired password or clear t he C MOS dat a.

9

D

Front Pane l Conne ctor: JPANEL1

PWR_LED

JPANEL1

SLP

(+ )

(- )(+ )

2

IRON/ OFF

24

123

(-)

(+ )

HLE

RST

8 Power LED (+)

12 Power LED (-)

16 Ground

24 IRRX

Pin Assignment Function Pin Assignment Function

1 +5V 2 Sleep C ont rol
3 NA 4 Ground
5 NA 6 NA NA
7 Speaker

9 HDD LED (+) 10 Power LED (+)
11 HDD LED (-)
13 Ground 14 Power Butt on
15 Reset Control

17 NA 18 KEY
19 NA 20 KEY

21 +5V 22 Ground
23 IRTX

SPK

Speaker

Connector

Hard Drive

LED

Reset

Button

IrDA

Connector

IR

Sleep

Button

POWER

LED

Power-on

Button

IrDA

Connector

5V / 5VSB Selection for KB: JKBV1 (optional, not for v.7.0)

JKBV1 Assignment Description

1 3

Pin 1-2 c los e

1 3

Pin 2-3 c los e

+5 V

+5V_St andby

5V for ke yboa rd and mouse

5 V standby for keyboard and mouse to

po w er on your system

No t e: In o rder to su pport th i s fun cti o n “Pow e r-o n sy ste m v i a ke yb oa rd and
mouse”, “JKBV1” jumper cap should be placed on pin 2-3.

10

Power Selection for USB: JUSBV1/ JUSBV2/JUSBV3_4:
optional (not for v.7.0)

JUSBV1/JUSBV2/

JUSBV3_4

1 3

Pin 1-2 c los e

1 3

Pin 2-3 c los e

Assignment Description

+5V_St andby

+5 V

JUSBV1: 5V for JUSB1 port
JU SBV2: 5V for JRJ45U SB1 port
JUSBV 3_4: 5V for JUSB2/3 por ts

JU SBV1: 5V standby to power on

JU SB1 port

JU SBV2: 5V standby to power on

JRJ45U SBV1 port

JU SBV3_4: 5V standby to power on

JU SB2/3 ports

Note: 1. In order to support this fu n ction “Power-on syste m vi a USB d evi ce”,
“JUSBV1/ JUSBV2/ JUSBV3” jumper cap should be placed on pin 2-3

respectivel y.

2. If you are under S3 mode, we recommend you to select +5V
S tandby Voltage.

Ca se Op e n Connec to r: JCL1

Assign ment

Case Open Signal

Ground

1

JCL1

Pin

2

1
2

AUDIO DJ Connector: JDJ1 (optional)

JDJ1

Pin Assignment Pin Assignment

1

15

3
5

SMBDATA

INT_B

ATX_PWROK

11

2
4

SMBCLK

KEY

Digital Audio Connector: JSPDIF_OUT1/(JSPDF1: for v7.0)

1

JSPDI F_OUT1

Pin Assignment

1
2

3

+5V

SPDIF_OUT

Ground

CD-ROM Audio-In Heade r: JCDIN1/(JCDIN2: optional)

1

JCDIN1/2

Pin Assignment

1
2

3
4

Left Channel In put

Ground
Ground

Right Channel In put

Game Header: JGAME1 (option al)

JGAME1

1

216

2
4

6

8
10
12

14
16

Ground
Ground

15

Pin Assign m ent Pin Assignment

1
3

5
7
9

11
13

15

+5V

GP6
GP2

MIDI-OUTR

GP3
GP7

MIDI-INR

NA

Wake On LAN Header: JWOL1 (optional)

1

JWO L1

Pin Assignment

1 +5V_Standby
2

3 Wake up

Ground

+5V

GP4
GP0

GP1
GP5

+5V

12

Front Panel Audio Header: JAUDIO1 (JAUDIO 2 for v7.0)

2
1

JAUD I O1(/ 2: for v 7.0)

Pin Assignment Pin Assi gnment

1
3

5
7

9
11
13

Mic In

Mic Po we r

RT Line Out

Reserved

LFT Line Out

RT Line I n

LET Line In

2
4

6

8
10
12
14

14
13

Ground

Audio Power
RT Line Out

Key

LFT Line Out

RT Line In

LET Line I n

Front USB Header: JUSB2/3

2

1

JUSB2/3

Pin Assignment Pin Assignment

10

1 +5V(fused) 2 +5V(fused)
3

9

5
7
9

USBP
USBP

Ground

KEY

4
6
8

10

USBP
USBP

Ground

NA

Auxiliary Audio-In Co nnector: JAUX1 (only for version 7.0)

1

JAUX1

Pin Assignment

1
2

3
4

Left channel AUX_IN

CD_Ground
CD_Ground

Righ c hannel AUX_I N

Consumer Infrare d Header: JSMB_CIR (only for version 7.0)

Pin Assignment Pin Assignment

1
3
5

7

Ground

CIRRX

NA

SMBDT

2
4
6

8

+5V St andby

CIRTX

Power-on Butt on

SMBCK

2

J_CIR

78

1

13

6 Chan n el Sp e ak er s

Speaker Out/

Right & Left

Line In/
Rear Speaker (Left & Right)

Mic In/ Center & Bass

14

Español

Características del P4TSV

A. Har dware

CPU

Pr oporcion a Soc ket-478 .
Soporta proc es ador Int el Pentium 4 de has t a 3.06GHz.
F ront Side Bus a 400/ 533/ 800MH z.

Soport a Hyper-Threading.
Soport a Northwood y Presc ott CPU de hasta 3. 2GH z.(N o soport a C PU Willamet t e)

Chipset

N orth Bridge: Int el 865G
South Bridge: Intel ICH 5.

Memo ri a Principal

Soporta una o dos DD R canal de dat os de 64-bit wide c on 1 o 2 DIMMs por c anal.
Banda ancha disponible hasta 3. 2GB/s (DDR 400) para modo de canal s imple y

modo de canal doble 6. 4GB/s (DDR 400).

Soporta tecnologia DDR de 128-MB, 256-Mb, 512-Mb y 1 GB.
Soporta solam ent e disposit ivos DDR x8, x16.( No soporta D I MMs regist ered o

DIMMs de doble cara X 16)

Soporta dispositivos de 4 bancos .
Tam año de mem oria máx ima 4GB (no EC C ).

Super I/O

Chip: ITE IT 8712F.
Interf ace Low Pin Count.

Proporciona funcionalidad legacy Super I/ O.
Env iro nm ent C ont rol i niti atives ,

- H/W Monitor

- Controlador Fan Speed

- F unc ión ITE "Smart Guardian"

Ranuras

Tres ranuras de 32-bit PCI bus master.
Una ranura CNR.
Una ranura AGP 4X/ 8X.

IDE Onboar d

Soporta cuatro discos IDE.
Soporta modo PI O 0~4, U ltra DMA 33/66/100 Bus Modo Master.

Soporta 2 puertos Serial ATA (SATA).

- C onf orma c on la es pec if ic ac ión SATA 1.0

15

- Transf erenc ia de datos de hasta 150MB/s

LAN

Chip: RTL8 100B.
Soporta 10 Mb/s y 100 Mb/ auto-negociación

Ca pacidad Hal f/ Ful l duplex.
Soporta adm inis t ración ACPI

AC’9 7 Sound Codec O nboard

Chip: CMI9739A/ CMI9739A (para v.7 .0) .
Conf o r m a c on l a es pecific ac ión AC ’97.

Interfac e AC97 2.2 para CMI9739A/ I nterf ace AC 97 2..3 para CMI 9761A.
Soport a 6 canales.
Soport a mic rófono estereo.

Periféricos Onboard

a. P a r te T raser a

1 puerto se rie.
1 puert o paralelo. (modo SPP/EPP/ECP)
1 puert o VGA.

Puert o de Audio v ertic al.
1 LAN RJ- 45.
Soport a ratón PS/2 y t ec lado PS/2.
4 puert os USB2. 0.

b. P a r t e F r on ta l

1 puert o para disquetera s oporta 2 FDDs con 360K, 720K, 1.2M, 1. 44M y 2.88

Mbytes.

4 puertos USB2 .0.

Dimensiones

F orm a de Fac t or Micro ATX: 24.4 X 24.4cm (W X L)
F orm a de Fac t or Micro ATX: 24.4 X 22.7cm (W X L) (V. 7.0)

B. BIOS & S oftware

BIOS

Award legal BI OS.
Soport a APM1.2.
Soport a ACPI .

S oporta función US B.

Software

S oporta Wa r pspeeder™, 9th T ouch™, F LASHER ™, S tud ioFun !™ ( opcional) .
Ofrec e el más alt o f uncionamient o para Windows 98 SE, Windows 2000,

Window s Me, Window s X P, S CO UNIX etc.

16

C o ntenido del Paquete

Cable HD D X 2
Cable FD D X1

Manual del U s uario X1
Configuración C omplet a del D river CD X1
Aplic ac ión StudioFun! CD X 1 (opc ional)

Cable USB 2. 0 X1 (opc ional)
Cable S/PDIF X 1 (opcional)
Panel Trasero I/O para carc asa Micro ATX X1 (opc ional)

Cable Serial ATA X1 (opc ional)
Cable de Interruptor de Corriente para Serial ATA X1 (opcional)

Cómo instalar un Puente

La ilustración muestra cómo inst alar un puent e. Cuando el Jumper C ap está ubicado en
los contact os , el puente está en “c lose”. Si no hay Jumper C ap ubicado en los contactos,

el puente está en ”open”. La siguiente ilust rac ión muest ra un contacto 3 en el que los
cont actos 1y 2 están “close” cuando el Jumper Cap está ubicado en los dos contact os.

Puent e open Puente close Contac to 1-2 close

In stalación del CPU

Paso 1: Empuje la palanca hacia af uera del socket y levante la palanc a hasta un ángulo de

90 grados .

Paso 2: Fí jese por el punt o blanc o o m árgen cort ado. El punt o blanc o o márgen cortado

deberí a apunt ar hacia el piv ote de la palanca. La C PU solam ent e se fijará en una
sola correct a orientac ió n.

Paso 3: Tome el CPU firmemente hacia abajo, y cierre la palanca para completar la

instalación.

Paso 4: Ponga el ventilador de la CPU en el CPU y asegúrelo. Conecte el cable de

17

corriente del v entilador de la CPU al JCFAN1. Ésto com pleta la instalac ión.

paso 1 paso 2 paso 3 paso 4

Cabezal del Sistema de Ventilación del CPU: JCFAN1

Contacto Asignación

1

1

JCFAN1

2
3

Tierra

+12V

FAN RPM Sense

Cabezal del Sistema de Ventilación: JSFAN1

Contacto Asignación

Tierra

+12V

FAN RPM Sense

1

JSFAN1

1
2

3

Módu los DDR DIMM: DDRA1-2, DDRB1-2

Soporta hast a cuatro DDR DIMMs (dos DIMMs por canal), doble o/y una c ara.
Para manejarse con el Dual Channel, los DIMMs deben ser insertados en

pares idénticos. Debe ser la combinaciٛ n del D DR A1+DDRB1 (DIMMs azules)
o DDR A2+DDRB2 (DIMMs blancos). Para más inf ormac ión s obre la operac ión

del D ual Channel por f avor entre a la página web: www.biostar.com.tw

)

DRAM Tiempo de Acc es o: 2.5V U nbuffered/ no registered (s in ECC ) DDR

SDR AM PC 2100/ PC2700/ PC3200 Tipo requerido.

