WT Super Eco 8514 N
EN
Quick Guide
THANK YOU FOR PURCHASING A BAUKNECHT PRODUCT.
To receive more comprehensive assistance, register the
appliance on www.bauknecht.eu/register
Before using the appliance carefully read the Health and Safety guide.
Before using the machine, it is imperative that the transport bolts are removed. For more
detailed instructions on how to remove them, see the Installation Guide.
CONTROL PANEL
WASH CYCLE TABLE
PRODUCT DESCRIPTION
1.
3.
2.
5.
4.
7.
6.
8.
1. Top
2. Detergent dispenser drawer
3. Control panel
4. Handle
5. Porthole door
6. Drain pump (behind the plinth)
7. Plinth (removable)
8. Adjustable feet (2)
1. ON/OFF button
2. DRYING ONLY button and indicator light
3. CHILD LOCK button and indicator light
4. CLEANING ACTION button
5. CLEANING ACTION indicator lights
6. START/PAUSE button and indicator light
7. DELAY START button and indicator light
8. DRYING button
9. SPIN button
10. TEMPERATURE button
11. WASH CYCLE SELECTOR KNOB
1
11
2
DISPLAY
5
6
7
8
9
10
4
3
DETERGENT DISPENSER DRAWER
Compartment *:
Do not insert detergent in this compartment.
Compartment 1: Washing detergent (powder
or liquid)
If liquid detergent is used, the removable plastic
partition A (supplied) should be used for proper
dosage.
If powder detergent is used, place the partition
into slot B.
Compartment 2: Additives (fabric softeners, etc.)
The fabric softener must not exceed the “MAX” level.
! Use powder detergent for white cotton garments, for pre-washing, and
for washing at temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
1
2
A
B
*
For all testing institutes:
2) Long cotton cycle: set programme 3 at temperature 40°C.
3) Long synthetics cycle: set cycle 4 at a temperature of 40°C.
4) Eco Cotton -
Test wash cycle in compliance with regulations 1061/2010. Set “3” wash cycle
at a temperature of 60°C to access this cycles.
* By selecting the cycle and excluding the spin cycle, the washer-dryer will drain only.
** The duration of the wash cycles can be checked on the display.
*** After programme end and spinning with maximum selectable spin speed, in default
programme setting.
**** If a drying cycle is also programmed, the machine will run a “wash+dry” programme
lasting 45’ and a 1kg laundry load.
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as the
temperature and pressure of the incoming water, ambient temperature, amount of detergent,
load quantity and type, load balancing and any additional options selected.The values given
for programmes other than the Eco 40-60 programme are indicative only.
1) Eco 40-60 (Wash) - Test wash c ycle in compliance with EU Eco design regulat ion
2019/2014. The most ecient programme in terms of energy and water consumption for
washing normally soiled cotton laundry.
Note: spin speed values shown on the display can slightly diers from the values stated in
the table.
Eco 40-60 (Dr ying) -
Test drying cycle in compliance with EU Ecodesign regulation
2019/2014
. To access “wash and dry” cycle select “Eco 40-60” wash programme and set
“Drying” option level to
“
A3
”.
The most ecient programme in terms of energy and water
consumption for washing and drying normally soiled cotton laundry. (Cycle duration: full load
9h:10’ / half load 5h10’).
Maximum load 8 kg
Power input in o mode 0.5 W / in left-on mode 8 W
Detergents and
Additives
Recommended
detergent
Residual
dampness %
(***)
Energy
consumption
kWh
Total water lt
Laundry
temperature °C
Wash cycle
Temperature
Max.
spin speed
(rpm)
Max.
load for
washing
(kg)
Duration
(h : m)
Drying
Max.
