Beckhoff AX5203, AX5206, AX5101, AX5103, AX5112 Startup Manual

...
BECKHOFF
Startup
Servo Drive AX5000
(1.5 A – 40 A)
Please read this document carefully before installing and commissioning the servo drive.
-04-01
-5000-0000-0200
1 Foreword BECKHOFF Drive Technology
Notes:
2 Version : 4.5 AX5000
BECKHOFF Drive Technology 1 Foreword
Chapter Page
Table of Contents - AX5000 Startup
1 Foreword ............................................................................................................... 5
1.1 Notes on the documentation ............................................................................... 5
1.2 Disclaimer ........................................................................................................... 5
1.3 Trademarks ........................................................................................................ 5
1.4 Patent Pending ................................................................................................... 5
1.5 Copyright ............................................................................................................ 6
1.6 Documentation issue status ............................................................................... 6
1.7 Appropriate use .................................................................................................. 7
1.7.1 Dual Use (EU 1384/2014) .................................................................................. 7
1.8 Documented servo drives ................................................................................... 8
2 Safety .................................................................................................................... 9
2.1 General safety instructions ................................................................................. 9
2.1.1 Safety rules ........................................................................................................ 9
2.1.2 Disclaimer ........................................................................................................... 9
2.1.3 Description of safety symbols ............................................................................. 9
2.1.4 Personnel qualification ..................................................................................... 10
2.2 Special safety instructions for AX5000 ............................................................. 10
3 Guidelines and Standards ................................................................................. 12
3.1 CE conformity ................................................................................................... 12
3.2 Electromagnetic compatibility ........................................................................... 12
3.3 UL-Listing in USA and Canada ......................................................................... 13
3.3.1 UL-specific chapter changes ............................................................................ 13
3.3.2 UL-specific chapter ........................................................................................... 13
3.3.3 UL-specific notes .............................................................................................. 14
3.4 Electrical isolation according to EN 50178 / VDE 160 ...................................... 14
4 Product description ........................................................................................... 15
4.1 Type code ......................................................................................................... 15
4.2 Scope of supply ................................................................................................ 15
4.2.1 Standard scope of supply ................................................................................. 15
4.2.2 Accessories ...................................................................................................... 16
4.3 Name plate ....................................................................................................... 16
4.4 Technical data .................................................................................................. 17
4.4.1 Permissible ambient and operating conditions ................................................. 17
4.4.2 Electrical data - single-channel servo drive (AX51xx)....................................... 17
4.4.2.1 Single-phase connection .................................................................................. 17
4.4.2.2 Three-phase connection ................................................................................... 18
4.4.3 Electrical data - two-channel servo drive (AX52xx) .......................................... 19
4.4.3.1 Single-phase connection .................................................................................. 19
4.4.3.2 Three-phase connection ................................................................................... 19
4.4.4 Mechanical data (single-channel servo drive) .................................................. 20
4.4.5 Mechanical data (two-channel servo drive) ...................................................... 20
4.5 General overview (AX5101 – AX5112 and AX520x) ........................................ 21
4.6 General overview (AX5118, AX5125 und AX5140) .......................................... 22
4.7 Overview of connectors/terminal points ............................................................ 23
AX5000 Version : 4.5 3
1 Foreword BECKHOFF Drive Technology
4.7.1 X01 - wide voltage input ................................................................................... 23
4.7.2 X02 - DC link (AX5101 - AX5125 und AX520x) ................................................ 23
4.7.3 X02 - DC link (Only AX5140) ............................................................................ 23
4.7.4 X03 - 24 VDC supply ......................................................................................... 23
4.7.5 X04, X05 - EtherCAT connection ..................................................................... 24
4.7.6 X06 – Digital I/Os ............................................................................................. 24
4.7.7 X11 (channel A) , X21 (channel B) - feedback, high-resolution ........................ 25
4.7.8 X12 (channel A) , X22 (channel B) - resolver/hall ............................................ 25
4.7.9 X13 (channel A) , X23 (channel B) - motor connection (power) ....................... 26
4.7.10 X13 - motor connection (power - only AX5140) ................................................ 26
4.7.11 X14 (channel A), X24 (channel B)-motor brake, thermal contact, OCT ............ 26
4.7.12 X07 – internal and external brake resistor ........................................................ 27
4.8 Dimensions ...................................................................................................... 28
5 Installation .......................................................................................................... 30
5.1 Mechanical installation ..................................................................................... 30
5.1.1 Installation in the control cabinet ...................................................................... 30
5.1.1.1 Installation example - AX5101-AX5112 and AX5201-AX5206 ......................... 31
5.1.1.2 Installation example - AX5118, AX5125 and AX5140 ...................................... 31
5.2 Electrical installation ......................................................................................... 32
5.2.1 Mains supply connection (X01) ........................................................................ 33
5.2.1.1 External protection for individual devices, CE-compliant .................................. 33
5.2.1.2 Internal protection, CE-compliant ..................................................................... 33
5.2.1.3 External protection, UL-compliant .................................................................... 34
5.2.1.4 Internal protection, UL-compliant ..................................................................... 34
5.2.1.5 External drive system protection ...................................................................... 35
5.2.2 24 VDC - supply network connection (X03) ....................................................... 36
5.2.3 Connection of several servo drives to form a drive system .............................. 36
5.2.3.1 Connection example - module AX5901 and AX5911 (AX Bridge) .................... 37
5.2.3.2 Connection example - wiring in series without AX Bridge ................................ 38
5.2.4 Configuration example, general ....................................................................... 39
5.2.5 Connection diagram AX5101 – AX5112 and AX520x ...................................... 40
5.2.6 Connection diagram AX5118, AX5125 and AX5140 ........................................ 41
5.3 Motors and cables ............................................................................................ 42
6 Important information for commissioning ....................................................... 43
7 Project planning – important information ........................................................ 44
7.1 Drive train design ............................................................................................. 44
7.1.1 Control quality, mass inertia ratio and load connection .................................... 44
7.2 Energy management ........................................................................................ 44
7.3 EMC, earthing, screen connection and potential .............................................. 45
7.4 Control cabinet ................................................................................................. 45
8 Appendix ............................................................................................................ 46
8.1 Support and Service ......................................................................................... 46
8.1.1 Beckhoff's branch offices and representatives ................................................. 46
8.1.2 Beckhoff Headquarters..................................................................................... 46
8.1.3 Beckhoff Support .............................................................................................. 46
8.1.4 Beckhoff Service .............................................................................................. 46
4 Version : 4.5 AX5000
BECKHOFF Drive Technology 1 Foreword
Hazard to individuals!

