Dishwasher
Instruction Manual DIS28020
Please read this user manual first!
Dear Customer,
We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure.
Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use. In case of transferring the product to someone else, give the manual as well.
The user manual will help you use your product in a fast and safe way.
•Read the user manual before installing and starting your product.
•Always follow the safety instructions.
•Keep this user manual within easy reach for future reference.
•Read also the other documents supplied with the product.
Remember that this user manual is also applicable for several other models. Differences between models will be identified in the manual.
Explanation of symbols
Throughout this User Manual the following symbols are used:
Important information or useful hints about usage
Warning for hazardous situations with regard to life and property
Warning for electric shock
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
This product was manufactured using the latest technology in environmentally friendly conditions.
1. Dishwasher |
3 |
|
5. Operating the product |
23 |
Technical specifications |
4 |
|
Keys |
24 |
2. Important safety |
|
|
Preparing the machine |
24 |
|
|
Programme selection |
24 |
|
instructions |
5 |
|
||
|
Auxiliary functions |
26 |
||
General safety |
5 |
|
||
|
Scheduling the washing time |
27 |
||
Intended use |
6 |
|
||
|
Starting the programme |
28 |
||
Children’s safety |
6 |
|
||
|
Cancelling the programme |
28 |
||
|
|
|
||
3. Installation |
7 |
|
Salt indicator ( ) |
28 |
|
|
|
Rinse Aid indicator ( ) |
28 |
Appropriate installation location |
7 |
|||
Connecting water supply |
7 |
|
End of programme |
28 |
Connection to the drain |
8 |
|
Water cut-off warning |
29 |
Adjusting the feet |
9 |
|
Overflowing warning |
29 |
Aquasafe+ |
9 |
|
6. Maintenance and cleaning |
30 |
Electrical connection |
9 |
|
Cleaning the outer surface of the |
|
Initial use |
9 |
|
|
|
|
product |
30 |
||
Disposing of packaging material |
10 |
|
||
|
Cleaning the interior of the machine |
30 |
||
Transportation of the product |
10 |
|
||
|
Cleaning the filters |
30 |
||
Compliance with the WEEE Directive and |
|
|||
|
Cleaning the hose filter |
31 |
||
Disposing of the Waste Product: |
10 |
|
||
|
Cleaning the impellers |
31 |
||
Compliance with RoHS Directive: |
10 |
|
||
|
7. Troubleshooting |
33 |
||
4. Prewashing |
11 |
|
||
|
|
|
||
Tips for energy saving |
11 |
|
|
|
Water softening system |
11 |
|
|
|
Adjusting the water softening |
|
|
|
|
system |
11 |
|
|
|
Adding salt |
12 |
|
|
|
Detergent |
13 |
|
|
|
Adding detergent |
13 |
|
|
|
Tablet detergents |
14 |
|
|
|
Rinse aid |
15 |
|
|
|
Silverware basket |
18 |
|
|
|
Collapsable lower basket |
|
|
|
|
wires (2 pieces) |
18 |
|
|
|
Collapsable lower basket |
|
|
|
|
wires (2 & 4 pieces) |
19 |
|
|
|
Adjusting the height of |
|
|
|
|
loaded upper basket |
20 |
|
|
|
Adjusting the height of |
|
|
|
|
loaded upper basket |
21 |
|
|
|
Adjusting the height of empty upper |
|
|
|
|
basket |
22 |
|
|
|
Overview
13 |
1. |
Upper dish basket with shelf |
|
2. |
Guide rail for the upper dish basket |
||
|
|||
|
3. |
Salt container |
|
|
4. |
Cutlery basket |
|
|
5. |
Detergent dispenser |
|
|
6. |
Door |
|
|
7. |
Control panel |
|
|
8. |
Filters |
|
|
9. |
Lower sprayer arm |
|
|
10. Lower basket |
||
|
11. Upper sprayer arm |
||
|
12. Housing (depends on the model) |
||
|
13. Turbo fan heat drying system |
||
|
|
(depends on the model) |
|
|
14. Model and serial tag |
||
|
3 |
EN |
This product complies with the following EU directives:
Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community
regulations.