DRAM Tipo: 128MB/ 256MB/ 512MB/ 1GB Módulo DI MM (184 c ontactos)

T otal d el Tam año de la Memo ri a con U n buff ered / R egi s tered DI MMs

18

Localización d el

Socket DIMM

Módu lo DDR To tal d el

Tamaño de la

Memoria

(MB)

DDRA1 128MB/256MB/512MB/1GB*1
DDRA2 128MB/256MB/512MB/1GB *1

DDRB1 128MB/256MB/512MB/1GB *1
DDRB2 128MB/256MB/512MB/1GB *1

***Solam e nte par a re f e re nc ia* **

Máxima

4GB

Módu los DDR DIMM: DDRA1, DDRB1 ( para v. 7. 0)

Soporta hast a 2 DDR DIMMs (dos DIMMs por canal), doble o/y una cara.

DRAM Tiempo de Acc es o: 2.5V U nbuffered/ no registered (s in ECC ) DDR

SDR AM PC 2100/ PC2700/ PC3200 Tipo requerido.

DRAM Tipo: 128MB/ 256MB/ 512MB/ 1GB Módulo DI MM (184 c ontactos)

T otal d el Tam año d e l a Memo ri a con Unbuffered / Regi st er ed D I MMs

Localización d el

Socket DIMM

DDRA1 128MB/256MB/512MB/1GB*1
DDRB1 128MB/256MB/512MB/1GB *1

Módu lo DDR To tal d el

Tamaño de la

Memoria

(MB)

Máxima

2 GB

***Solam e nte par a re f e re nc ia* **

In stalación del Módulo DDR

1. Abra una ranura de DI MM presionando el clip
de retenc ión hacia afuera. Aliñe el DIMM en la
ranura tales que la muesca en el DIMM encaje
en la c um brera de la ranura.

2. Ins erte el DIMM vert icalm ente y f irm em ente en
la ranura hasta que el clip de retención vuelva a

su posición original y el DIMM esté
correctamente colocado.

19

Puen tes, Cabe zales, Con e ct ores y Ran u ras

Conector de Disque tera: FDD1

La placa madre proporciona un conector estándar para disquete que soporta
disquetera de 360K, 720K, 1.2M, 1.44M y 2.88M. Éste conector utiliza cables

proporc ionados por el dis quete.

Conector del Disco Duro: IDE1/ IDE2

La plac a madre tiene un controlador de 32-bit PCI ID E que proporciona Modo PIO
0~5, Bus Master, y func ionalidad Ultra DMA 33/ 66/ 100. Tiene dos conectores

HDD : IDE1 (prim ario) y IDE2 (sec undario).
Los conectores ID E puede conectar a un disco m ast er y uno esc lav o, así puede

conectar hasta cuatro discos duros. El primer disco duro debe estar siempre
conectado al IDE1 .

Ranuras de Interconexión del Componente Periférico: PCI1-3

Ésta plac a madre est á equipada c on 3 ranuras estándar PCI. PCI es la sigla para
Interconexión del Componente Perif érico, y es un bus estándar para tarjetas de
expansión. Ésta ranura PCI es tá diseñado con 32 bits.

Ranura del Puerto Acelerado para Gráficos: AGP1

Su m onit or s e fijará directament e a la t arjeta de video. Ésta placa madre s oport a
tarjetas de v ideo para ranuras PCI , pero también es tá equipado c on un puerto

AGP. La tarjeta AGP tomará ventaja de la tecnología del AGP para el
mejoramiento de la eficiencia y funcionamiento del video, especialmente con

gráf icos 3D.

Ranura de B anda de S uspensión de Comunicación y Red: CNR1
(no para v.7.0)

La especificación CNR es una abierta Industria de Arquitectura Estándar, que
def ine una tarjet a de interf ac e escalable del hardware en el que soport a s olament e

modem.

Conector Serial ATA: JSATA1/JSATA2

La placa madre tiene un controlador PCI al SATA con 2 canales SATA de
interf ace, que satisf ace SATA 1.0 spec y transfiere datos a una v elocidad de

1.5GHz.

1234567

JS ATA1 / JSATA2

Contactos Asignación Contactos Asignación

1
4

5
7

Tierra

TX­RX-

Tierra

20

2
4

6

TX+

Tierra

RX+

n

Conector del Panel Frontal: JPANEL1

SLP

JPANEL1

Con-

tactos

11 HDD LED (-)
13 Tierra 14 Botón de

15 Control de

17 NA 18 KEY
19 NA 20 KEY

21 +5V 22 Tierra
23 IRTX

Asignación Función Con-

1 +5V 2 Cont rol de

3 NA 4 Tierra
5 NA 6 NA NA

7 Altav oz
9 HD D LED (+ ) 10 Corriente LED (+)

2
1

Reinicio

PWR_LED

SPK

del Disco Duro

de R einic io

Conec tor I rD A

HLED

Conector

del Alt avoz

LED

Botón

RST

tactos

8 Corriente LED (+)

12 Corriente LED (-)

16 Tierra

24 IRRX

IRON/OFF

24
23

IR

Asignación Función

Botón

Suspension

Encendido

de Sus pensio

Corrie nte

LED

Botón de

Encendido

Conector IrDA

Cabe zal de Entrada de Audio CD-ROM: JCDIN1/ JCDIN2

1

JCDIN1/ 2

Contac-

tos

1
2

3
4

21

Asign ación

En trada de l Canal Izquierdo

Tierra
Tierra

En trada de l Canal Der echo

Conectores de Corriente: JATXPWER1/ JATXPWR2

10

1

JATXPWR1

20

11

Con-

tactos

1
2

3
4

5
6
7

8
9

10 +12V 20 +5V

Asignación Con-

tactos

+3.3V
+3.3V

Tierra

+5 V

Tierra

+5 V

Tierra

PW_OK
+5V_SB

11
12

13
14

15
16
17

18
19

Asignación

+3. 3V

-12V

Tierra

PS_ON

Tierra
Tierra
Tierra

-5V
+5V

JATXPWR2

12

3

Con-

tactos

Asignación Con-

1
2

+12V
+12V

tactos

3
4

Asign ación

Tierra
Tierra

5V / 5VSB Selección para KB: JKBV1 (no para v.7.0)

JKBV1 Asignación Descrición

1 3

Contacto 1-2 clo se

1 3

Contacto 2-3 clos e

+5 V

+5V_SB

5V para t eclado y ratón

5V st andby de teclado y rat ón para

e ncender su si stem a

Conector de la Carcasa Abi erta: JCL1

12

JCL1

tactos

Con-

1
2

Señal de la Carcas a Abierta

Asignación

Tierra

22

s

5V/ 5VSB Selección para USB: JUSBV1/ JUSBV2/JUSBV3_4
(no para v.7.0)

JUSBV1/JUSBV2/

JUSBV3_4

1 3

Contacto 1-2 clos e

1 3

Contacto 2-3 clos e

Borrar Pue nte CMOS: JCMOS1

1 3

1 3

JCMOS1 Asignación

Asignación Description

Pin 1-2 C lose

Pin 2-3 C lose

+5 V

+5V_SB

※ Procedimientos para Borrar CMOS:

1. Quite el c able de corriente del AC.

2. Fijar el puente en el “contacto 2-3 c los e”.

3. Espere 5 segundos.

4. Fijar el Puente en el “c ont act o 1-2 c lose”.

5. Encienda AC.

6. R econf igure la cont raseña deseada o borre datos CMOS.

Conector Audio DJ: JDJ1 (opcion al)

5V JU SBV1 para puerto JU SB1

5V J U SBV2 para puerto JRJ45U SB1

5V JU SBV3_4 para puerto JU SB2/3

JUSBV1 5V st andby para enc ender el

puerto JU SB1

JUSBV2 5V st andby para enc ender el

puert o JRJ45USB1

JUSBV3_4 5V st andby para enc ender

los puertos JUSB2/3

Operac ión N ormal (default)

Borra dat os C MOS

JDJ1

15

Con-

tactos

1
3

5

Asignación

SMBDATA

INT_B

ATX_PWROK

23

Con-

tacto

2
4

Asignación

SMBCLK

KEY

Cabezal de Juego: JGAME1 (opcional)

JGAME1

1

216

2
4

6
8

10
12

14
16

+5V

GP4
GP0

Tierra
Tierra

GP1
GP5

+5V

15

Contactos Asignación Contactos Asignación

1
3

5
7

9

11
13

15

+5V

GP6
GP2

MIDI-OUTR

GP3
GP7

MIDI-INR

NA

Cabezal del Panel Frontal de Audio: JAUDIO1(/2 para v7.0)

2
1

JAUDIO1/2

Contacto Asign ación Contacto Asi gnación

1
3
5

7
9

11
13

Entrada del Mic

Corriente del Mic

Salida de Lí nea R T

Reserv ado

Salida de Lí nea LF T

Entrada de Línea R T

Entrada de Línea LET

2
4
6

8

10
12

14

14
13

Tierra

Corriente de Audio

Salida de Lí nea R T

Key

Salida de Lí nea LF T

Entrada de Línea R T

Entrada de Línea LET

Conector de Audio Digital: JSPDIF_OUT1/(JSPDF1 para v.7.0)

JSPDI F_OUT1

1

Contac

tos

1
2

3

24

Asignación

+5V

SPDIF_OUT

Tierra

Cabezal Wake On LAN: JWOL1 (opcioan l)

1

JWOL1

Contacto Asignación

1 +5V_S B
2

Tierra

3 Wake up

Cabezal Frontal USB: JUSB2/3

2

1

JUSB2/3

10

9

Con-

tactos

1
3

Asignación

+5V(fused)

USBP

Con-

tactos

2
4

5 USBP 6 USBP
7
9

Tierra

KEY

8

10

Conectores del Panel Trasero

Asignación

+5V(fused)

USBP

Tierra

NA

Raton

Tecl ado

JKBMS1

USB

JUSB1

Pu erto Paralelo

1

1 3

COM 1

JCOM1

3

JVGA1

25

LAN

USB

JRJ45USB1

Entrada de Linea/
Surround

Sali da de l Al t voz
Entrada del Mic/

Bass& Center

JAUDIO

Deutsch

Spe zifikat ionen von P 4TSV

A. Har dware

CPU

Unterstützung für Sockel 478.
U nterstüt zung für den Intel Pentium 4 Prozessor bis zu 3. 06GH z.
F SB mit 400/ 533/ 800MHz.
Unterstützung für Hyper-T hreading- Technologie.

Unterstützung für Nort hwood und Prescott (Sock el 478) CPU. (Willam ette wird

nicht untergestützt), bis zu 3.2GHz.

Chipsatz

N orthbridge: Int el 865G.
So u thbr idg e: Intel IC H5 .

Hauptspeicher

U nterstüt zung für ein oder zwei 64-Bit Breite DDR-Dat enkanal mit ein oder zwei

DIMMs pro Kanal.

Verf ügbare Bandbreite bis zu 3. 2GB/s (DD R400) f ür Einzeln-Kanal-Modus und

6.4GB/s (DD R 400) in Dual-Kanal-Modus.

