Bertazzoni KOTR30XT Specifications

BERTAZZONI PROFESSIONAL SERIES

30” VENTILATION CONVECTION MICROWAVE OVEN
KOTR30XT

HIGHLIGHTS

• 1.5 cu ft microwave designed to be located above
the cooktop or range, combining a high powered
microwave oven with an integrated, multi stage range
hood function.

• Styled to match with Bertazzoni Professional and
Master Series products, it is finished in stainless steel
with a black glass door.

• The oven has ten power levels and controls that
include pre-set functions, cooking timer and sensor
controls for reheating and defrosting.

FEATURES

Design stainless steel front and black glass window
Power levels 10
Microwave Output power 900 W
Convection Cooking yes
Convection Power 1450 W
Convection cooking menu yes
Oven volume 1.5 cu ft
Turntable Ø 13.6”
Cavity finishing stainless steel
Sensor reheat, defrost yes
Timer
Max Extraction Power 300 CFM
Speed 2, high level 300CFM - low level 190CFM
Lights 3 lights, one in the cavity – two on the base plate

TECHNICAL SPECIFICATIONS

Voltage, frequency 120 V 60 Hz
Max Amp usage, power rating 10 A - 1450 W
Plug included
Certification UL
Warranty 2 years parts and labor

Includes kit for recirculation mode

3

yes

TO COOK BEAUTIFULLY

WWW.BERTAZZONI.COM

INSTALLATION INSTRUCTIONS

be 30” or more from

150 lbs to allow proper top vent air exhaust

8

14''

/

KOTR30XT

30''

15'' /

1

2

max 12'' /

7

8

3

4

1

16'' /

bottom edge of

29'' /

13

16

13" max

cabinet needs to

the cooking surface

3O" min

1

16"

⁄2

30"

2"

Backsplash

66"

or more from
the floor to
the top of the
microwave

Bertazzoni recommends to operate the appliance after it has been
installed in a cabinet. The kitchen cabinets shall be made of materials
capable of withstanding temperatures at least 117°F (65°C) above
room temperature in order to avoid possible damage to the cabinets
during oven usage. For further installation instructions refer to the
installation manual.

If the cabinet depth including the cabinet doors
is more than 13” then the unit must be spaced
out from wall using adequate materials supporting

Disclaimer: while every effort has been made to insure the accuracy of the information contained in
this brochure, Fratelli Bertazzoni reserves the right to change any part of the information at any time
without notice.

Fratelli Bertazzoni, Bertazzoni and the winged wheel brand icon are registered trademarks of
Bertazzoni Spa.

WWW.BERTAZZONI.COM