We hope that your product, which has been produced in modern plants and
checked under the most meticulous quality control procedures, will provide you
with years of good service.
For this, we recommend you to carefully read the entire manual of your product
before using it and keep it at hand for future reference.
This manual
• Will help you use your appliance quickly and safely.
• Read the manual before installing and operating your product.
• Follow the instructions, especially those for safety.
• Keep the manual in an easily accessible place as you may need it later.
• Besides, read also the other documents provided with your product.
Please note that this manual may be valid for other models as well.
Symbols and their descriptions
This instruction manual contains the following symbols:
C Important information or useful usage tips.
A Warning against dangerous conditions for life and property.
B Warning against electric voltage.
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE).
This means that this product must be handled pursuant to European Directive
2002/96/EC in order to be recycled or dismantled to minimise its impact on
the environment. For further information, please contact your local or regional
authorities.
Electronic products not included in the selective sorting process are potentially
dangerous for the environment and human heatlh due to the presence of
hazardous substances.
CONTENTS
1 Your refrigerator 3
2 Warnings 4
Electrical Requirements .....................5
Important! Fitting A Different Plug .......5
Energy Saving Tips ............................6
3 Installation 7
TRANSPORTATION INSTRUCTIONS .7
REVERSING THE DOORS ...............10
4 Before operating 13
Final Check .....................................13
5 Using your refrigerator 14
FREEZING FRESH FOOD ................14
DEFROSTING ..................................15
A) FRIDGE COMPARTMENT ...........15
B) FREEZER COMPARTMENT.........15
6 Maintenance and
cleaning 16
7 Do's and Don'ts 17
EN
2
1 Your refrigerator
Congratulations on your choice of a BEKO quality Appliance which has been
designed to give you service for many years.
1
2
3
4
5
6
5
5
5
7
8
9
10
1. Ice cube tray
2. Freezer shelf
3. Interior light
4. Thermostat knob
5. Fridge compartment shelves
6. Wine rack
11
12
12
12
13
7. Crisper humidity-control knob
8. Crisper cover
9. Salad crispers
10. Adjustable front feet
11. Egg tray
12 .Door shelf - 3 pcs.
13. Bottle rack
CFigures that take place in this instruction manual are schematic and may
not correspond exactly with your product. If the subject parts are not included in
the product you have purchased, then it is valid for other models.
EN
3
2 Warnings
• Do not connect your appliance to the
electricity supply until all packing and
transit protectors have been removed.
• Leave to stand for at least 4 hours
before switching on to allow the system
to settle if transported horizontally.
• This appliance must only be used for
its intended purpose, ie the storing and
freezing of edible foodstuff.
• To obtain the best possible
performance and trouble free operation
from your appliance, it is very important
to carefully read these instructions.
• On delivery, check to make sure that
the product is not damaged and that all
the parts and accessories are in perfect
condition.
• We do not recommend the use
of extension leads and multi-way
adapters.
• Failure to observe these instructions
may invalidate your right to free service
during the guarantee period. BEKO plc
declines to accept any liability should
the instructions not be followed.
• Do not dispose of the appliance on a
fire. At BEKO, the care and protection
of our environment is an ongoing
commitment. This appliance which
is among the latest range introduced
is particularly environment friendly.
Your appliance contains non CFC /
HFC natural substances in the cooling
system (Called R600a) and in the
insulation (Called cyclopentane) which
are potentially flammable if exposed to
fire.
Therefore, take care not to damage,
the cooling circuit / pipes of the
appliance in transportation and in use.
In case of damage do not expose the
appliance to fire or potential ignition
source and immediately ventilate the
room where the appliance is situated.
• We suggest you contact your local
authority for disposal information and
facilities available.
• Keep ventilation openings, in the
appliance enclosure or in the built-in
structure, clear of obstruction.
• Do not use mechanical devices
or other means to accelerate the
defrosting process, other than those
recommended by the manufacturer.
• Do not damage the refrigerant
circuit.
• Do not use electrical appliances
inside the food storage compartments
of the appliance, unless they are
of the type recommended by the
manufacturer.
• We suggest you keep these
instructions in a safe place for easy
reference.
• This appliance is not intended for
use by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to
ensure that they do not play with the
appliance.
EN
4
Electrical Requirements
Before you insert the plug into the
wall socket make sure that the voltage
and the frequency shown on the rating
plate inside the appliance corresponds
to your electricity supply.
Rating label is on the left hand side of
fridge inner liner.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket.
The appliance must be positioned so
that the plug is accessible.
Should the mains lead of the appliance
become damaged or should it need
replacing at any time, it must be
replaced by a special purpose made
mains lead which can only be obtained
from a BEKO Authorised Service Agent.
Warning! This appliance must be
earthed
If the fitted moulded plug is not suitable
for your socket, then the plug should be
cut off and an appropriate plug fitted.
Destroy the old plug which is cut off as
a plug with bared cord could cause a
shock hazard if inserted into a socket
elsewhere in the house.
The moulded plug on this appliance
incorporates a 13 A fuse. Should
the fuse need to be replaced an
ASTABEAB approved BS 1362 fuse
of the same rating must be used. Do
not forget to refit the fuse cover. In the
event of losing the fuse cover the plug
must not be used until a replacement
fuse cover has been fitted. Colour of
the replacement fuse cover must be
the same colour as that visible on the
pin face of the plug. Fuse covers are
available from any good electrical store.
Important! Fitting A Different
Plug
As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your plug
proceed as follows: (See diagram).
1. Connect the green-yellow or green
(Earth) wire to the terminal in the plug
marked ‘E’ or with the symbol or
coloured green and yellow or green.
2. Connect the blue (Neutral) wire to
the terminal in the plug marked ‘N’ or
coloured black.
3. Connect the brown (Live) wire to
the terminal in the plug marked ‘L’ or
coloured red.
With alternative plugs a 13 A fuse must
be fitted either in the plug or adaptor or
in the main fuse box. If in doubt contact
a qualified electrician.
GREEN &
YELLOW
GREEN
N
BLUE
OR
BLACK
OR
6mm.
L
32mm.
BROWN
OR
RED
22mm.
6mm.
CORD GRIP
12mm.
6mm.
FUSE
FITTED WITH
CARTRIDGE FUSE
FIT BS 1362 REPLACEMENT
BS 1362 13A FUSE ALWAYS
EN
5
Energy Saving Tips
1- Ensure your appliance is installed
in a well ventilated area.
2- Ensure the time between buying
chilled/frozen food and placing them in
your appliance is kept to a minimum,
particularly in summer. We recommend
you use a cool bag or a special carrier
bag to carry frozen food.
3- Do not leave the door (s) of your
appliance open longer than necessary
and ensure they are closed properly
after each opening.
4- Defrost frozen food in the fridge
compartment, so that frozen food acts
as an ice pack to assist cooling in the
fridge.
EN
6
Loading...
+ 15 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.