U nterstüt zung für 128-MB, 256-Mb, 512-Mb und 1-GB DDR Technologien.
U nterstüt zung f ür x8, x 16 DDR Gerät e.( R egistris t riert e DIMMs oder doppels eitig X

16 D I MMs werden nicht untergest ützt)

Unterstützt auf maxim al vier DDR Geräte.
D ie m ax imale Speichergröße ist 4GB ohne ECC.

Super I/O

Chip: ITE IT 8712F.
Low Pin C ount Int erface.
D ie m eisten gemeinsam en vergebraucht en Super I/ O Funktionen werden gelief ert.
Umweltkontroll-Initiative:

- H/W Monitor

- Vetilator-Geschwindigkeit-Controller

- I TE's "Smart Guardian" Funkt ion

Slots

D rie 32-Bit PCI-Bus-Slot s.
Ein CN R-S lot .

Ein AGP 4X/ 8X Slot.

Onboard-IDE

Unterstützung fü r vi er IDE Diskettenl au fwe rke.
U nterstüt zung für PIO Modus 0~4, Ultra DMA 33/66/100 Bus Master Modus.

26

Unterstützung für zwei Serial-ATA-Ports (SATA).

- Ent s pricht der Spezif ik ation von SATA 1.0

- D at enübertragung bis auf max im al 150MB/ s

LAN

Chip: RTL8 100B.
U nterstüt zung für 10 Mb/s und 100 Mb/ s Auto-Negotiat ion.
Halb/Voll-Duple x Fä higkei t.

U nterstüt zung für ACPI Power Management

Onboard AC’97 Sound Codec

Chip: CMI9739A/ CMI9761A (für V .7.0)
Ent s pricht der Spezif ikation von AC ’97.

AC 97 2. 2 Interf ace für CMI9739A/ AC972.3 Interf ac e f ür CMI9761A.
Unterstützung für 6-Kanal.

Unterstütz ung für stereo mi c rofon.

Onboar d-Periph eriegeräte

a. R ü c kwan d

1 s erielle Sc hnittstelle.
1 parallele Sc hnittstelle. (SPP/EPP/ECP Modus )

1 VGA Sc hnit tstelle.
1 v ert ik ale Audio-Schnittstelle.
1 R J -45 LAN Jac k.
Unterstützung PS/2-Maus und PS/2-Tastatur.

4 USB2.0-Ports.

b. Vorder seit e

1 F loppy -Port mit Unterstüt zung für 2 Diskett enlauf werke.(360KB, 720KB, 1.2MB,

1.44MB und 2.88MB)

4 USB 2.0- P or ts .

Abmessungen

Mic ro ATX Form Fac t or: 24.4 X 24.4 cm (W X L)
Mic ro ATX Form Fac t or: 24.4 X 22.7 cm (W X L) (für v.7.0)

B. BIOS & S oftware

BIOS

Award legal BI OS.
Unterstützung für APM1. 2.
Unterstützung ACPI.

Unterstütz ung USB Funkion.

Software

Unterstützung für Warpspeeder™, 9th Touch™, Flasher™, StudioFun! ™ (optional).
Unter stützung für die am meis ten ver breite ten Betriebsyst e me wi e Win d ows

98SE. , Windows 2000, Windows ME, Windows XP and SCO UNIX us w..

27

Verpack ungsinhalt

HDD Kable X 2
FDD Kable X1

Benut zer Handbuch X1
Treiber C D für Installation X1
St udioF un! Anwendung CD X 1 (opt ional)

USB 2.0 Kable X1 (opt ional)
S/ PD IF Kable X 1 (optional)

I/O-R üc k wand für Micro ATX Gehäuse X1 (optional)
Serial ATA Kable X1 (opt ional)

Serial ATA N et zsc halter Kable X1 (optional)

Ei nst e l lu ng de r Jum per

Die Abbildung verdeutlicht, wie Jumper eingestellt werden. Pins werden durch die
Jum per-Kappe v erdeckt, ist der Jum per ”geschlossen”. Keine Pins werden durch die
Jum per-Kappe verdeckt, is t der Jum per “geöffnet”. Die Abbiildung zeigt einen 3-Pin
Jumper dessen Pin1 und Pin2 ”geschlossen“ sind, bzw. es bef indet sich eine
Jum per-Kappe auf dies en beiden Pins.

Jumper geschlossen Jumper geöffnet Pin1-2 geschlossen

In stallat ion der CPU

Sc hritt 1 : Z iehen Sie den H ebel s eitlich vom Sockel weg. Heben Sie den Hebel dann

in 90-Grad-Winkel nac h oben.

Sc hritt 2 : Suchen Sie nac h der scharfen Kant e, die auf D rehpunkt des Hebels

weisen m uss . Die CPU passt nur, wenn s ie ric htig aus geric ht et ist.

Sc hritt 3 : D rück en Sie die CPU f est in den Sock el und s c hließ en Sie den Hebel.
Sc hritt 4 : Ste cken Sie Ih ren CPU-Lüf ter auf die CPU. Schließen Sie die Stromversorgung sstecker

für CPU -Lüft er an JCFAN1 an. D ann beenden Sie die Installat ion.

28

Schritt 1 Schritt 2 Schritt 3 Schritt 4

CPU Fan Headers: JCFAN1

1

JCFAN1

Pin Beschreibung

1
2
3

S ystem Fan Headers: JSFAN1

Pin Beschreibung

1

JSFAN1

1
2

3

Masse

+12V

FAN RPM Sensor

Masse

+12V

FAN RPM Sensor

DDR DI MM Module s: DDRA1- 2, DDRB1-2

Maximal werden 4 einseitig oder doppeltseitig DDR-DIMMs untergestützt.(2

DIMMs pro Kanal).

Für Dual-Kanal Operat ion,daß DIMMs in indentischen Paar installiert werden
müssen. Es is unbedingt, DDRA1mit DDRB1(blaue DIMMs) oder DDRA2 mit
DDRB2 (weiße DIMMs) als ein Paar zu verwenden. Mehr Informationen über
Dual-Kanal Operation finden Sie auf der Website von Biostar unter
http://www.biostar.com.tw

DRAM-Zugriffs zeit: 2.5V unbuf f ered/ nicht regist rierter (ohne EC C) DDR SDR AM

DRAM-Ty p: 128MB/ 256MB/ 512MB/ 1GB D I MM-Module (184-Pin)

PC2100/ PC 2700/ PC 3200 Ty p erforderlich.

29

Gesa m t Speichergröße von ni cht reg istrie rte r DIMMs

DIMM-Sockel

Standort

DDRA1 128MB/256MB/512MB/1GB*1
DDRA2 128MB/256MB/512MB/1GB *1
DDRB1 128MB/256MB/512MB/1GB *1

DDRB2 128MB/256MB/512MB/1GB *1

DDR-Modul Speichergröße

(MB)

maximal ist

4GB

**Nur als Refer enz***

DDR DI MM Module s: DDRA1, DDRB1 ( für v7.0)

Maximal werden 2 einseitig oder doppeltseitig DDR-DIMMs untergestützt.(2
DIMMs pro Kanal).

DRAM-Zugriffs zeit: 2.5V unbuf f ered/ nicht regist rierter (ohne EC C) DDR SDR AM

PC2100/ PC 2700/ PC 3200 Ty p erforderlich.

DRAM-Ty p: 128MB/ 256MB/ 512MB/ 1GB D I MM-Module (184-Pin)

Gesa m t Speichergröße von ni cht reg istrie rte r DIMMs

DIMM-Sockel

Standort

DDRA1 128MB/256MB/512MB/1GB*1
DDRB1 128MB/256MB/512MB/1GB *1

DDR-Modul Speichergröße

(MB)

maximal ist

2GB

**Nur als Refer enz***

In stallat ion von DDR-Modul

1. Öf f ne n S ie e in en D I M M-S lo t s, i n dem Si e die
seitlich Chips nach außen drücken. R ichten

Sie das D IMM-Modul so über dem Slot aus ,
dass das Modul mit der Kerbe in den Slot

passt.

2. Drücken Sie das DIMM-Modul in den Slot,
bis die seitlic hen C lips zuschnappen und das
Modul fe st si tzt.

30

Jump ers, H eade rs, Anschlüs s e & S lot s

Diskettenanschluss: FDD1

Das Motherboard enthält einen st andardmäßigen Diskettenans chluss, der 360K-,
720K-, 1.2M-, 1.44M- und 2.88M-Disketten unterstützt. Dieser Anschluss

unt ers tützt die mit gelief erte Bandkabel des Diskettenlauf werks.

Fe stplatt enanschlüsse: IDE1 und ID E2

Das Mainboard hat einen 32-Bit Enhanced PCI IDE-Controller, der die Modi
PIO0~4, Bus Mast er sowie die U ltra DMA/33/ 66/100/133- Funkt ion zur Verfügung

stellt. Dieser ist mit zweii HDD-Anschlüssen versehen IDE1 (primär) und IDE2
(sekundär).

Die ID E-Anschlüsse k önnen eine Master- und eine Slav e-Festplatte v erbinden, so
dass bis zu 4 Festplatten angeschlossen werden können. Die erste Festplatte

sollte im m er an IDE1 angeschlossen werden.

Periphera l Component Int erconnect Slots: P CI1-3

Dieses Motherboard ist m it 3 standardmäß igen PCI-Slots ausgestattet. PC I steht
für Peripheral Component Interc onnect und bezieht sich auf einem Busst andard für

Erweiterungskarten, der den älteren ISA-Busstandard in den meisten
Schnittst ellen ers etzt hat. Dieser PCI-Slot ist f ür 32 bits v orgesehen.

Accelerate d Graphics Port Slot: AGP1

Ihr Monitor wird direkt an die Grafikkarte angeschlossen. Dieses Motherboard
unterstützt Grafikkarten f ür PCI-Slots, aber es ist auch mit einem Accelerated

Graphic s Port ausges tattet. AGP-Karten v erwenden die AGP-Technologie, um die
Wirks amk eit und Leistung v on Videosignalen zu v erbessern, besonders wenn es

sich um 3D-Graf iken handelt.

Commun ication Netwo r k Rise r Slot: CNR1 (no f ür v7.0)

Die CNR-Angaben entsprechen einer off enen I ndustry Standard Architecture, und sie
definieren eine Hardware-skalierbare Riser-Card-Schnittstelle, welche nur Audio,

Netzwerk und Modem unterstützt.

