BECKHOFF CB4063 User Manual
CB4063
Manual
rev. 0.6
Beckhoff Automation GmbH Telefon: +49 (0) 52 46/963-0
Eiserstr. 5 Fax: +49 (0) 52 46/963-198
33415 Verl Email: info@beckhoff.de
Germany Web: www.beckhoff.de
Contents
Contents
0 Document History................................................................................................................................. 6
1 Introduction .......................................................................................................................................... 7
1.1 Notes on the Documentation ........................................................................................................ 7
1.1.1 Liability Conditions ................................................................................................................ 7
1.1.2 Copyright ............................................................................................................................... 7
1.2 Safety Instructions ........................................................................................................................ 8
1.2.1 Disclaimer ............................................................................................................................. 8
1.2.2 Description of Safety Symbols .............................................................................................. 9
1.3 Essential Safety Measures ......................................................................................................... 10
1.3.1 Operator's Obligation to Exercise Diligence ....................................................................... 10
1.3.2 National Regulations Depending on the Machine Type ..................................................... 10
1.3.3 Operator Requirements ...................................................................................................... 10
1.4 Functional Range ........................................................................................................................ 11
2 Overview ............................................................................................................................................ 12
2.1 Features ...................................................................................................................................... 12
2.1.1 Specifications and Documents ........................................................................................... 14
3 Connectors ......................................................................................................................................... 15
3.1 Connector Map ........................................................................................................................... 16
3.2 Power Supply .............................................................................................................................. 17
3.3 System/SM-Bus .......................................................................................................................... 18
3.4 Memory ....................................................................................................................................... 19
3.5 PCI/104-Express Bus ................................................................................................................. 22
3.6 PCI-Express Mini Card with mSATA .......................................................................................... 24
3.7 DVI/HDMI/VGA ........................................................................................................................... 25
3.8 DisplayPort.................................................................................................................................. 26
3.9 USB 2.0 ....................................................................................................................................... 27
3.10 USB 3.0 ....................................................................................................................................... 28
3.11 LAN ............................................................................................................................................. 29
3.12 Audio ........................................................................................................................................... 30
3.13 SATA Interfaces .......................................................................................................................... 31
3.14 COM1 and COM2 ....................................................................................................................... 32
3.15 GPIO ........................................................................................................................................... 33
3.16 Monitoring Functions .................................................................................................................. 34
4 State LEDs ......................................................................................................................................... 35
4.1 HD LED ....................................................................................................................................... 35
4.2 RGB LED .................................................................................................................................... 36
4.3 LAN Activity LED ........................................................................................................................ 37
4.4 LAN Speed LED ......................................................................................................................... 38
5 BIOS Settings ..................................................................................................................................... 39
5.1 General Remarks ........................................................................................................................ 39
5.2 Main ............................................................................................................................................ 40
5.3 Advanced .................................................................................................................................... 41
5.3.1 ACPI Settings...................................................................................................................... 43
5.3.2 H/W Monitor ........................................................................................................................ 44
5.3.3 CPU Configuration .............................................................................................................. 46
5.3.4 PPM Configuration .............................................................................................................. 50
Beckhoff New Automation Technology CB4063 page 3
Contents
5.3.5 SATA Configuration ............................................................................................................ 51
5.3.6 Miscellaneous Configuration ............................................................................................... 52
5.3.7 LPSS & SCC Configuration ................................................................................................ 53
5.3.8 Network Stack ..................................................................................................................... 55
5.3.9 Power Controller Options .................................................................................................... 56
5.3.10 CSM Configuration ............................................................................................................. 58
5.3.11 SDIO Configuration ............................................................................................................. 59
5.3.12 USB Configuration .............................................................................................................. 60
5.3.13 Security Configuration ........................................................................................................ 61
5.4 Chipset ........................................................................................................................................ 62
5.4.1 North Bridge ........................................................................................................................ 63
5.4.2 South Bridge ....................................................................................................................... 67
5.5 Security ....................................................................................................................................... 71
5.5.1 Secure Boot menu .............................................................................................................. 72
5.6 Boot ............................................................................................................................................. 75
5.7 Save & Exit ................................................................................................................................. 76
5.8 BIOS-Update .............................................................................................................................. 77
6 Mechanical Drawings ......................................................................................................................... 78
6.1 PCB: Mounting Holes ................................................................................................................. 78
6.2 PCB: Pin 1 Dimensions - Top ..................................................................................................... 79
6.3 PCB: Pin 1 Dimensions - Bottom ................................................................................................ 80
6.4 PCB: Heat Sink/Die Center ......................................................................................................... 81
7 Technical Data ................................................................................................................................... 82
7.1 Electrical Data ............................................................................................................................. 82
7.2 Environmental Conditions ........................................................................................................... 82
7.3 Thermal Specifications ............................................................................................................... 83
I Annex: Post-Codes ............................................................................................................................ 85
II Annex: Resources .............................................................................................................................. 86
IO Range ................................................................................................................................................ 86
Memory Range ....................................................................................................................................... 86
Interrupt .................................................................................................................................................. 86
PCI Devices ............................................................................................................................................ 87
SMB Devices .......................................................................................................................................... 87
page 4 Beckhoff New Automation Technology CB4063
Notes on the Documentation Chapter: Document History
Beckhoff New Automation Technology CB4063 page 5
Chapter: Document History Notes on the Documentation
Version
Changes
0.1
first pre-release
0.2
updated LED status codes
0.3
minor changes
0.4
added mechanical drawings
0.5
changed safety symbols according to ANSI
chapter 2.1: added resolution
chapter 3.7: corrected pinout
chapter 3.8: added HDMI pinout
0.6
chapter 3.8: correction
0 Document History
NOTE
All company names, brand names, and product names referred to in this manual are registered or
unregistered trademarks of their respective holders and are, as such, protected by national and
international law.