2006/95/EC, 2004/108/EC, 93/68/EEC, IEC 60436, EN 50242
Power input |
220-240 V, 50 Hz |
|
Total power consumption |
1800-2100 W |
|
Heater power |
1800 W |
|
consumption |
||
|
||
Total current |
10 A (see type plate) |
|
(depends on the model) |
||
|
||
|
|
|
Drain pump power |
30 W |
|
consumption |
||
|
||
Water pressure |
0.3 –10 bar (= 3 – 100 N/cm² = 0.03-1.0 Mpa) |
|
Energy efficiency class |
“A” |
|
Electrical Safety class |
“1” |
CTechnical specifications may be changed without prior notice to improve the quality of the product.
CFigures in this manual are schematic and may not match the product exactly.
CValues stated on the product labels or in the documentation accompanying it are obtained in laboratory conditions in accordance with the relevant standards. Depending on operational and environmental conditions of the product, these values may vary.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests can be e-mailed to the following address:
dishwasher@standardloading.com
Do not forget to provide the code, stock and serial numbers of the product to be tested in your request e-mail along with your contact information. Code, stock and serial numbers of the product is located on the type label attached to the side of the door.
4 EN
This section contains safety instructions that will help to get protected from risk of personal injury or property damage Failure to follow these instructions shall void all warranties.
• Never place the product on a carpet-covered floor; otherwise, lack of airflow beneath the product will cause electrical parts
to overheat. This will cause problems with your product.
• Do not operate the product if the power cable / plug is damaged! Call the Authorised Service Agent.
• Connect the product to a grounded outlet protected by a fuse complying with the values in the “Technical
specifications” table. Do not neglect to have the grounding installation made by a qualified electrician. Manufacturer shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
• The water supply and
draining hoses must be securely fastened and remain undamaged.
• Unplug the product when not in use.
• Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!
• Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.
• The product must be unplugged during installation,
maintenance, cleaning and repairing procedures.
• Always have the installation and repairing procedures carried out by the Authorised Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.
• Never use chemical solvents in the product. They bring forth risk of explosion.
• When you pull the upper and lower baskets out completely, the door
of the product will bear all the weight of the
5 EN
baskets. Do not put other loads on the door; otherwise, the product may tilt.
• Never leave the door of the product open apart from loading and unloading procedures.
• Do not to open the door of the product when it is running unless necessary. Be careful for the rush of hot steam when you need to open the door.
This appliance is intended to be used in household and similar applications such as:
• staff kitchen areas in shops, offices and other working environments;
• farm houses;
• by clients in hotels, motels and other residential type environments;
• bed and breakfast type environments;
• Only dishwasher safe detergents, rinse aids and additives must be used.
• The manufacturer waives any responsibility arisen from incorrect usage or transportation.
• The service life of your product is 10 years. During this period, original spare parts will be available to operate the appliance properly.
•This product should not be used by persons with physical, sensory or mental disorders
or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product.
• Electrical products are dangerous for the children. Keep children away from the product
when it is in use. Do not let them to tamper with the product.
• Do not forget to close the door of the product when leaving the room where it is located.
• Store all detergents and additives in a safe place away from the reach of the children.
6 EN
Refer to the nearest Authorised Service Agent for installation of your product. To make the product ready for use, make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorised Service
Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.
CPreparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility.
BInstallation and electrical connections must be carried out by the Authorised Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.
BPrior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.
AMake sure that the water inlet and discharge hoses are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.
When placing the product, pay attention not to damage the floor, walls, piping, etc. Do not hold the product from its door or panel to move it.
7
·Place the product on a solid and flat floor that has sufficient load carrying capacity! The product must be installed on a flat surface in order for the door to be closed comfortably and securely.
·Do not install the product at places where temperature may fall below 0ºC.
·Place the product at least 1 cm away from the edges of other furniture.
·Place the product on a rigid floor. Do not place it on a long pile rug or similar surfaces.
ADo not place the product on the power cable.
·Make sure that you select a location that will allow you to load and unload the dishes in a fast and comfortable manner.
·Install the product in a place close to the tap and the drain hole. Select the installation location by considering that it will not be changed after the connections are made.