Serial ATA Co nnector: JSATA1/JSATA2

Auf dies en Motherboard gibt es ein PCI -to-SATA C ont roller m it 2-Kanal Interfac e,
die der Spezifikation von SATA 1.0 ent spricht ( D t enübert ragung m it 1.5GB/S)

1234567

JSA TA1/ JSATA2

Pin Beschreibung Pin Beschreibung

1
4
5

7

Masse

TX­RX-

Masse

31

2
4
6

TX+

Masse

RX+

Stromversorgungsanschluss: JATXP WER1/JATXPWR2

10

1

JATXPWR1

20

11

PIN Beschreibung PIN Beschreibung

1
2
3

4
5

6
7
8

9

10

+3.3V
+3.3V

Masse

+5 V

Masse

+5 V

Masse

PW_OK
+5V_SB

+1 2V

11
12
13

14
15

16
17
18

19
20

+3. 3V

-12V

Masse

PS_ON

Masse
Masse

Masse

-5V

+5V
+5V

12

3

JATXPWR2

PIN B esch reibu ng PI N B eschreibu ng

1
2

+12V
+12V

3
4

Masse
Masse

Auswahl von 5V/ 5V_S B für USB: JUSBV1/ JUSBV2/JUSBV3_4
(no für v.7.0)

JUSBV1/JUSBV2/

JUSBV3_4

1 3

Pin 1-2 geschlossen

1 3

Pin 2-3 geschlossen

Beschreibung Funktion

+5 V

+5V_SB

JU SBV1: 5V für JUSB1
JU SBV2: 5V für JRJ 45USB1

JU SBV3_4: 5V für J USB2/3

JU SBV1: 5V bereit zum Reboot von

JU SBV2: 5V bereit zum Reboot von

JU SBV3_4: 5V bereit zum Reboot von

JUSB1

JRJ45USBV1

JUSB2/3

32

Anschlüsse für die Vo rderseite: J PANEL1

* S ch l ü ss e : Kei n P i n

SLP

JPANEL1

Pin Beschreibung Funktion Pin Beschreibung Funktion

1 +5V 2 Sleep

3 Kein 4 Masse
5 Kein 6 Kein Kein

7 Lautsprecher

9 HDD LED (+) 10 Power LED (+)
11 HDD LED (-)
13 Masse 14 Power-Knopf
15 Reset

Kontrollieren

17 Kein 18 Schlüsse
19 Kein 20 Schlüsse

21 +5V 22 Masse
23 IRTX

2
123

PWR_LED

SPK

Lautsprecher

Zurücksetzn

HLED

Anschluss

Festplatte

LED

-Knopf

IrDA-

Anschluss

RST

8 Power LED (+)

12 Power LED (-)

16 Masse

24 IRRX

IRON/OFF

24

IR

Kontrolliere n

Schlafen-

Knopf

POWER

LED

Power-On

Knopf

IrDA

Anschluss

Auswahl von 5V/5V_SB für Tastatur/Maus: JKBV1 (no für
v7.0 )

JKBV1 Beschreibung Funktion

1 3

Pin 1-2

geschlossen

1 3

Pin 2-3

geschlossen

+5 V

+5V_SB

33

5V für Tas tatur und Maus

5V bereit für Tastat ur und Maus zum

Reboot von ihren Sy s tem

Jumper zum Löschen CMOS: JCMOS1

1 3

1 3

JC MOS1 B eschreibu ng

Pin 1-2 geschlossen

Pin 2-3 geschlossen

Normale Operation (Def ault)

CMOS-Daten Lös c hen

※ Pr ozed u r en zu m L ösc h en d e s C M OS :

1. Aussc halten Sie den AC-Netzstec k er.

2. Lassen Sie Pin 2-3 von JC OMS1 ges hclossen sein.

3. Bitte wart en Sie 15 Sekunden.

4. Lassen Sie Pin 1-2 von JC OMS1 ges hclossen sein.

5. Schließ en Sie den AC-Netzsteck er an.

6. Z urüc kset zen Sie das Kennwort nach ihrem Wille oder lös c hen
Sie die C MOS-D aten.

Anschluss für Gehäuse-Ö ffnen: JCL1

12

JCL1 2

Pin

1

Beschreibung

Gehäus e Öffnen Signal

Masse

AUD IO DJ Anschluss: JDJ1 (opt ionnal )

JDJ1

Pin Beschreibung Pin Beschreibung

1

15

3
5

SMBDATA

INT_B

ATX_PWROK

2
4

SMBCLK

Schlüsse

CD-ROM Audio-In Heade r: JCDIN1/(JCDIN2: optionnal)

1

JCDIN1/2

Pin Beschreibung

1
2

3
4

Link-Kanal Eingabe

Masse
Masse

Rec ht -Kanal Eingabe

34

Game Header: JGAME1 (option na l)

15

Pin Beschreibung Pi n Beschreibung

1
3
5

7
9

11
13

15

+5V
GP6
GP2

MIDI-OUTR

GP3
GP7

MIDI-INR

Kein

1

216

JGAME1

10
12

14
16

2
4
6

8

+5V
GP4
GP0

Masse
Masse

GP1
GP5

+5V

Front Panel Audio Header: JAUDIO1 (JAUDIO 2 for v.7.0)

2
1

JAUDIO1

Pin Beschreibung Pin Beschreibung

1
3

5
7

9

11
13

Mikrofon-Eingang

Mikrofon-Betriebsspannung

Rec ht Line-Out

Reserv iert
Link Line-Out
Recht Line-In

Link Line-In

2
4

6

8
10
12

14

14
13

Masse

Audio-Spannung

Recht Line-Out

Schlüsse
Link Line-Out
Recht Line-In

Link Line-In

Digital Audio Anschluss: JS P DIF_O UT1/(JSPDIF1 for v.7.0)

JSPDI F_OUT1

1

Pin Beschreibung

1 +5V
2
3

35

SPDIF_OUT

Masse

g

Wake On LAN Header: JWOL1 (optionnal)

1

JWO L1

Pin

1 +5V_SB
2

3 Wake-up

Beschreibung

Masse

Front USB Header: JUSB2/3

Pin Beschreibung Pin Beschreibung

10

9

+5V(geschm elzt)

1
3

5
7

9

Schlüsse

USBP
USBP

Masse

2
4

6
8

10

2

1

JUSB2/3

Anschlüsse für die Rückwand

+5V(geschmelzt)

USBP
USBP

Masse

Kein

Maus

Tastatur

USB

JUSB1

1

1 3

COM 1

JCOM1JKBMS1

Parallel

3

JVGA1

36

LAN

USB

JRJ45USB1

Line-In/ Surround

Lautsprecher-Ausgan

Mikrofon-Ei ngang
/ B a s s&C ent er

JAUDIO

Français

Caractéristiques de P4TSV

CPU

Of f re les Sock et-478.
Supporte le processeur Int el Pentium 4 jusqu’à 3.06GHz.

Supporte Intel P ent ium 4 Nort hwood CP U . ( Willamet t e not s upported)
Supporte Intel Pentium 4 478 Prescott CPU jusqu’à 3.2GHz..
F onctionnant en Bus Frontal de 400/ 533/800MH z.

Supporte Hyper-Threading. (seulm ent pour onboard VGA)

Chipset

N orth Bridge: Int el 865G
South Bridge: Int el ICH5

Mémoire Principale

Prend en charge un ou deux canaux de données DDR de 64 bits de large

avec 1 DIMM par canal.

Bande passant disponible jus qu’à 3.2Go/s (DDR400) pour le mode c anal

sim ple et 6.4Go/s (DDR 400) pour m ode canal double.

Prend en charge les t ec hnologies DDR 128 Mo, 256 Mo, 512 Mo, 1Go.
Prend en charge seulem ent les périphériques DDR x8, x 1 6. (N e pr end p as

en charge les D I MM et ECC en registres)
Prend en charge quatre banques de m émoire.
La taille m ax imum de la mémoire est de 4Go (no ECC ).

Super E/S

Puce: ITE IT8712F.
I nt erf ace de Com pt age de Broche F aible.

Of f re la f onctionnalit é Super E/S hérit ée la plus couramm ent utilisée.
Initiatives de Contrôle d’Environnement,

- Moniteur H/ W

- Fonc t ion "Sm art Guardian" de ITE
Slots

3 s lots de maît rise de bus PCI 32 bits.
U n slot CNR . (optionnel)

U n slot AGP 4X/8X.

IDE Interne

Supporte quat re disques durs I DE.
Supporte PI O Mode 0~4, le Mode Maît re et le Mode de Maîtrise de Bus Ult ra

DMA 33/ 66/ 100

Pris e en c harge de 2 ports série ATA (SATA).

- c onf orm es aux s pécif ica t ions SA T A 1. 0.

- v ites s e de transfert des données jusqu'à 150 BM/ s..

LAN (optionnel)

RealTek RTL8100B.
Supporte Négociat ion autom at ique :10/100 Mb/s.

Full/Half Duplex.

37

Supporte ACPI, PCI Power m anagement.

Codec Son AC ’ 97 In tern e

CMI 9739A/CM I9761A (pour v.7.0)
C onforme aux spéc ifications du codec AC’97.
Supporte 6 canaux , stereo mi cr ofon .

I nt erf ace AC 97 2.2/ Interface AC97 2. 3.

Périphériques Internes

a. Côté arrière

1 ports série, 1 ports VGA.
1 port parallèle (m ode SPP/EPP/EC P)
Ports audio en pos ition v erticale.

1 port R J -45 LAN.
So uris P S/ 2 et cl av ie r PS/ 2.
4 ports USB2. 0.

b. Côté frontal :

1 port dis quette prenant en c harge 2 FDD av ec 360K, 720K, 1.2M, 1.44M et

2,88Mo.

4 ports USB2. 0.

BIOS

AW ARD legal Bios .
Supporte APM1.2.

Supporte ACPI

Supp orte la Fonc tion USB.

Système d ’ Exploitati on

Of f re les meilleures perf ormances pour Windows 98 SE, Windows 2000,

Windows Me, Windows XP, SCO U NIX etc.

Supporte WarspeederTM, 9th TouchTM, FLASH E RTM, StudioF unTM

(optionnel).

Dimensions

F ac teur de Forme ATX: 24. 4 cm X 24.4 cm (l X L)
F ac teur de Forme ATX: 24. 4 cm X 22.7 cm (l X L) (pour v. 7.0)

Conten u de l'Em ballag e

C âble de Disque D ur X1
C âble de Lecteur de Disquet t e X1

Manuel d’ut ilis at ion X1
C D de Sollicitat ion StudioFun! X 1 (Opt ionnel)
C âble USB X1 (Optionnel)

Panneau d’E/S Arrière pour Boît ier F lex X 1 (Optionnel)
C D de Pilot e Complet X 1
C âble S/PD IF X 1 (optionnel)

C âble ATA Série X 1 (optionnel)
C âble de Comm ut ateur d’Alim entat ion ATA Série X 1 (optionnel)

38

WarpSpeeder

Introduction

[ W arpSpeeder™ ], a new powerf ul cont rol utility, f eatures three user-f riendly functions
including Ov erclock Manager, Ov ervoltage Manager, and H ardware Monit or.

With the Over clock Manage r, users can easil y adjust the frequency the y prefer or they can
get t he best CPU perf ormanc e wit h jus t one click . The Ov ervoltage Manager, on the other

hand, helps to power up CPU core voltage and Memory voltage. The cool Hardware
Monitor smartly indic ates the t emperatures, volt age and CPU fan speed as well as the

chips et inform at ion. Also, in t he About panel, you c an get det ail des c ript ions about BI OS
model and chipsets. In addition, t he frequency status of CPU, memory, AGP and PC I

along with t he C PU s peed are synchronically shown on our m ain panel.
Moreov er, to protect users' com puter syst em s if the s etting is not appropriat e when testing

and results in system f ail or hang, [ WarpSpeeder™ ] technology assures the system
st ability by automat ically reboot in g the c om puter and then restart t o a speed that is either

the original sys t em speed or a s uit able one.

