Bake Max BMREF Titan, BMREF28, BMREF35 Operation Manual

BakeMax BMREF Titan Series

Refrigerated Countertop

Display Operations Manual

Questions? Contact Us:

Toll Free: 1-800-565-2253

Email: [e-mail]

www.BakeMax.com

Warranty Registration

www.BakeMax.com/Warranty-Registration

Warning & Safety

PLEASE READ AND FOLLOW INSTRUCTIONS BELOW TO PREVENT

INJURY OR DAMAGE TO THE PRODUCT

BakeMax® (a registered trademark of Titan Ventures International Inc or TVI) is

not responsible for any harm or injury caused due to any person’s improper or

negligent use of this equipment. The product shall only be operated by someone
over the age of 18, of sound mind, and not under the influence of any drugs or
alcohol, who has been trained in the correct operation of this machine, and is
wearing authorized, proper safety clothing. This machine is intended for
commercial use only. Any modification or miss use to the machine voids any
warranty and may cause harm to individuals using the machine or in the area of
the machine while in operation.

• When using the machine, please ensure that you have read all of the instructions within
this manual.

• Be aware of your surroundings when using this machine, ensure there are no children
or any other persons who are near the machine before operating.

• Do not put hand near moving parts.

• Remove all obstacles, which may interfere with machine functions.

• Keep work area clean and clear of clutter.

• Do not sit or stand on machine.

• Do not wear loose clothing or jewellery when operating machine as it may get caught in

moving parts and cause injury.

• Stop using the machine and have it checked by an authorized service personal if it is not
working properly.

• Disconnect from power source before performing and maintenance or cleaning on the
machine.

• When the machine is not in use, please clean and store properly,

• Do not place any electrical parts or plug / cord in water or liquid.

• If the supply cord is damaged it must be replaced by an authorized service agent in order

to avoid any electrical hazards.

• Keep power cord away from heat.

• Always ensure to follow local laws when operating your machine.

Product Installation & Set Up

• After unpacking and cleaning your new countertop refrigerated showcase. Let it sit upright for at least

24 hours before plugging it in. Never tilt machine more than 45˚. If the unit is laid on its side to be

moved, let the unit sit fully upright for 24 hours before plugging it back in.

• Make sure all accessories are installed (shelves, shelf clips, etc…) before plugging in the unit.

• Ensure the unit is places on a smooth, level flat surface.

• The display case should be kept away from heat, humidity and dusty areas as it can cause stress on

the unit.

• During high humidity days, condensation may be found on the outside of the refrigerator. This is not a
problem, this is caused by high ambient humidity. Simply use a cloth to wipe it. Note: This unit is for
indoor use only.

• Ensure there is at least 6” space available on each side for air to properly circulate around the unit.

• Never block the air suction inlet or air vents.

• Make sure the unit has reached the desired temperature before loading the unit with products.

• Ensure any items that are warm / hot to be cooled before placing in the unit.

• Minimize the time with the door is open and reduce opening and closing frequently.

• Do not overfill the unit or it may hinder its operation.

• Adjust the rack height for proper food storage.

• After power outage or unplugging the refrigerator, always wait at least 5 minutes before starting the

refrigerator again.

• Never put any flammable or explosive items inside the refrigerator such as gasoline or alcohol. Never
put any dangerous product near the refrigerator.

• Do not store medication in the refrigerator.

Warranty Notes: Malfunction due to high ambient temperatures, humidity, or improperly maintained
condenser coil will void the warranty. Failure to properly maintain the unit will also void the warranty. This
includes, but is not limited to, basic preventative maintenance like cleaning the condenser coil. Any damage
that occurs as a result of negligence or improper handling. Overloading or improper loading of the unit in a
manner that prevents proper airflow.

Digital Temperature Controller

The digital temperature controller is easy to operate and controls the compressor.

• The main functions are: Temperature display, manual control, automatic defrost, light control, value
storing, self-testing and parameter locking.
Refrigerant LED Defrost LED