1 Foreword

1.1 Notes on the documentation

This description is only intended for trained specialists in control, automation and drive engineering who are familiar with the applicable national standards. It is essential that the following notes and explanations are followed when installing and commissioning these components. The responsible staff must ensure that the application or use of the products described satisfy all the requirements for safety, including all the relevant laws, regulations, guidelines and standards. The "General safety instructions" and "Special safety instructions for AX5000" sections are also essential.
Further and more detailed information regarding the individual sections and
CAUTION
An overview is provided on the inside of the rear cover, which can be folded out.

1.2 Disclaimer

The documentation has been prepared with care. The products described are, however, constantly under development. For this reason, the documentation may not always be have been fully checked for consistency with the performance data, standards or other characteristics described. In the event that it contains technical or editorial errors, we retain the right to make alterations at any time and without warning. No claims for the modification of products that have already been supplied may be made on the basis of the data, diagrams and descriptions in this documentation.
safety can be found in the “AX5000 User manual” on the enclosed CD or can be downloaded from our website at www.beckhoff.com. If you do not have access to the “AX5000 User manual” please refrain from working on the AX5000 and notify our support division.

1.3 Trademarks

Beckhoff®, TwinCAT®, EtherCAT®, Safety over EtherCAT®, TwinSAFE® and XFC® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

1.4 Patent Pending

The EtherCAT Technology is covered, including but not limited to the following patent applications and patents: EP1590927, EP1789857, DE102004044764, DE102007017835 with corresponding applications or registrations in various other countries. The TwinCAT Technology is covered, including but not limited to the following patent applications and patents: EP0851348, US6167425 with corresponding applications or registrations in various other countries.
AX5000 Version : 4.5 5
1 Foreword BECKHOFF Drive Technology
Version
Comment
4.5
New chapter:
4.7.11; 5.2.1.1
4.4
Chapter-Update:
4.4.2; 4.4.3
4.3
New chapter:
1.5; 2.1.2; 4.3; 5.3; 8.1.2
4.2
Deleted chapter:
5.3
4.1
General revision
4.0
General revision on account of the cULus-Listing of the AX5000.
3.9
Chapter-Update:
4.7.4
3.8
Chapter-Update:
4.3; 4.4.1; 4.7.11; 7.5
3.7
Chapter-Update:
1.1; 4.4.4; 5.1.1.2
3.6
Chapter-Update:
2.2; 4.4.2.2; 4.6; 4.7.11
3.5
Chapter-Update: 6
3.4
Chapter-Update:
4.7.11
3.3
New chapter:
4.7.3
3.2
Chapter-Update:
4.7.2
3.1
Chapter-Update:

1.5 Copyright

© Beckhoff Automation GmbH & Co. KG The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization are prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design.