System Requirement

OS Support : Windows 98 SE, W indows Me, Windows 2000, Windows XP
Direc t X: DirectX 8.1 or abov e. (The W indows XP operating sys tem inc ludes D irectX 8. 1. If

you us e W indows XP, y ou do not need t o inst all D irectX 8. 1. )

39

Installation

1. Exec ute the setup ex ecution f ile, and then the f ollowing dialog will pop up.
Please clic k “Nex t ” button and follow the def ault procedure to install.

2. When you see the f ollowing dialog in setup procedure, it means setup is
comple ted . If th e “Launch the War pSpeeder Tray Utility” checkbox is che cked,
the Tray Icon utility and [WarpSpeeder™] utility will be automatically and
imm ediately launched after you click “Finish” butt on.

40

Usage

The foll o wing fi gu r es ar e ju st on l y for r e f er enc e, th e s c re en prin t ed in th is user ma nual w ill
change according to your motherboard on hand.

[W arpSpeeder™] includes 1 tray icon and 5 panels:

1. Tray Icon:
Whenev er the Tray Icon utility is launched, it will dis p lay a litt le tray ic on on t he right side of

Windows Tas k bar.

41

This utility is responsible f or conveniently invok ing [WarpSpeeder™] Utility. You can use
the m ouse by clicking t he lef t butt on in order t o inv oke [WarpSpeeder™] direct ly from the

litt le t ray icon or you can right-c lick t he lit t le t ray icon to pop up a popup menu as following
figure. The “Launch Utility” item in the popup menu has the sam e function as m ouse
left -c lick on tray icon and “Exit ” item will close Tray Ic on utility if selec t ed.

2. Main Panel
If you click the tra y icon, [ WarpSpeeder™ ] utility will be in voke d. Please refer
do the following figure; the u tility’s fi rst window you will see is Main Panel.

Main Panel contains features as follows:

a. Display the C PU Speed, CPU ex ternal c lock, Mem ory clock, AGP c lock, and PCI
cloc k inform at ion.

b. Contains About, Voltage, Overclock, and Hardware Monitor Buttons f or invoking
respective panels.

c. With a user-friendly Status Animation, it can represent 3 overclock percentage
stages:

Man walking => ov erclock percentage from 100% ~ 110 %
Pant her running => ov erc loc k perc entage from 110% ~ 120%

Car racing => ov erclock percentage f rom 120% ~ abov e

42

3. Voltage Panel
Click t he Volt age button in Main Panel, the button will be highlighted and the Voltage

Panel will slide out to up as t he f ollowing figure.
In this panel, y ou can decide to increase C PU core voltage and Mem ory v oltage or not.

The def ault setting is “No”. If y ou want to get the best perf ormance of ov erc locking, we
r ec ommen d y ou c lic k th e opti on “Y es”.

43

4. Overclock Panel
Click t he Ov erclock button in Main Panel, the butto n will be highlighted and the Ov erc lock

Panel will slide out to left as the following figure.

44

Overclock Panel contains the these features:

a. “–3MHz button”, “-1MHz but ton”, “+1MHz butt on”, and “+3MHz button”: provide user
the a bility t o do real-t ime ov erc lock adjustment .

Warning: Manually overclock is potenti ally dangerous, especially when the
overclocking percentage is over 110 %. We strongl y recommend you verify

every speed you overclock by cli ck the Verify button. Or, you can just click
Auto overclock button and let [ WarpSpeeder™ ] automatically gets the best
result for you.

b. “R ecovery Dialog button”: Pop up t he following dialog. Let us er select a restoring
way if sy s tem need to do a f ail-safe reboot.

45

d. “Aut o-ov ercloc k button”: User c an click this button and [ W arpS peeder™ ] will set

the best and stable perform anc e and frequency automatic ally . [ W arpSpeeder™ ]
utility will exe c ute a s e ries of testin g until syst em fail. Then sys t em will do f ail-safe
reboot by us ing Watchdog f unct ion. Aft er reboot, the [ WarpSpeeder™ ] utility will
restore to the hardware default setting or load the verified best and stable
frequency a c cording to the Reco ver y Dialog’s setting.

e. “Verif y but ton”: User can c lick this button and [ WarpSpeeder™ ] will proceed a

testing for current frequenc y. If the testing is ok, then the c urrent frequen cy will be
sav ed into system registry . If the testing f ail, sys tem will do a f ail-safe rebooting.

After reboot, the [ WarpSpeeder™ ] utility will restore to the hardware default
setting or load the verif ied best and stable frequency according to the Recovery

Dialog’ s se tting.

Note: Because th e testing p rog rams, i n voked in A u to-o ve rcl ock and Verify,
include DirectD raw, Direc t3D and Dir ect Show tes ts, the DirectX 8. 1 or newer

runtime library is requi red. And please make sure your di splay card’s color
depth is High color (16 bit) or True color( 24/32 bit ) that is required for

Direct3D rendering.

46

5. H ardware Monit or Panel
Click t he Hardware Monit or button in Main Panel, t he button will be highlight ed and the

Hardware Monitor panel will s lide out to lef t as the f ollowing f igure.
In t his panel, you c an get the real-time stat us inform ation of y our system. The inf ormat ion

will be refreshed ev ery 1 s econd.

6. About Panel
Click the About button in Main Panel, the butt on will be highlighted and t he About Panel

will slide out t o up as the following figure.
In t his panel, you c an get model name and detail inf ormation in hints of all the c hipset t hat

are related to overclocking. You can also get the mainboard’s BIOS model and the
Version number of [ WarpSpeeder™ ] utility.

47

Note: Because the overclock, overvol tage, and hardware monitor features
are controlled by several separate chipset, [ WarpSpeeder™ ] di vi de these
features to separate panels. If one chipset is not on board, the correlative

button in Main panel will be disabled, but will not interfere other panel s’
functions. Thi s property can make [ WarpSpeeder™ ] utili ty more robust.

48

Trouble Shoo ting

e

e

r

y

e

g up

y

p

pp

a

prog

e

r

PROBABLE SOLUTION

No power to the system at all Power light don’t
illuminate, fan inside power supply does not turn
on. Indicator light on keyboard does not turn on

PROBABLE SOLUTION

System inoperative. Keyboard lights are on,
power indicator lights are lit, hard drive is

sp in ning.

System does not boot from hard disk dri ve, can
be booted from CD-ROM drive.

System only boots from CD-ROM. Hard disk can
be read and applications can be used but

booting from hard disk is i mpossible.

PROBABLE SOLUTION

PROBABLE SOLUTION

* Make sure power cable is securely plugged i n
* Repl ac e c abl e
* Contac t techni cal s uppo rt

* Using even pressure on both ends of th

DIM M, press down firmly until the modul
snaps into p l ace.

* Check cable running from disk to dis k controlle

board. Make sure both ends are securel
plugged in; check the drive type in th

standard CMOS setup.

* Backin

important. All hard disks are capable o
breaking down at any time.

* Bac k u

the hard drive. Re-install a
using backup dis ks.

the hard drive is extremel

data and applications files. Reforma

l icat ions and dat

PROBABLE SOLUTION

Screen m essage says “Invalid Configuration” or
“CMOS Failure.”

PROBABLE SOLUTION

Cannot boot s ystem after ins talling second hard
drive.

* Review system’s equipment . Make sure

c or r ect infor m a t io n is in s et u p.

* Set master/slave jum p e rs c o rrectly.
* Run SETUP

types. Call drive manufacturers fo
compatibility wi th other drives.

49

ram and select correct driv

é

e

p

o

o

e

q

n

a

p

e

n

g

a

e

j

p

a

d

Solu ción de Problemas

CAUSA PROBABLE SOLUCIÓN

No hay corriente en el sistema. La luz de
corriente no ilumina, ventilador dentro de la
fuente de alimentación apagada. Indicador de

luz del teclado apagado.

CAUSA PROBABLE SOLUCIÓN

Sistema inoperativo. Luz del teclado encendi do,
luz de i ndic ador de corriente il uminado, disc o
rígido está girando.

CAUSA PROBABLE SOLUCIÓN

Sistema no arranca desde el disco rígido, puede
ser arrancado des de el CD-ROM drive.

CAUSA PROBABLE SOLUCIÓN

Sis tema solamente arranc a desde el CD-ROM.
Disc o rígido puede leer y aplicaciones pueden
ser usados pero el arranque desde el disco

rígido es imposible.

CAUSA PROBABLE SOLUCIÓN

Mensaje de pantalla ”Invalid Configuration” o
“CMOS Failure.”

CAUSA PROBABLE SOLUCIÓN

No puede arrancar después de instalar el
segundo disco rígido.

* Asegúrese que el cabl e de transmi si ón est

* Reemplace el cable.
* Contac te ayuda técnica.

* Pres ione los dos extrem os del DIMM, presion

* Controle el cable de ejecuci ón desde el disc

* Co

* Copie datos y documentos de aplicación

* Revise el equipo del sistema. Asegúrese d

* Fije correctamente el puente master/esclavo.
* E

seguramente enchufado.

ara abajo firmemente hasta que el módul

e ncaje en el lugar.

has ta el disco del controlador. A segúrese d

ue ambos lados estén enchufados co
seguridad; controle el tipo de disco en l
conf igura ción estánd ar C M OS.

iando el disc o rígido es extremadament

importante. Todos los discos rígidos so
capaces de dañarse en cualquier momento.

Vuelva a formatear el disco rí
instalar las aplicaciones y datos usando e

di sco de copiado.

que l a información configurada sea correcta.

ecute el programa SETUP y seleccione e

ti

o de disco correcto. Llame a un

manufacturación del disco para compatibilida
con otros di scos.

ido. V uelva

50

Problemlösung

g

g

e

e

p

r

p

e

g

n

n

e

A

n

d

g

.

d

.

,

n

MÖG LI CHE URSA CHE LÖSUNG

Das System hat keine Spannungsversorgung.
Die Stromanzei
Inneren der Stromversorgung wird nicht
eingeschaltet. Tastaturleuchten sind nic ht an.

Das System funktioniert nicht. Die
Tastaturleuchten sind an, die Stromanzeige

leuchtet, die Festplatte dreht sich.

Das System wird von der Festplatte nicht
hochgefahren, vom CD-ROM-Treiber aber ja.

Das System wird nur von der CD-ROM
hochgefahren. Die Festpl atte wird gelesen und

die Anwendungen sind funktionsfähig, aber es
ist nicht möglic h, das System von der Festplatte
zu starten.

Auf dem Bildschirm erscheint die Meldung
“Ungültige Konfiguration” oder “CMOS Fehler.”

Das System kann nach der Installation einer
zweiten Festplatte nicht hochgefahren werden.

e l euchtet nicht, der Lüfter im

MÖG LI CHE URSA CHE LÖSUNG

MÖG LI CHE URSA CHE LÖSUNG

MÖG LI CHE URSA CHE LÖSUNG

MÖG LI CHE URSA CHE LÖSUNG

MÖG LI CHE URSA CHE LÖSUNG

* Ve r sic h er n S ie si ch , d as s das Str o mk abe l ri ch ti

angebracht ist

* Ers etzen Sie das Stromkabel
* Wenden Sie sich an Ihre Kundendiensts telle

* Drück en Sie das DIMM-Modul bei gleichem

Druck an beide Seiten, bis es einrastet.