load for
drying
(kg)
Wash
Fabric
softener
Powder
Liquid
Setting Range 2 3
1 Anti-Stain Quick 40 °C
- 40 °C
1200 4.5 **
4.5
–
– – – –
2 Anti-Stain 40 °C
- 40 °C
1400 8.0 **
5.0
–
– – – –
3 Cotton (2) 40 °C
- 60 °C
1400 8.0 3:55
5.0
49 1.40 105 45
4 Synthetics (3) 40 °C
- 60 °C
1200 4.0 2:55
4.0
35 0.80 55 43
5 Fast 30’ 30 °C
- 30 °C
800 4.5 0:30 **** 4.5
–
71 0.20 45 27
6 Wash & Dry Mix 40 °C 40 °C 800 3.5 **
3.5
–
– – – –
7 Shirts Wash & Dry 40 °C 40 °C 1000 2.0 **
2.0
–
– – – –
8 Wool 40 °C
- 40 °C
800 2.0 **
2.0
–
– – – –
9 Eco 40-60 (1) 40 °C 40°C
1351 8.0 3:30
5.0
53 0.77 54 33
1351 4 2:45
53 0.65 52 36
1351 2 2:10
53 0.45 37 33
10 20°C 20 °C
- 20 °C
1400 8.0 1:50
5.0
–
49 0.16 90 22
11 Whites 60 °C
- 90 °C
1400 8.0 2:45
5.0
49 0.90 90 55
12 Anti Allergy 60°C 40 °C - 60 °C 1400 5.0 **
5.0
– – – –
13 Steam Refresh – – – 2.0 ** – – – – – – – – – –
14 Ultra Delicates 30 °C
- 30 °C
– 1.0 **
1.0
–
– – – –
Rinse + Spin – – 1400 8.0 **
5.0 –
– – – – – –
Spin + Pump out * – – 1400 8.0 **
5.0 – – – – – – – –
Required dosage Optional dosage
3 Eco Cotton (4) 60 °C 60 °C 1400 8.0 3:45
5.0
53 1.04 60 –
WASH CYCLES
Follow the instructions on the symbols of the garment’s wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.
Anti-Stain Quick: This cycle is ideal for washing daily stains
in 60’. It is ideal for mixed fabrics and coloured garments.
If the drying option is selected, a drying cycle automatically activates at
the end of the wash cycle that resembles open-air drying, with the added
advantages of preserving garments from yellowing due to sunlight
exposure and preventing loss of whiteness caused by the possible
presence of dust in the air. Dryness level “A2” recommended.
Anti-Stain: This cycle is suitable to heavily-soiled garments with resistant
colours. It ensures a washing class that is higher than the standard class (A
class). When running the programme, do not mix garments of dierent
colours. We recommend the use of powder detergent. Pre-treatment with
special additives is recommended if there are obstinate stains.
If the drying option is selected, a drying cycle automatically activates at
the end of the wash cycle that resembles open-air drying, with the added
advantages of preserving garments from yellowing due to sunlight
exposure and preventing loss of whiteness caused by the possible
presence of dust in the air. Dryness level “A2” recommended.
Cotton: Suitable for washing towels, underwear, table cloths, etc. made of
resistant linen and cotton that are moderately to heavily soiled.
Synthetics: Specic for synthetic items. If the dirt is dicult to remove,
the temperature can be increased up to 60° and powder detergent can be
used too.
Fast 30’: For washing lightly soiled garments in a short time. Not suitable
for wool, silk and garments to be washed by hand.
Wash & Dry Mix: use programme 6 to wash and dry mixed garments
(cotton and synthetics). This cycle may be used to wash and dry loads of
up to 3.5 kg; we recommend the use of liquid detergent.
The use of the steam in this programme is optimised to reduce the
formation of creases on garments, making them easier to iron.
Shirts Wash & Dry: Use programme 7 to wash and dry shirts and T-shirts
in dierent fabrics and colours to ensure maximum care. This cycle may
be used to wash and dry loads of up to 2 kg. To achieve optimum results,
use liquid detergent and pre-treat cus, collars and stains. The use of the
steam in this programme is optimised to reduce the formation of creases
on garments, making them easier to iron.
Wool - Woolmark Apparel Care - Green:
The Wool wash cycle of this machine has been approved
by The Woolmark Company for the washing of wool
garments labelled as “hand wash” provided that the
products are washed according to the instructions on the
garment label and those issued by the manufacturer of
this washer-dryer (M1318). The Woolmark logo is a
Certication mark in many countries.
Eco 40-60: For washing normally soiled cotton garments declared to be
washable at 40 °C or 60 °C, together in the same cycle. This is the standard
cotton programme and the most ecient in terms of water and energy
consumption.
20°C: For washing lightly soiled cotton garments, at a temperature of 20 °C.
Whites: For heavily soiled whites and resistant colours.
Anti Allergy: Suitable for removing major allergens such as pollen, mites and
cat or dog hair.
Steam Refresh: For refreshing garments, neutralised unpleasant odours
and relaxing the bres by delivering steam into the drum. The garments
will be damp at the end of the cycle.