1.6 Documentation issue status

5.2.5; 5.2.6 Chapter-Update:
1.7.1 Chapter-Update:
7.5 New chapter:
4.7.11; 5.2.1.1; 7.5
6 Version : 4.5 AX5000
BECKHOFF Drive Technology 1 Foreword
3.0
Chapter-Update:
1.8; 4.6; 4.7.9; 4.7.11; 7
2.5
Chapter-Update:
4.6.7; 6
2.4
Chapter-Update:
1.3; 1.4
2.3
Chapter-Update:
6
2.2
Chapter-Update:
2.2; 3.1; 4.6.6; 4.6.8; 5.1.1; 5.2.1.5
2.1
Chapter-Update:
4.1; 4.6.6; 5.2.3
2.0
General revision on account of the UL-Listing of the AX5000.
1.3
Chapter-Update:
1.1; 4.4.2.1; 4.4.2.2; 4.4.3.1; 4.4.3.2; 5.2.1; 5.2.1.1
1.2
General routine corrections
1.1
First edition
1.0
only german
Caution – Risk of injury!
brought into a safe state in the event of a fault in the drive system.
4.2.1; 4.4.2.2; 4.4.4; 4.8; 5.1.1.2; 5.2.1.1 New chapter:
1.1; 1.2; 1.5; 4.5; 5.2 New chapter:
2.2; 5.2.3.1 New chapter:

1.7 Appropriate use

The servo drives of the AX5000 series are exclusively designed for torque, speed and position control of suitable asynchronous and synchronous three-phase current motors. The maximum permissible effective motor voltage must be at least equal the effective mains voltage fed into the servo drive. The servo drives from the AX5000 series are designed for installation as components in electrical systems or machines and may be operated only as integrated system or machine components.
Electronic equipment is not fail-safe. The machine manufacturer is
WARNING
The servo drives may only be operated in enclosed control cabinets and in accordance with the conditions described in the "Technical data" section.
responsible for ensuring that the connected motors and the machine are

1.7.1 Dual Use (EU 1384/2014)

As published on December 30, 2014 by EU Commission Delegated Regulation 1382/2014, standard frequency inverters – and with that also Beckhoff products AX5000 – become newly classified Dual-Use items: the item list Annex I of the Dual-Use
AX5000 Version : 4.5 7
1 Foreword BECKHOFF Drive Technology
Council Regulation 428/2009 has been changed accordingly, Frequency inverters (listed in item position 3A225) with „operating frequency of 600 Hz or more“ are now export controlled items. As a consequence some modifications have to be noticed.
Firmware versions without extension (Dual Use) can be used in consideration of Hardware Versions with following drives:
HW Version 1.0 (AX5xxx-0000-x0xx): Serial Number < 68.000
HW Version 2.0 (AX5xxx-0000-x2xx): Serial Number < 140.000
HW Version 2.0 (AX5xxx-0000-x21x)
Firmware versions with extension (Dual Use) can be used in consideration of Hardware Versions with all drives

1.8 Documented servo drives

This documentation describes the following servo drives in the AX5000 range:
AX5101 AX5103 AX5106 AX5112 AX5118 AX5125 AX5140
AX5201 AX5203 AX5206
8 Version : 4.5 AX5000
BECKHOFF Drive Technology 2 Safety
DANGER
Acute risk of injury!
WARNING
Risk of injury!
CAUTION
Hazard to individuals!
Attention
Hazard to devices and environment
Note
Note or pointer
UL pointer
This symbol indicates important information about the UL-compliant.

2 Safety

2.1 General safety instructions

2.1.1 Safety rules

Consider the following safety instructions and descriptions!
Product specific safety instructions are to be found on the following pages or in the areas mounting, wiring, commissioning etc..

2.1.2 Disclaimer

All the components are supplied in particular hardware and software configurations appropriate for the application. Modifications to hardware or software configurations other than those described in the documentation are not permitted, and nullify the liability of Beckhoff Automation GmbH & Co. KG.