page 6 Beckhoff New Automation Technology CB4063
Notes on the Documentation Chapter: Introduction
1 Introduction
1.1 Notes on the Documentation
This description is only intended for the use of trained specialists in control and automation engineering
who are familiar with the applicable national standards. It is essential that the following notes and
explanations are followed when installing and commissioning these components.
1.1.1 Liability Conditions
The responsible staff must ensure that the application or use of the products described satisfy all the
requirements for safety, including all the relevant laws, regulations, guidelines and standards.
The documentation has been prepared with care. The products described are, however, constantly under
development. For that reason the documentation is not in every case checked for consistency with
performance data, standards or other characteristics. None of the statements of this manual represents a
guarantee (Garantie) in the meaning of § 443 BGB of the German Civil Code or a statement about the
contractually expected fitness for a particular purpose in the meaning of § 434 par. 1 sentence 1 BGB. In
the event that it contains technical or editorial errors, we retain the right to make alterations at any time
and without warning. No claims for the modification of products that have already been supplied may be
made on the basis of the data, diagrams and descriptions in this documentation.
1.1.2 Copyright
© This documentation is copyrighted. Any reproduction or third party use of this publication, whether in
whole or in part, without the written permission of Beckhoff Automation GmbH, is forbidden.
Beckhoff New Automation Technology CB4063 page 7
Chapter: Introduction Safety Instructions
1.2 Safety Instructions
Please consider the following safety instructions and descriptions. Product specific safety instructions are
to be found on the following pages or in the areas mounting, wiring, commissioning etc.
1.2.1 Disclaimer
All the components are supplied in particular hardware and software configurations appropriate for the
application. Modifications to hardware or software configurations other than those described in the
documentation are not permitted, and nullify the liability of Beckhoff Automation GmbH.
page 8 Beckhoff New Automation Technology CB4063
Safety Instructions Chapter: Introduction
1.2.2 Description of Safety Symbols
The following safety symbols are used in this documentation. They are intended to alert the reader to the
associated safety instructions.
ACUTE RISK OF INJURY!
If you do not adhere to the safety advise next to this symbol, there is immediate danger to life and health
of individuals!
RISK OF INJURY!
If you do not adhere to the safety advise next to this symbol, there is danger to life and health of
individuals!
HAZARD TO INDIVIDUALS, ENVIRONMENT, DEVICES, OR DATA!
If you do not adhere to the safety advise next to this symbol, there is obvious hazard to individuals, to
environment, to materials, or to data.
NOTE OR POINTER
This symbol indicates information that contributes to better understanding.
Beckhoff New Automation Technology CB4063 page 9
Chapter: Introduction Essential Safety Measures
1.3 Essential Safety Measures
1.3.1 Operator's Obligation to Exercise Diligence
The operator must ensure that
o the product is only used for its intended purpose
o the product is only operated in sound condition and in working order
o the instruction manual is in good condition and complete, and always available for reference at the
location where the products are used
o the product is only used by suitably qualified and authorised personnel
o the personnel is instructed regularly about relevant occupational safety and environmental protection
aspects
o the operating personnel is familiar with the operating manual and in particular the safety notes
contained herein
1.3.2 National Regulations Depending on the Machine Type
Depending on the type of machine and plant in which the product is used, national regulations governing
the controllers of such machines will apply, and must be observed by the operator. These regulations
cover, amongst other things, the intervals between inspections of the controller. The operator must initiate
such inspections in good time.
