3300/05 Rack
Description
The 3300/05 rack is a durable, easy to access, expandable mounting medium for the 3300 Monitoring System. It accommodates a Power Supply, System Monitor, and various types of 3300 Monitors. Each monitor position in the rack includes a Signal Input/Relay Module position at the rear of the rack. The rack mainframe is manufactured in sections from an injection molded plastic; a conductive antistatic material dissipates electrostatic discharge.
The rack bezel allows you to individually identify machine/monitor points or loop numbers by using the factory engraved bezel tags or clear plastic strips over paper tags. The 3300 modular design eliminates the need for internal rack wiring and allows easy expansion to meet your increased monitoring requirements.
The left-most position (position 1) of the rack is designated for the Power Supply. The position next to the Power Supply (position 2) is reserved for the System Monitor. The other rack positions (3 through 14) are available for any combination of individual monitors.
Specifications and Ordering Information
Part Number 141492-01
Rev. F (04/07)
Page 1 of 4
Hazardous Area Approvals
CSA/NRTL/C
Approval Option (01)
Class I, Div 2
Groups A, B, C, D
T4 @ Ta max 65 °C
Certification
Number
150368 - 1002151 (LR 26744)
ATEX
Approval Option (02)
For Selected Ordering Options with ATEX/CSA agency approvals:
II G
EEx nC[L] IIC
T4 @ Ta = -20°C to +60°C
Certification
Number
BN26744C-55A
Ordering Information
Rack
3300/05-AXX-BXX-CXX
Option Descriptions
A: Rack Size Option
(SDI/DDI Compatible)
2 1 4-position
2 2 6-position
2 3 8-position
2 4 10-position
2 5 12-position
2 6 14-position
2 7 8-position 19-inch EIA mounting
3 1 4-position with internal barrier bar
3 2 6-position with internal barrier bar
3 3 8-position with internal barrier bar
3 4 10-position with internal barrier bar
3 5 12-position with internal barrier bar
3 6 14-position with internal barrier bar
3 7 8-positon 19-inch EIA mounting with internal barrier bar
B:Agency Approval Option
0 0 Not Required
0 1 CSA/NRTL/C
0 2 ATEX self certification
Note: ATEX approval requires the monitor rack be installed in a weatherproof housing.
C:Mounting Option
0 0 Standard
0 1 Used in Weatherproof housing or for 19-inch EIA rack mounting.
Note: Weatherproof housing option provides EIA type mounting holes on rack front panel.
Accessories:
101703-01
Blank Kit
Specifications and Ordering Information
Part Number 141492-01
Rev. F (04/07)
Page 2 of 4
Loading...