Ultra Delicates: For washing very delicate garments. It is advisable to
turn the garments inside out before washing them. For best results, use
liquid detergent on delicate garments.
We recommend turning the garments inside out before washing and
placing small items into the special bag for washing delicates. Use liquid
detergent on delicate garments for best results.
When selecting an exclusively time-based drying function, a drying cycle is
performed at the end of the wash cycle that is particularly delicate, thanks
to light handling and appropriate temperature control of the water jet.
The recommended durations are:
1 kg of synthetic garments --> 150 min
1 kg of synthetic and cotton garments --> 180 min
1 kg of cotton garments --> 180 min
The degree of dryness depends on the load and fabric composition.
Rinse: Designed for rinsing and spinning.
Spin + Pump out: Designed for spinning and draining the water.
Eco Cotton: For washing normally soiled cotton garments at 60°C.
DISPLAY
The display is useful when programming the washer-dryer and provides
plenty of information.
Section A displays the duration of the various available wash cycles and,
once the cycle starts, the time remaining to the latter’s end (the display
will show the maximum duration of the selected cycle which may
decrease after a few minutes, as the actual duration varies in relation to
the laundry load and the chosen settings); if the DELAY START option was
set, the display will show the time remaining to the start of the selected
wash cycle.
Moreover, pressing the relative button allows for visualising the maximum
values for the temperature, spin speed or type of drying relative to the
selected programme or the most recently selected ones, if compatible
with the selected programme.
The “washing phases” relative to the selected cycle and the “washing
phase” of the running cycle appear in section B:
Wash
Rinse
Spin/Drain
Drying
Section C displays – starting from the left – the icons corresponding to
“temperature”, “spin” and “delay start”.
The “temperature” bars indicate the maximum temperature level
that can be selected for the chosen cycle.
The “spin” bars indicate the maximum spin speed that can be
selected for the chosen cycle.
The symbol lights up while the drying settings are being adjusted.
LOCKED DOOR INDICATOR
When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns o before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE
button ; if the symbol is o, the door can be opened.
FIRSTTIME USE
Once the appliance has been installed, and before it is used for the rst
time, run a wash cycle with detergent and no laundry, by setting the
“Auto-Clean” cycle.
DAILY USE
Prepare the laundry by following the suggestions appearing under the
“TIPS AND SUGGESTIONS” section.
- Press the ON/OFF button ; the indicator light relative to START/PAUSE
will ash slowly.
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the wash cycle table.
- Pull out the detergent dispenser drawer and pour the detergent into the
relevant compartments, as described in the “DETERGENT DISPENSER
DRAWER” section.
- Close the door.
- The machine automatically displays the maximum temperature and spin
speed values for the selected cycle, or the most recently used settings if
they are compatible with the selected cycle. Pressing the button
gradually reduces the temperature down to the cold wash “OFF” setting.
Pressing the button gradually reduces the spin speed until it is
completely excluded (“OFF” setting). Pressing the buttons further restores
the maximum allowed values for the selected cycle.
- Select the desired wash cycle.
- Select the desired options.
- Press the START/PAUSE button to start the wash cycle; the relative
indicator light will light up steady and the door will lock ( symbol on).
PAUSING A CYCLE
To pause the wash cycle, press the START/PAUSE button again; the
indicator light will ash. To start the wash cycle from the point at which it
was interrupted, press the START/PAUSE button again.
OPENING THE DOOR, IF NECESSARY
Once a cycle starts, the symbol turns on to signal that the door cannot
be opened. While a wash cycle is running, the door remains locked. To
open the door while a cycle is under way, for example, to add or remove
garments, press the START/PAUSE button to pause the cycle; the
indicator light will ash. If the symbol is not lit, the door may be
opened. Press the START/PAUSE button again to continue the cycle.
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washer-dryer
using the START/PAUSE button (the relative indicator light will ash),
then select the desired cycle and press the START/PAUSE button
again.
! To cancel a cycle that has already begun, press and hold the ON/OFF
button. The cycle will be stopped and the machine will switch o.
AT THE END OF THE WASH CYCLE
This will be indicated by the word “END” on the display; when the
symbol switches o, the door may be opened. Open the door, unload the
laundry and switch o the machine. If you do not press ON/OFF
button, the washing machine will switch o automatically after about a
10 minutes.
B
C
A
Loading...