1.3.3 Operator Requirements
o Read the operating instructions
All users of the product must have read the operating instructions for the system they work with.
o System know-how
All users must be familiar with all accessible functions of the product.
page 10 Beckhoff New Automation Technology CB4063
Functional Range Chapter: Introduction
1.4 Functional Range
NOTE
The descriptions contained in the present documentation represent a detailed and extensive product
description. As far as the described motherboard was acquired as an integral component of an Industrial
PC from Beckhoff Automation GmbH, this product description shall be applied only in limited scope. Only
the contractually agreed specifications of the corresponding Industrial PC from Beckhoff Automation
GmbH shall be relevant. Due to several models of Industrial PCs, variations in the component placement
of the motherboards are possible. Support and service benefits for the built-in motherboard will be
rendered by Beckhoff Automation GmbH exclusively as specified in the product description (inclusive
operation system) of the particular Industrial PC.
Beckhoff New Automation Technology CB4063 page 11
Chapter: Overview Features
1x
SoDIMM204
DDR3L-
1333
MEMORY
Power VCCCore;
DDRVTT; GFXVCC;
1.05V; 1.5V; 1.8V; 3.3V
BIOS
SATA1-2
RealTek®
ALC889
HDA Link
USB 2, 3, 5 & 6
1.5GB/3.0GB
Intel®
i210
LAN1
10/100/1000
SMBus
SPI
NXP®
PCA9535
SMBus
16x GPIO
MIC 1/2
5.1 Audio
AUX l/r
SPDIF i/o
PIC3
(24FJ256GB210)
FAN
DVI/HDMI
DVI/HDMI/DP
PCIe(x1)
Intel® Atom™
E3827, E3845,
E3815
USB1
USB2.0
PCIe/104 connector (type 2)
PCIe Mini Card
1x mSATA, 1x USB2.0
Intel®
i210
10/10
0/100
0
LAN2
USB2.0
USB3.0
SMBus
COM 1-2
LPC
2x USB
2x (1x) PCIe x1
2 Overview
2.1 Features
The CB4063 is a highly complex motherboard in the PC/104™ form factor, complying with the
state-of-the-art "PCIe/104™" standard. It's based on a System-On-Chip (SoC) of Intel®'s Atom E3800
product family. Modern low voltage DDR3 technology provides top-notch memory performance,
accomodating up to 8 GByte of RAM (DDR3L-1600) via SO-DIMM204. PCI-Express is available through
the PCI/104-Express Type 2 connector, offering two x1 lanes for connecting all kinds of corresponding
expansion cards in a PCIe/104™ stack-down fashion. For connecting graphics devices, several interfaces
are available: CRT, HDMI and DisplayPort. Additional interfaces include two serial ports, two Gigabit
Ethernet interfaces (LAN), two SATA channels (up to 3Gb/s), an audio interface (HDA 7.1), eight USB2.0Âchannels and one USB3.0-channels. There are also 16 discrete programmable GPIO signals available.
o Prozessor Intel® BayTrail-I (Atom™ E3827, E3845, E3815)
o SoC: System on Chip
o SO-DIMM204 socket for one DDR3L-1600 module of up to 8 GByte
o Two serial interfaces COM1-2
o Two LAN interfaces Ethernet 10/100/1000 (Base-T)
o Two SATA channels (1,5/3 Gb/s)
o Eight USB 2.0 interfaces (two on PCI104-Express connector, one on miniPCIe socket)
o One USB 3.0 interface
o BIOS AMI® Aptio
o DisplayPort interface (max. resolution 2560 x 1600)
o HDMI interface (max. resolution 1920 x 1200)
page 12 Beckhoff New Automation Technology CB4063
Features Chapter: Overview
o CRT interface
o HDA compatible sound controller with SPDIF in and out
o RTC with external CMOS battery
o PCI-Express bus via PCI/104-Express connector (type 2, two x1 lanes)
o miniPCI-Express bus via miniPCIe-card connector (by default with additional USB 2.0 interface or with
mSATA)
o 16x GPIO
o Watchdog
o 5V and 12V supply voltage
o Size: 96 mm x 90 (115.5) mm
NOTICE
For optimal driver compatibility we recommend the use of a Microsoft® Windows® 8 operating system.
Beckhoff New Automation Technology CB4063 page 13
Chapter: Overview Features
2.1.1 Specifications and Documents
In making this manual and for further reading of technical documentation, the following documents,
specifications and web-pages were used and are recommended.
