Beko DIS 4520 QUICK REFERENCE GUIDE

5 (1)
Beko DIS 4520 QUICK REFERENCE GUIDE

QUICK REFERENCE GUIDE

EN

! Attention: Please read the operating manual prior to operating the machine for the first time.

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Half Load Indicator

 

 

 

 

 

 

 

 

 

On / Off Key

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Tablet Detergent Indicator

10

Programme Indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Salt Indicator

11

Half Load / Tablet

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Start / Pause / Cancel

12

Detergent Key

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

Indicator

Programme Selection Key

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Start / Pause / Cancel Key

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6Time Delay Key

7Time Delay Indicator

8Rinse Aid indicator

Starting your machine

·Open the tap.

·Plug in to the socket.

·Open the door of the dishwasher.

·Place the dishes in accordance with the instructions in the user manual.

·Make sure that the upper and lower impellers rotate freely.

·Put sufficient amount of detergent in the detergent dispenser and close its lid.

·Make sure that indicators on programme display are illuminated by pressing On / Off key.

·Check if the Salt and Rinse Aid indicators light and add salt and / or rinse aid if needed.

Since different salt brands in the market have different particle sizes and since the water hardness may vary, dissolution of the salt in water may take a couple of hours. Therefore, Salt Indicator remains on for a while after adding salt into the machine.

·You may use Half Load / Tablet Detergent Key and Time Delay key features as necessary.

·Refer to "Table of Programme Data and Average

Consumption Values" to select a suitable programme.

· Select the desired programme with Programme Selection key. · Press Start / Pause / Cancel key to start the programme.

Pay attention not to open the door of the machine when it is running. If you need to open the door, safety system will stop your machine. There may be a rush of vapour when you open the door of your machine; be careful. The programme will resume running when you close the door.

· When the program you have selected comes to an end, an audible warning signal with intervals of 8 seconds will warn you to turn off your machine. This audible signal will warn you 10 times before it turns off. Press the on/off button after the programme is completed. The indicator lights will go off.

· Open the door of the dishwasher.

· Press On / Off key to turn off your machine.

· Indicator lights on the programme display will turn off. · Close the tap.

· Unplug the machine from the socket.

Leave your dishes in the machine for about 15 minutes after they are washed in order to have them cooled down.

 

 

Programme Table

 

 

Programme number

1 Reference*

2

3

4

5

Programme name

 

 

 

 

 

 

 

Pre-wash

30min.

Quick&Clean

Intensive

Cleaning temperature

50°C

-

35°C

60°C

70°C

Degree of Soiling Most economical washing program

Suitable for removing the

Suitable for lightly soiled daily

Daily washing program at which the

Suitable for heavily soiled dishes, pots

 

for the medium soiled daily dishes remnants on the soiled dishes that

dishes that are scraped or pre-

medium soiled dishes that are kept waiting

and pans.

 

that are kept waiting.

will be kept waiting in the machine

cleaned.

are cleaned in the fastest way.

 

 

 

for a few days, and thus, for

 

 

 

 

 

preventing the bad odor buildup.

 

 

 

 

Medium

-

Few

Medium

High

Detergents

A+B

-

A

A+B

A+B

A=25 cm³/15 cm³ B=5 cm³

 

 

 

 

 

 

Pre-wash

Pre-wash

Wash

Wash

Pre-wash

 

 

Wash

End

Cold rinse

Cold rinse

Cold rinse

 

 

 

Cold rinse

 

Hot Rinse

Hot Rinse

Hot Rinse

Programme sequence

 

Hot Rinse

 

End

Dry

Hot Rinse

(without options)

 

 

 

Dry

 

 

End

Dry

 

 

 

 

 

End

 

 

 

End

 

 

 

 

 

 

Duration (min)

172

15

30

58

110

 

 

 

 

 

 

Water (I)

13

3,6

10,2

10,6

15,2

 

 

 

 

 

 

Energy (kWh)

0,94

-

0,77

1,17

1,34

The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions.

* Reference programme for testing institutes The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and using the test programme.

Loading...
+ 1 hidden pages