* Überprüfen Sie das Kabel zwischen Festplatt

und Festplatten-Controller. Versichern Si
si ch , das s bei de E nden ri c htig angebrach

sind; über
standardmäßigen CMOS-Einrichtung.

* Ein Backu

Festplatten können irgendwann beschädi
werden.

* Machen Sie eine Sicherungskopie von alle

Daten und Anwendungsdateien. Formatiere
Sie die Festplatte und reins talli eren S ie di

nwendungen und Daten mit Hilfe vo

Backup-Disks.

* Überprüfen Sie di e Systemkomponenten un

versichern Sie sich, das diese richti
ei ngerichtet si nd.

* Setzen Sie die Master/Slave-Jumper ric htig ein
* Führen Sie das SETUP-Programm aus un

wählen Sie die richtigen Laufwerktypen
Wenden Sie sic h an den Laufwerkhersteller

um die Kompatibilität mit anderen Laufwerke
zu überprüfen.

rüfen Sie den Laufwerktyp in de

der Fe stplatte ist se h r wichtig. All

51

02/09/2004

52

P4TSV BIOS Setup

BIOS Setup........................................................................................1

1 Main Menu.....................................................................................................3

2 Standard CMOS Features ..............................................................................6

3 Advanced BIOS Features...............................................................................9

4 Advanced Chipset Features..........................................................................13

5 Integrated Peripherals ..................................................................................16

6 Power Management Setup ........................................................................... 21

7 PnP /PCI Configurations...............................................................................25

8 PC Health Status ..........................................................................................27

9 Frequency Control .......................................................................................29

i

P4TSV BIOS Setup

BIOS Setup

Introduction

T his manua l disc ussed Award™ Setup p rogram bu ilt in to the ROM BIOS. T he Setup
program allows users to modify the basic system configuration. This special information is
th en st ored in ba tte ry-b acke d RAM so that it r etain s the Set up info rmatio n when the power
is turned off.

T he Award B IO S™ insta lled in you r com puter system’s RO M (R ead Only Me mory ) is a
custom version of an industry standard BIOS. This means that it supports Intel Pentium

processor input/output system. The BIOS provides crit ical low-level support for standard
devices such as disk drives and serial and parallel ports.

Addin g important has customized the Award BIOS™, but nonstandard, features such as
virus and password protection as well as special support for detailed fine-tuning of the
chipset controlling the entire system.

The rest of this manual is intended to guide you through the process of configuring your
system using Setup.

Plug and Play Support

These AWARD BIOS supports the Plug and Play Version 1.0A specification. ESCD
(Extended System Configuration Data) write is supported.

EPA Green PC Support

This AWARD BIOS supports Version 1.03 of the EP A Green PC specification.

APM Support

These AWARD BIOS supports Vers ion 1.1&1.2 of the Advanced P ower Management
(APM) specif ication. Power management features are implemented via the System

Management Interrupt (SMI). Sleep and Suspend power management modes are supported.
This AWARD BIOS can manage power to the hard disk drives and video monitors.

ACPI Support

Award ACPI BIOS support Version 1.0 of Advanced Conf igurat ion and Power interface
specification (ACPI). It provides ASL code for power management and device
configuration capabilities as defined in the ACPI specification, developed by Microsoft,
Intel and Toshiba.

®

4

1

P4TSV BIOS Setup

PCI Bus Suppo rt

This AW ARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral Component
Interconnect) local bus specification.

DRAM Support

DDR DRAM (Double Data Rate Synchronous DRAM) are supported.

Suppo rted CP Us

This AWARD BIOS supports the Intel Pentium

Us i ng Se t u p

In general, you use the arrow keys to highlight items, press <Enter> to select, use the
<PgUp> and <PgDn> keys to change entries, press <F1> for help and press <Esc> to quit.

The following table provides more detail about how to navigate in the Setup program by
using the keyboard.

Keystroke Function

Up arrow Move to p revio us item
Down arrow Move to next item
Left arro w Move to the item o n the left (men u bar)
Right arrow Move to the item o n the right (menu bar)
Move Enter Move to the item you desired
PgUp key Increase the numeric value or make c hanges
PgDn key Decrease the numeric value or make changes
+ Key Increase the numeric value or make changes

- Key Decrease the numeric value or make changes
Esc key Main Menu – Quit a nd not save c hanges into CMOS

F1 k ey Genera l help o n Se t up navi ga tio n ke ys
F5 key Load previous values from CMOS
F7 key Load the optimized defa ults
F10 key Save all the CMOS changes and exit

®

4 CPU.

Status Page Setup Me nu and Option Page Setup Menu – Exit
Current page and return to Main Menu

2

P4TSV BIOS Setup

1 Main Menu

Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will appear on the
screen. The Main Menu allows you to select from several setup functions. Use the arrow
keys to select among the items and press <Enter> to accept and enter the sub-menu.

0

WARNING

The information about BIOS defaults on this manual (Figure
1,2,3,4,5,6,7,8,9) is just only for reference, please refer to the BIOS

installed on board, for update information.

 Figure 1. Main Menu

Standard CM OS Features

This submenu contains industry standard configurable options.

Advance d BIOS Features

This submenu allows you to configure enhanced features of the BIOS.

Advanced Chipset Features

This submenu allows you to configure special chipset features.

3

P4TSV BIOS Setup

Integrated Pe ripherals

This submenu allows you to configure certain IDE hard drive options and Programmed
Input/ Output features.

Power Management Setup

This submenu allows you to configure the power management features.

PnP/PCI Configurations

This submenu allows you to configure certain “Plug and Play” and PCI options.

PC Health Status

This submenu allows you to monitor the hardware of your system.

Fre que ncy Contro l

This submenu allows you to change CPU Vcore Vo lta ge and CP U/PCI clock. (Howe ver,
this function is strongly recommended not to use. Not properly change the voltage

and clock may cause CPU o r M/B damage!)

Lo a d Op ti mize d De fa ul ts

This selection allows you to reload the BIOS when the system is having problems
particularly w ith the boot sequence. These configurations are factory settings optim ized

for this system. A confirmation message will be displayed before defaults are set.

Set Supervisor Password

Setting the supervisor password will prohibit everyone except the supervisor from making
changes using the CMOS Setup Utility. You will be prompted with to enter a password.

Set User Password

If the Supervisor P assword is not set, then the User Password will function in the same way
as the Supe rvisor P asswor d. If th e Supervis or Pas swor d is set and the User Pa ssword is
set, the “User” will only be able to view configurations but will not be able to change them.

4

P4TSV BIOS Setup

Save & Exit Setup

Save all configuration changes to CMOS(memory) and exit setup. Confirmation message
will be displayed before proceeding.

Exit Without Saving

Abandon all changes made dur ing the current session and exit setup. Confirmation message
will be displayed before proceedin g.

Upgrade BIOS

This submenu allows you to upgrade bios.

5

P4TSV BIOS Setup

2 Standard CMOS Features

The items in Standard CMOS Setup Menu are divided into 10 categories. Each category
includes no, one or more than one setup items. Use the arrow keys to highlight the item and
then use the<PgUp> or <PgDn> keys to select the value you want in each item.

Figure 2. Standard CM OS Setup



6

P4TSV BIOS Setup

Main Menu Selec tions

This table shows the selections that you can make on the Main Menu.

Item Options Description

Date mm : dd : yy Set the system date. Note

Time hh : mm : ss Set the system internal

IDE Primary Master Options are in its sub

menu.

IDE Primary Slave Options are in its sub

menu.

IDE Secondary Master Options are in its sub

menu.

IDE Secondary Slave Options are in its sub

menu.

Drive A

Drive B

Video EGA/VGA

360K, 5.25 in

1.2M, 5.25 in

720K, 3.5 in

1.44M, 3.5 in

2.88M, 3.5 in

None

CGA 40

CGA 80

MONO

that the ‘Day’ automatically
changes when you set the
date.

clock.

Press <Enter> to enter the
sub menu of detailed
options

Press <Enter> to enter the
sub menu of detailed
options.

Press <Enter> to enter the
sub menu of detailed

options.

Press <Enter> to enter the
sub menu of detailed
options.

Selec t the type of floppy
disk drive installed in your
system.

Select the default video
device.

7

P4TSV BIOS Setup

Item Options Description

Halt On All Errors

No Errors

All, but Keyboard

All, but Diskette

All, but Disk/ Key

Base Memory N/A Displays the amount of

Extended Memory N/A Displays the amount of

Total Memory N/A Displays the total memory

Select the situation in which

you want th e BIOS to st op

the POST process and

notify you.

conventional memory

detected during boot up.

extended memory detected

during boot up.

available in the system.

8

P4TSV BIOS Setup

3 Advanced BIOS Features

 Fig ure 3. Adva nce d BIOS Setup

Boot Seq & Floppy Setup

First/ Second/ Third/ Boo t Other Device

These BIOS attempt to load the operating system from the device in the sequence
selected in these items.

The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3,
ZIP100, LAN, HPT370, Disabled, Enabled.

Swap Floppy Drive

For systems with two floppy drives, this option allows you to swap logical drive
assignments.

The Choices: Disabled (default), Enabled.

Boot Up Floppy Seek

Enabling th is option will test the floppy drives to determine if they have 40 or 80
tracks. Disablin g this option reduces the time it takes to boot-up.

The Choices: Disabled, En abled (default) .

Report NO FDD for Win95
The Choices: NO(default).

9

P4TSV BIOS Setup

Cache Setup

CPU L1&L2 Cache

Depending on the CPU/chipset in use, you may be able to increase memory
access time with this option.
Enabled (default) Enable cache.
Disab led Disable cache.

CPU Feature

Virus Warning

T his op tion allows yo u to choo se the Viru s Warnin g feature t hat is used to prote ct the I DE
Hard Disk boot sector. If this function is enabled and an attempt is made to write to the
boot sector, BIOS will display a warning message on the screen and sound an alarm beep.

CPU Hyper-T hrea ding Technology

This option allows you to enable or disabled CPU Hyper-Threading. Enabled for
Windows XP and Linux 2.4.x (OS optimized for Hyper Threading Technology. Disabled

for other OS (OS not optimized for Hyper Threading Technology.

Quick Power On Self Test

Enabling this option will cause an abridged version of the Power On Self-Test (POST) to
execute after you power up the computer.

Thermal Management
Allows you to choose the thermal management of your monitor.

The Choices: Thermal Monitor 1 (default), T hermal Monitor2.

TM2 B us Ra tio

Represents the frequency. Bus ratio of the throttled performance state that will
be initiated when the on-die sensor gose from not hot to hot.

The Choices: 0X (default).

TM2 B us VID

Represents the voltage of the throttled performance state that will be initiated
when the on-die sensor gose from not hot to hot.

The Choices: 0.8375 (default).

Limit CPU ID Max Val

Set limit CP U ID maximun vale to 3, it should be disabled for WinXP.
The Choices: Disabled (default), Enabled.

Enabled Virus protection is activated.

Disabled (default) Virus protection is disabled.

The Choices: Enabled (Default), Disabled.

Disabled Normal POST.
Enabled (default) Enable quick P OST.

10

P4TSV BIOS Setup

Boot Up NumLock Status

Selects the NumLock. State after power on.