 PC/104™ Specification
Version 2.5
www.pc104.org
 PC/104-Plus™ Specification
Version 2.0
www.pc104.org
 PCI/104-Express™ Specification
Version 2.01
www.pc104.org
 PCI Specification
Version 2.3 and 3.0
www.pcisig.com
 ACPI Specification
Version 5.0
www.acpi.info
 ATA/ATAPI Specification
Version 7 Rev. 1
www.t13.org
 USB Specifications
www.usb.org
 SM-Bus Specification
Version 2.0
www.smbus.org
 Intel® Chipset Description
Intel® 8 Series Chipset Datasheet
www.intel.com
 Intel® Chip Description
i210 Datasheet
www.intel.com
 Realtek® Chip Description
ALC885/889 Datasheet
www.realtek.com.tw
 Chrontel® Chip Description
Chrontel 7318C Datasheet
www.chrontel.com
 American Megatrends®
Aptio™ Text Setup Environment (TSE) User Manual
www.ami.com
 American Megatrends®
Aptio™ 4.x Status Codes
www.ami.com
page 14 Beckhoff New Automation Technology CB4063
Features Chapter: Connectors
3 Connectors
This section describes all the connectors found on the CB4063.
NOTICE
For most interfaces, the cables must meet certain requirements. For instance, USB 2.0 requires twisted
and shielded cables to reliably maintain full speed data rates. Restrictions on maximum cable length are
also in place for many high speed interfaces and for power supply. Please refer to the respective
specifications and use suitable cables at all times.
Beckhoff New Automation Technology CB4063 page 15
Chapter: Connectors Connector Map
Ref.-No.
Function
Page
P500
"SATA Interfaces"
p. 31
P501
"USB 3.0"
p. 28
P700/2
"COM1 and COM2"
p. 32
P701/3
"LAN"
p. 29
P704
"Audio"
p. 30
P705
"USB 2.0"
p. 27
P1200
"DVI/HDMI/VGA"
p. 25
P1201
"DisplayPort"
p. 26
P1300
"GPIO"
p. 33
P1301
"Power Supply"
p. 17
P1302
"System/SM-Bus"
p. 18
P1303
"Monitoring Functions"
p. 34
U600*
"Memory"
p. 19
P1100*
"PCI/104-Express Bus"
p. 22
P1101*
"PCI-Express Mini Card with mSATA"
p. 24
3.1 Connector Map
Please use the connector map below for quick reference. Only connectors on the component side are
shown. For more information on each connector refer to the table below.
* not pictured (see bottom of the board)
page 16 Beckhoff New Automation Technology CB4063
Power Supply Chapter: Connectors
Description
Name
Pin
Name
Description
12 volt supply
12V
1 6 12V
12 volt supply
ground
GND
2 7 GND
ground
ground
GND
3 8 SVCC
standby-supply 5V
ground
GND
4 9 GND
ground
5 volt supply
VCC
5
10
VCC
5 volt supply
3.2 Power Supply
The power supply of the hardware module is realized via a 2x5-pin connector (Molex PS 43045-10xx,
mating connector: Molex PS 43025-10xx). Both 5V VCC/SVCC and 12V need to be provided. The 12V
input can optionally be tied to 5V if 12V is not required by attached peripherals.
NOTICE
The CB4063 includes circuitry that will notify an intelligent power supply to shut down if the processor
reaches a critical temperature. This is achieved by deasserting the (low-active) PS_ON# signal found on
the SM-Bus connector. When PS_ON# is no longer pulled low, an intelligent power supply would take this
as a signal to shut down power. For this to work, PS_ON# must be connected to the power supply's
PS_ON input. If PS_ON# is not otherwise connected, the CB4063 can be damaged beyond repair if a
thermal shutdown event occurs. In rare instances, if power is not shut down, the board will continue to
heat up until failure occurs.
NOTICE
Since this is a 90 degree connector, the symbol in the drawing below represents the connector face as
seen from the side (PCB on bottom) rather than from above.
Beckhoff New Automation Technology CB4063 page 17
Chapter: Connectors System/SM-Bus
Dsecription
Name
Pin
Name
Description
ATX Powerbutton
ATXPWRBTN
#
1
11
GND
ground
reset to ground
RSTBTN#
2
12
GND
ground
battery
BATT
3
13
GND
ground
speaker
SPEAKER
4
14
VCC
5V supply
SATA LED
SATALED#
5
15
3.3V
3.3V supply
Rot / LED0
RED/LED 0
6
16
GREEN/LED1
green / LED1
Blau / LED2
BLUE/LED2
7
17
S3.3V
standby supply 3.3V
PS-ON
PSON#
8
18
S3.3V
standby supply 3.3V
Systembus clock
SMB-CLK
9
19
SMB-ALERT
Systembus alert
Systembus data
SMB-DAT
10
20
GND
ground
3.3 System/SM-Bus
Both SM-Bus signals, and signals e.g. speaker are provided through a 2x10pin connector (FCI
98424-G52-20LF, mating connector e.g. FCI 90311-020LF). For the #PSON signal, please refer to the
cautionary note in the chapter "Power Supply" (page 17).