2.1.3 Description of safety symbols

The following safety symbols with a adjoining safety advise are used in this manual. You have to read the adjoining safety advice carefully and adhere it strictly.
If you do not adhere the safety advise adjoining this symbol, there is immediate danger to life and health of individuals!
If you do not adhere the safety advise adjoining this symbol, there is danger to life and health of individuals!
If you do not adhere the safety advise adjoining this symbol, there is obvious hazard to individuals!
If you do not adhere the notice adjoining this symbol, there is obvious hazard to materials and environment.
This symbol indicates information that contributes to better understanding.
AX5000 Version : 4.5 9
2 Safety BECKHOFF Drive Technology
Serious risk of injury through high electrical voltage!
safe once the voltage has fallen below 50 V.
Serious risk of injury through hot surfaces!
sufficiently.
WARNING
Danger of injury due to uncontrolled movements!

2.1.4 Personnel qualification

This description is only intended for trained specialists in control, automation and drive engineering who are familiar with the applicable national standards.

2.2 Special safety instructions for AX5000

The safety instructions are designed to avert danger and must be followed during installation, commissioning, production, troubleshooting, maintenance and trial or test assemblies. The servo drives of the AX5000 series are not designed for stand-alone operation and must always be installed in a machine or system. After installation the additional documentation and safety instructions provided by the machine manufacturer must be read and followed.
Never open the servo drive when it is live. Wait until the DC link
WARNING
capacitors are discharged. The voltage measured between the DC+ and DC- terminals (X02) must have fallen below 50 V. Opening the device (with the exception of expansion card slots) invalidates all warranty and liability claims against Beckhoff Automation GmbH.
Negligent, improper handling of the servo drive and bypassing of the safety devices can lead to personal injury or death through electric shock.
Ensure that the protective conductor is connected properly.
Disconnect the servo drive from the mains supply and secure it against
reconnection before connecting or disconnecting the pluggable terminals.
Disconnect the servo drive from the mains supply and secure it against reconnection before working on electrical parts with a voltage > 50 V.
Due to the DC link capacitors dangerous voltage may persist at the DC link contacts "X02" after the servo drive has been disconnected from the mains supply. After disconnecting the servo drive wait 5 minutes and measure the voltage at the DC link contacts DC+ and DC-. The device is
WARNING
10 Version : 4.5 AX5000
The surface temperature may exceed 50 °C, resulting in a risk of burns.
Avoid touching the case during or shortly after operation.
Leave the servo drive to cool down for at least 15 minutes after it is
switched off.
Use a thermometer to check whether the surface has cooled down
Read and take note of chapter 6 ‘Important information for commissioning’ each time before commissioning the AX5000
BECKHOFF Drive Technology 2 Safety
Hazard to individuals!
Directive in national legislation.
Hazard to devices and environment
- Do not touch the motor plug during operation of the AX5000.
Carefully read this manual before using the servo drive thoroughly,
CAUTION
Attention
paying particular attention to the safety instructions. In the event of any uncertainties please notify your sales office immediately and refrain from working on the servo drive.
Only well trained, qualified electricians with sound knowledge of drive equipment may work on the device.
During the electrical installation it is essential to ensure that the correct fuses/protective circuit breakers are used between the mains supply and the servo drive. Further information can be found in the "Electrical installation" section.
If a servo drive is installed in a machine it must not be commissioned until proof of compliance of the machine with the latest version of the EC Machinery Directive has been provided. This includes all relevant harmonised standards and regulations required for implementation of this
During installation it is essential to ensure that the specified ventilation clearances and climatic conditions are adhered to. Further information can be found in the "Technical data" and "Mechanical installation" sections.
If the servo drive is operated in contaminated ambient air, the cooling openings must be checked regularly for blockage. These checks should be carried out several times per day.
The servo drives contain components at risk from electrostatic discharge caused by improper handling:
- Please ensure you are electrostatically discharged before touching the servo drive directly.
- Avoid contact with highly insulating materials (synthetic fibres, plastic film etc.).
- Place the servo drive on a conductive surface.
AX5000 Version : 4.5 11
3 Guidelines and Standards BECKHOFF Drive Technology
Hazard to individuals!
conformity of the complete machine or system.