On (default) Numpad is number keys.

Off Numpad is arrow keys.

Gate A20 Option

Select if chipset or keyboard controller should control Gate A20.

Normal A pin in the keyboard controller

controls Gate A20.

Fast (d efau lt) Lets chips et con trol Ga te A20.

Typematic Rate Setting

When a key is held down, the keystroke will repeat at a rate determined by the keyboard
controller. When enabled, the typematic rate and typematic delay can be configured.

The Choices: Disabled (default), Enabled.

Typematic Rate (Chars/Sec)

Sets the rate at which a keystroke is repeated when you hold the key down.

The Choices: 6 (default), 8,10,12,15,20,24,30.

Typematic Delay (Msec)

Sets the delay time after the key is held down before it begins to repeat the keystroke.

The Choices: 250 (default), 500, 750, 1000.

Securi ty Optio n

This option will enable only individuals w ith passwords to br ing the system online and/or
to use the CMOS Setup Utility.

System A password is required for the system to boot and is

Setup (default) A password is required to access the Setup Utility

This will only apply if passwords are set from the Setup main menu.

APIC Mode

Selecting Enabled enab les ACP I device mode reporting from the BIOS to the operating
system.
The Choices: Enabled (default), Disabled.

MPS Vers ion Co ntrol For OS

The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specificat ion.
Select version supported by the operation system running on this computer.
The Choices: 1.4 (default), 1.1.

also required to access the Setup Utility.

only.

11

P4TSV BIOS Setup

OS Select For DRAM > 64MB

A choice other than Non-OS2 is only used for OS2 systems with memory exceeding 64MB.

The Choices: Non-OS2 (default), OS2.

Summary Screen Show

This item allows you to enable/disable the summary screen. Summary screen means
system con figurat ion an d P C I device listin g.

The choices: Ena bled , Disabled (default).

12

P4TSV BIOS Setup

4 Advanced Chipset Features

This submenu allows you to configure the specific features of the chipset installed on your
system. This chipset manage bus speeds and access to system memory resources, such as
DRAM. It also coordinates communications with the P CI bus. The default settings that came
with your system have been optimized and therefore should not be changed unless you are
suspicious that the settings have been changed incorrectly.



Fig ure 4. Adva nce d Chipse t Setup

DRAM Timing Selectable

When synchronous DRAM is installed, the number of clock cycles of CAS latency depends
on the DRAM tim ing.

The Choice s: B y SP D (default), Manual.

CAS Latency Time

When synchronous DRAM is installed, the number of clock cycles of CAS latency depends
on the DRAM tim ing.

The Choices: 1.5, 2(default), 2.5, 3.

Active to Precharge Delay

This item controls the number of DRAM clocks to activate the precharge delay.
The Choices: 8 (default), 7, 6, 5.

13

P4TSV BIOS Setup

DRAM RAS# to CAS# Delay

This field let you insert a timing delay between the CAS and RAS strobe signals, used
when DRAM is written to, read from, or refreshed. Fast gives faster performance; and slow
gives more stable performance. This field applies only when synchronous DRAM is
ins ta lled in th e s ystem .
The Choices: 4 (default), 3, 2.

DRAM RAS# Precharge

If an insufficient number of cycle is allowed for RAS to accumulate its charge before
DRAM refresh, the refresh may be incomplete, and the DRAM may fail to retain data. Fast
gives faster performance; and Slow gives more stable performance. This field app lies only
when synchronous DRAM is installed in the system.
The Choices: 4 (default), 3, 2.

Memory Fre quency For

This item allows you to select the Memory Frequency.
The Choices: Auto (default), DDR266, DDR300, DDR400.

System BIOS Cacheable

Selecting Enabled allows you caching of the system BIOS ROM at F0000h~FFFFFh,
resulting a better system performance. However, if any program writes to this memory area,
a system error may result.
The Choices: Enabled (default), Disabled.

Video BIOS Cacheable

Se lect E nabled a llow s cach ing of the video BIOS , resulting a be tte r sys tem perform ance.
However, if any program writes to this memory area, a system error may result.
The Choices: Disabled, Ena ble d (de fault).

Memory Hole At 15M-16M

You can reserve this area of system memory for ISA adapter ROM. When this area is
reserved it cannot be cached. The user information of peripherals that need to use this area
of system memory usually2 discussed their memory requirements.

Delay Prior to Thermal

Set this item to enable the CPU Thermal function to engage after the specified time.

AGP Ape rture Size (MB)

Select the size of the Accelerated Graphics Port (AGP) aperture. The aperture is a portion
of the PCI memory address range dedicated for graphics memory address space. Host

The Cho ices: Disabled (default), Enabled.

The Cho ices: 4, 8, 16 (default), 32.

14

P4TSV BIOS Setup

cycles that hit the aperture range are forwarded to the AGP without any translation.
The Cho ice s: 64, 4, 8, 16, 32, 128(default), 256.

Init Display First

This item allows you to decide to active whether PCI Slot or on-chip VGA first.

The Cho ices: Onboard/ AGP (default), PCI Slot.

On-Chip VGA

This item allows you to enabled or disabled on-chip VGA.
The Cho ices: Enabled (default), Disabled.

On-Chip F rame B uffe r Si ze

This item allows you to choose the on-chip frame buffer size.

The Cho ices: 16MB (default), 8MB, 1MB.

Boot Display

This item allows you to choose the display booting.
The Choices: Auto (default), CRT, TV, EFP.

15

P4TSV BIOS Setup

5 Integrated Peripherals

 Figure 5. Integrated Peripherals

Onboa rd IDE De vice

Press Enter to configure the onboard IDE Controllers.

IDE HDD Block Mode

Bloc k m ode is also calle d block t rans fer, m ultip le command s, or multip le se ctor
read / write. If your IDE hard drive supports block mode (most new drives do),
select Enabled for automatic detection of the optimal number of block mode
(most new drives do), select Enabled for automatic detection of the optimal
number of block read / write per sector where the drive can support.

The Cho ices: Enabled (default), Disabled.

IDE DMA Transfer Access

This item allows you to enable or disable the IDE transfer access.

The Choices: Enabled (default), Disabled.

On-Chip Primary / Secondary PCI IDE

This item allows you to enable or disable the primary/ secondary IDE Channel.

The Cho ices: Enabled (Default), Disabled.

Prima ry / Secondary /Master / Slave PIO

The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4) for
each of the IDE devices that the onboard IDE interface supports. Modes 0 to 4

16

P4TSV BIOS Setup

will increased performance progress ively. In Auto mode, the system
automatically determines the best mode for each device.

The Choices: Auto (default), Mode0, Mode1, Mode2, Mode3, Mode4.

Prima ry / Secondary /Master / Slave UDMA

Ultra DMA/100 functionality can be implemented if it is supported by the IDE
hard drives in your system. As well, your operating environment requires a DMA

driver (Windows 95 OSR2 or a third party IDE bus master driver). If your hard
drive and your system software both support Ultra DMA/100, select Auto to
enable BIOS support.

The Choices: Auto (default), Disabled.

On-Chip Serial SATA

This item allows you to choose:
Disabled: disabled SAT A Controller.

Auto: auto arrange by BIOS.
Combined Mode: PATA and SATA are combined max of 2 IDE drivers in each
channel.
Enhanced Mode: enabled both SAT A and PATA max of 6 IDE drivers are
supported.

SATA Only : SAT A is ope rat ing in legacy m od e.
The Choices: Default (default), Auto, Combined Mode, Enhanced Mode, SATA
only.

Se ria l AT A Po r t0 Mo de

The Cho ices: Primary Master (defau lt).

Se ria l AT A Po r t1 Mo de

The Cho ices: Primary Master (defau lt).

Onboa rd De vice

Press Enter to configure the onboard Device.

USB Controller

Select Enabled if your system contains a Universal Serial Bus (USB) controller
and you have USB peripherals.

The Cho ices: Enabled (default), Disabled

USB 2.0 Controller

Th is entry is to ena bled/ dis abled EH CI co ntroller only. Th is BIO S its elf may/
may not have high speed USB support. If the BIOS has high speed USB support
built in, the support will automatically turn on, when high speed device were
attached.

The Cho ices: enabled(default).

17

P4TSV BIOS Setup

USB Keyboard Suppo rt

This item allows you to enable or disable the USB Keyboard Legacy Support.

Enabled Enable USB Keyboard Support.

Disabled (default) Disable USB Keyboard Support.

USB Mo us e S u ppo r t

This item allows you to enable or disable the USB Mouse Legacy Support.

Enabled Enable USB Mouse Support.

Disabled (default) Disable USB Mouse Support.

AC97 Audio/ Modem

This item allows you to decide to enable/ disable to support AC97 Audio/Modem.

The Choices: Auto (default), Disabled.

Onboard PCI LAN

This item allows you to enable or disable the Onboard PCI LAN.

The Choices: Auto (default), Disabled.

Onboard LAN Boot ROM

This item allows you to enable or disable the Onboard LAN Boot ROM.

The Cho ices: Enabled (default), Disabled.

Super IO Device

Press Enter to configure the Super I/O Device.

Power On Function

This item allows you to choose the power on function.

The Choices: Button (default), Password, Hot Key, Mouse Left, Mouse Right,

Any Key, Keyboard 98.

KB Po wer o n Pos swo rd

Input password and press Enter to set the Keyboard power on password .

HOT Key power ON

Input password and press Enter to set the Keyboard power on password .

The Choices: Ctrl-F1(default) , Ctrl-F2 , Ctrl-F3 , Ctrl-F4 , Ctrl-F5,
Ctrl-F6 , Ctrl-F7 , Ctrl-F8 , Ctrl-F9, Ctrl-F10 , Ctrl-F11 , Ctrl-F12 .

O n bo a rd F D C Co nt ro lle r

Select Enabled if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If install and FDC or the system has no

floppy drive, select Disab led in this field.

The Cho ices: Enabled (default), Disabled.

Onboard Serial Port 1

Select an address and corresponding interrupt for the first and second serial ports.

18

P4TSV BIOS Setup

The Cho ices: 3F8/IRQ4 (default), Disabled, Auto, 2F8/IRQ3,

3E8/IRQ4, 2E8/IRQ3.

Onboard Serial Port 2

Select an address and corresponding interrupt for the first and second serial ports

The Choices: 2F8/IRQ3, Disabled (default), Auto, 3F8/IRQ4, 3E8/IRQ4,

2E8/IRQ3.

UART Mode Select

This item allows you to determine which Infrared (IR) function of onboard I/O

chip.

The Cho ices: Normal, ASKIR, IrDA (default), SCR .

UR2 Duplex Mo de

Select the value required by the IR device connected to the IR port. Full-duplex

mode permits simu ltaneous two-direction transmission. Half-duplex mode

permits transmission in one direction only at a time.

The Choices: Hal f (defau lt), F ull.

The Choices: 3 (default), 1.

Onboard Parallel Port

This item allows you to determine access onboard parallel port controller with

which I/O Address.

The Cho ices: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.

Parallel Po rt Mode

T he default value is SP P.

SPP (default) Using Parallel port as Standard Printer Port.
EPP Using Parallel port as Enhanced Parallel Port.
EC P Usin g P a ralle l port as Exten ded C apabi litie s Po rt.
EC P+EPP Usin g Pa ralle l port as ECP & EPP mode.