Pinout 2x10 system connector:
page 18 Beckhoff New Automation Technology CB4063
Memory Chapter: Connectors
Description
Name
Pin
Name
Description
memory reference current
REF-DQ
1 2 GND
ground
ground
GND
3 4 DQ4
data 4
data 0
DQ0
5 6 DQ5
data 5
data 1
DQ1
7 8 GND
ground
ground
GND
9
10
DQS0#
data strobe 0 -
data mask 0
DM0
11
12
DQS0
data strobe 0 +
ground
GND
13
14
GND
ground
data 2
DQ2
15
16
DQ6
data 6
data 3
DQ3
17
18
DQ7
data 7
ground
GND
19
20
GND
ground
data 8
DQ8
21
22
DQ12
data 12
data 9
DQ9
23
24
DQ13
data 13
ground
GND
25
26
GND
ground
data strobe 1 -
DQS1#
27
28
DM1
data mask 1
data strobe 1 +
DQS1
29
30
RESET#
Reset
ground
GND
31
32
GND
ground
data 10
DQ10
33
34
DQ14
data 14
data 11
DQ11
35
36
DQ15
data 15
ground
GND
37
38
GND
ground
data 16
DQ16
39
40
DQ20
data 20
data 17
DQ17
41
42
DQ21
data 21
ground
GND
43
44
GND
ground
data strobe 2 -
DQS2#
45
46
DM2
data mask 2
data strobe 2 +
DQS2
47
48
GND
ground
ground
GND
49
50
DQ22
data 22
3.4 Memory
There is one conventional SO-DIMM204 socket available to equip the board with memory (DDR3L-1333).
It is located on the bottom side of the board. For technical and mechanical reasons it is possible that
particular memory modules cannot be employed. Please ask your sales representative for recommended
memory modules.
With currently available SO-DIMM modules a memory extension up to 8 GByte is possible. The timing
parameters for different memory modules are automatically set by BIOS.
Pinout SO-DIMM204:
Beckhoff New Automation Technology CB4063 page 19
Chapter: Connectors Memory
Description
Name
Pin
Name
Description
data 18
DQ18
51
52
DQ23
data 23
data 19
DQ19
53
54
GND
ground
ground
GND
55
56
DQ28
data 28
data 24
DQ24
57
58
DQ29
data 29
data 25
DQ25
59
60
GND
ground
ground
GND
61
62
DQS3#
data strobe 3 -
data mask 3
DQM3
63
64
DQS3
data strobe 3 +
ground
GND
65
66
GND
ground
data 26
DQ26
67
68
DQ30
data 30
data 27
DQ27
69
70
DQ31
data 31
ground
GND
71
72
GND
ground
clock enables 0
CKE0
73
74
CKE1
clock enables 1
1.5 volt supply
1.5V
75
76
1.5V
1.5 volt supply
reserved
N/C
77
78
(A15)
reserved
SDRAM bank 2
BA2
79
80
A14
address 14
1.5 volt supply
1.5V
81
82
1.5V
1.5 volt supply
address 12 (burst chop)
A12/BC#
83
84
A11
address 11
address 9
A9
85
86
A7
address 7
1.5 volt supply
1.5V
87
88
1.5V
1.5 volt supply
address 8
A8
89
90
A6
address 6
address 5
A5
91
92
A4
address 4
1.5 volt supply
1.5V
93
94
1.5V
1.5 volt supply
address 3
A3
95
96
A2
address 2
address 1
A1
97
98
A0
address 0
1.5 volt supply
1.5V
99
100
1.5V
1.5 volt supply
Clock 0 +
CK0
101
102
CK1
clock 1 +
Clock 0 -
CK0#
103
104
CK1#
clock 1 -
1.5 volt supply
1.5V
105
106
1.5V
1.5 volt supply
address 10 (auto precharge)
A10/AP
107
108
BA1
SDRAM bank 1
SDRAM Bank 0
BA0
109
110
RAS#
row address strobe
1.5 volt supply
1.5V
111
112
1.5V
1.5 volt supply
write enable
WE#
113
114
S0#
chip select 0
column address strobe
CAS#
115
116
ODT0
on die termination 0
1.5 volt supply
1.5V
117
118
1.5V
1.5 volt supply
address 13
A13
119
120
ODT1
on die termination 1
Chip Select 1
S1#
121
122
N/C
reserved
1.5 volt supply
1.5V
123
124
1.5V
1.5 volt supply
reserved
(TEST)