3 Guidelines and Standards

3.1 CE conformity

The servo drives of the AX5000 series comply with the
EC Low-Voltage Directive, 2006/95/EC
Applied harmonised standards:
61800-5-1
Servo drives are not covered by the EC Machinery Directive. Operation
CAUTION

3.2 Electromagnetic compatibility

The servo drives of the AX5000 series comply with the
2004/108/EC EMC Directive
Applied harmonised standards: IEC / EN 61000-4-2 IEC / EN 61000-4-3 IEC / EN 61000-4-4 IEC / EN 61000-4-5 IEC / EN 61000-4-6 IEC / EN 61000-6-1 IEC / EN 61000-6-2 IEC / EN 61000-6-3 IEC / EN 61000-6-4 IEC / EN 61800-3
of the servo drives in machines or systems is only permitted once the machine or system manufacturers has provided evidence of CE
12 Version : 4.5 AX5000
BECKHOFF Drive Technology 3 Guidelines and Standards
AX5000 with UL-Listing
AX5203 und AX5206
Drive system with UL-Listing!
Please consult our Application Department with respect to the requirements for a drive system with UL-Listing.
Fusing
AX5101
AX5103
AX5106
AX5201
AX5203
AX5206
AC supply (max.) *)
6 A
12 A
20 A
12 A
20 A
20 A
24 V supply (max.)
3 A
Brake resistor
electronic
Fusing
AX
5101
5103
5106
5112
5118
5125
5140
5201
5203
5206
AC suppl (max.)*)
6 A
12 A
20 A
20 A
35 A
45 A
80 A
12 A
20 A
20 A
24 V supply (max.)
3 AT
Brake resistor
elektronisch

3.3 UL-Listing in USA and Canada

The following servo drives from the AX5000 series have a UL-Listing and must bear the CUS symbol
AX5101, AX5103, AX5106, AX5112, AX5118, AX5125, AX5140, AX5201,
on the name plate. If you wish to operate an AX5000 in USA or Canada , please check that there is a CUS symbol on the name plate.
Below is a list of the relevant chapters that are amended with respect to the UL-Listing. Furthermore, UL-specific remarks are listed. It is essential to observe these specifications.

3.3.1 UL-specific chapter changes

“5.2.1 Mains supply connection (X01)”
AX5000 shall be connected only to a grounded wye-source where the maximum voltage does not exceed 277 V to ground.
“5.2.3 Connection of several servo drives to form a drive system”

3.3.2 UL-specific chapter

“5.2.1.3 External protection, UL-compliant”
Integral solid state short circuit protection does not provide branch circuit protection. Branch circuit protection must be provided in accordance with the Manufacture Instructions, National Electrical Code and any additional local codes. Suitable for use on a circuit capable of delivering not more than 18000 rms symmetrical amperes, 480 V maximum, when protected by RK5 class fuses.
Single-phase
*) Mains fuses according to type “RK5” must be used.
Three-phase
*) Mains fuses according to type “RK5” must be used.
AX5000 Version : 4.5 13
3 Guidelines and Standards BECKHOFF Drive Technology
When protected by RK5 class fuses:
Rated 80 A, min. 480 V
Canada!
by Beckhoff Automation.
AX5112
Rated 20 A, min. 480 V
AX5118
Rated 35 A, min. 480 V
AX5125
Rated 45 A, min. 480 V
AX5140

3.3.3 UL-specific notes

Use in a Pollution Degree 2 environment Use 75 °C Copper Conductors min. Control Board rating = 24 V
Drive intended for use over a range of motor sizes. Internal motor overload protection level is adjustable:
The internal motor protection is parameterised via the IDN P-0-0062 “Thermal motor model”, based on the value of the IDN S-0-0111 “Motor continuous stall current”. The IDN P-0-0062 “Time constant” is specified by the motor manufacturer and must be entered here. The IDN P-0-0062 “Warning limit” (Default) is responsible for deciding when a warning is to be generated. The IDN P-0-0062 “Error limit” (Default) is responsible for deciding when the motor is to be switched off. The default values take into account the specific characteristics of the servomotors.
In Canada use only in combination with unit AX2090-TS50, manufactured

3.4 Electrical isolation according to EN 50178 / VDE 160

The power section (motor connection, DC link connection and mains connection) and the control unit are doubly insulated against each other, so that safe protection against accidental contact is ensured at all terminals of the control unit without additional measures. The air and creepage distances also meet the requirements of the above standard.
14 Version : 4.5 AX5000
Loading...
+ 32 hidden pages