BELDEN 49911A Technical Data

49911A Molded Cable Assemblies - D-Subminiature Assembly

3

For more information please

call

1-800-Belden1

See Put-ups and Colors

Description:

9-position shielded D-Sub retractile, for keyboard-to-CRT use where 9-pin retractile is desired, male straight handle one end, polypropylene
insulation, polyurethane jacket.

PHYSICAL CHARACTERISTICS:
CONDUCTOR:

Number of Conductors 9
Total Number of Conductors 9
Number of Pins 9
AWG 26
Stranding 19x38
Conductor Diameter .021 in.
Conductor Material TC - Tinned Copper

INSULATION:

Insulation Material PP - Polypropylene
Nom. Insulation Wall Thickness 0.006 in.

OUTER SHIELD:

Outer Shield Trade Name Beldfoil®
Outer Shield Type Tape
Outer Shield Material Aluminum Foil-Polyester Tape
Outer Shield %Coverage 100 %

OUTER SHIELD DRAIN WIRE :

Outer Shield Drain Wire AWG 20
Outer Shield Drain Wire Stranding 42x36
Outer Shield Drain Wire Conductor Material TC - Tinned Copper

OUTER JACKET:

Outer Jacket Material PUR - Polyurethane
Outer Jacket Nominal Wall Thickness 0.065 in.

OVERALL NOMINAL DIAMETER:

Overall Nominal Diameter .250 in.

ASSEMBLY DIMENSIONAL CHARACTERISTICS:

Page 1 of

49911A Molded Cable Assemblies - D-Subminiature Assembly

3

Assembly Dimensional for Retractile Coil Body
Length (relaxed)

Assembly Dimensional For Retractile Coil Body
Length (extended)

1st End Tail Length 6 +/-2 in.
2nd End Tail Length 18 +/- 1.5 in.

CONNECTOR CHARACTERISTICS:

FIRST END :

Connector Characteristics - First End Connector Type D-Sub
Connector Characteristics - First End # of Connector

Contacts/positions
Connector Characteristics - First End Connector

Gender
Connector Characteristics - First End Connector

Shielding Type
Connector Characteristics - First End Overmold Type 9 Position D-Sub
Connector Characteristics - First End Overmold

Compound Material
Connector Characteristics - First End Overmold Color Black
Connector Characteristics - First End Retention

Hardware

SECOND END :

Connector Characteristics - Second End Connector
Type

18 +/- 1 in.

90 in.

9

Male

Metal Backshell

PVC

Thumbscrew

No Connector

NOT TERMINATED :

Connector Characteristics (not Terminated) Jacket
Removal Dimension

Connector Characteristic (not terminated) Drain Wire
Solder Dip

WIRING DIAGRAM:

Wiring Diagram Color Code Chart :

Number Color

1 Brown
2 Red
3 Orange
4 Yellow
5 Green
6 Blue
7 Purple
8 Gray
9 White

MECHANICAL CHARACTERISTICS:

UL Temperature Rating 60°C (UL AWM Style 20197)

1 +/-.125 in.

.25 +/- .125 in.

Page 2 of