125
126
REF-CA
reference current
ground
GND
127
128
GND
ground
data 32
DQ32
129
130
DQ36
data 36
data 33
DQ33
131
132
DQ37
data 37
ground
GND
133
134
GND
ground
data strobe 4 -
DQS4#
135
136
DQM4
data mask 4
data strobe 4 +
DQS4
137
138
GND
ground
ground
GND
139
140
DQ38
data 38
data 34
DQ34
141
142
DQ39
data 39
data 35
DQ35
143
144
GND
ground
ground
GND
145
146
DQ44
data 44
data 40
DQ40
147
148
DQ45
data 45
data 41
DQ41
149
150
GND
ground
ground
GND
151
152
DQS5#
data strobe 5 -
data mask 5
DQM5
153
154
DQS5
data strobe 5 +
ground
GND
155
156
GND
ground
data 42
DQ42
157
158
DQ46
data 46
data 43
DQ43
159
160
DQ47
data 47
page 20 Beckhoff New Automation Technology CB4063
Memory Chapter: Connectors
Description
Name
Pin
Name
Description
ground
GND
161
162
GND
ground
data 48
DQ48
163
164
DQ52
data 52
data 49
DQ49
165
166
DQ53
data 53
ground
GND
167
168
GND
ground
data strobe 6 -
DQS6#
169
170
DQM6
data mask 6
data strobe 6
DQS6
171
172
GND
ground
ground
GND
173
174
DQ54
data 54
data 50
DQ50
175
176
DQ55
data 55
data 51
DQ51
177
178
GND
ground
ground
GND
179
180
DQ60
data 60
data 56
DQ56
181
182
DQ61
data 61
data 57
DQ57
183
184
GND
ground
ground
GND
185
186
DQS7#
data strobe 7 -
data mask 7
DQM7
187
188
DQS7
data strobe 7 +
ground
GND
189
190
GND
ground
data 58
DQ58
191
192
DQ62
data 62
data 59
DQ59
193
194
DQ63
data 63
ground
GND
195
196
GND
ground
SPD address 0
SA0
197
198
EVENT#
Event
3.3 volt supply
3.3V
199
200
SDA
SMBus data
SPD address 1
SA1
201
202
SCL
SMBus clock
termination current
VTT
203
204
VTT
termination current
Beckhoff New Automation Technology CB4063 page 21
Chapter: Connectors PCI/104-Express Bus
Description
Name
Pin
Name
Description
USB Overcurrent
USBOC#
1 2 PERST#
PCIe reset
3.3V supply
3.3V
3 4 3.3V
3.3V supply
USB7 +
USB7
5 6 USB8
USB8 +
USB7 -
USB7#
7 8 USB8#
USB8 -
ground
GND
9
10
GND
ground
transmit lane 2 +
PEx1_1T
11
12
PEx1_0T
transmit lane 1 +
transmit lane 2 -
PEx1_1T#
13
14
PEx1_0T#
transmit lane 1 -
ground
GND
15
16
GND
ground
reserved
N/C
17
18
N/C
reserved
reserved
N/C
19
20
N/C
reserved
ground
GND
21
22
GND
ground
receive lane 2 +
PEx1_1R
23
24
PEx1_0R
receive lane 1 +
receive lane 2 -
PEx1_1R#
25
26
PEx1_0R#
receive lane 1 -
ground
GND
27
28
GND
ground
reserved
N/C
29
30
N/C
reserved
reserved
N/C
31
32
N/C
reserved
ground
GND
33
34
GND
ground
clock slot 2 +
PEx1_1C
35
36
PEx1_0C
clock slot 1 +
clock slot 2 -
PEx1_1C#
37
38
PEx1_0C#
clock slot 1 -
5V standby supply
SVCC
39
40
SVCC
5V standby supply
reserved
N/C
41
42
N/C
reserved
reserved
N/C
43
44
N/C
reserved
CPU direction
CPU_DIR
45
46
PWRGOOD
Powergood
SMBus data
SMBDAT
47
48
N/C
reserved
SMBus clock
SMBCLK
49
50
N/C
reserved
SMBus alert
SMBALERT
51
52
PSON#
PS ON
link reactivation
PEWAKE#
53
54
ST1-ERR#
stacking error 1
3.5 PCI/104-Express Bus
Expansion modules for the PCI-Express bus can be connected to the board using the PCI/104-Express™
connector. This is a "type 2" connector with only those signals connected that are supported by the
chipset. "Stacking Error" functionality is available. For specifics, please refer to the PCI/104-Express™
documentation (rev. 2.01).