CWe recommend attaching a filter on the house/apartment supply water inlet to protect the machine from damages that may arise from impurities (sand, dirt, rust, etc.) coming from the urban water supply system or from your own water system as well as to prevent complaints such as yellowing or
EN
sludge accumulation at the end of washing.
Permitted water temperature: up to 25°C
The dishwasher may not be connected to open warm water devices or flow-through water heaters.
·Do not use old or used water inlet hose on the new product. Use the new water inlet hose supplied with the product.
·Connect the water inlet hose directly to the water tap. Pressure coming from the tap should be minimum 0.3 and maximum 10 bars. If the water pressure exceeds 10 bars, a pressure relief valve should be installed in between.
CUse a screw-on hose connector to connect the water inlet hose to a water tap with a ¾ inch external thread. If required, use a filter insert to filter deposits from the pipes.
Water discharge hose can directly be connected to the drain hole or sink’s drainage. The length of this connection must be min. 50 cm and max. 100 cm from the floor.
·Open the taps completely after making the connections to check for water leaks.
AFor your safety, close the water inlet tap completely after the washing programme is over.
A discharge hose longer than 4 meters causes dirty washing. Attach the water discharge hose to the drainpipe without bending it. Tightly fix the water discharge hose to the drainpipe in order to prevent
any dislocation of the water discharge hose during operation of the product.
CDrainpipe must be connected to the sewage system and it should not be connected to any surface water.
8 EN
If the door of the product cannot be closed properly or if the product swings when you push it slightly, then you need to adjust the feet of the product. Adjust the feet of the product as illustrated in the
installation manual supplied with the
product.
(depends on the model)
Protect the Aquasafe+ system against water leaks that may occur at hose inlet. Water contact with the valve box of the system must be prevented. Otherwise, electrical assembly will get damaged. If the
Aquasafe system is damaged, unplug the product and call the Authorised Service Agent.
AAs the hose set contains electrical connections and assemblies, never shorten or lengthen the hose with extension hoses.
Electrical connection
Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Manufacturer shall not be liable for any damages that will arise when the product
is used without grounding in accordance with the local regulations.
9
·Connection must comply with national regulations.
·Power cable plug must be within easy reach after installation.
AUnplug the product after the washing programme is over.
·The voltage and allowed fuse or breaker protection are specified in the “Technical specifications” section. If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 Amp fuse.
·The specified voltage must be equal to your mains voltage.
·Do not make connections via extension cables or multi-plugs.
BDamaged power cables must be replaced by the Authorised Service Agent.
BIf the product has a failure, it should not be operated unless it is repaired by the Authorised
Service Agent! There is the risk of electric shock!
Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections "Important
safety instructions" and "Installation".
·To prepare the product to do the dishes, perform first operation in the shortest programme with detergent while the machine is
empty. During the initial use, fill the salt reservoir with 1 litre of water prior to filling it with salt.
CSome water might have remained in the product due to the
quality control processes in the production. It is not harmful for the product.
EN
Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the
children.
Package information
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points
designated by the local authorities.
AIf you need to move the product, do it in upright position and hold from the rear side. Slanting the product onto its front side may cause the electronic parts in it get wet and damaged.
1.Unplug the product before transporting it.
2.Remove water drainage and water supply connections.
3.Drain the remaining water in the product completely.
Compliance with the WEEE Directive and
Disposing of the Waste
Product:
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
This product has been manufactured with high quality parts and materials which can be reused and are suitable
for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.
10 EN
Following information will help you use the product in an ecological and energy-efficient manner.
·Wipe away any coarse food remnants on the dishes before putting them in the product.
·Operate the product after filling it completely.
·When selecting a programme, refer to the “Programme Table”.
·Do not put more detergent than suggested on the detergent package.
CThe dishwasher requires soft water. If the hardness of the water is above 6°dH, the water must be softened and descaled. Otherwise, ions that create the hardness will accumulate on the surfaces of the dishes and may adversely affect the washing, shining and drying performances of the product.
The product is equipped with a water softening system which reduces the hardness of incoming water. This system softens the supply water that enters into the product to a level that will allow washing the dishes with the
required quality.
Washing performance will increase when water softening system is adjusted properly.
Use the test stripe supplied with the product to determine the supply water hardness in order to adjust the system.
11 EN