ECP Mode Use DMA

Se lect a DM A Ch annel for th e por t.

Po wer After Po we r Fail

T his se tting s pecifies whe ther your sy ste m will r eboo t after a power fa il or

interrupts occurs.
Off Leaves the computer in the power off state.

On Reboots the computer.

Former-Sts Restores the system to the status before power failure or

interrupt occurs.

The Choices: Off (default), On, Former-Sts.

Game Port Address

Game P ort I/O Address.

The Cho ices: 201 (default), 209, Disabled.

19

P4TSV BIOS Setup

Midi Port Address

Midi Port Base I/O Address.

The Cho ices: 330 (default), 300, Disabled.

Midi Port IRQ

T his de term in es th e IRQ in w hich the Midi Port can use.

The Choices: 10 (default), 5.

20

P4TSV BIOS Setup

6 Power Management Setup

The Power Management Setup Menu allows you to configure your system to utilize energy
conservation and power up/power down features.

Figure 6. Power Manageme nt Setup



ACPI Function

This item displays the status of the Advanced Configuration and Power Management
(ACPI).

The Choices: Enabled (default), Disabled.

ACP I Sus pe nd Ty pe

The item allows you to select the suspend type under the ACPI operating system.

The Choices: S1 (POS) (default) Power on Suspend

S3 (STR) Suspend to RAM
S1 & S3 POS+STR

Run VGABIOS if S3 Resume

Choosing Ena bled wi ll make BIO S run VGA BIOS to initialize the VGA card whe n system
wakes up from S3 state. The system time is shortened if you disab le the function, but

system w ill need AGP drive r to in itia lize the card. So, if the AGP driver of the VGA card
does not support the initialization feature, the display may work abnorma lly or not function
after S3 .

The Choices: Auto (default), Yes, No.

21

P4TSV BIOS Setup

Power Management

This category allows you to select the type (or degree) of power saving and is directly
related to the followin g modes:

1.HDD Power Down.

2.Doze Mode.

3. Susp end M ode.

There are four options of Power Management, three of which have fixed mode settings

Min. Saving

Minimum power management.
Doze Mode = 1 hr.

Standby Mode = 1 hr
Su spend Mode = 1 hr.
HDD Power Down = 15 min

Max Saving

Maximum power management only available for sl CPU’s.
Doze Mode = 1 min
Standby Mode = 1 min.
Su spend Mode = 1 min.
HDD Power Down = 1 min.

User Defined

Allows you to set each mode individually.
When not disabled, each of the ranges are from 1 min. to 1 hr. except for HDD
Power Down which ranges from 1 min. to 15 min. and disable.

Video Off Method

T his op tion de term ines the mann er in whic h the mo nitor is goes blank.

(default)

V/H SYNC+Blank

This selection w ill cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.

Blank Screen

This option only writes blanks to the video buffer.

DPMS (def ault)

Initia l disp lay p ower mana gement signa lin g.

22

P4TSV BIOS Setup

Video Off In Suspend

This determines the manner in which the monitor is blanked.
The Choices: Yes (default), No.

Suspe nd Type

Select the Suspend Type.

The Choices: Stop Grant (default), PwrOn Suspend.

MODEM Use IRQ

This determines the IRQ, which can be applied in MODEM use.

Suspe nd Mode

When enabled and after the set time of system inactivity, all devices except the CPU will be
shut off.

HDD Power Down

When enabled and after the set time of system inactivity, the hard disk drive will be
powered down while all other devices remain active.

Soft-Off by PWR-BTTN

Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has “hung.”

Intruder# Detection

This item allows you to enable or disable intruder# detection.

Wake-Up by PCI card

Power On by Ring

The Choices:3 (d efault)/ 4 / 5 / 7 / 9 / 10 / 11 / NA.

The Choices: Disabled (defau lt), 1Min, 2M in, 4Min, 8M in, 1 2Min, 20M in,

30Min, 40Min, 1Hour.

The Choices: Disabled (d efau lt), 1M in, 2 Min, 3Min, 4M in, 5 Min, 6Min, 7Min,

8Min, 9Min, 10Min, 11Min, 12Min, 13Min, 14Min, 15Min.

.

The Choices: Delay 4 Sec, Instant-Off (default).

The Choices: Disabled (Default), Enabled.

When you select Enable, a PME signal from PCI card returns the system to Full

On state.

The Cho ices: Ena bled, Disabled (default).

An input signal on the serial Ring Indicator (RI) line (in other words, an

23

P4TSV BIOS Setup

incomin g call on the modem) awakens the system from a soft off state.

The Choices: Enabled, Disa bled (default).

USB KB Wake-Up From S3

This item allows you to enable or disabled USB keyboard wake up from S3.

The Choices: Disabled (Default), Enabled.

Resume by Alarm

T his function is for setting date and time for your computer to boot up. During

Disab led, you cannot use this function. During Enabled, Choose the Date and

Time.
Alarm: Date (of Month) Alarm You can choose which month the system will
boot up.
Time (hh:mm:ss) Alarm You can choose shat hour, minute and second the
system will boot up.

Note: If you have change the setting, you must let the system boot
up until it go es to the operating system, before this function will
work.

24

P4TSV BIOS Setup

7 PnP/PCI Configurations

This section describes configuring the PCI bus system. PCI, or Personal Computer
Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of
the CPU itself uses when commun icating with its own special components. This section
covers some very technical items and it is strongly recommended that only experienced
users should make any changes to the default settin gs.

Figure 7. P nP/PCI Configurations



Reset Configuration Da ta

The system BIOS supports the PnP feature which requires the system to record which
resources are assigned and protects resources from conflict. Every peripheral device has a
node, which is called ESCD. This node records which resources are assigned to it. The
system nee ds to record and u pdate ES CD to the mem ory lo cations. These locat ions (4K)
are reserved in the system BIOS. If the Disabled (default) option is chosen, the system‘s
ESCD will update only when the new configuration varies from the last one. If the Enabled
option is chosen, the system is forced to update ESCDs and then is automatically set to the
“D isab led” mode.

The above settings will be shown on the screen only if “Manual” is chosen for the resources
controlled by function.

Le gacy is the term, which s ignifies that a resource is as signed to the ISA Bus an d prov ides
non-PnP ISA add-on cards. PCI / ISA PnP signifies that a resource is assigned to the PCI
Bus or provides for ISA PnP add-on cards and peripherals.

The Choices: Disabled (default), Enabled.

25

P4TSV BIOS Setup

Resources Controlled By

By Choosing “Auto(ESCD)” (default), the system BIOS will detect the system resources
and automatically assign the relative IRQ and DMA channel for each peripheral.By
Choosing “Manual”, the user will need to assign IRQ & DMA for add-on cards. Be sure
that there are no IRQ/DMA and I/O port conflicts.

IRQ Resources

This submenu will allow you to assign each system interrupt a type, depending on the type
of device using the interrupt. When you press the “Press Enter” tag, you will be directed to
a submenu that will allow you to configure the system interrupts. This is only

configurable when “Resources Controlled By” is set to “Manual”.

IRQ-3 assigned to PCI Device
IRQ-4 assigned to PCI Device
IRQ-5 assigned to PCI Device
IRQ-7 assigned to PCI Device
IRQ-9 assigned to PCI Device
IRQ-10 assigned to PCI Device
IRQ-11 assigned to PCI Device
IRQ-12 assigned to PCI Device
IRQ-14 assigned to PCI Device
IRQ-15 assigned to PCI Device

PCI / VG A Pa lette Sn oop

Choose Disabled or Enabled. Some graphic contro llers which are not VGA compatible
take the output from a VGA controller and map it to their display as a way to provide boot

information and VGA compatibility.

However, the color information comin g from the VGA co ntro l ler is draw n from the palette
table inside the VGA controller to generate the proper colors, and the graphic controller
needs to know what is in the palette of th e VGA contro ller. T o do this, the non-VGA

graphic controller watch for the Write access to the VGA palette and registers the snoop
data. In PCI based systems, where the VGA controller is on the PCI bus and a non-VGA

graphic controller is on an IS A bus, the Write Access to the palette will not show up on the
ISA bus if the PCI VGA controller responds to the Write.

In this case, the PCI VGA controller shou ld not respond to the Write, it should only sno op
the data and permit the access to be forwarded to the ISA bus. The non-VGA ISA graphic
controller can then snoop the data on the ISA bus. Unless you have the above situation,
you should disable this option.

Disabled(default) Disable the function.
Enabled Enable the function.

26

P4TSV BIOS Setup

8 PC Health Status

 Figure 8. PC Health Status

Shutdo wn Temperature

This item allows you to set up the CPU shutdown Temperature. T his item is only effective
under Windows 98 ACPI mode.

The Choices: 60°C/140°C, 65°C/149°F, Disabled (default).

CPU F AN Contro l by

The Choice “smart” can make your CP U FAN to reduce noise.

The Choices: Always On (default), smart.

SYS FAN Co ntrol by

The Choice “smart” can make your System FAN to reduce noice.

The Ch o i ces : Alwa ys O n (default), smart.

CPU Vco re / AGP Voltag e / +3.3 V/ +5. 0V/ +12 V/ -12 V/ -5 V/ 5V(SB) / Volta ge

Battery

Detect the system’s voltage status automatically.

27

P4TSV BIOS Setup

Current CPU Temp

Show you the current CPU temperature.

Current CPU FAN Speed

This field displays the current CP UFAN speed.

Curre nt SYS FAN Speed

This field displays the current speed SYSTEM fan.

Show H/W Monitor in POST

If you computer contain a monitoring system, it will show PC health status during POST
stage. The item offers several delay time to select you want.

The Choices: Enabled (default), Disabled.

28

P4TSV BIOS Setup

9 Frequency Control

 Fig ure 9. Freque nc y Co ntrol

CPU Clock Ratio

CPU Voltage

T his ite m allows you to select CP U Vo ltage Regulat or.

DIMM Voltage

This item allows you to select DDR Voltage Regulator.

Auto Detect PCI Clk

This item allows you to enable / disable auto Detect PCI Clock.

Spread Spectrum

This item allows you to enable / disable spectrum for all clock.
The Choices: Enabled (default), Disabled.

The Cho ices: 8 X(default), 9X, 10X, 11X, 12X, 13X, 14 X, 15X, 16X, 17X, 18X,
19X, 20 X, 21 X, 22 X, 23 X.

The Cho ices: Default (default), +8.1％, +5.5％, +2.5％.

The Cho ices: 2.5V (Default), 2.6V, 2.7V, 2.8V.

The Cho ices: Enabled (default), Disabled.

29

P4TSV BIOS Setup

CPU Clock

This item allows you to select CPU Clock, and CPU over clocking.

If unfortunately, the system’s frequency that you are selected is
not functioning, there are two methods of booting-up the system.
Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed))

as “ON” status. All the CMOS data will be loaded as

Method 2: Press the <Insert> key and Power button simultaneously,

※ It’s strongly recommended to set CPU Vcore and clock in

default setting. If the CPU Vcore and clock are not in default
setting, it may cause CPU or M/B damage.

def aults set tin g.

after that keep-on pressing the <Insert> key until the
power-on screen showed. This action will boot-up the
system according to FSB of the processor.

30