Pinout PCI104-Express connector (type 2):
page 22 Beckhoff New Automation Technology CB4063
PCI/104-Express Bus Chapter: Connectors
Description
Name
Pin
Name
Description
ground
GND
55
56
GND
ground
reserved
N/C
57
58
N/C
reserved
reserved
N/C
59
60
N/C
reserved
ground
GND
61
62
GND
ground
reserved
N/C
63
64
N/C
reserved
reserved
N/C
65
66
N/C
reserved
ground
GND
67
68
GND
ground
reserved
N/C
69
70
N/C
reserved
reserved
N/C
71
72
N/C
reserved
ground
GND
73
74
GND
ground
reserved
N/C
75
76
N/C
reserved
reserved
N/C
77
78
N/C
reserved
ground
GND
79
80
GND
ground
reserved
N/C
81
82
N/C
reserved
reserved
N/C
83
84
N/C
reserved
ground
GND
85
86
GND
ground
reserved
N/C
87
88
N/C
reserved
reserved
N/C
89
90
N/C
reserved
ground
GND
91
92
GND
ground
reserved
N/C
93
94
N/C
reserved
reserved
N/C
95
96
N/C
reserved
ground
GND
97
98
GND
ground
reserved
N/C
99
100
N/C
reserved
reserved
N/C
101
102
N/C
reserved
ground
GND
103
104
GND
ground
stacking error 2
ST2-ERR#
105
106
LPCCLK
PCI clock
ground
GND
107
108
GND
ground
reserved
N/C
109
110
N/C
reserved
reserved
N/C
111
112
N/C
reserved
ground
GND
113
114
GND
ground
reserved
N/C
115
116
N/C
reserved
reserved
N/C
117
118
N/C
reserved
ground
GND
119
120
GND
ground
reserved
N/C
121
122
N/C
reserved
reserved
N/C
123
124
N/C
reserved
ground
GND
125
126
GND
ground
reserved
N/C
127
128
N/C
reserved
reserved
N/C
129
130
N/C
reserved
ground
GND
131
132
GND
ground
reserved
N/C
133
134
N/C
reserved
reserved
N/C
135
136
N/C
reserved
ground
GND
137
138
GND
ground
reserved
N/C
139
140
N/C
reserved
reserved
N/C
141
142
N/C
reserved
ground
GND
143
144
GND
ground
LPC address/data 0
LPCAD0
145
146
LPCDRQ#
LPC DMA request
LPC address/data 1
LPCAD1
147
148
LPCSIRQ#
LPC serial IRQ
ground
GND
149
150
GND
ground
LPC address/data 2
LPCAD2
151
152
LPCFRAME#
LPC frame
LPC address/data 3
LPCAD3
153
154
RTCBATT
battery 3.3V
ground
GND
155
156
GND
ground
5V supply
VCC
C1
5V supply
VCC
C2
12V supply
12V
C3
Beckhoff New Automation Technology CB4063 page 23
Chapter: Connectors PCI-Express Mini Card with mSATA
Description
Name
Pin
Name
Description
PCIe Wake
PEWAKE#
1 2 S3.3V
3.3V standby supply
reserved
N/C
3 4 MPCIeEN
configuration mPCIe#
reserved
N/C
5 6 1.5V
1.5V supply
clock enable
PEMCLKen#
7 8 N/C
reserved
ground
GND
9
10
N/C
reserved
clock -
PECLKMC#
11
12
N/C
reserved
clock +
PECLKMC
13
14
N/C
reserved
ground
GND
15
16
N/C
reserved
reserved
N/C
17
18
GND
ground
reserved
N/C
19
20
WDISABLE#
wireless disable
ground
GND
21
22
PERST#
PCIe reset
PCIe receive -
PERMC#
23
24
S3.3V
3.3V standby supply
PCIe receive +
PERMC
25
26
GND
ground
ground
GND
27
28
1.5V
1.5V supply
ground
GND
29
30
SMB-CLK
SM-Bus clock
PCIe transmit -
PETMC#
31
32
SMB-DAT
SM-Bus data
PCIe transmit +
PETMC
33
34
GND
ground
ground
GND
35
36
USBMC#
USB -
ground
GND
37
38
USBMC
USB +
3.3V supply
S3.3V
39
40
GND
ground
3.3V supply
S3.3V
41
42
N/C
reserved
ground
GND
43
44
N/C
reserved
reserved
N/C
45
46
N/C
reserved
reserved
N/C
47
48
1.5V
1.5V supply
reserved
N/C
49
50
GND
ground
configuration MSATA
MSATA#
51
52
S3.3V
3.3V standby supply
3.6 PCI-Express Mini Card with mSATA
As a soldering option, the CB4063 can be equipped with PCI-Express Mini Card connector to interface
with approved peripherals, such as Wi-FI and storage cards via miniPCIe. In addition the PCIe Mini Card
connector supports storage modules via mSATA.
page 24 Beckhoff New Automation Technology CB4063
DVI/HDMI/VGA Chapter: Connectors
Description
Name
Pin
Name
Description
Red
Red
1 2 GND
ground
Green
Green
3
4
CS-DDDA
DDC data
Blue
Blue
5
6
CS-DDCK
DDC clock
CS-VSYNC (Vertical
synchronization)
CS-VSYNC
7
8
GND
ground
CS-HSYNC (Horizontal
synchronization)
CS-HSYNC
9
10
GND
ground
5 volt supply
VCC
11
12
GND
ground
Hot Plug Detect
HPD
13
14
N/A
reserved
DDC clock
DDCCLK
15
16
DDCDAT
DDC data +
5 volt supply
VCC
17
18
GND
ground
ground
GND
19
20
TMDSCLK#
TMDS clock -
TMDS data -
TMDS#0
21
22
TMDSCLK
TMDS clock
TMDS data +
TMDS0
23
24
GND
ground
ground
GND
25
26
TMDS#1
TMDS data -
TMDS data -
TMDS#2
27
28
TMDS1
TMDS data +
TMDS data +
TMDS2
29
30
GND
ground
3.7 DVI/HDMI/VGA
The CB4063 provides a DVI/HDMI/VGA interface which is realized as a 2x15pin header
(TFM-115-02-S-D-WT, mating connector e.g. SFM-115-02-S-D-xx).
NOTICE
For parallel use of DVI- and CRT signals a custom cable design will be required. Please ask your
distributor for recommended products.
Pinout 2x15 connector DVI/HDMI/VGA:
Beckhoff New Automation Technology CB4063 page 25
Chapter: Connectors DisplayPort
Description
Name
Pin
Name
Description
Hotplug detect
DPHPD
1 2 HDMIEN
HDMI enable
DP Aux + / EDID Clock
DPAUX/DDCK
3 4 DPAUX#/DDDA
DP Aux - / EDID data
3.3V supply
3.3V
5 6 GND
Ground
Ground
GND
7 8 DPL3#/TMDSCLK#
DP Lane 3 - / HDMI
Clock -
DP Lane 2 - / HDMI 0 -
DPL2#/TMDS0#
9
10
DPL3/TMDSCLK
DP Lane 3 + / HDMI
Clock +
DP Lane 2 + / HDMI 0 +
DPL2/TMDS0
11
12
GND
Ground
Ground
GND
13
14
DPL1#/TMDS1#
DP Lane 1 - / HDMI 1 -
DP Lane 0 - / HDMI 2 -
DPL0#/TMDS2#
15
16
DPL1/TMDS1
DP Lane 1 + / HDMI 1 +
DP Lane 0 + / HDMI 2 +
DPL0/TMDS2
17
18
GND
Ground
Reserved
N/C
19
20
GND
Ground
3.8 DisplayPort
The CB4063 offers a DisplayPort interface which is realized as 2x10pin connector (TFM-110-02-S-D-WT,
mating connector SFM-110-02-S-D-xx). This interface can also be operated in HDMI/DVI mode. To
achieve this, pin 2 must be connected to 3.3V (e.g. pin 5).
Pinout 2x10pin DisplayPort connector:
page 26 Beckhoff New Automation Technology CB4063
USB 2.0 Chapter: Connectors
Description
Name
Pin
Name
Description
5V for USB2
USB2 VCC
1 9 USB3VCC
5V for USB3
USB- data lane 2
USB2#
2
10
USB3#
USB- data lane 3
USB+ data lane 2
USB2
3
11
USB3
USB+ data lane 3
ground
GND
4
12
GND
ground
ground
GND
5
13
GND
ground
USB+ data lane 5
USB5
6
14
USB6
USB+ data lane 6
USB- data lane 5
USB5#
7
15
USB6#
USB- data lane 6
5V for USB5
USB5VCC
8
16
USB6VCC
5V for USB6
3.9 USB 2.0
USB channels 2, 3, 5 and 6 are provided via two 2x8pin connectors (FCI 98424-G52-16LF, mating
connector e.g. FCI 90311-016LF).
All USB-channels support USB 2.0. You may note that the setting of USB keyboard or USB mouse
support in the BIOS-setup is only necessary and advisable, if the OS offers no USB-support. BIOS-setup
can be changed with a USB keyboard without enabling USB keyboard support. Running a USB
supporting OS (such as Microsoft® Windows®) with these features enabled may lead to significant
performance or functionality limitations.
Every USB interface provides up to 500 mA current and is protected by an electronically resettable fuse.
Pinout USB 2, 3, 5 and 6:
Beckhoff New Automation Technology CB4063 page 27
Loading...